Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Flashlamp-pumped iodine monobromide laser characteristics

The operating characteristics of a flashlamp-pumped IBr laser were investigated to evaluate its suitability for solar-pumped laser applications. A peak power of 350 W/sq cm at 2.7 microns was achieved at 12-torr IBr pressure. At 500-J flashlamp energy, the IBr output saturated; a gain of 0.17% per cm was measured for IBr. Neon was found to be effective for enhancing the recombination of the photodissociation products. With neon as a buffer gas, the laser pulse length was extended to 53 microsec. The termination of the laser pulse, within the flashlamp pulse, is thought to be due to the temperature rise in the gas. Increasing the IBr initial temperature decreased the lasing output. At 300 C, output dropped to approximately one-half the room temperature value. The dominant quencher is thought to be atomic iodine. IBr was found to couple better to the flashlamp energy than C3F7I.

Zapata, L. E.↗
NASA NTRS1983

Tensile stress-strain behavior of hybrid composite laminates

A study was made of the stress-strain response of several hybrid laminates, and the damage was correlated with nonlinear stress-strain response and ultimate strength. The fibers used in the laminates were graphite, S-glass, and Kevlar. Some laminates with graphite fibers had perforated Mylar film between plies, which lowered the interlaminar bond strength. The laminate configurations were chosen to be like those of buffer strips in large panels and fracture coupons. Longitudinal and transverse specimens were loaded in tension to failure. Some specimens were radiographed to reveal damage due to edge effects. Stress-strain response is discussed in terms of damage shown by the radiographs. Ultimate strengths are compared with simple failure criteria, one of which account for damage.

Kennedy, J. M.↗
NASA NTRS1983

Does Venus breathe?

It is speculated that the periodic absorption and desorption of CO2 by the soil of Venus may buffer daily temperature, pressure and wind variations in the lower atmosphere, effectively eliminating the net tidal torque on the atmosphere. The redistribution of mass would still generate a sizable torque, however, which may serve as a balance for that which is caused by the gravitationally induced tide. This novel tidal mechanism represents a somewhat weaker competitor to the atmospheric tides which have previously been studied.

Dobrovolskis, A. R.↗
NASA NTRS1983

Productivity in an evolutionary space station

Space station productivity is treated from a systems point of view, considering the functions and attributes of space station development, formation, and operation that affect productivity. An optimum planning method is needed to assure that the station will have mission flexibility, technology advancement, maintainability, and evolutionary capability. Advanced technology will be designed into the housekeeping and utility functions of the station. Greater risk taking may be allowed into designs if the potential benefits of the advanced system support the risk, and if the system can be buffered from causing a failure cascade throughout the station. A common data base is needed to store and track all designs, developments, and changes in the station subsystems. Systems that can be automated and free the human inhabitants for more productive work are favored, as are modular components that are highly fault-free. Human control must also be possible, especially during check-out and verification, and also for teaching the automated systems new or modified tasks.

Anderson, J. L.↗
NASA NTRS1982

The effect of small temperature gradients on flow in a continuous flow electrophoresis chamber

Continuous flow electrophoresis employs an electric field to separate biological cells suspended in a flowing liquid buffer solution. Good separations based on differences in electrophoretic mobility are obtained only when a unidirectional flow is maintained. The desired flow has a parabolic structure in the narrow dimension of the chamber and is uniform acros the width, except near the edges where the no-slip condition prevails. However, because of buoyancy, very small laterall or axial temperature gradients deform the flow significantly. The results of experiments conducted with a specially instrumented chamber show the origin and structure of the buoyancy-driven perturbations. It is found that very small temperature gradients can disturb the flow significantly, as was predicted by earlier theoretical work.

Rhodes, P. H.↗
NASA NTRS1982

Studies on aqueous two phase polymer systems useful for partitioning of biological materials

The two phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) (PEG) are mixed above a critical concentration of a few percent provide a useful medium for the separation of biological cell subpopulations via partition between the top, PEG-rich phase and the liquid-liquid phase boundary. Interfacial tensions of such systems have been measured by the rotating drop technique and found to range between 0.1-100 micro-N/m. The tension was found to depend on the length of the tie line describing the system on a phase diagram, via a power law relationship which differed depending on the concentration of Na phosphate buffer present. The electrokinetic properties of drops of one phase suspended in the other were studied for a variety of systems. It was found that the droplet electrophoretic mobility increased monotonically with phosphate concentration and drop diameter but exhibited the opposite sign from that anticipated from phosphate partition measurements. It was possible to take advantage of these electrokinetic properties and dramatically enhance the speed of phase separation through application of relatively small electric fields.

