Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolution rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Application of a Coincidence Ring Ratio Moderator Correction to the Assay of 235U Residues

Processing of irradiated UAl targets by NaOH dissolution for the extraction of 99Mo results in the creation of high-activity highly enriched uranium (HEU)–bearing residues that must be quantified. The HEU residues generated from this process are assayed using an Active Well Coincidence Counter (AWCC) that has been modified to accommodate >1 Sv/h gamma-ray exposure rates to provide a 235U mass value for each residues container. The HEU residues include a significant amount of residual moderator from the dissolution process. Fission product decay heat drives off much—but not all—of the hydrogen from the dissolution, leaving an unknown moderator content in the residues. The moderator content impacts the induced fission rate in the HEU, detection efficiency, and die-away time of the emitted neutrons and requires implementation of a moderator correction factor. Three moderator correction techniques have been implemented: an active coincidence ring ratio method, a conventional 252Cf Add-A-Source (AAS) measurement, and an AAS ring ratio measurement. The 252Cf AAS and the AAS ring ratio methods are potentially much faster, but they require additional sample handling and precise positioning of the residues container and the 252Cf source. This study was performed using a combination of Monte Carlo N-Particle (MCNP) [1] simulation and measurements. The impact of the moderator content on the AWCC measurement and the relative performance of the three moderator correction methods are presented.

Mcelroy Jr, Robert↗

Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration

There is little agreement about the mechanisms and few direct observations of the transition of cement paste from a slurry to a solid. This paper uses four different imaging techniques at multiple length scales (from 15.6 nm to 1 μm) to follow the three-dimensional microstructural evolution of portland cement, and monoclinic tricalcium silicate (mC 3 S) paste over the first 16 h of hydration. Measurements of over 60,000 particles captured every 10 min were made at the micron scale. Nanoscale examinations of the structure and chemical composition are used to support this work. The results show that hydration products with an average Ca/Si > 3 form on and near the surface of the hydrating particles prior to the acceleration period that appears to control the reaction rate. These hydration products appear to change in chemical composition as more rapid dissolution of C 3 S and formation of hydration products occur during the acceleration period. The findings are used to provide insights into the origin of the induction and acceleration periods during hydration.

36 MATERIALS SCIENCE↗

Pathways for oxygen-isotope exchange in two model oxide clusters

Studies of oxygen-isotope-exchanges in two classes of polyoxoions have uncovered some similarities in reaction steps that are also consistent with mineral-dissolution studies. Here, the molecules were polyoxocations of Group 13 and polyoxoanions of Group 5, and the work was motivated by a desire to understand the dissolution of oxide minerals at the molecular scale. Experimentally, oxygen-isotope-exchange rates are found to be intensely sensitive to single-atom substitutions in the structures, even at sites that are otherwise inert. Exchange rates for different structural oxygen sites span several orders of magnitude, yet most oxygens within a molecule exhibit similar pH dependencies to isotopic exchange and these seem to reflect an average proton affinity of the ion. Single-atom substitutions have a dramatic affect on both the pH dependences of oxygen-isotope-exchanges and the overall reactivity of oxygen sites. Molecular dynamic and electronic-structure calculations identify similar steps in the pathways for exchange – (i) solvation forces cause a near-surface metal to detach from an underlying overbonded oxygen. (ii) This newly undercoordinated metal adds an isotopically normal oxygen as either a water, a hydronium ion or an hydroxide ion. (iii) Protons transfer from these adducts to more basic oxygens in the metastable structure. (iv) The metastability is longlived but access to the metastable state depends on the composition and symmetry of the starting structure, which is why single-atom substitutions are so important. (v) Within the metastable structure, oxygens shuffle positions and the metastable state collapses back into a more stable form. Pathways to form these metastable structures depend on the symmetry and composition of the starting geometry, which probably can't be adequately constrained for meaningful simulation at mineral surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Invariant Forms of Dissolution Fingers

Dissolution of fractured and porous media introduces a positive feedback between fluid flow and reactant transport, leading to the emergence of pronounced, fingerlike channels. We investigate the formation of these structures using a microfluidic Hele-Shaw cell with a soluble bottom. Our experiments show that the shape of dissolution fingers is invariant and reveals itself over time as the fingers extend into the system. Here, by combining reactive-transport theory and conformal mapping techniques we derive these invariant forms. We relate these results to natural dissolution fingers in karst landscapes, and illustrate how to determine the groundwater flow rate responsible for their formation based on the finger shape.

