Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

600 C Logic Gates Using Silicon Carbide JFET's

Complex electronics and sensors are increasingly being relied on to enhance the capabilities and efficiency of modernjet aircraft. Some of these electronics and sensors monitor and control vital engine components and aerosurfaces that operate at high temperatures above 300 C. However, since today's silicon-based electronics technology cannot function at such high temperatures, these electronics must reside in environmentally controlled areas. This necessitates either the use of long wire runs between sheltered electronics and hot-area sensors and controls, or the fuel cooling of electronics and sensors located in high-temperature areas. Both of these low-temperature-electronics approaches suffer from serious drawbacks in terms of increased weight, decreased fuel efficiency, and reduction of aircraft reliability. A family of high-temperature electronics and sensors that could function in hot areas would enable substantial aircraft performance gains. Especially since, in the future, some turbine-engine electronics may need to function at temperatures as high as 600 C. This paper reports the fabrication and demonstration of the first semiconductor digital logic gates ever to function at 600 C. Key obstacles blocking the realization of useful 600 C turbine engine integrated sensor and control electronics are outlined.

Neudeck, Philip G.↗

The separatrix electron density in JET, ASDEX upgrade and alcator C-Mod H-mode plasmas: A common evaluation procedure and correlation with engineering parameters

The separatrix electron density is an important parameter for core-edge scenario integration in tokamak devices, as it influences plasma confinement, divertor detachment and disruption avoidance. This quantity has been measured in H-mode discharges on JET, ASDEX Upgrade and Alcator C-Mod by applying the same fitting function to Thomson scattering measurements, and by employing the same analysis technique based on scrape-off layer power balance. To estimate the power crossing the separatrix, the inter-ELM time derivative of the plasma energy d W /d t has been experimentally evaluated and found to be approximately a constant fraction of the absorbed heating power. Correlations between n e,sep and engineering parameters have been investigated, revealing that n e,sep scales with the divertor neutral pressure p 0,div in a similar manner across all devices. Additionally, when n e,sep is normalized to the obtained n e,sep dependency, no clear correlation with the plasma current is found. These observations are in agreement with the 2-point model, which suggests that the upstream separatrix density is mainly set by the recycling at the divertor target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic Medical Record Integration for Streamlined DXA Reporting

Dual-energy X-ray absorptiometry (DXA) is the most frequently performed examination to assess bone mineral density in clinical practice. Aside from images and graphical displays, many numerical values are part of DXA reports. These values are typically manually entered into the formal report through the electronic medical record or PACS workstation. The process takes time and is prone to errors. Exporting the DXA numerical data via HL7 engine to the electronic medical record was proposed to improve reporting efficiency and accuracy. The output from the DXA unit computer was reconfigured to export the report content via the HL7 interface engine into the electronic medical record. Radiology interpretive reporting was subsequently done directly in the electronic medical record. In the evaluation of errors, 100 preliminary DXA reports before the change and 100 after the change were examined. These reports were analyzed for errors that included decimal change, number transposition, negative number issue, other incorrect number error, and failure to include prior exam for comparison. In addition, report turnaround times were evaluated before and after the changes were made. Reporting time evaluations included 1-year volume prior to change (3915 reports) and 1 month post-change (206 reports). Of 100 DEXA exams before the change, 15 final reports contained 25 numerical errors. After the change, no numerical errors in the reports were identified. Exam end to final report time decreased from 2159 to 625 min on average. Automating data transmittal from the DXA modality for report generation improves accuracy and turnaround time. This approach did not require any third party software, and healthcare information security concerns were negated since we are using our standard workstations. Secondary to the affordability and applicability to the large percentage of the population using electronic medical record systems, this type of automated workflow is recommended.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-E-T-112: An OpenCL-Based Cross-Platform Monte Carlo Dose Engine (oclMC) for Coupled Photon-Electron Transport

