Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Studying the earth's poles from satellites

The use of satellite remote sensing is reviewed with respect to the investigation of polar regions and global meteorological processes. Data collected from previous and ongoing satellite missions sponsored by NASA and NOAA are discussed in terms of their ability to describe surface characteristics. Data relating to ocean/atmosphere heat transfer are obtained from microwave radiometers and synthetic aperture radars to give estimates of surface temperatures. Ocean color at several frequencies can be measured to estimate chlorophyll content, and optical and infrared sensors aid in the detection of short- and long-term variance in solar irradiance and earth radiation flux. The geophysical variables collected from satellite data at high latitudes can be used to understand the global climate, atmospheric warming, and other significant mechanisms.

Thomas, Robert H.↗

PULSAR TIMING ERRORS FROM ASYNCHRONOUS MULTI-FREQUENCY SAMPLING OF DISPERSION MEASURE VARIATIONS

Free electrons in the interstellar medium cause frequency-dependent delays in pulse arrival times due to both scattering and dispersion. Multi-frequency measurements are used to estimate and remove dispersion delays. In this paper, we focus on the effect of any non-simultaneity of multi-frequency observations on dispersive delay estimation and removal. Interstellar density variations combined with changes in the line of sight from pulsar and observer motions cause dispersion measure (DM) variations with an approximately power-law power spectrum, augmented in some cases by linear trends. We simulate time series, estimate the magnitude and statistical properties of timing errors that result from non-simultaneous observations, and derive prescriptions for data acquisition that are needed in order to achieve a specified timing precision. For nearby, highly stable pulsars, measurements need to be simultaneous to within about one day in order for the timing error from asynchronous DM correction to be less than about 10 ns. We discuss how timing precision improves when increasing the number of dual-frequency observations used in DM estimation for a given epoch. For a Kolmogorov wavenumber spectrum, we find about a factor of two improvement in precision timing when increasing from two to three observations but diminishing returns thereafter.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of the Hartmann–Tran profile to precise experimental data sets of 12 C 2 H 2

Self- and nitrogen-broadened line shape data for the P e (11) line of the ν₁ + ν₃ band of acetylene, recorded using a frequency comb-stabilized laser spectrometer, have been analyzed using the Hartmann–Tran profile (HTP) line shape model in a multispectrum fitting. In total, the data included measurements recorded at temperatures between 125 K and 296 K and at pressures between 4 and 760 Torr. New, sub-Doppler, frequency comb-referenced measurements of the positions of multiple underlying hot band lines have also been made. These underlying lines significantly affect the P e (11) line profile at temperatures above 240 K and poorly known frequencies previously introduced errors into the line shape analyses. Thus, the behavior of the HTP model was compared to the quadratic speed dependent Voigt profile (QSDVP) expressed in the frequency and time domains. A parameter uncertainty analysis was carried out using a Monte Carlo method based on the estimated pressure, transmittance and frequency measurement errors. From the analyses, the P e (11) line strength was estimated to be 1.2014(50) × 10 -20 in cm.molecules⁻¹ units at 296 K with the standard deviation in parenthesis. For analyzing these data, we found that a reduced form of the HTP, equivalent to the QSDVP, was most appropriate because the additional parameters included in the full HTP were not well determined. As a supplement to this work, expressions for analytic derivatives and a lineshape fitting code written in Matlab for the HTP are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal Inequalities to Bound a Performance Probability

A challenging problem encountered in engineering applications is the estimation of a probability-of-failure based on incomplete knowledge of the sources of uncertainty and/or limited sampling. Theories formulated to derive upper probability bounds offer an attractive alternative because first, they avoid postulating the probability laws that are often unknown and second, they substitute numerical optimization for statistical sampling. A critical assessment of one such technique is presented. It derives upper probability bounds from the McDiarmid concentration-of-measure theory, which postulates that fluctuations of a function are more-or-less concentrated about its mean value. Three applications of this theory are presented. The first two applications analyze “toy” polynomial functions defined in two and seventeen dimensions. The upper bounds of probability are calculated and compared to sampling-based estimates of the true-but-unknown probabilities. For these functions, the upper bounds obtained are too broad to be useful. These results are confirmed by conducting a similar analysis on a real engineering system, where upper bounds of probability associated with resonant frequencies of a structural system are estimated. These frequencies are predicted by a high-fidelity finite element model that was previously validated using vibration measurements. In this third application, the uncertainty is introduced by way of material properties and the effective preload of a beam-to-column connection, modeled explicitly. These applications suggest that the theory not only leads to upper bounds that are inefficient but that can also be sub-optimal if their numerical estimation is based on too few model runs. It is concluded that this particular theory, while mathematically attractive, may not be well suited for engineering applications.

