Search NASA⌕ Search

SEARCH · Search NASA

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Frequency-Based Spatial Correlation Assessments of the Ares I Subscale Acoustic Model Test Firings

The Marshall Space Flight Center has performed a series of test firings to simulate and understand the acoustic environments generated for the Ares I liftoff profiles. Part of the instrumentation package had special sensor groups to assess the acoustic field spatial correlation features for the various test configurations. The spatial correlation characteristics were evaluated for all of the test firings, inclusive of understanding the diffuse to propagating wave amplitude ratios, the acoustic wave decays, and the incident angle of propagating waves across the sensor groups. These parameters were evaluated across the measured frequency spectra and the associated uncertainties for each parameter were estimated.

Kenny, R. Jeremy↗
NASA NTRS1990

Estimation of minority carrier diffusion lengths in InP/GaAs solar cells

Minority carrier diffusion length is one of the most important parameters affecting the solar cell performance. An attempt is made to estimate the minority carrier diffusion lengths is the emitter and base of InP/GaAs heteroepitaxial solar cells. The PC-1D computer model was used to simulate the experimental cell results measured at NASA Lewis under AMO (air mass zero) spectrum at 25 C. A 16 nm hole diffusion length in the emitter and a 0.42 micron electron diffusion length in the base gave very good agreement with the I-V curve. The effect of varying minority carrier diffusion lengths on cell short current, open circuit voltage, and efficiency was studied. It is also observed that the front surface recombination velocity has very little influence on the cell performance. The poor output of heteroepitaxial cells is caused primarily by the large number of dislocations generated at the interfaces that propagate through the bulk indium phosphide layers. Cell efficiency as a function of dislocation density was calculated and the effect of improved emitter bulk properties on cell efficiency is presented. It is found that cells with over 16 percent efficiencies should be possible, provided the dislocation density is below 10(exp 6)/sq cm.

Jain, R. K.↗
NASA NTRS1950

Two-dimensional compressible flow in centrifugal compressors with straight blades

Six numerical examples are presented for steady, two-dimensional, compressible, nonviscous flow in centrifugal compressors with thin straight blades, the center lines of which generate the surface of a right circular cone when rotated about the axis of the compressor. A seventh example is presented for incompressible flow. The solutions were obtained in a region of the compressors, including the impeller tip, that was considered to be unaffected by the diffuser vanes or by the impeller-inlet configuration. Each solution applies to radial and mixed flow compressors with various cone angles but with the same angle between blades on the conic flow surface. The solution also apply to radial and mixed flow turbines with the rotation and the flow direction reversed. The effects of variations in the following parameters were investigated: (1) flow rate, (2) impeller-tip speed, (3) variation of passage height with radius, and (4) angle between blades on conic flow surface. The numerical results are presented in plots of the streamlines and constant Mach number lines. Correlation equations are developed whereby the flow conditions in any impeller with straight blades can be determined (in the region investigated by this analysis) for all operating conditions.

