Search NASA⌕ Search

SEARCH · Search NASA

Results for “ether”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Fluorine-Free Superhydrophobic Coatings: Rapid Fabrication and Highly Efficient Oil/Water Separation

In this work, a rapid method is demonstrated to obtain a fluorine-free superhydrophobic/superoleophilic coating by a simple two-step method: dip-coating and oven curing. The chemical structure of the coating is based on the crosslinking reaction of an alkyl methacrylate, a dimethacrylate (crosslinker) and a silane (adhesive), using AIBN as initiator, toluene as solvent, and silica nanoparticles to enhance surface roughness. Chemorheology results show that the coating is fully cured even in 20 min at 100 °C, exhibiting a water contact angle (CA) of 162 ± 2°, sliding angle (SA) of 4 ± 1°, nanometrical structures throughout the surface, and excellent adhesion properties for the mesh screen. The coating exhibits outstanding oil/water separation efficiency (96–99%) for seven different types of oil (gasoline, diesel, petroleum ether, hexane, toluene, chloroform, and dichloromethane), and in addition presents high recyclability. Based on nonisothermal TGA, the activation energy of degradation, calculated using the Kissinger and Ozawa models, is 113.5 and 114 kJ mol -1 , respectively. Finally, the coating is thermally aged at 150 °C: the CA exhibits a smooth decrease up to 129 ± 1° at 120 min, and FTIR analysis shows structural changes possibly related to the generation of thermal oxidation products.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evaluating the impact of functional groups on membrane‐mediated CO 2 / N 2 gas separations using a common polymer backbone

Abstract Polymeric membranes have shown tremendous promise for the separation of CO 2 from flue gas streams. However, few systematic studies have been conducted to better understand the impact that chemical functionalities have on membrane‐based gas separation performance. To address this gap, we herein describe the synthesis and gas separation performance of a series of vinyl‐addition polynorbornenes bearing various CO 2 ‐philic functional groups. To facilitate direct comparison between functional groups, each material was designed to maintain a common polymer backbone. Though the incorporation of CO 2 ‐philic moieties within a dense polymeric membrane is frequently hypothesized to enhance CO 2 solubility, and thereby increase CO 2 /N 2 selectivity, our results demonstrate that the incorporation of CO 2 ‐philic groups onto a common polymer backbone do not necessarily result in increased gas separation performance. Experimental and computational results demonstrate that the incorporation of amidoxime groups onto a polynorbornene backbone increase CO 2 /N 2 selectivity, whereas commonly employed ethereal side chains only increased permeability.

Higgins, Morgan A.↗
DOE OSTI2023

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. Finally, the versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spatial Effect on the Performance of Carboxylate Anode Materials in Na-Ion Batteries

Developing low-voltage carboxylate anode materials is critical for achieving low-cost, high-performance, and sustainable Na-ion batteries (NIBs). However, the structure design rationale and structure-performance correlation for organic carboxylates in NIBs remains elusive. Herein, the spatial effect on the performance of carboxylate anode materials is studied by introducing heteroatoms in the conjugation structure and manipulating the positions of carboxylate groups in the aromatic rings. Planar and twisted organic carboxylates are designed and synthesized to gain insight into the impact of geometric structures to the electrochemical performance of carboxylate anodes in NIBs. Among the carboxylates, disodium 2,2’-bipyridine-5,5’-dicarboxylate (2255-Na) with a planar structure outperforms the others in terms of highest specific capacity (210 mAh g -1 ), longest cycle life (2000 cycles), and best rate capability (up to 5 A g -1 ). Further, the cyclic stability and redox mechanism of 2255-Na in NIBs are exploited by various characterization techniques. Moreover, high-temperature (up to 100 °C) and all-organic batteries based on a 2255-Na anode, a polyaniline (PANI) cathode, and an ether-based electrolyte are achieved and exhibited exceptional electrochemical performance. Therefore, this work demonstrates that designing organic carboxylates with extended planar conjugation structures is an effective strategy to achieve high-performance and sustainable NIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Delineating the Impact of Diluent on High-Concentration Electrolytes for Developing High-Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathode

