Search NASA⌕ Search

SEARCH · Search NASA

Results for “dispersion function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Modified Monte Carlo method for study of electron transport in degenerate electron gas in the presence of electron–electron interactions, application to graphene

Standard computational methods used to take account of the Pauli Exclusion Principle into Monte Carlo (MC) simulations of electron transport in semiconductors may give unphysical results in low field regime, where obtained electron distribution function takes values exceeding unity. Modified algorithms were already proposed and allow to correctly account for electron scattering on phonons or impurities. Present paper extends this approach and proposes improved simulation scheme allowing including Pauli exclusion principle for electron–electron (e–e) scattering into MC simulations. Simulations with significantly reduced computational cost recreate correct values of the electron distribution function. Proposed algorithm is applied to study transport properties of degenerate electrons in graphene with e–e interactions. This required adapting the treatment of e–e scattering in the case of linear band dispersion relation. Hence, this part of the simulation algorithm is described in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spatial-frequency Fourier polarimetry of the complex degree of mutual anisotropy of linear and circular birefringence in the diagnostics of oncological changes in morphological structure of biological tissues

Theory of polarisation-correlation analysis of laser images of histological sections of biopsy material from cervix tissue based on spatial frequency selection of linear and circular birefringence mechanisms is formulated. Comparative results of measuring the coordinate distributions of the complex degree of mutual anisotropy (CDMA), produced by fibrillar networks formed by myosin and collagen fibres of cervix tissue in different pathological conditions, namely, pre-cancer (dysplasia) and cancer (adenocarcinoma), are presented. The values and variation ranges of statistical (moments of the first - fourth order), correlation (excess-autocorrelation functions), and fractal (slopes of approximating curves and dispersion of extrema of logarithmic dependences of power spectra) parameters of the CDMA coordinate distributions are studied. Objective criteria for pathology diagnostics and differentiation of its severity degree are determined. (image processing)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Study of the Effects of Different Urban Wind Models on Dispersion Patterns Using Joint Urban 2003 Data

The Quick Urban & Industrial Complex (QUIC) Dispersion Modeling System has been developed to rapidly compute the transport and dispersion of toxic agent releases in the vicinity of buildings. It is composed of a wind solver, an 'urbanized' Lagrangian random-walk model, and a graphical user interface. QUIC has two different wind models: (a) The QUIC-URB wind solver, an empirically-based diagnostic wind model and (b) The QUIC-CFD (RANS) solver, based on the 3D Reynolds-Averaged Navier-Stokes (RANS) equations. In this paper, we discuss the effect of different wind models on dispersion patterns in dense built-up areas. The model-computed wind from the two urban wind models- QUIC-URB and QUIC-CFD are used to drive the dispersion model. The concentration fields are then compared to measurements from the Oklahoma City Joint Urban 2003 field experiment. QUIC produces high-resolution 3-D mean wind and concentration fields around buildings, in addition to deposition on the ground and building surfaces. It has options for different release types, including point, moving point, line, area, and volumetric sources, as well as dense gas, explosive buoyant rise, multi-particle size, bioslurry, and two-phase releases. Other features include indoor infiltration, a pressure solver, outer grid simulations, vegetative canopies, and population exposure calculations. It has been used for biological agent sensor siting in cities, vulnerability assessments for heavier-than-air chemical releases at industrial facilities, and clean-up assessments for radiological dispersal device (RDD) releases in cities (e.g., see Linger et al., 2005; Brown, 2006a, b). QUIC has also been used for dust transport studies (Bowker et al., 2007a) and for the impact of highway sound barriers on the transport and dispersion of vehicle emissions (Bowker et al., 2007b).

