A high-pressure rapid compression machine study of n-propylbenzene ignition
Abstract not provided
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Within the framework of the shock-ignition (SI) scheme, ignition conditions are reached following the separation of the compression and heating phases. First, the shell is compressed at a sub-ignition implosion velocity; then an intense laser spike is launched at the end of the main drive, leading to the propagation of a strong shock through the precompressed fuel. The minimal laser energy required for ignition of scaled deuterium-tritium (DT) targets is assessed by calculations. A semi-empiric model describing the ignitor shock generation and propagation in the fuel assembly is defined. The minimal power needed in the laser spike pulse to achieve ignition is derived from the hydrodynamic model. Optimal conditions for ignition of scaled targets are explored in terms of laser intensity, shell-implosion velocity, and target scale range for the SI process. Curves of minimal laser requirements for ignition are plotted in the energy-power diagram. The most economic and reliable conditions for ignition of a millimeter DT target are observed in the 240- to 320-km/s implosion velocity range and for the peak laser intensity ranging from {approx}2 Multiplication-Sign 10{sup 15} W/cm{sup 2} up to 5 Multiplication-Sign 10{sup 15} W/cm{sup 2}. These optimal conditions correspond to shock-ignited targets for a laser energy of {approx}250 kJ and a laser power of 100 to 200 TW. Large, self-ignited targets are particularly attractive by offering ignition at a lower implosion velocity and a reduced laser intensity than for conventional ignition. The SI scheme allows for the compression and heating phases of the high power laser energy research facility target to be performed at a peak laser intensity below 10{sup 16} W/cm{sup 2}. A better control of parametric and hydrodynamic instabilities within the SI scheme sets it as an optimal and reliable approach to attain ignition of large targets.
Application of thermal barrier coatings in spark ignition engines have historically been avoided due to the knock penalty associated with higher surface temperatures induced by the ceramic layer. However, advances in low thermal inertia coatings (i.e. temperature swing coatings) that combine low thermal conductivity with low volumetric heat capacity can prevent excessively high surface temperatures during the intake stroke and reduce or avoid knock while improving performance and efficiency. In this study, a novel coating material was tested in a low compression ratio spark ignition engine to evaluate the performance of an advanced low thermal inertia coating during steady and cold-start conditions. A total of four pistons with this novel material was tested, with an additional piston coated with gadolinium zirconate. Spark timing sweeps demonstrated a maximum 0.8% relative thermal efficiency gain with a thin coating of the novel material. Here, the novel material coated above 200-microns showed a deterioration in performance and efficiency due to charge heating increasing knock propensity. Cold-start tests demonstrated that charge heating is beneficial for reducing unburned hydrocarbons and particle matter emissions.
Rapid compression machine and shock-tube ignition experiments were performed for real fuel/air isobutane mixtures at equivalence ratios of 0.3, 0.5, 1, and 2. The wide range of experimental conditions included temperatures from 590 to 1567 K at pressures of approximately 1, 10, 20, and 30 atm. These data represent the most comprehensive set of experiments currently available for isobutane oxidation and further accentuate the complementary attributes of the two techniques toward high-pressure oxidation experiments over a wide range of temperatures. The experimental results were used to validate a detailed chemical kinetic model composed of 1328 reactions involving 230 species. This mechanism has been successfully used to simulate previously published ignition delay times as well. A thorough sensitivity analysis was performed to gain further insight to the chemical processes occurring at various conditions. Additionally, useful ignition delay time correlations were developed for temperatures greater than 1025 K. Comparisons are also made with available isobutane data from the literature, as well as with 100% n-butane and 50-50% n-butane-isobutane mixtures in air that were presented by the authors in recent studies. In general, the kinetic model shows excellent agreement with the data over the wide range of conditions of the present study. (author)
Recent experiments on the National Ignition Facility (NIF) have demonstrated the facility's power balance capability. Power balance is a measure of the temporal uniformity among multiple beams or beam groups in a multi-beamline laser. Users of the NIF facility will need precise control of the laser for a wide range of experiments. For example, in indirect drive Inertial Confinement Fusion (ICF) experiments, the NIF laser beams will be delivered onto the interior surface of a hohlraum, generating x-rays. In order for the x-rays emitted to be sufficiently uniform to symmetrically compress the spherical ignition capsule at the center of the hohlraum, each beamline needs to precisely deliver the requested temporal power profile to its intended target. The achieved power balance precision is determined by both the accuracy of the pulse shaping hardware and the repeatability of the energetics of the laser. The precision that is required for ICF targets is a function of time and power level during the pulse. We have developed a model that predicts the time-dependent power balance performance of an arbitrary pulse shape. In this model, performance is determined by a handful of dominant terms, whose magnitude we have characterized. The model and the power balance requirements for the current National Ignition Campaign (NIC) as well as the most recent demonstrated performance on 96-beam and full 192-beam NIF shots will be discussed.