Stanitz, John D↗
NASA NTRS1992

Computational fluid dynamics study of the variable-pitch split-blade fan concept

A computational fluid dynamics study was conducted to evaluate the feasibility of the variable-pitch split-blade supersonic fan concept. This fan configuration was conceived as a means to enable a supersonic fan to switch from the supersonic through-flow type of operation at high speeds to a conventional fan with subsonic inflow and outflow at low speeds. During this off-design, low-speed mode of operation, the fan would operate with a substantial static pressure rise across the blade row like a conventional transonic fan; the front (variable-pitch) blade would be aligned with the incoming flow, and the aft blade would remain fixed in the position set by the supersonic design conditions. Because of these geometrical features, this low speed configuration would inherently have a large amount of turning and, thereby, would have the potential for a large total pressure increase in a single stage. Such a high-turning blade configuration is prone to flow separation; it was hoped that the channeling of the flow between the blades would act like a slotted wing and help alleviate this problem. A total of 20 blade configurations representing various supersonic and transonic configurations were evaluated using a Navier Stokes CFD program called ADAPTNS because of its adaptive grid features. The flow fields generated by this computational procedure were processed by another data reduction program which calculated average flow properties and simulated fan performance. These results were employed to make quantitative comparisons and evaluations of blade performance. The supersonic split-blade configurations generated performance comparable to a single-blade supersonic, through-flow fan configuration. Simulated rotor total pressure ratios of the order of 2.5 or better were achieved for Mach 2.0 inflow conditions. The corresponding fan efficiencies were approximately 75 percent or better. The transonic split-blade configurations having large amounts of turning were able to generate large amounts of total turning and achieve simulated total pressure ratios of 3.0 or better with subsonic inflow conditions. These configurations had large losses and low fan efficiencies in the 70's percent. They had large separated regions and low velocity wakes. Additional turning and diffusion of this flow in a subsequent stator row would probably be very inefficient. The high total pressure ratios indicated by the rotor performance would be substantially reduced by the stators, and the stage efficiency would be substantially lower. Such performance leaves this dual-mode fan concept less attractive than originally postulated.

Kepler, C. E.↗
NASA NTRS2020

SNPP and N20 VIIRS Solar Vector Orientation Knowledge Error Detected by SDSM Sun Views

The Visible Infrared Imaging Radiometer Suite (VIIRS) is a passive scanning Earth observing satellite radiometer. The VIIRS has 22 spectral bands with design center wavelengths from 0.41 to 12.01 μm, providing data to generate more than 20 Earth’s biogeophysical parameters. Fourteen of the 22 VIIRS bands are the reflective solar bands (RSBs), detecting Earth reflected sunlight. To ensure data quality, regular on-orbit radiometric calibrations of the RSBs are performed, mainly through observations of an onboard solar diffuser (SD). The spectral radiance provided by the sunlit SD depends on the SD screen transmittance which is a function of the solar vector orientation. Additionally, on orbit the SD’s bidirectional reflectance distribution function (BRDF) changes its value due to solar bombardment. The BRDF change is derived from the SD stability monitor (SDSM) measurements. The SDSM views the Sun through a screen with through holes (the SDSM screen) and the SD at almost the same time. The time series of the ratio of the signal strengths is a measure of the SD BRDF on-orbit change. Hence the measurements of the on-orbit SD BRDF change depends on the SDSM screen relative transmittance which is also solar vector orientation dependent. In this paper for both the SNPP and the NOAA-20 VIIRS instruments we examine the solar vector orientation knowledge error through matching the SDSM screen relative effective transmittances derived from the calibration data collected on the yaw maneuver and the regular orbits.

SNPP↗
NASA NTRS2020

Assessment of MODIS and VIIRS Calibration Consistency for Reflective Solar Bands Using Vicarious Approaches

The Moderate-Resolution Imaging Spectroradiometer (MODIS) is the key instrument of the NASA’s Earth Observing System (EOS) Terra and Aqua missions, launched in December 1999 and May 2002, respectively. The Visible Infrared Imaging Radiometer Suite (VIIRS) expands the MODIS legacy, launched onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite in October 2011 and NOAA20 satellite in November 2017, respectively. The MODIS and VIIRS sensors have a similar design with spectrally matched reflective solar spectral bands (RSB). Their on-board calibration components include a solar diffuser and a solar diffuser stability monitor for RSB, a V-grooved blackbody for the thermal emissive bands (TEB), and a space view as a background reference. This study evaluates the calibration consistency of the Terra and Aqua MODIS RSB based on the current Collection 6.1 L1B data products generated by the NASA MODAPS, which have used consistent calibration coefficient look up tables (LUT) for the entire data-record. In the case of SNPP and NOAA20 VIIRS, the latest L1B data produced by NASA Land SIPS are used. Several independent vicarious approaches are used to examine the stability and consistency of the at-sensor reflectance among MODIS and VIIRS instruments. Vicarious approaches include observations from simultaneous nadir overpasses (SNO), the Libya-4 desert and Dome C snow sites, as well as deep convective clouds (DCC). Impact of existing band spectral difference on the reflectance is corrected using hyperspectral observations provided by Europe Space Agency’s SCIAMACHY sensor. Results of this study provide comprehensive assessments of calibration performance, radiometric agreement and associated uncertainties.