LiNi 0.5 Mn 1.5 O 4 (LNMO) is a high-voltage spinel cathode with low nickel content, making it an attractive candidate for next-generation lithium-ion batteries (LIBs). However, its application is limited by interfacial instability with conventional carbonate-based electrolytes at high voltages. In this work, a localized saturated electrolyte (LSE) capable of stably operating up to 4.85 V is investigated. Molecular dynamics simulations and Fourier transform infrared spectroscopy reveal that adding “non-solvating” 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether diluent in the saturated electrolyte, more PF 6 − anions are present in the first solvation shell of Li + , at the expense of solvent molecules. This tailored solvation environment promotes the formation of a robust, LiF-rich cathode-electrolyte interphase that mitigates transition metal dissolution and parasitic side reactions. The optimized LSE enables excellent cycling performance, with 95% capacity retention in Li|LNMO half-cells after 100 cycles and 94% retention in Li 4 Ti 5 O 12 |LNMO full cells after 250 cycles, even at a practically relevant LNMO cathode loading of ≈15 mg cm −2 . In conclusion, these results highlight the benefits of electrolyte engineering and solvation structure control in advancing high-voltage LIB technologies.

LNMO cathode↗
DOE OSTI2021

Predicting Low Toxicity and Scalable Solvent Systems for High–Speed Roll–to–Roll Perovskite Manufacturing

Printed lead-based perovskite photovoltaics (PV) have gained interest due to their potential to be manufactured with scalable roll-to-roll techniques. In industrial scale-up, toxicity of inks can constrain roll-to-roll manufacturing due to the added cost of managing toxic effluents. Due to solvent toxicity, few perovskite solution chemistries in published works are scalable to gigawatt production capacity at low cost. Herein, it is shown that for scalable PV production, the use of aprotic polar solvents should be avoided due to their overall toxicity. Compliance with worldwide worker safety regulations for solvent exposure limits could require additional air handling requirements for some solvents, which in turn would affect cost-effectiveness. It is shown that costs associated with handling of hazardous substances can be significant and estimate an added cost of ¢3.7/W for dimethylformamide (DMF)-based inks. To solve this problem, a new perovskite ink solvent system is developed that is composed entirely of ether and alcohol, which has an effective exposure limit 14× higher than DMF, making it suitable for industrial coating processes. Here, it is shown that the new ink solvent system is capable of fabricating high-efficiency perovskite solar cells processed in 1 min on a standard roll-to-roll system.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbodiimide‐Induced Formation of Transient Polyether Cages**

Abstract The use of “fuel” compounds to drive chemical systems out of equilibrium is currently of interest because of the potential for temporally controlled, responsive behavior. We have recently shown that transiently formed crown ethers exhibit counterintuitive templation effects when generated in the presence of alkali metal cations: “matched” cations, such as K + with an 18‐crown‐6 analogue, suppress the formation of the macrocycles (negative templation). In this work, we describe two macrocyclic diacids that, on treatment with carbodiimides, give transient macrobicyclic cages analogous to polyether cages. Negative templation effects are observed for the smaller cage when generated in the presence of K + and Na + , but there is a weak, but reproducible, positive templation effect in the presence of Li + . The larger cage behaves similarly in the presence of Li + , K + , Rb + , and Cs + , but differently with Na + , which appears to bind to both the cage and the initial macrocycle.