Autoignition in HCCI engines is known to be controlled by the combustion kinetics of the in-cylinder fuel/air mixture which is highly influenced by the amount of low-temperature and intermediate-temperature heat release (LTHR and ITHR) that occurs. At lower intake pressures (typically <1.4 bar absolute), it has been observed that gasoline behaves as a single-stage heat release fuel, while at higher intake pressures (typically >1.8 bar absolute) gasoline behaves as a two-stage heat release fuel. Furthermore, ethanol blending into gasoline strongly affects heat release characteristics, and this warrants further investigation. This paper experimentally investigates the conditions under which gasoline transitions from a single-stage heat release fuel to a two-stage heat release fuel as intake pressure is increased. Experiments were performed in single-cylinder HCCI engine fueled with two research-grade gasolines, FACE A and FACE C. These gasolines were tested neat, and with 10% and 20% (by volume) ethanol addition. In addition, these results were compared to results previously obtained for PRF 85, and new results for PRF 84 with 10% and 20% ethanol addition. Moreover, the engine experiments were supported by rapid compression machine (RCM) ignition delay data for the same fuels. The engine experiments revealed that there were minimal differences between the heat release profiles of the two gasolines, FACE A and FACE C, a result which was supported by the RCM experiments that showed similar ignition delay times for the two FACE fuels and PRF 84. On the other hand, with ethanol addition to these gasolines and PRF 84, the occurrence of LTHR shifted to higher intake pressures compared to ethanol-free cases, from 1.4 bar intake pressure for neat fuel to 2.2 bar with 20% ethanol. Consequently, the intake temperatures required to achieve constant combustion phasing for all mixtures were drastically altered. Simulations using a detailed chemical kinetic model were utilized to understand the effects of ethanol blending on the ignition characteristics of PRF 84. The addition of ethanol was found to act as a radical sink where it inhibits the radical pool formation during the low (<850 K) and intermediate (850–1050 K) temperature chemistry regimes resulting in lower reactivity. These results help explain ethanol’s significant antiknock qualities under boosted conditions in spark-ignition engines.
A 5.0L V8 twin-turbocharged direct injection engine was designed, built, and tested for the purpose of assessing the fuel economy and performance in the F-Series pickup of the Dual Fuel engine concept and of an E85 optimized FFV engine. Additionally, production 3.5L gasoline turbocharged direct injection (GTDI) EcoBoost engines were converted to Dual Fuel capability and used to evaluate the cold start emissions and fuel system robustness of the Dual Fuel engine concept. Project objectives were: to develop a roadmap to demonstrate a minimized fuel economy penalty for an F-Series FFV truck with a highly boosted, high compression ratio spark ignition engine optimized to run with ethanol fuel blends up to E85; to reduce FTP 75 energy consumption by 15% - 20% compared to an equally powered vehicle with a current production gasoline engine; and to meet ULEV emissions, with a stretch target of ULEV II / Tier II Bin 4. All project objectives were met or exceeded.
The evolution of thermally generated magnetic fields in a plasma undergoing a nearly spherically symmetric adiabatic compression or expansion is calculated. The analysis is applied to obtain approximate results for the development of magnetic fields in laser-driven compression and explosion of a pellet of nuclear fuel. Localized sources, such as those occurring at composition boundaries in structured pellets or at shock fronts, give stronger fields than those deriving from smoothly distributed asymmetries. Although these fields may approach 10 million G in the late stages of compression, this is not expected to present difficulties for the compression process. Assuming ignition of a nuclear explosion occurs, the sources become much stronger, and values of approximately 10 billion G are obtained at tamper boundaries assuming a 20% departure from spherical symmetry during the explosion.
Currently extensive research on alternative fuels is being conducted due to their increasing demand to reduce greenhouse emissions. One renewable fuel studied in this work is dimethyl ether (DME) blended with propane(C3H8) as a potential mixture for heavy-duty engines used in semi-trucks. The blend has the potential to drastically reduce particulate and greenhouse gas emissions compared to a conventional diesel engine operating under similar conditions. To develop the use of mixture, one must conduct detailed conceptual and simulation studies before progressing to detail studies in CFD, engine modifications, and live testing. For simulations, accurate high-fidelity chemical kinetic models are necessary. However, the validity of the chemical kinetic mechanism for operating conditions of a heavy-duty mixing-controlled compression (MCCI) engine was widely unknown until recent work presented here and published. In this work, we studied the ignition of DME and propane blends in a shock tube under MCCI engine conditions. Ignition delay time (IDT) gathered behind the reflected shock for DME-propane mixtures for heavy-duty compression ignition (CI) engine parameters. Testing was conducted for undiluted varieties spanning from temperatures of 700 to 1100 K at pressures ranging from 55 to 84 bar for various blends (100% CH3OCH3, 100% C3H8, 60% CH3OCH3/ 40% C3H8) of DME and propane were combusted in synthetic air (21% O2/ 79% N2). Several experiments were conducted at higher pressures (90-120 bar) to improve the model performance and accuracy. The ignition delay times (IDTs) were compared to recent mechanisms, including Aramco3.0, NUIG, and Dames et al. A common trend among the mechanisms was overpredicted experimental IDTs. Further studies were conducted by a sensitivity analysis using the Dames et al. model, and critical reactions sensitive to IDTs of DME-propane mixture near 60 bar are outlined. Chemical analysis was conducted on the NTC region to explain chemical kinetics which is critical for developing MCCI heavy duty engines.