MODIS↗
NASA NTRSDate not supplied

An Alternative Explanation for the Great Oxygenation Event (GOE): Weathering of Rocks Containing Minerals With Peroxy Bonds

During the Great Oxygenation Event (GOE) 2.42.35 Gyrsago, Earth experienced a notable shift in its oxidation state. This has been widely attributed to cyanobacteria having “invented” oxygenic photosynthesis. We present a very different view based on the fact thatoxygen is released from rocks during weathering. If so, the GOE must have been caused by an influx of abiogenicO2 into Earth’s surface environment. Minerals forming Earth’s crust contain impurity hydroxyls such as O3SiOH. Pairs of those are known to undergo a common redox conversion, ubiquitously forming peroxydefects plus H 2 : O 3 SiOH-HOSiO 3 ⇌O 3 Si/ OO \SiO 3 + H 2 Being diffusively mobile, most H 2 will be lost, leaving behind bound O as peroxy. The peroxy defects release O 2 during weathering: O 3 Si/ OO \SiO 3 + H 2 O → O 3 SiOH-HOSiO 3 + 1 ⁄ 2 O 2 We suggest that this abiogenically generated O 2 was responsible for the progressive oxidation of the early Earth and that this abiotic process drove the Great Oxygenation Event (GOE).

Great Oxygenation Event↗
NASA NTRSDate not supplied

IXPECALCARF: vignetting and aperture corrections for IXPE spectropolarimetric data analysis

We report recent updates to IXPECALCARF, a tool developed by the IXPE Science Operation Center to generate Ancillary Response File (ARF) and Modulation Response File (MRF) for X-ray spectropolarimetric data analysis for IXPE. Using the Crab Nebula as a case study, we demonstrate corrections due to IXPE dithering patterns and off-axis corrections for user-defined regions when analyzing diffuse emissions away from the IXPE optical axis.

IXPE↗
NASA NTRS1988

Generation, saturation, and convection of electrostatic waves in Jupiter's shock foot

In this paper, a model is developed for the analysis of the electrostatic waves produced in the shock foot at Jupiter. It is shown that an ion beam instability involving the ions reflected at the shock ramp and the incoming solar-wind electrons produces waves at the observed frequencies and that saturation via orbit diffusion limits the waves to amplitudes near to what is observed. Results from a two-dimensional model of the reflected beam in the foot indicate that the waves propagate against the solar wind away from the shock ramp and are amplified up to their saturation amplitudes. The saturation results, combined with the electron temperature profile due to wave-particle interactions predicted by quasi-linear theory, reproduce a wave amplitude profile for the shock foot that is in reasonable agreement with the observations.

Moses, S. L.↗
NASA NTRS1974

Nonlinear theory of electron neutralization waves in ions beams with dissipation

An analytical theory of nonlinear neutralization waves generated by injection of electrons from a grid in the direction of a homogeneous ion beam of uniform velocity and infinite extension is presented. The electrons are assumed to interact with the ions through the self-consistent space charge field and by strong collective interactions, while diffusion in the pressure gradient is disregarded (zero-temperature approximation). The associated nonlinear boundary-value problem is solved in closed form by means of a von Mises transformation. It is shown that the electron gas moves into the ion space in the form of a discontinuous neutralization wave, which exhibits a periodic field structure (incomplete neutralization). This periodic wave structure is damped out by intercomponent momentum transfer - i.e., after a few relaxation lengths a quasi-neutral plasma results.

Wilhelm, H. E.↗
NASA NTRS1976

Remarks on the construction of a second-order closure description of turbulent reacting flows

In this paper an attempt is made to illustrate how second-order closure techniques might be used to make detailed calculations of turbulent diffusion flames. Two of the problems of closure that are peculiar to turbulent chemically reacting flows are discussed in some detail. These are the problem of computing in a consistent way all the correlations of fluctuations in scalar quantities needed for closure and the problem of the generation of turbulence by chemical reactions. Tentative closure models are put forward for both of these problems. Although the closure model for fluctuations in scalar quantities can, to a certain extent, be checked against idealized numerical examples for which exact solutions are known, the validity of both the closure models proposed here must, in the end, be determined by detailed comparison of computed results with experimental data.

