Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Post-irradiation Examination Plan for ORNL and University of California Santa Barbara Assessment of UCSB ATR-2 Irradiation Experiment

New and existing databases will be combined to support development of physically based models of transition temperature shifts (TTS) for high fluence-low flux (φ < 10 11 n/cm 2 -s) conditions, beyond the existing surveillance database, to neutron fluences of at least 1×10 20 n/cm 2 (>1 MeV). All references to neutron flux and fluence in this report are for fast neutrons (>1 MeV). The reactor pressure vessel (RPV) task of the Light Water Reactor Sustainability (LWRS) Program is working with various organizations to obtain archival surveillance materials from commercial nuclear power plants to allow for comparisons of the irradiation-induced microstructural features from reactor surveillance materials with those from similar materials irradiated under high flux conditions in test reactors

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Benefits of Energy Efficient and Low-Global Warming Potential Refrigerant Cooling Equipment

Hydrofluorocarbons (HFCs) are the fastest growing type of greenhouse gases (GHG) emissions, increasing at an annual rate of 10-15% [1]. HFCs are primarily used as refrigerants in air conditioning and refrigeration equipment and have a global warming potential (GWP) many thousands of times greater than CO 2 . Their rapid growth has led to a global agreement to aggressively phase down their production by amending the Montreal Protocol on Substances that Deplete the Ozone Layer [2]. We quantify the GHG benefits implementing aggressive but economic energy efficiency measures (about 30% more efficient than current technology) in air-conditioning (AC) and large commercial refrigeration equipment (CRE) together with low-GWP refrigerants. Shifting the 2030 world stock of room ACs and CRE from current levels of energy-efficiency and high-GWP refrigerants to “economic” energy efficiency levels and low-GWP refrigerants by 2050 would avoid up to 240.1 GT CO 2e and shifting to “best-available technology” energy efficiency levels and low GWP refrigerants by 2050 would avoid up to 373 GT CO 2e with existing electricity grid emission factors. About two-thirds of this cumulative savings are from reduced electricity sector emissions from improved energy efficiency. Thus, it is highly beneficial to pursue high energy efficiency in concert with the transition to lower GWP refrigerants to achieve maximal GHG reductions with the least amount of equipment re-design and replacement.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Compare low-gain 1D and 3D models toward a storage ring-based X-ray free-electron-laser oscillator

Fourth-generation diffraction-limited synchrotron light sources (DL-SLS) present a compelling platform for advanced light source applications due to their ultra-low emittance (around tens of picometers), sub-micrometer beam stability, and high repetition rates (greater than 1 MHz). Despite these advantages, fundamental limitations, such as long bunch durations (tens of picoseconds), large relative energy spread (~10⁻³), and low peak current (<300 A), have hindered their effectiveness in free-electron laser (FEL) applications. Using a low-gain three-dimensional (3D) model based on NSLS-II upgrade lattice parameters, we demonstrate that a 6% single-pass gain is achievable with an optimized transverse gradient undulator (TGU). Concurrently, recent advances in X-ray optics—specifically, a four-mirror bow-tie resonator utilizing diamond mirrors and beryllium compound refractive lenses (CRLs)—enable total round-trip losses below 4% and an output coupling efficiency near 1%, rendering a Storage Ring based X-ray FEL oscillator (XFELO) a realistic possibility. In the 3D framework, the TGU effectively mitigates the detrimental effects of large energy spread by spatially dispersing the beam, leading to enhanced gain relative to conventional one-dimensional (1D) models. We establish both analytical and numerical connections between the 1D and 3D descriptions, leveraging GENESIS simulations to map equivalent gain conditions. While 1D resonance is defined in the energy domain, the 3D TGU system shifts the resonance dependence to transverse gradient and dispersion parameters. Once optimized, this framework allows predictive modeling using 1D formulas, which can then be validated through full 3D simulations.