54 ENVIRONMENTAL SCIENCES↗

Testing the contribution of dispersal to microbial succession following a wildfire

ABSTRACT Given increased wildfire activity, there is growing interest in understanding the drivers of microbial succession after fire. Dispersal may be especially important to post-fire succession as biotic communities can be more susceptible to invasion following a disturbance. Here, we experimentally manipulated dispersal into disturbed leaf litter communities collected following a wildfire and tracked bacterial and fungal dispersal assemblages over time. We show that the identity and source of microbes immigrating into the soil surface post-fire change across time with seasonal shifts and the reemergence of aboveground vegetation. Further, dispersal significantly contributed to the reassembly of leaf litter microbial communities after the fire, producing an increasingly distinct assembly trajectory. The effect of dispersal on α-diversity and β-diversity was ecosystem dependent but, unexpectedly, influenced bacterial and fungal communities in a similar manner within ecosystems. Collectively, these results demonstrate that dispersal explicitly alters the course of microbial community succession following a wildfire and may impact bacteria and fungi in parallel ways, despite differing in traits expected to alter dispersal patterns. IMPORTANCE Identifying the mechanisms underlying microbial community succession is necessary for predicting how microbial communities, and their functioning, will respond to future environmental change. Dispersal is one mechanism expected to affect microbial succession, yet the difficult nature of manipulating microorganisms in the environment has limited our understanding of its contribution. Using a dispersal exclusion experiment, this study isolates the specific effect of environmental dispersal on bacterial and fungal community assembly over time following a wildfire. The work demonstrates the potential to quantify dispersal impacts on soil microbial communities over time and test how dispersal might further interact with other assembly processes in response to environmental change.

59 BASIC BIOLOGICAL SCIENCES↗

RELATIVISTIC CYCLOTRON INSTABILITY IN ANISOTROPIC PLASMAS

A sufficiently large temperature anisotropy can sometimes drive various types of electromagnetic plasma micro-instabilities, which can play an important role in the dynamics of relativistic pair plasmas in space, astrophysics, and laboratory environments. Here, we provide a detailed description of the cyclotron instability of parallel propagating electromagnetic waves in relativistic pair plasmas on the basis of a relativistic anisotropic distribution function. Using plasma kinetic theory and particle-in-cell simulations, we study the influence of the relativistic temperature and the temperature anisotropy on the collective and noncollective modes of these plasmas. Growth rates and dispersion curves from the linear theory show a good agreement with simulations results.

79 ASTRONOMY AND ASTROPHYSICS↗

Explicit dispersion relations for warm fluid waves in a uniform plasma (invited)

Classical dispersion relations for waves in a fluid plasma are expressed as implicit functions of wave frequency and wave- number. The implicit dispersion relation must in general be solved numerically. This work introduces an astute method for obtaining an explicit dispersion relation for waves in a fluid plasma. The explicit expression has an advantage of providing eigenmodes without numerical computations and giving a dispersion relation more detailed than the implicit expression. As in the case of cold waves, the wavenumber for an arbitrary frequency can be directly obtained from the explicit formula. The explicit formula also enables an accurate evaluation of finite-temperature effects on a dispersion relation even near the cyclotron resonance, where a numerical analysis of the implicit relation is impractical. As a result, the analytic formula can be used to investigate temperature effects on electromagnetic waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ACOUSTIC RECTIFICATION IN DISPERSIVE MEDIA

It is shown that the shapes of acoustic radiation-induced static strain and displacement pulses (rectified acoustic pulses) are defined locally by the energy density of the generating waveform. Dispersive properties are introduced analytically by assuming that the rectified pulses are functionally dependent on a phase factor that includes both dispersive and nonlinear terms. The dispersion causes an evolutionary change in the shape of the energy density profile that leads to the generation of solitons experimentally observed in fused silica.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Acoustic Rectification in Dispersive Media

It is shown that the shapes of acoustic radiation-induced static strain and displacement pulses (rectified acoustic pulses) are defined locally by the energy density of the generating waveform. Dispersive properties are introduced analytically by assuming that the rectified pulses are functionally dependent on a phase factor that includes both dispersive and nonlinear terms. The dispersion causes an evolutionary change in the shape of the energy density profile that leads to the generation of solitons experimentally observed in fused silica.