Brooks, D. E.↗
NASA NTRS1983

Particle-sampling statistics in laser anemometers Sample-and-hold systems and saturable systems

The effect of the data-processing system on the particle statistics obtained with laser anemometry of flows containing suspended particles is examined. Attention is given to the sample and hold processor, a pseudo-analog device which retains the last measurement until a new measurement is made, followed by time-averaging of the data. The second system considered features a dead time, i.e., a saturable system with a significant reset time with storage in a data buffer. It is noted that the saturable system operates independent of the particle arrival rate. The probabilities of a particle arrival in a given time period are calculated for both processing systems. It is shown that the system outputs are dependent on the mean particle flow rate, the flow correlation time, and the flow statistics, indicating that the particle density affects both systems. The results are significant for instances of good correlation between the particle density and velocity, such as occurs near the edge of a jet.

Edwards, R. V.↗
NASA NTRS1985

Handling Software Requests for Commands

Software component created expressly to provide interface between dedicated command buffer and components requesting command issuance. Component resolves problems that arise when software processes command requests from other subsystems and several requests received at approximately same time.

King, W. G., Jr.↗
NASA NTRS1985

Making Cubic Silicon Carbide Semiconductors

Thin buffer layer of SiC minimizes effects of lattice mismatch. Approach consists of growing single-crystal layer of cubic SiC on single-crystal silicon (Si) wafer by chemical-vapor deposition (CVD). Process developed for production of large-area single-crystal wafers of cubic silicon carbide (SiC) for semiconductor devices; also used to make devices themselves. Applications include electronics for high temperature (up to 900 C) and electronics for very high frequencies.

Powell, J.↗
NASA NTRS1984

The role of gravity in leaf blade curvatures

In the past year we have gained useful information on several aspects of leaf blade growth. The most important observations are as follows: The C(14)-1AA moves preferentially in a gravipositive dorsiventral direction through the blade. This movement is inhibited by inversion of the blade. The responding cells in leaf blade hyponasty are in the lower epidermis and bundle sheath cells. Two additional responses in the leaf were characterized. In addition to blade curvature, the leaf shows petiole curvature and changes in the liminal angle subtended by the pulvinus. Ethylene production was studied under a number of conditions. The blade, rather than the petiole or pulvinus, is the principal site of auxin-promoted ethylene synthesis. The effects of a variety of agents on the blade, including gibberellic acid, abscisic acid, vanadate, low pH buffers, and blue light were reviewed.

Hayes, A. B.↗
NASA NTRS1984

Presynaptic elements involved in the maintenance of the neuromuscular junction

Alterations in the neuromuscular junction were observed in rats preceding loss of muscle mass. In view of the possibility that these alterations involve changes in the secretion of myotrophic agents by presynaptic motor neurons, an investigation was undertaken to characterize a neuronall factor which is thought to be involved in the initiation and maintenance of cholinergic synapses. This factor, which is secreted into the incubation medium by NG108-15 neuroblastoma x glioma hybrid cells, induces the aggregation of nicotinic acetylcholine receptors on primary cultures of rat hindlimb myotubes. Previous attempts to purify this factor failed. Extensive washing of the NG108-15 cells with hepes-buffered salt solution followed by short (4 hour) collection times resulted in the collection of incubation medium containing maximal aggregation activity with as little as 5 ug secreted protein per ml of fresh medium. A three-fold increase in specific activity was obtained after anion exchange chromatography.

Burrows, G. H.↗
NASA NTRS1983

Report of prochloron research, IPE-7 (Palau, February 1982)

Various aspects of Prochloron research are discussed. At suitable low-tide periods about 5-6 new sites were surveyed as possible convenient sources of symbiotic didemnids. The Kanori Channel site peviously surveyed during IPE-VI remains by far the best, in terms of species, quantities and accessibility. Prochloron from the six major species of symbiotic didemnids was compared serum, cell size and vacuolation, etc. Tadpoles from Lissoclinum patella colonies were observed emerging from cloacal apertures; about 400 were collected. All but 4 carried a girdle of symbiotic Prochloron cells (about 40,000 per larva). Observations were made on cell viability indicated that a marked increase in protoplasm viscosity of the cell contents was associated with cell death. Living cells, in 5 microlitres of buffered sea water under a coverslip, when pressed with a 2 kg weight for 10 seconds, attempts made to culture Prochloron in sea-water media.