The autoignition chemistry of lean n-propylcyclohexane/''air'' mixtures ({phi} = 0.3, 0.4, 0.5) was investigated in a rapid compression machine at compressed gas temperatures ranging from 620 to 930 K and pressures ranging from 0.45 to 1.34 MPa. Cool flame and ignition delay times were measured. Cool flame delay times were found to follow an Arrhenius behavior, and a correlation including pressure and equivalence ratio dependences was deduced. The present ignition delay data were compared with recent experimental results and simulations from the available thermokinetic models in the literature. Negative temperature coefficient zones were observed when plotting ignition delay times versus compressed gas temperature. The oxidation products were identified and quantified during the ignition delay period. Formation pathways for the C{sub 9} bicyclic ethers and conjugate alkenes are proposed. The experimental data provide an extensive database to test detailed thermokinetic oxidation models. (author)
Experiments were carried out to investigate the feasibility of converting a diesel engine to hydrogen-fueled operation without providing a timed ignition system. Use was made of a glow plug and a multiple-strike spark plug. The glow plug was found to provide reliable ignition and smooth engine operation. It caused the hydrogen to ignite almost immediately upon the start of injection. Indicated mean effective pressures were on the order of 1.3 MPa for equivalence ratios between 0.1 and 0.4 at a compression ratio of 18. This is significantly higher than the corresponding result obtained with diesel oil (about 0.6 MPa for equivalence ratios between 0.3 and 0.9). Indicated thermal efficiencies were on the order of 0.4 for hydrogen and 0.20-0.25 for diesel oil. Operation with the multiple-strike spark system yielded similar values for IMEP and efficiency, but gave rise to large cycle-to-cycle variations in the delay between the beginning of injection and ignition. Large ignition delays were associated with large amplitude pressure waves in the combustion chamber. The measured NO(x) concentrations in the exhaust gas were of the order of 50-100 ppm. This is significantly higher than the corresponding results obtained with premixed hydrogen and air at low equivalence ratios. Compression ignition could not be achieved even at a compression ratio of 29.
Explore the source record for details and available documents.
An accurate understanding of burn dynamics in implosions of cryogenically layered deuterium and tritium (DT) filled capsules, obtained partly through precision diagnosis of these experiments, is essential for assessing the impediments to achieving ignition at the National Ignition Facility (NIF). We present measurements of neutrons from such implosions. The apparent ion temperatures (Tion) are inferred from the variance of the primary neutron spectrum. Consistently higher DT than DD Tions are observed, and the difference is seen to increase with increasing apparent DT Tion. The line-of-sight r.m.s. variations of both DD and DT Tion are small, ~150 eV, indicating an isotropic source. DD neutron yields are consistently high relative to the DT neutron yields given the observed Tions. Spatial and temporal variations of the DT temperature and density, DD-DT differential attenuation in the surrounding DT fuel, and fluid motion variations contribute to DT Tion > DD Tion, but are in a 1D model insufficient to explain the data. We hypothesize that in a 3D interpretation, these effects combined could explain the results.
Here the National Ignition Facility (NIF) diagnostic instrument manipulator (DIM) - based high resolution (dHIRES) x-ray spectrometer was used to measure the time evolution of the electron density (n e ) and temperature (T e ) in the hot spot of four NIF compressed capsules with 25 ps time resolution during the 'stagnation' phase. The electron density was inferred by comparing the measured Stark broadening of the krypton (Kr) Heβ spectral complex with theoretical calculations that include ion dynamic effects, and the electron temperature was inferred by comparing the measured ratio of the intensity of a dielectronically excited Li-like Kr line to the intensity of the Kr Heβ resonance line with calculations using the spectroscopic collisional radiative atomic model (SCRAM) and CRETIN collisional-radiative models. The inferred, time averaged n e values mainly agree with n e values from neutron diagnostics within uncertainties, but the neutron time-of-flight values of T ion are consistently higher than dHIRES T e values by 200–700 eV. The dHIRES measurements and measurement techniques, method of uncertainty analysis, and discussion of comparisons with measurements from neutron diagnostics are presented.