Engineering(42)↗

Optimal Estimation of Rain Rate Profiles from Single-Frequency Radar Echoes

The significant ambiguities inherent in the determination of a particular vertical rain intensity profile from a given time profile of radar echo powers measured by a downward-looking (spaceborne or airborne) radar at a single attenuating frequency are well-documented. Indeed, one already knows that by appropriately varying the parameters of the reflectivity-rain-rate (Z - R) and/or attenuation-rain-rate (k - R) relationships, one can produce several substantially different hypothetical rain rate profiles which would have the same radar power profile. Imposing the additional constraint that the path-averaged rain-rate be a given fixed number does reduce the ambiguities but falls far short of eliminating them. While we now know how to generate as many mutually ambiguous rain-rate profiles from a given profile of received radar reflectivities as we like, there remains to produce a quantitative measure to assess how likely each of these profiles is, what the appropriate 'average' profile should be, and what the 'variance' of these multiple solutions is. Of course, in order to do this, one needs to spell out the stochastic constraints that can allow us to make sense of the words 'average' and 'variance' in a mathematically rigorous way. Such a quantitative approach would be particularly well-suited for such systems as the proposed Precipitation Radar of the Tropical Rainfall Measuring Mission (TRMM). Indeed, one would then be able to use the radar reflectivities measured by the TRMM radar from one particular look in order to estimate the most likely rain-rate profile that would have produced the measurements, as well as the uncertainty in the estimated rain-rates as a function of range. Such an optimal approach is described in this paper.

deep space flight computer real-time advanced spac↗

Distributed parameter modeling of the structural dynamics of the Solar Array Flight Experiment

A distributed-parameter model of the structural dynamics of the space-shuttle-deployed Solar Array Flight Experiment is developed and used to produce estimates of the modal frequencies and mode shapes. A lumped parameter version of the distributed model is used to estimate model characteristics by analyzing the measured responses of 32 targets. To make the modeling more tenable, a distributed parameter system is used to reduce the number of unknown parameters, a modified Newton-Raphson technique is used for rapid convergence, and a parallel processing supercomputer is used for more efficient computation. The performances of computers with a high-speed serial processor and with a high-speed parallel processor are compared. The best results are obtained with the modeling approach in which maximum likelihood estimation is applied to distributed parameter models.

Taylor, L. W., Jr.↗

High-Fidelity Flight Dynamic Analysis of Transonic Truss-Braced Wing

This paper presents a high-fidelity flight dynamic analysis of the Mach 0.8 Transonic Truss-Braced Wing (TTBW). Unsteady RANS CFD simulations of the Mach 0.8 TTBW in pitch, plunge, roll, and yaw oscillations are conducted in FUN3D. The time-domain data are transformed into the frequency-domain data by Fourier series. Transfer functions of the dynamic stability derivatives are then estimated by a frequency-domain re- gression. The dynamic stability derivatives with respect to the angle of attack are determined by the regression of the unsteady aerodynamic coefficients for the plunge motion. The dynamic stability derivatives with re- spect to the pitch rate are determined by the regression of the differential unsteady aerodynamic coefficients for the pitch motion upon the removal of the angle of attack contribution by the plunge motion. Similarly, dynamic stability derivatives with respect to the angle of sideslip, roll rate, and yaw rates are determined from the frequency domain regression. The longitudinal and lateral-direction flight dynamic models of the Mach 0.8 TTBW are constructed from these dynamic stability derivatives. The eigenvalues of the aircraft modes are analyzed to determine the vehicle stability.

Aircraft Stability and Control↗

CHARACTERISTICS OF PLANETARY CANDIDATES OBSERVED BY KEPLER. II. ANALYSIS OF THE FIRST FOUR MONTHS OF DATA

On 2011 February 1 the Kepler mission released data for 156,453 stars observed from the beginning of the science observations on 2009 May 2 through September 16. There are 1235 planetary candidates with transit-like signatures detected in this period. These are associated with 997 host stars. Distributions of the characteristics of the planetary candidates are separated into five class sizes: 68 candidates of approximately Earth-size (R{sub p} < 1.25 R{sub +}), 288 super-Earth-size (1.25 R{sub +} {<=} R{sub p} < 2 R{sub +}), 662 Neptune-size (2 R{sub +} {<=} R{sub p} < 6 R{sub +}), 165 Jupiter-size (6 R{sub +} {<=} R{sub p} < 15 R{sub +}), and 19 up to twice the size of Jupiter (15 R{sub +} {<=} R{sub p} < 22 R{sub +}). In the temperature range appropriate for the habitable zone, 54 candidates are found with sizes ranging from Earth-size to larger than that of Jupiter. Six are less than twice the size of the Earth. Over 74% of the planetary candidates are smaller than Neptune. The observed number versus size distribution of planetary candidates increases to a peak at two to three times the Earth-size and then declines inversely proportional to the area of the candidate. Our current best estimates of the intrinsic frequencies of planetary candidates, after correcting for geometric and sensitivity biases, are 5% for Earth-size candidates, 8% for super-Earth-size candidates, 18% for Neptune-size candidates, 2% for Jupiter-size candidates, and 0.1% for very large candidates; a total of 0.34 candidates per star. Multi-candidate, transiting systems are frequent; 17% of the host stars have multi-candidate systems, and 34% of all the candidates are part of multi-candidate systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Tailored Excitation for Frequency Response Measurement Applied to the X-43A Flight Vehicle