Purpose: Low computational efficiency of Monte Carlo (MC) dose calculation impedes its clinical applications. Although a number of MC dose packages have been developed over the past few years, enabling fast MC dose calculations, most of these packages were developed under NVidia’s CUDA environment. This limited their code portability to other platforms, hindering the introduction of GPU-based MC dose engines to clinical practice. To solve this problem, we developed a cross-platform fast MC dose engine named oclMC under OpenCL environment for external photon and electron radiotherapy. Methods: Coupled photon-electron simulation was implemented with standard analogue simulation scheme for photon transport and Class II condensed history scheme for electron transport. We tested the accuracy and efficiency of oclMC by comparing the doses calculated using oclMC and gDPM, a previously developed GPU-based MC code on NVidia GPU platform, for a 15MeV electron beam and a 6MV photon beam in a homogenous water phantom, a water-bone-lung-water slab phantom and a half-slab phantom. We also tested code portability of oclMC on different devices, including an NVidia GPU, two AMD GPUs and an Intel CPU. Results: Satisfactory agreements were observed in all photon and electron cases, with ∼0.48%–0.53% average dose differences at regions within 10% isodose line for electron beam cases and ∼0.15%–0.17% for photon beam cases. It took oclMC 3–4 sec to perform transport simulation for electron beam on NVidia Titan GPU and 35–51 sec for photon beam, both with ∼0.5% statistical uncertainty. The computation was 6%–17% slower than gDPM due to the differences in both physics model and development environment, which is considered not significant for clinical applications. In terms of code portability, gDPM only runs on NVidia GPUs, while oclMC successfully runs on all the tested devices. Conclusion: oclMC is an accurate and fast MC dose engine. Its high cross-platform portability makes it clinically attractive.

60 APPLIED LIFE SCIENCES↗

Proton Conduction in Exchange Membranes across Multiple Length Scales

Concerns over global climate change associated with fossil-fuel consumption continue to drive the development of electrochemical alternatives for energy technology. Proton exchange fuel cells are a particularly promising technology for stationary power generation, mobile electronics, and hybrid engines in automobiles. For these devices to work efficiently, direct electrical contacts between the anode and cathode must be avoided; hence, the separator material must be electronically insulating but highly proton conductive. As a result, researchers have examined a variety of polymer electrolyte materials for use as membranes in these systems. In the optimization of the membrane, researchers are seeking high proton conductivity, low electronic conduction, and mechanical stability with the inclusion of water in the polymer matrix. A considerable number of potential polymer backbone and side chain combinations have been synthesized to meet these requirements, and computational studies can assist in the challenge of designing the next generation of technologically relevant membranes. Such studies can also be integrated in a feedback loop with experiment to improve fuel cell performance. However, to accurately simulate the currently favored class of membranes, perfluorosulfonic acid containing moieties, several difficulties must be addressed including a proper treatment of the proton-hopping mechanism through the membrane and the formation of nanophase-separated water networks. We discuss our recent efforts to address these difficulties using methods that push the limits of computer simulation and expand on previous theoretical developments. We describe recent advances in the multistate empirical valence bond (MS-EVB) method that can probe proton diffusion at the nanometer-length scale and accurately model the so-called Grotthuss shuttling mechanism for proton diffusion in water. Using both classical molecular dynamics and coarse-grained descriptions that replace atomistic representations with collective coordinates, we investigated the proton conductivity of polymer membrane structure as a function of hydration level. Nanometer-sized water channels form torturous pathways that are traversed by the charges during fuel cell operation. Using a combination of coarse-grained membrane structure and novel multiscale methods, we demonstrate emerging approaches to treat proton motion at the mesoscale in these complex materials.

Jorn, Ryan↗

Regiospecific Incorporation of Acetylene Linker in High‐Electron Mobility Dimerized Acceptors for Organic Solar Cells with High Efficiency (18.8%) and Long 1‐Sun Lifetime (> 5000 h)

Abstract The commercialization of organic solar cells (OSCs) requires both high power conversion efficiency (PCE) and long‐term stability. However, the lifetime of the OSCs containing small‐molecule acceptors (SMA) should be significantly enhanced. In this study, a series of planarity‐controlled is developed, high electron mobility dimerized SMAs (DSMAs) and realize OSCs with high‐performance (PCE = 18.8%) and high‐stability ( t 80% lifetime = 5380 h under 1‐Sun illumination). An acetylene linker with a planar triple bond is designed for dimerization of SMA units to afford the high backbone planarity necessary to achieve high crystallinity and electron mobility. To further engineer the molecular conformation and electron mobility of the DSMAs, different regioisomers of a Y‐based SMA are dimerized to yield three regioisomerically distinct DSMAs, denoted as DYA‐I, DYA‐IO, and DYA‐O, respectively. It is found that the crystallinity, electron mobility, and glass transition temperature of the DSMAs gradually increase in the order of DYA‐O, DYA‐IO, and DYA‐I, which, in turn, enhance the PCE and device stability of the resulting OSCs; DYA‐O (PCE = 16.45% and t 80% lifetime = 3337 h) < DYA‐IO (PCE = 17.54% and t 80% lifetime = 4255 h) < DYA‐I (PCE = 18.83% and t 80% lifetime = 5380 h).