43 PARTICLE ACCELERATORS↗

IMPACT OF REDUCING THE 100 C LIQUIDUS TEMPERATURE OFFSET ON WASTE LOADING TARGETS

The objective of this report is to assess the potential impact of reducing conservatism in the implementation of the current liquidus temperature (TL) model in the Product Composition Control System (PCCS) on the ability to target higher waste loadings (WLs) for future sludge batches. No changes to the TL model or the associated uncertainties (model or measurement) are proposed, rather only changes in the magnitude of the offset used between the nominal melt pool temperature (1150 C) and the Property Acceptance Region (PAR) value (1050 C). This strategy is consistent with that outlined and initially assessed by Brown et al. (2001). In that report, the authors stated even a fairly conservative change in this safety factor could have a significant impact on waste loading. The results of this study clearly indicate that the implementation of an 1100 C TL PAR criterion (which translates into a reduction in the TL offset from 100 C to 50 C) can have significantly positive impacts on the ability to gain access to WLs exceeding 45%. This is especially true for those frit and sludge systems that are TL limited using the current 1050 C TL criterion, and are not limited by a second constraint (such as viscosity, nepheline, or durability) until much higher WLs. Examples of various glass forming systems are provided that are currently limited to maximum WLs in the mid-40s, but could be processed in the lower 50s through implementation of this new strategy. One example is in the Sludge Batch 10 (SB10) system, where for a specific glass forming system the projected operating window of 38-41% WL (using the current constraints) became 38-52% WL with the use of an 1100 C TL PAR value. This change both provided access to significantly higher WLs, and transitioned a once infeasible flowsheet to a system that could potentially be processed in the Defense Waste Processing Facility (DWPF). This potential change in the TL constraint also provides access to frit compositions (or glass forming regions) that are not accessible under the current limitations. These new composition regions not only provide access to higher WLs, but may also allow frit development efforts to target other specific properties to support enhanced melter operations. It should be noted that under certain flowsheet conditions, the implementation of the 1100 C TL PAR must be accompanied by a shifting categorization of what is deemed an acceptable operating window for DWPF operation. For example, the use of a 50 C offset may not be effective if access to WLs < 30% are still required. Assuming the intent of implementing the 1100 C PAR criterion is to gain access to higher WLs (> 45%), the need to identify frit and sludge systems that are predicted to form acceptable glasses at these lower WLs (< 30%) should no longer be of concern. Although this strategy could have a significant impact on DWPF's ability to target higher WLs (> 45%), its implementation is not risk free. The reduction in the TL offset does reduce the conservatism currently implemented, which is aimed at minimizing or eliminating the potential for massive devitrification within the melt pool. Prior to implementation of this alternative strategy, DWPF should perform a risk-based assessment or review of this alternative approach to ensure it aligns with needs and processing strategies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

C ii RADIATIVE COOLING OF THE GALATIC DIFFUSE INTERSTELLAR MEDIUM: INSIGHT INTO THE STAR FORMATION IN DAMPED Ly α SYSTEMS

The far-infrared [C ii] 158 μ m fine structure transition is considered to be a dominant coolant in the interstellar medium (ISM). For this reason, under the assumption of a thermal steady state, it may be used to infer the heating rate and, in turn, the star formation rate (SFR) in local as well as in high redshift systems. In this work, radio and ultraviolet observations of the Galactic ISM are used to understand whether C ii is indeed a good tracer of the SFR. For a sample of high Galactic latitude sightlines, direct measurements of the temperature indicate the presence of C ii in both the cold and the warm phases of the diffuse interstellar gas. The cold gas fraction (∼10%–50% of the total neutral gas column density) is not negligible even at high Galactic latitude. It is shown that to correctly estimate the SFR, C ii cooling in both phases should hence be considered. The simple assumption, that the [C ii] line originates only from either the cold or the warm phase, significantly underpredicts or overpredicts the SFR, respectively. These results are particularly important in the context of Damped Ly α systems for which a similar method is often used to estimate the SFR. The derived SFRs in such cases may not be reliable if the temperature of the gas under consideration is not constrained independently.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimizing Integrated Luminosity in a B Factory Storage Ring Using Emittance Control During a Beam Fill

During a fill in a colliding beam storage ring, the beam currents decay which decreases the luminosity and reduces the beam-beam tune shift parameters. In this note we investigate the active control of the vertical and horizontal emittances during a fill in order to keep the beam-beam tune shifts at their maxima thereby maximizing the integrated luminosity over the fill. The beam conditions are complicated by the inter-beam requirements of a asymmetric collider, e.g. PEP-II. Estimates of the increase in integrated luminosity are given and discussions of the required emittance adjustments and control possibilities are included.