Cantrell, John H.↗

Dibenzothiophene adsorption at boron doped carbon nanoribbons studied within density functional theory

The adsorption of dibenzothiophene (DBT) on bare and boron-doped armchair carbon nanoribbons (ACNRs) is being investigated in the framework of the density functional theory by implementing periodic boundary conditions that include corrections from dispersion interactions. The reactivity of the ACNRs is characterized by using the Fukui functions as well as the electrostatic potential as local descriptors. Non-covalent adsorption mechanism is found when using the local Perdew-Becke-Ernzerhof functional, regardless of the DBT orientation and adsorption location. The dispersion interactions addition is a milestone to describe the adsorption process. The charge defects introduced in small number (i.e., by doping with B atoms), within the ACNRs increases the selectivity towards sulfur mainly due to the charge depletion at B sites. The DBT magnitude in the adsorption energy shows non-covalent interactions. As a consequence, the configurations where the DBT is adsorbed on a BC{sub 3} island increase the adsorption energy compared to random B arrangements. The stability of these configurations can be explained satisfactorily in terms of dipole interactions. Nevertheless, from the charge-density difference analysis and the weak Bader charge-distribution interactions cannot be ruled out completely. This is why the electronic properties of the ribbons are analyzed in order to elucidate the key role played by the B and DBT states in the adsorbed configurations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Styrene-Based Elastomer Composites with Functionalized Graphene Oxide and Silica Nanofiber Fillers: Mechanical and Thermal Conductivity Properties

The mechanical and thermal conductivity properties of two composite elastomers were studied. Styrene–butadiene rubber (SBR) filled with functionalized graphene oxide (GO) and silica nanofibers, and styrene–butadiene–styrene (SBS) block copolymers filled with graphene oxide. For the SBR composites, GO fillers with two different surface functionalities were synthesized (cysteamine and dodecylamine) and dispersed in the SBR using mechanical and liquid mixing techniques. The hydrophilic cysteamine-based GO fillers were dispersed in the SBR by mechanical mixing, whereas the hydrophobic dodecylamine-based GO fillers were dispersed in the SBR by liquid mixing. Silica nanofibers (SnFs) were fabricated by electrospinning a sol–gel precursor solution. The surface chemistry of the functionalized fillers was studied in detail. The properties of the composites and the synergistic improvements between the GO and SnFs are presented. For the SBS composites, GO fillers were dispersed in the SBS elastomer at several weight percent loadings using liquid mixing. Characterization of the filler material and the composite elastomers was performed using x-ray photoelectron spectroscopy, x-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, dynamic mechanical analysis, tensile testing, nanoindentation, thermal conductivity and abrasion testing.

