Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Single-phase Ru 1- x-y Mn x Co y O 2 nanoparticles as highly effective oxygen reduction electrocatalysts in alkaline media with enhanced stability and fuel-tolerance

Here, a series of single-phase binary and ternary ruthenium and transition metal oxide nanoparticles supported on Vulcan - Ru 1-x MnxO2/C, Ru1-xCoxO 2 /C, Ru 1-x-y MnxCo y O 2 /C, Ru 1-x Fe x O 2 /C, Ru 1-x Ni x O 2 /C and Ru 1-x V x O 2 /C, as well as RuO 2 /C, MnO 2 /C, Co 3 O 4 /C and Mn 3-x Co x O 4 /C - were synthesized via a facile method and studied for their oxygen reduction reaction (ORR) activity in alkaline media. Single-phase Ru 1-x Mn x O 2 /C, Ru 1-x-y Mn x Co y O 2 /C and Ru 1-x Co x O 2 /C catalysts significantly boosted ORR kinetics in alkaline media. Moreover, they were H 2 and methanol tolerant, and exhibited long term stability due to their single-phase structure. Ru 0.85 Mn 0.15 O 2 /C stood out as the most active catalyst among them. A volcano relationship of the ORR activity of these binary and ternary metal oxide catalysts vs. the O adsorption energy was found, with the maximum activity observed for the Ru 1-x Mn x O 2 /C, Ru 1-x-y Mn x Co y O 2 /C and Ru 1-x Co x O 2 /C catalysts due to their optimal O binding energy. These materials have potential applications as highly active ORR catalysts in alkaline fuel cells and metal-air batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precisely doping the surface of tin-based electrocatalysts for improved CO 2 conversion to liquid chemicals

Doping tin catalysts with sulfur can improve the electrochemical CO 2 conversion into formate/formic acid, but the lack of composition-dependent activity trends hinders further catalyst development. Here, we precisely controlled the composition of sulfur-doped Sn catalysts to show that sulfur doping only improves CO 2 conversion over a very narrow composition range, achieving maximum activity at 1.4 at% S. In situ Raman spectroscopy indicted working catalysts were in a primarily metallic state (e.g. S-Sn), and we achieved some of the highest reported partial current densities in both H-cell and full-cell electrolyzer configurations. Density Functional Theory calculations predicted S atoms preferentially occupied the catalyst surface and improved CO 2 reduction by localizing charge density at the catalyst/intermediate interface, which stabilized the *OCOH intermediate and lowered the CO 2 conversion thermodynamic barrier. Our work quantifies the composition-dependent influence of S dopants on Sn-based CO 2 reduction catalysts and provides a pathway for maximizing their CO 2 conversion activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗

Self-terminating electrodeposition of Pt on WC electrocatalysts

Self-terminated electrochemical deposition is used to grow Pt nanoparticles on tungsten monocarbide (WC) from a pH 4 electrolyte of 3 mmol/L K 2 PtCl 4 -0.5 mol/L NaCl. An unconventional potentiodynamic deposition program is used where nucleation is promoted at large over potentials followed by growth termination at still larger over potentials to yield a high coverage of Pt nanoparticles. Following three deposition cycles between –0.8 V SCE and –0.45 V SCE , the surface is covered by a monolayer equivalent charge of Pt in the form of ≈3×10 11 particles/cm2 that are ≈6.7 ± 1.1 nm in diameter. The number and size of nanoparticles increase monotonically for five deposition cycles. Area-normalized kinetics for hydrogen evolution (HER) and oxidation (HOR) on Pt-WC were determined in 0.5 mol/L H 2 SO 4 . For the lowest surface coverage of Pt nanoparticles on WC, ≈ 0.01, an exchange current density of ≈ 100 mA/cm 2 is achieved, comparable to the highest reported values for Pt nanoparticles and ultra microelectrodes. The area normalized apparent exchange current density decreases with increasing Pt coverage as the relative contribution of point versus planar diffusion decreases. Self-terminated electrodeposition of Pt provides an attractive approach to achieving ultra-low loadings of well-dispersed Pt nanoparticles on a non-precious metal support like WC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient BiVO 4 /CoFeO x H y photoanodes using controlled annealing and conformal linear-sweep electrocatalyst photodeposition