DONALDSON C. DUP.↗
NASA NTRS1976

Anomalous resistivity resulting from electrostatic ion cyclotron turbulence

The paper considers the generation of electrostatic ion cyclotron turbulence in an isothermal isotropic magnetized plasma where the drift velocity is below that of the ion-acoustic threshold. The saturated turbulence spectrum is found to be that which results from anomalous nonlinear wave damping related to stochastic ion-orbit diffusion in configuration space. An expression is obtained for the collective electrical resistivity resulting from current-driven electrostatic ion cyclotron turbulence.

Ionson, J. A.↗
NASA NTRS1994

Interactions between solidification and compositional convection in mushy layers

Mushy layers are ubiquitous during the solidification of alloys. They are regions of mixed phase wherein solid crystals are bathed in the melt from which they grew. The matrix of crystals forms a porous medium through which the melt can flow, driven either by external forces or by its own buoyancy in a gravitational field. Buoyancy-driven convection of the melt depends both on temperature gradients, which are necessary for solidification, and on compositional gradients, which are generated as certain components of the alloy are preferentially incorporated in the solid phase and the remaining components are expelled into the melt. In fully liquid regions, the combined action of temperature and concentration on the density of the liquid can cause various forms of double-diffusive convection. However, in the interior of mushy regions the temperature and concentration are thermodynamically coupled so only single-diffusive convection can occur. Typically, the effect of composition on the buoyancy of the melt is much greater than the effect of temperature, and thus convection in mushy layers in driven primarily by the computational gradients within them. The rising interstitial liquid is relatively dilute, having come from colder regions of the mushy layer, where the liquidus concentration is lower, and can dissolve the crystal matrix through which it flows. This is the fundamental process by which chimneys are formed. It is a nonlinear process that requires the convective velocities to be sufficiently large, so fully fledged chimneys (narrow channels) might be avoided by means that weaken the flow. Better still would be to prevent convection altogether, since even weak convection will cause lateral, compositional inhomogeneities in castings. This report outlines three studies that examine the onset of convection within mushy layers.

Worster, M. Grae↗
NASA NTRS1993

A diffusion-limited aggregation model for the evolution of drainage networks

We propose a modified diffusion-limited aggregation (DLA) model for the evolution of fluvial drainage networks. Random walkers are introduced randomly on a grid, and each two-dimensional random walk proceeds until the walker finds a drainage network on which to accrete. This model for headward growth of drainage networks generates drainage patterns remarkably similar to actual drainages. The model also predicts statistical features which agree with actual networks, including the frequency-order (bifurcation) ratio (R(sub b) = 3.98) and the stream length-order (R(sub r) = 2.09). Using the definition of network fractal dimension D = log R(sub b)/log R(sub r), we find that our DLA model gives D = 1.87, near the observed range of D approximately equal to 1.80 - 1.85.

Masek, Jeffrey G.↗
NASA NTRS1980

Long-time creep behavior of the niobium alloy C-103

The creep behavior of C-103 was studied as a function of stress, temperature, and grain size for test times to 19000 hr. Over the temperature range 827 to 1204 C and the stress range 6.89 to 138 MPa, only tertiary (accelerating) creep was observed. The creep strain epsilon can be related to time t by an exponential relation epsilon = epsilon(0) + K e raised to power (st) - 1), where epsilon (0) is initial creep strain, K is the tertiary creep strain parameter, and s is the tertiary creep rate parameter. The observed stress exponent 2.87 is similar to the three power law generally observed for secondary (linear) creep of Class I solid solutions. The apparent activation energy 374 kj/g mol is close to that observed for self diffusion of pure niobium. The initial tertiary creep rate was slightly faster for fine grained than for coarse-grained material. The strain parameter K can be expressed as a combination of power functions of stress and grain size and an exponential function of temperature. Strain time curves generated by using calculated values for K and s showed reasonable agreement with observed curves to strains of at least 4 percent. The time to 1 percent strain was related to stress, temperature, and grain size in a similar manner as the initial tertiary creep rate.