An important aspect of any flight research project is assessing aircraft stability and flight control performance. In some programs this assessment is accomplished through the estimation of the in-flight vehicle frequency response. This estimation has traditionally been a lengthy task requiring separate swept sine inputs for each control axis at a constant flight condition. Hypersonic vehicles spend little time at any specific flight condition while they are decelerating. Accordingly, it is difficult to use traditional methods to calculate the vehicle frequency response and stability margins for this class of vehicle. A technique has been previously developed to significantly reduce the duration of the excitation input by tailoring the input to excite only the frequency range of interest. Reductions in test time were achieved by simultaneously applying tailored excitation signals to multiple control loops, allowing a quick estimate of the frequency response of a particular aircraft. This report discusses the flight results obtained from applying a tailored excitation input to the X-43A longitudinal and lateral-directional control loops during the second and third flights. The frequency responses and stability margins obtained from flight data are compared with preflight predictions.

Baumann, Ethan↗

The MOM tunneling diode - Theoretical estimate of its performance at microwave and infrared frequencies

A theoretical analysis of the metal-oxide-metal (MOM) antenna/diode as a detector of microwave and infrared radiation is presented with the experimental verification conducted in the far infrared. It is shown that the detectivity at room temperature can be as high as 10 to the 10th per W Hz exp 1/2 at frequencies of 10 to the 14th Hz in the infrared. As a result, design guidelines are obtained for the lithographic fabrication of thin-film MOM structures that are to operate in the 10-micron region of the infrared spectrum.

Sanchez, A.↗

Optimal Estimation of Rain Rate Profiles from Single-Frequency Radar Echoes

It is well-documented (Hitschfeld and Bordan 1954, Meneghini 1978, Haddad et al 1993) that there are significant ambiguites inherent in the determination of a particular vertical rain intensity profile from a given time profile of radar echo powers measured by a downward-looking (spaceborne or airborne) radar at a single attenuating frequency.

stochastic constraints Ku-band Precipitation Radar↗

Estimating Alpine Snow Depth by Combining Multi-Frequency Passive Radiance Observations with Ensemble Snowpack Modeling

This paper presents a physically-based snow depth retrieval algorithm adapted for deep mountainous snowpack and airborne multifrequency (10.7, 18.7, 37.0 and 89.0 GHz) passive microwave (PM) radiance observations from a single flight. The algorithm employs a single forecast-analysis cycle of a traditional sequential assimilation scheme. It uses an ensemble of multi-layer snowpack model runs to resolve snow microstructure and melt-refreeze crusts, andmicrowave radiative transfer models to relate snow properties to microwave measurements.Snow depth was retrieved at a 120 m spatial resolution over three 1 km2 Intensive Study Area (ISA) within the Rabbit Ears Meso-Cell Study Area (MSA) from the NASA Cold Land Processes Experiment (CLPX) in Colorado (United States) for one date in February 2003. When evaluated against in situ observations, root mean square error (RMSE) of the snow depth from the assimilation was 13.3 cm for areas with low (<5 %) forest cover, which was a reduction of 48 % in the RMSE compared with the modeled snow depth when the PM observations were not assimilated; indicating a ~5% relative error of the posterior snow depth with respect to the average snow depth (200 cm) measured at these pixels. For pixels with forest cover ranging from 5-15% and 15-30%, results were improved (R2 increased from 0.65 to 0.71 and from 0 to 0.38, respectively) by introducing a forest radiative transfer model during the assimilation.

Airborne Multifrequency↗

Adaptive PV Frequency Control Strategy Based on Real-time Inertia Estimation

The declining cost of solar Photovoltaics (PV) generation is driving its worldwide deployment. As conventional generation with large rotating masses is being replaced by renewable energy such as PV, the power system’s inertia will be affected. As a result, the system’s frequency may vary more dramatically in the case of a disturbance, and the frequency nadir may be low enough to trigger protection relays such as under-frequency load shedding. The existing frequency-watt function mandated in power inverters cannot provide grid frequency support in a loss-of-generation event, as PV plants usually do not have power reserves. Here, a novel adaptive PV frequency control strategy is proposed to reserve the minimum power required for grid frequency support. A machine learning model is trained to predict system frequency response under varying system conditions, and an adaptive allocation of PV headroom reserves is made based on the machine learning model as well as real-time system conditions including inertia. Case studies show the proposed control method meets the frequency nadir requirements using minimal power reserves compared to a fixed headroom control approach.

14 SOLAR ENERGY↗