Chemistry↗

Doping of Cr in Graphene Using Electron Beam Manipulation for Functional Defect Engineering

Chromium atoms in graphene have been proposed to exhibit magnetic moments and spin-selective conducting states depending on the local bonding geometry within the graphene structure, which could lead to interesting applications in spintronics. Despite this interest, there are few direct experimental reports of Cr dopants in graphene even though it is theorized to be stable. Here, we demonstrate the introduction of single Cr dopant atoms into the graphene lattice and onto graphene edges through the controlled use of a focused electron beam in a scanning transmission electron microscope. Here, we show local control of doping locations, and when coupled with targeted in situ milling during scanning of the e-beam, these strategies demonstrate an important component of the fabrication of tailored nanostructured devices in the electron microscope. The approach is validated with first-principles calculations to understand synthesis pathways during fabrication and reveal the energetics and local properties of Cr atoms embedded in graphene; for example, Cr doping can convert graphene into a magnetic and semiconducting material, which suggests Cr-doped graphene can be used as a building block for potential electronic devices and a means to construct them.

36 MATERIALS SCIENCE↗

Native Defects Hybridization and Electronic Transport in Cu 2 Se–CuGaSe 2 Hierarchical Composites

Engineering the energy distribution of electronic defects in semiconductors can afford the coexistence of degenerate and nondegenerate transport behavior. By leveraging native defects in Cu 2 Se and CuGaSe 2 phases, the tunability of the concentration and energy distribution of active electronic defects in hierarchical (1-x)Cu 2 Se-(x)CuGaSe 2 composites is demonstrated. This study found that the electrical conductivity of various composites decreases with rising temperature indicating degenerate semiconducting behavior, whereas the carrier density increases with temperature, which is consistent with non-degenerate semiconductivity. Remarkably, this study found that while the carrier density and electrical conductivity drop with the increasing CuGaSe 2 content for samples with x ≤ 0.45 is consistent with an increase in the activation energy of “active” electronic defects, the sudden increase by 140% in the electrical conductivity and by 109% in the carrier density for near equimolar composition suggests the formation of a large density of electronic defects with lower activation energy. This unusual behavior is understood within the context of the hybridization of coexisting native electronic defects to form degenerate hybrid acceptor states with lower activation energy. The reported unique electronic transport can be leveraged for the development of more versatile electronic and optoelectronic devices with superior performance.

36 MATERIALS SCIENCE↗

Electron‐Deficient and Quinoid Central Unit Engineering for Unfused Ring‐Based A 1 –D–A 2 –D–A 1 ‐Type Acceptor Enables High Performance Nonfullerene Polymer Solar Cells with High V oc and PCE Simultaneously

Abstract Here, a pair of A 1 –D–A 2 –D–A 1 unfused ring core‐based nonfullerene small molecule acceptors (NF‐SMAs), BO2FIDT‐4Cl and BT2FIDT‐4Cl is synthesized, which possess the same terminals (A 1 ) and indacenodithiophene unit (D), coupling with different fluorinated electron‐deficient central unit (difluorobenzoxadiazole or difluorobenzothiadiazole) (A 2 ). BT2FIDT‐4Cl exhibits a slightly smaller optical bandgap of 1.56 eV, upshifted highest occupied molecular orbital energy levels, much higher electron mobility, and slightly enhanced molecular packing order in neat thin films than that of BO2FIDT‐4Cl . The polymer solar cells (PSCs) based on BT2FIDT‐4Cl:PM7 yield the best power conversion efficiency (PCE) of 12.5% with a V oc of 0.97 V, which is higher than that of BO2FIDT‐4Cl ‐based devices (PCE of 10.4%). The results demonstrate that the subtle modification of A 2 unit would result in lower trap‐assisted recombination, more favorable morphology features, and more balanced electron and hole mobility in the PM7:BT2FIDT‐4Cl blend films. It is worth mentioning that the PCE of 12.5% is the highest value in nonfused ring NF‐SMA‐based binary PSCs with high V oc over 0.90 V. These results suggest that appropriate modulation of the quinoid electron‐deficient central unit is an effective approach to construct highly efficient unfused ring NF‐SMAs to boost PCE and V oc simultaneously.