Hossain, Mohammad Mosharraf↗
DOE OSTI2020

Calcium Phosphate Catalysts for Ethanol Coupling to Butanol and Butadiene

The catalytic conversion of ethanol to butanol and butadiene at 633 K and atmospheric pressure (7 vol% ethanol) was studied over calcium phosphate materials pretreated over a wide temperature range. For calcium phosphate pretreated at or below 923 K, the resulting solid had an apatite structure identified by X-ray diffraction and strong acid sites probed by triethylamine (TEA) adsorption microcalorimetry. The low temperature pretreated materials were not effective at ethanol coupling reactions but instead were highly selective to acid-catalyzed products ethene and diethyl ether. Pretreatment of calcium phosphate at 973 K transformed the apatite structure to β-tricalcium phosphate, which exposed both acid and base sites evaluated by TEA and CO 2 adsorption microcalorimetry. In conclusion, high temperature pretreated calcium phosphate catalysts formed the coupling products butanol and butadiene during ethanol reaction. The butadiene selectivity was improved by supporting calcium phosphate on zirconia.

09 BIOMASS FUELS↗
DOE OSTI2020

Transactinide studies with sulfur macrocyclic extractant using mercury

Mercury extraction has been studied in nitric and hydrochloric acids with hexathia-18-crown-6 dissolved in carbon tetrachloride. Batch study experiments have been performed to determine the best conditions for maximum extraction. In both acids, Hg(II) was best extracted at low molarity while almost no extraction was observed above 2 M. Furthermore, speciation studies were carried out in an attempt to describe the extraction mechanism, but the exact composition of the extracted species was not determined. The extraction kinetics were studied to assess the feasibility of this crown ether for extracting Cn and/or Fl in a future online experiment.

197mHg↗
DOE OSTI2020

A novel battery scheme: Coupling nanostructured phosphorus anodes with lithium sulfide cathodes

Lithium-ion batteries are approaching their theoretical limit and can no longer keep up with the increasing demands of human society. Lithium-sulfur batteries, with a high theoretical specific energy, are promising candidates for next generation energy storage. However, the use of Li metal in Li-S batteries compromises both safety and performance, enabling dendrite formation and causing fast capacity degradation. Previous studies have probed alternative battery systems to replace the metallic Li in Li-S system, such as a Si/Li2S couple, with limited success in performance. Recently, there is a focus on red P as a favorable anode material to host Li. In this work, we establish a novel battery scheme by utilizing a P/C nanocomposite anode and pairing it with a Li 2 S coated carbon nanofiber cathode. We find that red P anode can be compatible in ether-based electrolyte systems and can be successfully coupled to a Li 2 S cathode. Our proof of concept full-cell displays remarkable specific capacity, rate and cycling performances. We expect our work will provide a useful alternative system and valuable insight in the quest for next generation energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2023

Molecular Dynamics Simulation of Hygroscopic Aging Effects in Epoxy Polymer

The automobile industry is incorporating more lightweight content in car designs to boost fuel-economy. New structural adhesives are needed to mitigate the corrosion and thermal expansion issues associated with joining dissimilar lightweight materials, but adhesive developers lack a fundamental understanding of the chemistry that occurs in the adhesive as the joint ages. In this study, we developed structural adhesive molecular models and applied classical molecular dynamics simulations and density functional theory calculations to gain molecular insights into the influence of water molecules on the properties of epoxy-based adhesives (DGEBA + Jeffamine (JD230)). The simulations were complemented by experimental synthesis and characterization. Our work underscores the impact of water molecules on the local structure of the epoxy network as well as resulting mechanical properties. Water molecules were mainly coordinated with hydroxyls, primary amines and secondary amines, but also weakly coordinated with ether linkages, which were found most probable to be labile. Simulated stress–strain data indicates that increasing the water content deteriorates the mechanical properties. The Young’s modulus decreased by ~ 30% when the water content increased to 3 wt%. We conclude, this integration of molecular-level chemical insights with mechanical property simulations of the hydrated epoxy system and experimental validation holds the promise to advance lightweight joint technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Benchmarking Cu/BEA and HBEA catalysts for high-octane gasoline synthesis