Flows in porous media↗

Leaching kinetics of As, Mo, and Se from acidic coal fly ash samples

Annually, coal-fired electric power plants produce large volumes potentially hazardous coal combustion products (CCPs) including fly ash. Since majority of the coal fly ash and other CCPs deposited in dry land fills or wet lagoons, they pose risk of contamination to local environment and hydrogeology. In this study, we present results of leaching kinetics for As, Mo, and Se from three acidic fly ash samples. This study shows that the leachate concentrations of As, Mo, and Se increase over time. Three kinetics equations, pseudo-second order, Elovich, and power-function, are able to adequately describe the experimental leaching kinetics data. Experimental leaching data and modeling results indicate that the rate limiting leaching of As, Mo, and Se is largely controlled by the dissolution of the fly ash particles. Furthermore, it is important to adopt effective containment/treatment schemes to avoid potential and persistent dispersion of trace elements from ash disposal facilities to surrounding environment for a long time.

54 ENVIRONMENTAL SCIENCES↗

Diagenetic Crystal Growth in the Murray Formation, Gale Crater, Mars

The Pahrump region (Gale Crater, Mars) marks a critical transition between sedimentary environments dominated by alluvial-to-fluvial materials associated with the Gale crater rim, and depositional environments fundamentally linked to the crater's central mound, Mount Sharp. At Pahrump, the Murray formation consists of an approximately 14-meter thick succession dominated by massive to finely laminated mudstone with occasional interbeds of cross-bedded sandstone, and is best interpreted as a dominantly lacustrine environment containing tongues of prograding fluvial material. Murray formation mudstones contain abundant evidence for early diagenetic mineral precipitation and its subsequent removal by later diagenetic processes. Lenticular mineral growth is particularly common within lacustrine mudstone deposits at the Pahrump locality. High-resolution MAHLI images taken by the Curiosity rover permit detailed morphological and spatial analysis of these features. Millimeter-scale lenticular features occur in massive to well-laminated mudstone lithologies and are interpreted as pseudomorphs after calcium sulfate. The distribution and orientation of lenticular features suggests deposition at or near the sediment-water (or sediment-air) interface. Retention of chemical signals similar to host rock suggests that original precipitation was likely poikilotopic, incorporating substantial amounts of the primary matrix. Although poikilotopic crystal growth is common in burial environments, it also occurs during early diagenetic crystal growth within unlithified sediment where high rates of crystal growth are common. Loss of original calcium sulfate mineralogy suggests dissolution by mildly acidic, later-diagenetic fluids. As with lenticular voids observed at Meridiani by the Opportunity Rover, these features indicate that calcium sulfate deposition may have been widespread on early Mars; dissolution of depositional and early diagenetic minerals is a likely source for both calcium and sulfate ion-enrichment in burial fluids that precipitated in ubiquitous late-stage hydrofracture veins

Kah, L. C.↗

Lithium Battery Space Experiment

The In-Space Technology Experiments Program selected the Jet Propulsion Laboratory to conduct a Phase A study of the Lithium Battery Experiment. The experiment will mark the first time a rechargeable lithium battery will be flown in space. The operation of the battery involves lithium deposition and dissolution processed. Micro gravity influences these processes significantly. The experiment will check the rate capability, discharge voltage, capacity and the phenomena affecting cycle life. The paper describes the design and methodology of this experiment.