Lewin, R. A.↗
NASA NTRS1983

The 30-GHz monolithic receive module

Key requirements for a 30 GHz GaAs monolithic receive module for spaceborne communication antenna feed array applications include an overall receive module noise figure of 5 dB, a 30 dB RF to IF gain with six levels of intermediate gain control, a five-bit phase shifter, and a maximum power consumption of 250 mW. The RF designs for each of the four submodules (low noise amplifier, some gain control, phase shifter, and RF to IF sub-module) are presented. Except for the phase shifter, high frequency, low noise FETs with sub-half micron gate lengths are employed in the submodules. For the gain control, a two stage dual gate FET amplifier is used. The phase shifter is of the passive switched line type and consists of 5-bits. It uses relatively large gate width FETs (with zero drain to source bias) as the switching elements. A 20 GHz local oscillator buffer amplifier, a FET compatible balanced mixer, and a 5-8 GHz IF amplifier constitute the RF/IF sub-module. Phase shifter fabrication using ion implantation and a self-aligned gate technique is described. Preliminary RF results obtained on such phase shifters are included.

Sokolov, V.↗
NASA NTRS1983

Comments on laser-excited fluorescence of the hydroxyl radical: Relaxation coefficients at atmospheric pressure, appendix 5

The lifetime of the excited state of a atom or molecule is often determined from the rate of fluorescence decay originating as a function of buffer gas pressure, an accurate determination is made of the rates of collision induced transitions away from the excited state. Deconvolution can in principle be employed to resolve fluorescence times shorter than the response times of the system. However, attainable reproducibility and accuracy in actual experiments usually set a limit beyond which no meaningful results are expected. Prudence thus dictates that the results of deconvolution be viewed with extreme caution whenever fluorescence time much shorter than the response of times of the system are indicated.

Wang, C. C.↗
NASA NTRS1983

A transceiver module of the Mu radar

The transceiver (TR) module of a middle and upper atmospheric radar is described. The TR module used in the radar is mainly composed of two units: a mixer (MIX unit) and a power amplifier (PA unit). The former generates the RF wave for transmission and converts the received echo to the IF signal. A 41.5-MHz local signal fed to mixers passes through a digitally controlled 8-bit phase shifter which can change its value up to 1,000 times in a second, so that the MU radar has the ability to steer its antenna direction quickly and flexibly. The MIX unit also contains a buffer amplifier and a gate for the transmitting signal and preamplifier for the received one whose noise figure is less than 5 dB. The PA unit amplifies the RF signal supplied from the MIX unit up to 63.7 dBm (2350 W), and feeds it to the crossed Yagi antenna.

Kato, S.↗
NASA NTRS1984

Oxygen diffusion in alpha-Al2O3

Oxygen self diffusion coefficients were determined in single crystal alpha-Al2O3 using the gas exchange technique. The samples were semi-infinite slabs cut from five different boules with varying background impurities. The diffusion direction was parallel to the c-axis. The tracer profiles were determined by two techniques, single spectrum proton activation and secondary ion mass spectrometry. The SIMS proved to be a more useful tool. The determined diffusion coefficients, which were insensitive to impurity levels and oxygen partial pressure, could be described by D = .00151 exp (-572kJ/RT) sq m/s. The insensitivities are discussed in terms of point defect clustering. Two independent models are consistent with the findings, the first considers the clusters as immobile point defect traps which buffer changes in the defect chemistry. The second considers clusters to be mobile and oxygen diffusion to be intrinsic behavior, the mechanism for oxygen transport involving neutral clusters of Schottky quintuplets.

Cawley, J. D.↗
NASA NTRS1984

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Ultrasonic attenuation measurements using contact, pulse-echo techniques are sensitive to surface roughness and couplant thickness variations. This can reduce considerable inaccuracies in the measurement of the attenuation coefficient for broadband pulses. Inaccuracies arise from variations in the reflection coefficient at the buffer-couplant-sample interface. The reflection coefficient is examined as a function of the surface roughness and corresponding couplant thickness variations. Interrelations with ultrasonic frequency are illustrated. Reliable attenuation measurements are obtained only when the frequency dependence of the reflection coefficient is incorporated in signal analysis. Data are given for nickel 200 samples and a silicon nitride ceramic bar having surface roughness variations in the 0.3 to 3.0 microns range for signal bandwidths in the 50 to 100 MHz range.

Generazio, E. R.↗
NASA NTRS1983

Metabolic alkalosis during immobilization in monkeys (M. nemestrina)

The systemic and renal acid-base response of monkeys during ten weeks of immobilization was studied. By three weeks of immobilization, arterial pH and bicarbonate concentrations were elevated (chronic metabolic alkalosis). Net urinary acid excretion increased in immobilized animals. Urinary bicarbonate excretion decreased during the first three weeks of immobilization, and then returned to control levels. Sustained increases in urinary ammonium excretion were seen throughout the time duration of immobilization. Neither potassium depletion nor hypokalemia was observed. Most parameters returned promptly to the normal range during the first week of recovery. Factors tentatively associated with changes in acid-base status of monkeys include contraction of extracellular fluid volume, retention of bicarbonate, increased acid excretion, and possible participation of extrarenal buffers.

Young, D. R.↗