43 PARTICLE ACCELERATORS↗

The High-Pressure Characterization of Energetic Materials: 2-Methyl-5-Nitramino-2H-Tetrazole

The isothermal structural properties, equation of state, and vibrational dynamics of 2MNT were studied under high-pressure using synchrotron XRD and optical Raman and IR microspectroscopy. Analysis of the XRD patterns revealed no indication of a phase transition to near 15 GPa and the pressure-volume isotherm remained smooth to 15 GPa. Near 15 GPa, significant sample damage was observed from the X-ray beam which precluded the acquisition of patterns above this pressure. XRD and Raman spectroscopic measurements showed the monoclinic ambient condition phase of 2MNT remains the dominant phase to near 20 GPa, although a shift of the NO{sub 2} IR active vibrational modes to lower frequencies suggested a subtle geometry modification not reflected in the XRD data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

H→γγ as a Triangle Anomaly: Possible Implications for the Hierarchy Problem

The Standard Model calculation of H→γγ has the curious feature of being finite but regulator-dependent. While dimensional regularization yields a result which respects the electromagnetic Ward identities, additional terms which violate gauge invariance arise if the calculation is done setting d = 4. This discrepancy between the d=4 – ϵ and d = 4 results is recognized as a true ambiguity which must be resolved using physics input; as dimensional regularization respects gauge invariance, the d = 4 – ϵ calculation is accepted as the correct SM result. However, here we point out another possibility; working in analogy with the gauge chiral anomaly, we note that it is possible that the individual diagrams do violate the electromagnetic Ward identities, but that the gauge-invariance-violating terms cancel when all contributions to H→γγ, both from the SM and from new physics, are included. We thus examine the consequences of the hypothesis that the d = 4 calculation is valid, but that such a cancellation occurs. We work in general renormalizable gauge, thus avoiding issues with momentum routing ambiguities. We point out that the gauge-invariance-violating terms in d = 4 arise not just for the diagram containing a SM $W^{\pm}$ boson, but also for general fermion and scalar loops, and relate these terms to a lack of shift invariance in Higgs tadpole diagrams. We then derive the analogue of "anomaly cancellation conditions", and find consequences for solutions to the hierarchy problem. In particular, we find that supersymmetry obeys these conditions, even if it is softly broken at an arbitrarily high scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling impacts of changes in temperature and water table on C gas fluxes in an Alaskan peatland: Modeling C Gas Fluxes in Peatland

Northern peatlands have accumulated a large amount of organic carbon (C) in their thick peat profile. Climate change and associated variations in soil environments are expected to have significant impacts on the C balance of these ecosystems, but the magnitude is still highly uncertain. Verifying and understanding the influences of changes in environmental factors on C gas fluxes in biogeochemical models are essential for forecasting feedbacks between C gas fluxes and climate change. In this study, we applied a biogeochemical model, DeNitrification-DeComposition (DNDC), to assess impacts of air temperature (T A ) and water table (WT) on C gas fluxes in an Alaskan peatland. DNDC was validated against field measurements of net ecosystem exchange of CO 2 (NEE) and CH 4 fluxes under manipulated surface soil temperature and WT conditions in a moderate rich fen. The validation demonstrates that DNDC was able to capture the observed impacts of the manipulations in soil environments on C gas fluxes. To investigate responses of C gas fluxes to changes in T A and soil water condition, we conducted a series of simulations with varying T A and WT. The results demonstrate that (1) uptake rates of CO 2 at the site were reduced by either too colder or warmer temperatures and generally increased with increasing soil moisture; (2) CH 4 emissions showed an increasing trend as TA increased or WT rose toward the peat surface; and (3) the site could shift from a net greenhouse gas (GHG) sink into a net GHG source under some warm and/or dry conditions. A sensitivity analysis evaluated the relative importance of T A and WT to C gas fluxes. The results indicate that both T A and WT played important roles in regulating NEE and CH 4 emissions and that within the investigated ranges of the variations in T A and WT, changes in WT showed a greater impact than changes in T A on NEE, CH 4 fluxes, and net C gas fluxes at the study fen.