36 MATERIALS SCIENCE↗

THE VERTICAL MOTIONS OF MONO-ABUNDANCE SUB-POPULATIONS IN THE MILKY WAY DISK

We present the vertical kinematics of stars in the Milky Way's stellar disk inferred from Sloan Digital Sky Survey/Sloan Extension for Galactic Understanding and Exploration (SDSS/SEGUE) G-dwarf data, deriving the vertical velocity dispersion, {sigma}{sub z}, as a function of vertical height |z| and Galactocentric radius R for a set of 'mono-abundance' sub-populations of stars with very similar elemental abundances [{alpha}/Fe] and [Fe/H]. We find that all mono-abundance components exhibit nearly isothermal kinematics in |z|, and a slow outward decrease of the vertical velocity dispersion: {sigma}{sub z}(z, R | [{alpha}/Fe], [Fe/H]) Almost-Equal-To {sigma}{sub z}([{alpha}/Fe], [Fe/H]) Multiplication-Sign exp (- (R - R{sub 0})/7 kpc). The characteristic velocity dispersions of these components vary from {approx}15 km s{sup -1} for chemically young, metal-rich stars with solar [{alpha}/Fe], to {approx}> 50 km s{sup -1} for metal-poor stars that are strongly [{alpha}/Fe]-enhanced, and hence presumably very old. The mean {sigma}{sub z} gradient (d{sigma}{sub z}/dz) away from the mid-plane is only 0.3 {+-} 0.2 km s{sup -1} kpc{sup -1}. This kinematic simplicity of the mono-abundance components mirrors their geometric simplicity; we have recently found their density distribution to be simple exponentials in both the z- and R-directions. We find a continuum of vertical kinetic temperatures ({proportional_to}{sigma}{sup 2}{sub z}) as a function of ([{alpha}/Fe], [Fe/H]), which contribute to the total stellar surface-mass density approximately as {Sigma}{sub R{sub 0}}({sigma}{sup 2}{sub z}){proportional_to} exp(-{sigma}{sup 2}{sub z}). This and the existence of isothermal mono-abundance populations with intermediate dispersions (30-40 km s{sup -1}) reject the notion of a thin-thick-disk dichotomy. This continuum of disk components, ranging from old, 'hot', and centrally concentrated ones to younger, cooler, and radially extended ones, argues against models where the thicker disk portions arise from massive satellite infall or heating; scenarios where either the oldest disk portion was born hot, or where internal evolution plays a major role, seem the most viable. In addition, the wide range of {sigma}{sub z}([{alpha}/Fe], [Fe/H]) combined with a constant {sigma}{sub z}(z) for each abundance bin provides an independent check on the precision of the SEGUE-derived abundances: {delta}{sub [{alpha}/Fe]} Almost-Equal-To 0.07 dex and {delta}{sub [Fe/H]} Almost-Equal-To 0.15 dex. The slow radial decline of the vertical dispersion presumably reflects the decrease in disk surface-mass density. This measurement constitutes a first step toward a purely dynamical estimate of the mass profile of the stellar and gaseous disk in our Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

MOLECULAR CLUMPS AND INFRARED CLUSTERS IN THE S247, S252, AND BFS52 REGIONS

We present results of the observations carried out toward the S247, S252, and BFS52 H II regions with various molecular lines using the 1.85 m radio telescope and the 45 m telescope at Nobeyama Radio Observatory. There are at least 11 young infrared clusters (IR clusters) within the observed region. We found that there are two velocity components in {sup 12}CO (J = 2-1), and also that their spatial distributions show an anti-correlation. The IR clusters are located at their interfaces, suggesting that two distinct clouds with different velocities are colliding with each other, which may have induced the cluster formation. Based on {sup 13}CO (J = 1-0) and C{sup 18}O (J = 1-0) observations, we identified 16 clumps in and around the three H II regions. Eleven of the clumps are associated with the IR clusters and the other five clumps are not associated with any known young stellar objects. We investigated variations in the velocity dispersions of the 16 clumps as a function of the distance from the center of the clusters or the clumps. Clumps with clusters tend to have velocity dispersions that increase with distance from the cluster center, while clumps without clusters show a flat velocity dispersion over the clump extents. A {sup 12}CO outflow has been found in some of the clumps with IR clusters but not in the other clumps, supporting a strong relation of these clumps to the broader velocity dispersion region. We also estimated a mean star formation efficiency of {approx}30% for the clumps with IR clusters in the three H II regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Electromagnetic van Kampen waves

The theory of van Kampen waves in plasma with an arbitrary anisotropic distribution function is developed. The obtained solutions are explicitly expressed in terms of the permittivity tensor. There are three types of perturbations, one of which is characterized by the frequency dependence on the wave vector, while for the other two, the dispersion relation is lacking. Solutions to the conjugate equations allowing one to solve the initial value problem are analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to “Comment on ‘Generalized dispersion relation for electron Bernstein waves in a non-Maxwellian magnetized anisotropic plasma’” [Phys. Plasmas 22, 024701 (2015)]