Mueller, R.↗

Kinetics and Mechanisms of Calcite Reactions with Saline Waters

Project Description: The general objective of the proposed research is to determine the kinetics and mechanisms of calcite reactions with saline waters over a wide range of saline water composition, pCO 2 , and modest ranges in T and P. This will be accomplished by studying both reaction rates and solubility from changes in solution chemistry, and making nanoscale observations of calcite precipitate surface morphology and composition at the micro-to-nano-scale to provide an understanding of controlling reaction mechanisms and pathways. The specific objectives necessary to reach the general objective are: a) determination of how pCO 2 , Ca 2+ , ionic strength and “foreign” ions influence reaction rates; and b) investigate the influence of these parameters on apparent kinetic solubility from dissolution and precipitation reactions. This information will clearly be central to the construction of reliable reaction-transport models to predict reservoir and formation response to increased CO 2 in saline waters. This program was initially collaborative with John Morse at Texas A&M, however his passing shortly after the beginning of this program resulted in abbreviated research time and effort. Summary of Results: Early studies using electron microscopy and spectroscopy indicated that carbonate precipitation from natural seawater (NSW) conditions onto aragonite substrates was mediated by a surface amorphous calcium carbonate layer. It was hypothesized that this ACC layer (observed after < 5days reaction time) was responsible for the abnormal reaction kinetics and also served as a metastable seed layer for growth of epitaxial aragonite. Further studies of the ACC formation mechanism indicated a strong dependence on the Mg concentration in solution. Subsequent studies at shorter times (10 hrs) on calcite substrates and in a wide range of supersaturation conditions did not indicate any ACC layer. Instead, an epitaxial layer by layer growth mechanism was confirmed by grazing incidence X-ray diffraction, µ-Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and electron diffraction. Extended time studies out to 45 days confirmed the epitaxial relationship of the overgrowth layer with the substrate. Under NSW conditions, overgrowths were found to have ~0.4 to 0.8 nm / hr growth rates and accommodating 4 at% Mg, resulting in a highly strained overgrowth layer. Following the initial layer by layer growth mechanism, the growth changes to Stranski-Krastanov type after a critical thickness of approximately 100 nm.

58 GEOSCIENCES↗

Comparison of gamma-gamma Phase Coarsening Responses of Three Powder Metal Disk Superalloys

The phase microstructures of several powder metal (PM) disk superalloys were quantitatively evaluated. Contents, chemistries, and lattice parameters of gamma and gamma strengthening phase were determined for conventionally heat treated Alloy 10, LSHR, and ME3 superalloys, after electrolytic phase extractions. Several of long term heat treatments were then performed, to allow quantification of the precipitation, content, and size distribution of gamma at a long time interval to approximate equilibrium conditions. Additional coarsening heat treatments were performed at multiple temperatures and shorter time intervals, to allow quantification of the precipitation, contents and size distributions of gamma at conditions diverging from equilibrium. Modest differences in gamma and gamma lattice parameters and their mismatch were observed among the alloys, which varied with heat treatment. Yet, gamma coarsening rates were very similar for all three alloys in the heat treatment conditions examined. Alloy 10 had higher gamma dissolution and formation temperatures than LSHR and ME3, but a lower lattice mismatch, which was slightly positive for all three alloys at room temperature. The gamma precipitates of Alloy 10 appeared to remain coherent at higher temperatures than for LSHR and ME3. Higher coarsening rates were observed for gamma precipitates residing along grain boundaries than for those within grains in all three alloys, during slow-moderate quenching from supersolvus solution heat treatments, and during aging at temperatures of 843 C and higher.

Superalloys↗

Atmospheric Dissolved Iron Depostiion to the Global Oceans: Effects of Oxalate-Promoted Fe Dissolution, Photochemical Redox Cycling, and Dust Mineralogy

Mineral dust deposition is suggested to be a significant atmospheric supply pathway of bioavailable iron (Fe) to Fe-depleted surface oceans. In this study, mineral dust and dissolved Fe (Fed) deposition rates are predicted for March 2009 to February 2010 using the 3-D chemical transport model GEOS-Chem implemented with a comprehensive dust-Fe dissolution scheme. The model simulates Fed production during the atmospheric transport of mineral dust taking into account inorganic and organic (oxalate)-promoted Fe dissolution processes, photochemical redox cycling between ferric (Fe(III)) and ferrous (Fe(II)) forms of Fe, dissolution of three different Fe-containing minerals (hematite, goethite, and aluminosilicates), and detailed mineralogy of windblown dust from the major desert regions. Our calculations suggest that during the yearlong simulation is approximately 0.26 Tg (1 Tg = 1012 g) of Fed was deposited to global oceanic regions. Compared to simulations only taking into account proton-promoted Fe dissolution, the addition of oxalate to the dust-Fe mobilization scheme increased total annual model-predicted Fed deposition to global oceanic regions by approximately 75%. The implementation of Fe(II)/Fe(III) photochemical redox cycling in the model allows for the distinction between different oxidation states of deposited Fed. Our calculations suggest that during the daytime, large fractions of Fed deposited to the global oceans is likely to be in Fe(II) form, while nocturnal fluxes of Fed are largely in Fe(III) form. Model simulations also show that atmospheric fluxes of Fed can be strongly influenced by the mineralogy of Fe-containing compounds. This study shows that Fed deposition to the oceans is controlled by total dust-Fe mass concentrations, mineralogy, the surface area of dust particles, atmospheric chemical composition, cloud processing, and meteorological parameters and exhibits complex and spatiotemporally variable patterns. Our study suggests that the explicit model representation of individual processes leading to Fed production within mineral dust are needed to improve the understanding of the atmospheric Fe cycle, and quantify the effect of dust-Fe on ocean biological productivity, carbon cycle, and climate.