Although monoclinic bismuth vanadate (BiVO 4 ) is a promising photoanode for solar water splitting, its practical use is hindered by imperfect photocurrent generation/collection, low photovoltage compared to the bandgap, and corrosion side reactions that limit durability. Here, we introduce a controlled-annealing sol–gel process for BiVO 4 thin-film photoanodes along with an optimized linear-sweep-voltammetry photodeposition of CoFeO x H y cocatalysts. The resulting BiVO 4 films annealed at 550 °C exhibited a photocurrent density of 4.1 mA/cm 2 at 1.23 V RHE under 1 sun AM 1.5G solar simulation and a low onset potential of 0.26 V RHE due to high majority carrier conductivity, a crystalline bulk with reduced defects as evidenced by x-ray photoelectron spectroscopy and photoluminescence lifetime analysis, and thus enhanced photocarrier collection. However, significant degradation in performance was found due to interfacial photocorrosion. To protect the surface and speed the oxygen-evolution reaction CoFeO x H y cocatalyst layers were deposited. By varying the number of consecutive sweeps and adjusting the applied bias range, an ultra-thin (~15 nm) CoFeO x H y cocatalyst layer was uniformly grown deposited over 30 cycles on the BiVO 4 surface. The resulting BiVO 4 /CoFeO x H y yielded 4.03 mA/cm 2 at 1.23 V RHE and onset potential of 0.24 V RHE , with stable operation (~15 % loss in photocurrent at 1.23 V RHE relative to ~60 % loss in the uncatalyzed control sample). These conformal CoFeO x H y catalytic layers function simultaneously to selectively collect photoexcited holes from the BiVO 4 , catalyze the water-oxidation reaction, and protect the BiVO 4 from photodegradation.

42 ENGINEERING↗

Highly durable fuel cell electrocatalyst with low-loading Pt-Co nanoparticles dispersed over single-atom Pt-Co-N-Graphene nanofiber

The limited durability of Pt electrocatalysis toward cathodic oxygen reduction reaction remains challenging, yet crucial for the development of Proton Exchange Membrane Fuel Cell. Here, we present a rational design of a robust catalyst consisting of PtCo nanoparticles supported on Pt-Co-N-graphene nanofiber prepared through electrospun Cobalt-Metal-Organic-Framework. The catalyst delivers unprecedented mass activity of 2.48 A·mgPt -1 , and retains 80% of initial value after 60,000 Accelerated-Stress-Test cycles. Operando X-ray absorption spectroscopies show that the electronic configurations of Pt sites in PtCo and Co sites in Co-N4 in the hybrid catalyst are modified toward high catalytic activities. Density Functional Theory unveils that the enhanced curvature of the substrate induced by the morphology engineering lowers the reaction thermodynamic barrier on Co-N4 sites, favoring the formation of H2O and suppressing that of H2O2. This result along with the strong affinity of PtCo nanoparticles to the Pt-Co-N-graphene fiber endows the catalyst an exceptional durability.

acidic electrolyte↗

Rational design of platinum-group-metal-free electrocatalysts for oxygen reduction reaction

Platinum-group-metal (PGM)-free materials have been promised as potential replacement for Pt as the cathodic catalyst in proton exchange membrane fuel cells. Critical design criteria of the PGM-free catalyst reside on the high active site density to compensate its generally lower turn-over frequency and improved mass-charge transfers during the electrocatalysis. Herein, this short review summarizes the research activities in recent years from our team at Argonne National Laboratory in preparing highly active oxygen reduction reaction (ORR) catalysts using rationally designed porous organic precursors, as reported in the First Telluride Science Research Center (TSRC) Workshop on PGM-free Electrocatalysis in 2019. More recent studies by others are also discussed.

25 ENERGY STORAGE↗

Platinum group metal-free Fe-based (Fe-N-C) oxygen reduction electrocatalysts for direct alcohol fuel cells

In direct alcohol fuel cells (DAFCs), the oxidation of alcohols happens at the expenses of the oxygen reduction reaction at the cathode. DAFCs' cathodes use a significant amount of platinum that is an expensive critical raw material. Moreover, platinum oxidizes alcohols, a fact that combined with alcohol crossover, decreases significantly the performance of the cells. The use of Fe-based (Fe-N-C) platinum group metal–free (PGM-free) cathodes is a convenient strategy to overcome these limitations. This review analyzes the application of PGM-free cathodes to DAFCs. The discussion focuses on acidic systems and covers the following subjects: (i) the breakdown of DAFC potential in its components, (ii) the analysis of the advantages from the use of the PGM-free cathode, and (iii) a review of the performance and durability of DAFCs. Finally, the review closes with a view of the authors of the future perspective for the research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Li ions on the oxygen reduction reaction of platinum electrocatalyst

A Li-air battery can provide a much higher theoretical energy density than a Li-ion battery. The use of aqueous acidic electrolytes may prevent lithium oxide deposition from aprotic electrolytes and lithium carbonate precipitation from alkaline electrolytes. The present communication reports a study on the effect of Li ions on the oxygen reduction reaction (ORR) in sulfuric acid electrolytes. It was found that the Li ions have negligible interactions with the active surface of Pt catalysts. However, significantly lower ORR activities were found when Li ions are present in the sulfuric acid. The intrinsic kinetic activities were found to decrease with the increase of Li ion concentrations, but level off when the Li ion concentrations are larger than 1.0 M. The low activities of Pt catalysts in Li ion containing electrolytes were attributed to a constraining effect of Li ions on the diffusion of oxygen in the electrolyte solution. (C) 2011 Elsevier B.V. All rights reserved.

Liu, H↗