We distinguish rates at which carbon deposition occurs during initiation, rates at which catalytic centers are lost during deactivation, and paraffin-to-olefin ratio during propagation as benchmarks that distinguish 5 wt% Cu/H-BEA and H-BEA (Si/Al = 13.5) catalysts during dimethyl ether (DME) homologation in the presence of hydrogen. Studies that systematically vary initial DME contact time (210, 94, and 45 mol H+, initial s (mol C ) -1 ), DME pressure (4 and 22 kPa), and H 2 pressure (1, 24, and 48 kPa) reveal that Cu enables lower carbon deposition rates (on a per proton basis) in the induction period, increases the effluent paraffin-to-olefin ratio during propagation, and decreases the instantaneous site-loss yields by a factor of ~ 1.5-2x (moles of active sites lost per mole of DME) during termination sequences thus affecting the degree of product saturation and catalyst stability during DME homologation. Furthermore, these results provide mechanistic insights revealing the critical role of Cu in facilitating DME homologation to high value, high-octane gasoline-range hydrocarbons with higher cumulative turnovers than proton form H-BEA.

09 BIOMASS FUELS↗
DOE OSTI2026

Powders and pellets – Extrusion engineering for a Cu/BEA syngas-to-hydrocarbons catalyst

Converting high-performing powder catalysts from the laboratory reactor scale into effective extruded catalysts at the industrial scale remains a hurdle for advancing sustainable catalytic processes, such as the conversion of biogenic syngas into high octane gasoline. Recently, a process-intensified syngas-to-hydrocarbons (STH) reaction in a single reactor under relatively mild conditions (220–250 ºC, 0.75–2.0 MPa) was reported, enabled by the development of a dimethyl ether (DME) homologation catalyst, Cu-modified H-BEA (Cu/BEA) zeolite. In this study, we explore approaches for synthesizing engineered Cu/BEA catalysts for use in the STH reaction to retain the high performance observed with the powder catalyst. We demonstrate that changes to the order of manufacturing steps (i.e., Cu deposition, alumina binder addition, and extrusion) result in observable changes to key active sites (Brønsted acid sites and zeolitic Cu + species), and ultimately, catalyst performance. When the Cu precursor was added directly to BEA before extrusion, both types of active sites were stabilized, preserving the activity of the powder catalyst. However, when the Cu precursor was added after extrusion, the resulting Cu species were mobile, destabilizing Brønsted acid sites and leading to near-zero activity.

09 BIOMASS FUELS↗
DOE OSTI2026

Migration of Al within dealuminated beta extruded catalysts influences olefin distribution during ethanol upgrading

Zeolites serve as essential catalytic platforms for many industrial processes, including emerging ethanol-to-olefins (ETO) upgrading technologies. Although metal-loaded (Cu, Zn, Y) dealuminated beta (deAlBeta) zeolite powders are promising catalysts for direct ETO conversion with high selectivity to butene-rich C3+ olefins necessary for production of sustainable aviation fuels (SAF), development of these materials as shaped technical bodies through the incorporation of binders is required for scale-up and commercial viability. Here, we report the ethanol upgrading performance of Cu-Zn-Y/deAlBeta extruded catalysts formulated with either alumina or kaolin clay binders. Both extrudates exhibit high ethanol dehydration reactivity which competes with the initial ethanol dehydrogenation step in the direct ETO reaction network. Consequently, elevated selectivity to dehydration side products (ethylene, diethyl ether) at ∼100% ethanol conversion is observed on Cu-Zn-Y/deAlBeta extrudates compared to the powder catalyst, which inhibits production of desired C3+ olefins. Utilizing microscopy and spectroscopic characterizations, we attribute this to Al migration from binder to zeolite particles within the extrudates, thus re-aluminating the zeolite and generating Brønsted acid sites active for dehydration reactions. This work elucidates the effects of binder incorporation on ETO product distributions and emphasizes that binder selection must be carefully considered during design of extruded zeolite catalysts.