Johnson, M. S.↗

Remediation of Technetium in Vadose Zone Sediments Using Ammonia and Hydrogen Sulfide Gases

The feasibility of applying a combination of H 2 S and NH 3 gases for Tc-99 remediation in vadose zone sediments evaluated in laboratory experiments showed a significant mobility decrease from 75 to 95% leachable Tc-99 in untreated sediments to 15 to 48% leachable Tc-99 after gas treatment. Individual H 2 S or NH 3 gas treatment of sediments had little lasting effect. For the combined gas treatment, the H 2 S gas created reducing conditions at the pore water/mineral interface that pertechnetate was temporarily reduced/precipitated. The NH 3 gas created alkaline pore water, which induces some mineral dissolution and subsequent aluminosilicate precipitation as the pH neutralizes, which may coat Tc-99 surface phases and render them less mobile. Surface phase analysis showed Tc-99 associated with weathered basalt clasts and sulfur, possibly from the precipitation of TcS x . Treatment performance was nearly the same at different Tc-99 concentration (34 to 6500 pCi/g), water content (1 to 8%), and gas injection rate, but was sensitive to gas concentrations. Low gas concentrations (< 3%) had insufficient reductant or slower mineral dissolution. High gas concentrations (>30%) formed NH 4 SH precipitate. The 15 - 23% mobile Tc-99 remaining after gas treatment may be caused by limited time for aluminosilicates to precipitate in experiments. Nitrogen species concentrations showed no nitrate or nitrite production and a significant decrease in the sediment microbial population over three months, suggesting nitrification of added ammonia was inhibited. Overall, this study showed that combined H 2 S and NH 3 gas treatment of low water content sediments was a robust technology to significantly decrease Tc-99 mobility.

54 ENVIRONMENTAL SCIENCES↗

Study on hydrogen isotopes permeation in fluidized state of liquid lithium-lead

Lithium-lead (Li-Pb) is one of the most promising candidate materials for the liquid blanket of fusion reactors. Hydrogen transfer under a fluidized condition of Li-Pb is investigated experimentally to design a Li-Pb blanket system. Li-Pb eutectic alloy flows inside a Ni tube in the experimental system, where H{sub 2} permeates into and out of the forced Li-Pb flow. The overall H{sub 2} permeation rate is analyzed using a mass balance model. Hydrogen atoms diffuse in Ni and Li-Pb. The steady-state H{sub 2} permeation rate obtained by this experiment is smaller than the result of the calculation model. A resistance factor is introduced to the present analysis in order to evaluate the influence of other H{sub 2} transfer mechanisms, such as diffusion in Li-Pb and dissolution reaction between Ni and Li-Pb. The contribution of the resistance to the overall H{sub 2} permeation rate becomes large when the flow rate of Li-Pb is low. This is because the boundary layer thickness between Ni and Li-Pb affects the overall H{sub 2} permeation rate. When the flow velocity of Li-Pb increases, the thickness of the boundary layer becomes thin, and the driving force of H{sub 2} permeation through the Ni wall becomes bigger. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microbial Reduction of Intragrain U(VI) in Contaminated Sediment