54 ENVIRONMENTAL SCIENCES↗

Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor

This research explores the effect of a composite support of SiO2 and Al2O3 with Fe and Co incorporated as catalysts for Fischer–Tropsch synthesis (FTS) using a 3D-printed stainless steel (SS) microchannel microreactor. Two mesoporous catalysts, FeCo/SiO2Al2O3 and Co/SiO2Al2O3, were synthesized via a one-pot (OP) method and extensively characterized using N2 physisorption, XRD, SEM, TEM, H2-TPR, TGA-DSC, FTIR, and XPS. H2-TPR results revealed that the synthesis method significantly affected the reducibility of metal oxides, thereby influencing the formation of active FTS sites. SEM-EDS and TEM further revealed a well-defined hexagonal matrix with a porous surface morphology and uniform metal ion distribution. FTS reactions, carried out in the 200–350 °C temperature range at 20 bar with a H2/CO molar ratio of 2:1, exhibited the highest activity for FeCo/SiO2Al2O3, with up to 80% CO conversion. Long-term stability was evaluated by monitoring the catalyst performance for 30 h on stream at 320 °C under identical reaction conditions. The catalyst was initially active for the methanation reaction for up to 15 h, after which the selectivity for CH4 declined. Correspondingly, the C4+ selectivity increased after 15 h of time-on-stream, indicating a shift in the product distribution toward longer-chain hydrocarbons. This trend suggests that the catalyst undergoes gradual activation or restructuring under reaction conditions, which enhances chain growth over time. The increase in C4+ products may be attributed to the stabilization of the active sites and suppression of methane or light hydrocarbon formation.

Biochemistry & Molecular Biology↗

Strong-field two-photon transition by phase shaping

We demonstrate the ultrafast coherent control of a nonlinear two-photon absorption in a dynamically shifted energy level structure. We use a spectrotemporal laser-pulse shaping that is programed to preserve the resonant absorption condition during the intense laser-field interaction. Experiments carried out in the strong-field regime of two-photon absorption in the ground state of atomic cesium reveal that the analytically obtained offset and curvature of a laser spectrum compensate the effect of both static and dynamic energy shifts of the given light-atom interaction.

74 ATOMIC AND MOLECULAR PHYSICS↗

Drought conditioning of rhizosphere microbiome influences maize water use traits

Background and Aims: Beneficial plant–microbe interactions can improve plant performance under drought; however, we know less about how drought-induced shifts in microbial communities affect plant traits. Methods: We cultivated Zea mays in fritted clay with soil microbiomes originating from contrasting environments (agriculture or forest) under two irrigation treatments (well-watered or water limited). Using this design, we investigated whether water conditioning was carried forward through the microbiome to affect a subsequent plant cohort that was subjected to either a well-watered or water limited treatment. Results: Regardless of the microbiome-origin, plants inoculated with a microbiome from a water limited legacy had traits that allowed them to avoid stress but conserve water. They produced longer roots to explore soil, generated greater soil dissolved organic carbon, potentially stimulating the microbiome, and slower soil water content loss during drought. A well-watered legacy resulted in plants that delayed permanent stomatal closure and higher photosynthetic nitrogen use efficiency. In plants with a forest-originated microbiome, a well-watered legacy and water treatment also resulted in higher rates of photosynthesis and stomatal conductance. Conclusion: These results demonstrate that soil microbiomes can be developed to influence plant drought performance, impacting crop resilience, using short-term microbial conditioning.

60 APPLIED LIFE SCIENCES↗

Visible-light-induced instability in amorphous metal-oxide based TFTs for transparent electronics

We investigate the origin of visible-light-induced instability in amorphous metal-oxide based thin film transistors (oxide-TFTs) for transparent electronics by exploring the shift in threshold voltage (V{sub th}). A large hysteresis window in amorphous indium-gallium-zinc-oxide (a-IGZO) TFTs possessing large optical band-gap (≈3 eV) was observed in a visible-light illuminated condition whereas no hysteresis window was shown in a dark measuring condition. We also report the instability caused by photo irradiation and prolonged gate bias stress in oxide-TFTs. Larger V{sub th} shift was observed after photo-induced stress combined with a negative gate bias than the sum of that after only illumination stress and only negative gate bias stress. Such results can be explained by trapped charges at the interface of semiconductor/dielectric and/or in the gate dielectric which play a role in a screen effect on the electric field applied by gate voltage, for which we propose that the localized-states-assisted transitions by visible-light absorption can be responsible.

36 MATERIALS SCIENCE↗

Raman scattering of rhenium for secondary pressure calibration

With the increasing number of 100 s GPa experiments in the diamond anvil cell (DAC), improved accuracy in secondary pressure calibrations to extreme pressures is essential. The rhenium equation of state has been proposed as a pressure calibrant via x-ray diffraction with potentially broad applications as it is commonly used as a gasket material in DAC experiments. In this work, we conducted Raman spectroscopy experiments on rhenium in the DAC and report the pressure shift of the E2g mode, a refined high-pressure C44 and mode-Grüneisen parameter above 200 GPa. We used flat, beveled, and toroidal diamond anvils under quasi-hydrostatic and non-hydrostatic conditions. By measuring the E2g mode from the culet edge to the center, we analyzed pressure distribution based on culet type and distance from the anvil center. The shift in the E2g mode can be expressed as a function of pressure, and diamond edge measurements appear reliable across all anvil types. Comparing the center and edge pressures reveals anvil cupping, offering insights into predicting or preventing anvil failure during materials properties measurements at extreme conditions.