Jacobs, Hunter [ORNL] (ORCID:000000016190874X)↗
DOE OSTI2022

Competitive effects of glucan’s main hydrolysates on biochar formation: A combined experiment and density functional theory analysis

We report the complexity of polysaccharide hydrothermal products increases the difficulty of exploring the formation of biochar, limiting the development of biochar. This work clarifies the completive effects of glucan’s main hydrolysates on biochar formation from three aspects: experimental, thermodynamic, and kinetic. The products distribution illustrates that 5-HMF, FA, and LA are mainly involved in the formation of biochar. Biochar mainly includes furan ring, ether group, and ester group by the analysis of magic-angle-spinning nuclear magnetic resonance, X-ray photoelectron spectroscopy, and elemental analysis. Combined experiments and density functional theory analysis, the etherification reaction of 5-HMF itself is most likely to occur and is key to form biochar, followed by the esterification of FA with 5-HMF, and then the etherification of 5-HMF and LA. The further verified experiments also manifest these results. This work will develop a foundation for exploring the complex formation mechanism of cellulose-based biochar.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The pectin puzzle: Decoding the fine structure of rhamnogalacturonan-I (RG-I) in Arabidopsis thaliana uncovers new pectin features

Pectin is generally divided into four distinct structural categories, namely homogalacturonan, xylogalacturonan, rhamnogalacturonan I (RG-I) and rhamnogalacturonan II. While much of the structural diversity of homogalacturonan, xylogalacturonan and rhamnogalacturonan II has been elucidated, the structural features of RG-I are less well understood. In this work, we employed multiple complementary analytical techniques to present a detailed structural analysis of RG-I in the model species Arabidopsis thaliana . Starting with highly purified RG-I from different Arabidopsis tissues, we employed comparative linkage and nuclear magnetic resonance analysis along with mass spectrometry analysis of enzymatically digested RG-I oligosaccharides. Besides the presence of the canonical α-1,5-arabinan, β-1,4-galactan, β-1,6-galactan and arabinogalactan RG-I side chains of varying lengths, we show that a large portion of the β-1,6-galactan is terminated by either 4-O-methyl β-glucuronic acid (GlcA) residues or, to a smaller degree, β-GlcA that lacks the Me-ether group. Importantly, O-acetylation of RG-I GalA residues is a minor modification while 10 % of the backbone Rha residues are 3-O-acetylated, and most of the acetylated Rha is additionally branched with β-galactose substituents. Taken together, the combined results of these different analytical techniques present the most comprehensive structural overview of Arabidopsis thaliana RG-I to date.

25 ENERGY STORAGE↗
DOE OSTI2020

Bis–Calix[4]pyrroles: Preparation, structure, complexation properties and beyond

Calix[4]pyrrole and its derivatives are key members of the supramolecular Parthenon along with other well-recognized receptor systems, such as crown ethers, cyclodextrins (CDs), cucurbiturils, calixarenes and pillararenes. Calix[4]pyrroles are relatively easy–to–make and widely recognized for their ability to bind anions and ion pairs. Many review papers relating to aspects of calix[4]pyrrole chemistry have been published within the past decades. These reviews have focused primarily on monomeric calix[4]pyrroles. The emergent area of Bis–calix[4]pyrroles, species wherein two calix[4]pyrrole subunits are linked by one or more “walls”, has not benefited from such treatment, even though the species in question often exhibit enhanced binding affinities and selectivities relative to their single calix[4[pyrrole congeners. This review is designed to summarize recent progress involving bis–calix[4]pyrroles. Advances in the design, synthesis, and coordination chemistry of bis–calix[4]pyrroles containing “one wall”, “two walls”, “three walls”, and “four walls”, as well as their possible application in ion recognition, sensing and logic gate construction, will be detailed. Lastly, the hope is that this review will provide a guide for the design and preparation of new multi-component calix[4]pyrrole receptors possessing improved recognition properties, thereby advancing host–guest chemistry in new and useful directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