The accessibility of precipitated, intragrain U(VI) in a contaminated sediment to microbial reduction was investigated to ascertain geochemical and microscopic transport phenomena controlling U(VI) bioavailability. The sediment was collected from the US DOE Hanford site, and contained uranyl precipitates in a form of Na-boltwoodite within the mm-sized granitic lithic fragments in the sediment. Microbial reduction was investigated in a culture of a dissimilatory metal-reducing bacterium (DMRB), Shewanella oneidensis strain MR-1, in bicarbonate solutions at pH 6.8 buffered by PIPES. Measurements of uranium concentration, speciation, and valence in aqueous and solid phases indicated that microbial reduction of intragrain U(VI) proceeded by two mechanisms: 1) sequentially coupled dissolution of intragrain uranyl precipitates, diffusion of dissolved U(VI) out of intragrain regions, and microbial reduction of dissolved U(VI); and 2) U(VI) reduction in the intragrain regions by soluble, diffusible biogenic reductants. The bioreduction rate in the first pathway was over 3 orders of magnitude slower than that in comparable aqueous solutions containing aqueous U(VI) only. The slower bioreduction rate was attributed to: 1) the release of calcium from the desorption/dissolution of calcium-containing minerals in the sediment, which subsequently altered U(VI) aqueous speciation and slowed U(VI) bioreduction and 2) alternative electron transfer pathways that reduced U(VI) in the intragrain regions and changed its dissolution and solubility behavior. The results implied that the overall rate of microbial reduction of intragrain U(VI) will be influenced by the reactive mass transfer of U(VI) and biogenic reductants within intragrain regions, and geochemical reactions controlling major ion concentrations that affect U(VI) aqueous speciation and microbial activity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fundamental benchmarking of the discharge properties of negative electrodes in lead acid batteries

The unprecedented scale of energy storage deployment needed to allow high penetration of intermittent renewable energy sources into the electrical grid places significant economic cost and performance targets on battery technologies. Lead batteries, owing to their highly abundant and inexpensive raw materials, can be considered an important solution to grid storage as long as they achieve high material utilization, fast recharge rates, and long cycle life. To address the limitations in material utilization, we need to revisit the electrochemical processes during the discharge step and answer the following question: what are the fundamental limits of the discharge reaction? In this work we discuss how well-defined lead metal surfaces with nanometer scale roughness allow us to resolve the accessible discharge capacity for both faradaic and non-faradaic processes as a function of electrolyte concentration and in the presence of traditional additives. The direct connection between PbSO 4 layer morphology and discharge rates gives us important insights on the mechanism of discharge as related to the dissolution and passivation events. In conclusion, this work sets the stage for reimagining the design of lead batteries with implications to grid storage applications.

25 ENERGY STORAGE↗

Building Materials from Colloidal Nanocrystal Assemblies: Molecular Control of Solid/Solid Interfaces in Nanostructured Tetragonal ZrO 2

We describe in this paper a bottom-up approach to control the composition of solid/solid interfaces in nanostructured materials, and we test its effectiveness on tetragonal ZrO 2 , an inorganic phase of great technological significance. Colloidal nanocrystals capped with trioctylphosphine oxide (TOPO) or oleic acid (OA) are deposited, and the organic fraction of the ligands is selectively etched with O 2 plasma. The interfaces in the resulting all-inorganic colloidal nanocrystal assemblies are either nearly bare (for OA-capped nanocrystals) or terminated with phosphate groups (for TOPO-capped nanocrystals) resulting from the reaction of phosphine oxide groups with plasma species. The chemical modification of the interfaces has extensive effects on the thermodynamics and kinetics of the material. Different growth kinetics indicate different rate limiting processes of growth (surface diffusion for the phosphate-terminated surfaces and dissolution for the “bare” surfaces). Phosphate termination led to a higher activation energy of growth, and a 3-fold reduction in interfacial energy, and facilitated significantly the conversion of the tetragonal phase into the monoclinic phase. Finally, films devoid of residual ligands persisted in the tetragonal phase at temperatures as high as 900 °C for 24 h.

36 MATERIALS SCIENCE↗

Directly monitoring the shift in corrosion mechanisms of a model FeCrNi alloy driven by electric potential

Abstract Stainless steels are used in a myriad of engineering applications, including construction, automobiles, and nuclear reactors. Developing accurate, predictive mechanistic models for corrosion and electrochemical corrosion kinetics of stainless steels has been a topic of research studies over many decades. Herein, we quantified the aqueous corrosion kinetics of a model austenitic Fe–18Cr–14Ni (wt%) alloy in the presence and absence of applied potential using systematic in situ electrochemical atomic force microscopy (EC-AFM) and transmission electron microscopy (TEM). Without an applied bias, vertical dissolution of corrosion pits is controlled by the surface kinetics/diffusion hybrid mechanism, whereas lateral dissolution is diffusion controlled. When an electric bias is applied, the increase in corrosion rate is dominated by the nucleation of new pits. These insights gained by the in situ EC-AFM will allow applications of this method for a quantitative understanding of corrosion of a wider class of materials.

36 MATERIALS SCIENCE↗