Zhang, Chao↗

Introduction to Digital Image Correlation (DIC) with annotated bibliography

Digital Image Correlation (DIC) is “a non-contact means of measuring motion and deformation using digital images of the object of interest”, capable of full-field measurements over large areas. Getting started in DIC can be difficult, since there are many different techniques, and the body of literature on DIC is extensive. IEEE Xplore alone lists nearly 11,000 references, including magazines, conference proceedings, journal articles, books, etc. A Google search returns around 145 million results. The intent of this annotated bibliography is to provide an entry point for beginners and to collect references that may be useful to more advanced practitioners.

42 ENGINEERING↗

Uncovering anisotropic effects of electric high-moment dipoles on the tunneling current in $$\delta$$-layer tunnel junctions

Abstract The precise positioning of dopants in semiconductors using scanning tunneling microscopes has led to the development of planar dopant-based devices, also known as $$\delta$$ δ layer-based devices, facilitating the exploration of new concepts in classical and quantum computing. Recently, it has been shown that two distinct conductivity regimes (low- and high-bias regimes) exist in $$\delta$$ δ -layer tunnel junctions due to the presence of quasi-discrete and continuous states in the conduction band of $$\delta$$ δ -layer systems. Furthermore, discrete charged impurities in the tunnel junction region significantly influence the tunneling rates in $$\delta$$ δ -layer tunnel junctions. Here we demonstrate that electrical dipoles, i.e. zero-charge defects, present in the tunnel junction region can also significantly alter the tunneling rate, depending, however, on the specific conductivity regime, and orientation and moment of the dipole. In the low-bias regime, with high-resistance tunneling mode, dipoles of nearly all orientations and moments can alter the current, indicating the extreme sensitivity of the tunneling current to the slightest imperfection in the tunnel gap. In the high-bias regime, with low-resistivity, only dipoles with high moments and oriented in the directions perpendicular to the electron tunneling direction can significantly affect the current, thus making this conductivity regime significantly less prone to the influence of dipole defects with low-moments or oriented in the direction parallel to the tunneling.

42 ENGINEERING↗

Finding the order in complexity: The electronic structure of 14-1-11 zintl compounds

Yb 14 MnSb 11 and Yb 14 MgSb 11 have rapidly risen to prominence as high-performing p-type thermoelectric materials. However, the fairly complex crystal structure of A 14 MX 11 Zintl compounds renders the interpretation of the electronic band structure obscure, making it difficult to chemically guide band engineering and optimization efforts. In this work, we delineate the valence-balanced Zintl chemistry of A 14 MX 11 compounds using the molecular orbital theory. By analyzing the electronic band structures of Yb 14 MgSb 11 and Yb 14 AlSb 11 , we show that the conduction band minimum is composed of either an antibonding molecular orbital originating from the (Sb 3 ) 7– trimer or a mix of atomic orbitals of A, M, and X. The singly degenerate valence band is comprised of non-bonding Sb pz orbitals primarily from the Sb atoms in the (MSb 4 ) m– tetrahedra and of isolated Sb atoms distributed throughout the unit cell. Such a chemical understanding of the electronic structure enables strategies to engineer electronic properties (e.g., the bandgap) of A 14 MX 11 compounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band-Gap Engineering of Carbon Nanotubes with Grain Boundaries

Structure and electronic properties of carbon nanotubes (CNTs) with grain boundaries (GBs) are investigated using density-functional calculations, where the GBs parallel and perpendicular to the tube axis are considered. Simulation results show that the GBs have a great effect on the electronic properties of the CNTs. For the GBs along the tube axis, the CNTs are narrow or zero band gap (<0.16 eV) materials, independent of the misorientation angle and diameter. For the GBs perpendicular to the tube axis, localized electronic states appear within the GBs regions, leading to a larger band gap of up to 0.6 eV. It is convenient to transport and localize the electrons and holes by engineering the GBs. These findings are of great significance for developing carbon-based nanomaterials and electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