Titran, R. H.↗
NASA NTRS1983

Exit of boundary layer plasma from the distant magnetotail

It is pointed out that the boundary layer plasma must somehow leave the magnetospheric system. It is proposed that the boundary layers on the dawn and dusk flanks are continued into the far magnetotail, becoming joined together far downstream, still on closed magnetic field lines. Within the combined layer there would be a dusk to dawn electric field for antisunward convection (as is the case for the boundary layers on the dawn and dusk flanks nearer to the earth). It is suggested that the boundary layer flow is so massive that the flow itself can generate the right electric field for continued flow. Most of the plasma in the mantle over the polar caps would also be convected out in a similar manner, rather feeding the plasma sheet. There would be a stagnation point inside the magnetotail, with any boundary or mantle plasma diffusing earthward of this point becoming the plasma sheet. It is deduced that no steady state solution is possible.

Heikkila, W. J.↗
NASA NTRS1994

Axial and centrifugal pump meanline performance analysis

A meanline pump flow modeling method has been developed to provide a fast capability for modeling pumps of cryogenic rocket engines. Based on this method, a meanline pump flow code (PUMPA) has been written that can predict the performance of pumps at off-design operating conditions, given the loss of the diffusion system at the design point. The design point rotor efficiency is obtained from empirically derived correlations of loss to rotor specific speed. The rapid input setup and computer run time for the meanline pump flow code makes it an effective analysis and conceptual design tool. The map generation capabilities of the PUMPA code provide the information needed for interfacing with a rocket engine system modeling code.

Veres, Joseph P.↗
NASA NTRS1999

Step Bunching: Influence of Impurities and Solution Flow

Step bunching results in striations even at relatively early stages of its development and in inclusions of mother liquor at the later stages. Therefore, eliminating step bunching is crucial for high crystal perfection. At least 5 major effects causing and influencing step bunching are known: (1) Basic morphological instability of stepped interfaces. It is caused by concentration gradient in the solution normal to the face and by the redistribution of solute tangentially to the interface which redistribution enhances occasional perturbations in step density due to various types of noise; (2) Aggravation of the above basic instability by solution flowing tangentially to the face in the same directions as the steps or stabilization of equidistant step train if these flows are antiparallel; (3) Enhanced bunching at supersaturation where step velocity v increases with relative supersaturation s much faster than linear. This v(s) dependence is believed to be associated with impurities. The impurities of which adsorption time is comparable with the time needed to deposit one lattice layer may also be responsible for bunching; (4) Very intensive solution flow stabilizes growing interface even at parallel solution and step flows; (5) Macrosteps were observed to nucleate at crystal corners and edges. Numerical simulation, assuming step-step interactions via surface diffusion also show that step bunching may be induced by random step nucleation at the facet edge and by discontinuity in the step density (a ridge) somewhere in the middle of a face. The corresponding bunching patterns produce the ones observed in experiment. The nature of step bunching generated at the corners and edges and by dislocation step sources, as well as the also relative importance and interrelations between mechanisms 1-5 is not clear, both from experimental and theoretical standpoints. Furthermore, several laws controlling the evolution of existing step bunches have been suggested, though unambiguous conclusions are still missing. Addressing these issues is the major goal of the present project. The theory addressing the above problem, experimental methods, several figures which include: (1) the spatial wave numbers at which the system is neutrally stable as a function of growth velocity for linear kinetics and supersaturation for nonlinear kinetics; (2) a schematic of the experiment of lysozyme crystal growing under conditions of natural convection; (3) fluctuations in time, t, of the normal growth rate, R(t), vicinal slope, p(t) and Fourier Spectra of R(t), discussions and conclusions are presented.

Chernov, A. A.↗