Sharifi and Parvazian have presented comments on our paper by questioning the validity of the results. The plots of different curves of kappa and (r, q) distributions produced by them are incorrect. They pretended as if we have made claim that our results are valid for large arguments of product of Bessel Function, whereas Neumann's series expansion is valid only for small arguments. In our paper, no claim is made that the results are valid for all values of b. Our results are valid only for b ≪ 1. The results plotted by the commenters are incorrect and in this response we are presenting correct plots of dispersion curves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase Equilibria and Condensed Phase Properties of Fluorinated Alkanes via First Principles Simulations

Vapor liquid equilibria (VLE) of organic compounds is governed by weak non-covalent interactions. This presents a significant challenge in predicting VLE using a first principles approach where density functional theory is used to model system potential. However, a dispersion corrected approach has significantly improved the performance of traditional density functionals. Here, we predict the VLE for a nonpolar carbon tetrafluoride (R14) and polar 1,1,1,2-tetrafluoroethane (R134a)via first principles Gibbs ensemble Monte Carlo simulations using PBED3 density functional. We find that the saturated liquid density for R14 is slightly under predicted for subcritical temperatures, while for R134a it is under predicted at lower reduced temperatures and over predicted at higher reduced temperatures. In the liquid phase, angle-resolved pair correlation functions indicate slight preference for R143a to align in parallel and antiparallel orientation in the first solvation shell.The vibrational spectra reveal peak broadening in the condensed phase due to solvothermal effects. Altogether, we find thePBED3 functional performance is better for the nonpolar molecule as compared to the polar one.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of discreteness effects in cosmological N-body simulations. II. Evolution up to shell crossing

We apply a recently developed perturbative formalism which describes the evolution under their self-gravity of particles displaced from a perfect lattice to quantify precisely, up to shell crossing, the effects of discreteness in dissipationless cosmological N-body simulations. We give simple expressions, explicitly dependent on the particle density, for the evolution of power in each mode as a function of redshift. For typical starting redshifts the effect of finite particle number is to slow down slightly the growth of power compared to that in the fluid limit (e.g., by about 10% at half the Nyquist frequency), and to induce also dispersion in the growth as a function of direction at a comparable level. In the limit that the initial redshift tends to infinity, at fixed particle density, the evolution in fact diverges from that in the fluid limit (described by the Zeldovich approximation). Contrary to widely held belief, this means that a simulation started at a redshift much higher than the redshift of shell crossing actually gives a worse, rather than a better, result. We also study how these effects are modified when there is a small-scale regularization of the gravitational force. We show that such a smoothing may reduce the anisotropy of the discreteness effects, but it then increases their average effect. This behavior illustrates the fact that the discreteness effects described here are distinct from those usually considered in this context, due to two-body collisions. Indeed the characteristic time for divergence from the collisionless limit is proportional to N{sup 2/3}, rather than N/logN in the latter case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamical models of highly flattened oblate elliptical galaxies with De Vaucouleurs' surface-brightness profiles

Two surveys of dynamical models of E6 elliptical galaxies were constructed with de Vaucouleurs'surface-brightness distributions. One set of models has a constant mass-to-light ratio. The other set consists of models embedded in oblate isothermal gravitational potentials. In both sets, the observed axis ratio of the models is 0.55 when viewed edge-on. When viewed edge-on, it is possible to construct models in either potential that have velocity-dispersion profiles that increase or decrease with radius along either or both principal axes. The observational data seem to indicate that dispersion profiles decrease or remain constant as function of radius. The most surprising result of this work is that in order for a model to have velocity-dispersion profiles that decrease with radius out to 1.5 r(e) along both principal axes, it must be dominated by fairly thin-walled tube orbits at large radii. This is very different from the spherical case, where radial orbits dominate at large radii.

Fillmore, James A.↗