Diamond anvil cells↗

Spontaneous emission of the non-Wiener type

The spontaneous emission of a quantum particle and superradiation of an ensemble of identical quantum particles in a vacuum electromagnetic field with zero photon density are examined under the conditions of significant Stark particle and field interaction. New fundamental effects are established: suppression of spontaneous emission by the Stark interaction, an additional 'decay' shift in energy of the decaying level as a consequence of Stark interaction unrelated to the Lamb and Stark level shifts, excitation conservation phenomena in a sufficiently dense ensemble of identical particles and suppression of superradiaton in the decay of an ensemble of excited quantum particles of a certain density. The main equations describing the emission processes under conditions of significant Stark interaction are obtained in the effective Hamiltonian representation of quantum stochastic differential equations. It is proved that the Stark interaction between a single quantum particle and a broadband electromagnetic field is represented as a quantum Poisson process and the stochastic differential equations are of the non-Wiener (generalized Langevin) type. From the examined case of spontaneous emission of a quantum particle, the main rules are formulated for studying open systems in the effective Hamiltonian representation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduced order modeling of mechanical degradation induced performance decay in lithium-ion battery porous electrodes

In this paper, a one-dimensional computational framework is developed that can solve for the evolution of voltage and current in a lithium-ion battery electrode under different operating conditions. A reduced order model is specifically constructed to predict the growth of mechanical degradation within the active particles of the carbon anode as a function of particle size and C-rate. Using an effective diffusivity relation, the impact of microcracks on the diffusivity of the active particles has been captured. Reduction in capacity due to formation of microcracks within the negative electrode under different operating conditions (constant current discharge and constant current constant voltage charge) has been investigated. At the beginning of constant current discharge, mechanical damage to electrode particles predominantly occurs near the separator. As the reaction front shifts, mechanical damage spreads across the thickness of the negative electrode and becomes relatively uniform under multiple discharge/charge cycles. Mechanical degradation under different drive cycle conditions has been explored. It is observed that electrodes with larger particle sizes are prone to capacity fade due to microcrack formation. Finally, under drive cycle conditions, small particles close to the separator and large particles close to the current collector can help in reducing the capacity fade due to mechanical degradation.

25 ENERGY STORAGE↗

On a strong dense periodicity property of shifts of finite type

There are various definitions of chaotic dynamical systems. The most utilized definition of chaos is Devaney chaos which isolates three components as being the essential features of chaos; transitivity, dense periodic points and sensitive dependence on initial conditions. In this paper, we focus on a strong dense periodicity property i.e. the set of points with prime period at least n is dense for each n. On shift of finite type over two symbols Σ{sub 2}, we show that the strong dense periodicity property implies another strong chaotic notions; locally everywhere onto (also called exact) and totally transitive.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field Performance of Commercial Building Load Flexibility Using Model Predictive Control

Model Predictive Control (MPC) applied to buildings is starting to see some commercial adoption by companies. However, it is hard to estimate if relative energy cost savings are enough to justify the cost of MPC implementation with few reported demonstrations. In small commercial and residential buildings, a one size-fits-all solution can help reduce implementation costs, while in very large buildings or districts the potential energy cost savings magnitude can cover more tailored solutions. This estimation becomes harder for medium to large commercial buildings, where a one-size-fits-all solution cannot be adopted and potential energy cost savings might not be sufficient to cover a tailored solution. Therefore, value propositions in addition to energy efficiency alone can make MPC technology more attractive through additional energy cost savings. One such value proposition is load shifting in response to dynamic electricity prices. On this aspect, MPC is a key technology to unlock building thermal mass for energy flexibility in response to electric grid conditions. This study shows the experimental results of MPC control of an office building in Berkeley, where different dynamic electricity price profiles were used in the MPC objective function to shift the building load and to calculate hypothetical electricity costs. Results show potential 50% cost savings with respect to the existing controller with the dynamic price scenario.

Zanetti, Ettore↗