A one-dimensional planar compressible-piston-like model is used to investigate the basic physics behind shock-ignition inertial confinement fusion implosions. We discuss the theoretical limit set by rarefaction waves on the maximum hot-spot pressure achievable through conventional compression. Three ignitor shock techniques are presented to mitigate the effects of rarefaction waves, enhance the stagnation hot-spot pressure, and improve the ignition conditions. Elimination of rarefaction waves can lead to an {approx}80% increase in peak implosion pressures, while implosions augmented with ignitor shocks are shown to increase the peak pressures by a factor of {approx}4. These techniques are then discussed and the optimal energy ratio between the initial shell kinetic energy and the ignitor pulse energy is given.
We determine the speeds, and many other physical properties, of flame fronts that propagate inward into degenerate and semidegenerate cores of carbon and oxygen (CO) and neon and oxygen (NeOMg) white dwarfs when such flames are bounded on their exterior by a convective region. Combustion in such fronts, per se, is incomplete, with only a small part of the initial mass function burned. A condition of balanced power is set up in the star where the rate of energy emitted as neutrinos from the convective region equals the power available from the unburned fuel that crosses the burning front. The propagation of the burning front itself is in turn limited by the temperature at the base of the convective shell, while cannot greatly exceed the adiabatic value. Solving for consistency between these two conditions gives a unique speed for the flame. Typical values for CO white dwarfs are a few hundredths of a centimeter per second. Flames in NeOMg mixtures are slower. Tables are presented in a form that can easily be implemented in stellar evolution codes and yield the rate at which the convective shell advances into the interior. Combining these velocities with the local equations for stellar structure, we find a minimum density for each gravitational potential below with the local equations for stellar structure, we find a minimum density for each gravitational potential below which the flame cannot propagate, and must die. Although detailed stellar models will have to be constructed to reslove some issues conclusively, our results that a CO white dwarf inginted at its edge will not burn carbon all the way to its center unless the mass of the white dwarf exceeds 0.8 solar mass. On the other hand, it is difficult to ignite carbon burning by compression alone anywhere in a white dwarf whose mass does not exceed 1.0 solar mass. Thus, compressionally ignited shell carbon burning in an accerting CO dwarf almost certainly propagates all the way to the center of the star. Implications for neutron star formation, and Type Ia supernova models, are briefly discussed. These are also applicable to massive stars in the about 10-12 solar mass range which ignite neon burning off center.
The ignition, oxidation, and pyrolysis chemistry of methyl propyl ether (MPE) was probed experimentally at several different conditions, and a comprehensive chemical kinetic model was constructed to help understand the observations, with many of the key parameters computed using quantum chemistry and transition state theory. Experiments were carried out in a shock tube measuring time variation of CO concentrations, in a flow tube measuring product concentrations, and in a rapid compression machine (RCM) measuring ignition delay times. The detailed reaction mechanism was constructed using the Reaction Mechanism Generator software. Sensitivity and flux analyses were used to identify key rate and thermochemical parameters, which were then computed using quantum chemistry to improve the mechanism. Validation of the final model against the 1-20 bar 600-1500 K experimental data is presented with a discussion of the kinetics. The model is in excellent agreement with most of the shock tube and RCM data. Strong non-monotonic variation in conversion and product distribution is observed in the flow-tube experiments as the temperature is increased, and unusually strong pressure dependence and significant heat release during the compression stroke is observed in the RCM experiments. These observations are largely explained by a close competition between radical decomposition and addition to O2 at different sites in MPE; this causes small shifts in conditions to lead to big shifts in the dominant reaction pathways. The validated mechanism was used to study the chemistry occurring during ignition in a diesel engine, simulated using Ignition Quality Test (IQT) conditions. At the IQT conditions, where the MPE concentration is higher, bimolecular reactions of peroxy radicals are much more important than in the RCM.
An experimental study on autoignition of two binary blends, n-dodecane/1-methylnaphthalene and iso-cetane/1-methylnaphthalene, has been conducted using a rapid compression machine. Specifically, the ignition delays of the stoichiometric blend+air mixtures were measured at elevated pressures of P C = 15 bar and 30 bar, compressed temperatures of T C = 626–944 K, and varying blending ratios of the constituents. For a given set of P C and T C , a nonlinear response of the blend reactivity with respect to the relative amount of the constituents was observed. Since a comprehensive chemical kinetic model for the blends investigated here is under development, the current ignition delay datasets serve as the needed targets for model validation. For selected conditions, ignition delay simulations were conducted to highlight and discuss the deficiencies of the literature models and the potential areas for model improvements, especially at low temperatures. In conclusion, further chemical kinetic analyses were conducted to gain understanding of the blending behavior predicted by the available model.