SEARCH · Search NASA

Results for “influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Comprehensive Analysis of Model Parameter Uncertainty Influence on Evaluation of HVAC Operation to Mitigate Indoor Virus: A Case Study for an Office Building in a Cold and Dry Climate

Simulation-based studies of HVAC operation to mitigate indoor virus have been conducted to understand tradeoffs between indoor air quality (IAQ) and energy consumption. However, the influence of model parameter uncertainty in these studies has not been systematically quantified, which is critical when providing guidance to building operators. To address this gap, we identify 20 model parameters for a typical medium office building system in a cold and dry climate that can influence IAQ and energy consumption for indoor virus scenarios. Next, the distributions of the parameter values are estimated from literature and a set of simulation samples for three representative days is generated that simultaneously sample all of the parameters from their distributions. Two HVAC virus mitigation strategies are studied: increased filtration using MERV 13 filters and increased ventilation, via supply of 100% outdoor air into buildings. The model parameter uncertainty leads to significant variability in the results, particularly for the IAQ because of the highly uncertain virus generation rate. Use of 100% outdoor air can be beneficial for some uncertain scenarios on the hot day, but shows less IAQ improvement and/or significant energy increases on the other days. The virus removal efficiency and pressure drop of the HVAC filter, fan efficiency, and internal heat gain are the most important parameters to determining the tradeoffs of the two strategies. Our results demonstrate how this model parameter uncertainty analysis methodology can provide practical guidance to building operators.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Influence of extreme temperature conditions on CO 2 direct air capture using amino-acid solutions

Geological features play a pivotal role in determining the feasibility of deploying CO₂ direct air capture (DAC) technologies, primarily because they influence the availability of cost-effective energy sources, such as natural gas and geothermal energy, and also due to the potential for CO₂ sequestration. Many regions face challenges due to variable weather conditions including seasonal temperature fluctuations, high or low humidity, and sub-ambient temperatures. These extremes can reduce DAC performance or even lead to catastrophic events. Aqueous solvents considered for DAC systems are particularly vulnerable to seasonal variations in colder climates, where the solvent may underperform or freeze. It is therefore essential to investigate the CO₂ capture efficiency of aqueous solvents across a broad range of environmental temperatures, spanning sub-zero to hot conditions (>30 °C). In this study, DAC operation is examined using a high-flux solvent–air crossflow contactor under two major weather scenarios: (i) cold conditions below 0 °C and (ii) hot conditions above 30 °C. A parametric study is conducted to investigate the contactor performance regarding CO₂ removal efficiency, uptake capacity, and reaction kinetics versus temperature when the air velocity through the contactor exceeds 1 m/s. The efficacy of the contactor is systematically investigated using various anti-freeze amino-acid solvent formulations. A mass-transfer mechanistic model is developed to assess the process performance over a wide temperature range and propose scalable design guidelines. Machine learning is also employed to identify key parameters affecting the CO₂ capture efficiency. It is shown that air velocity and temperature are the primary factors influencing CO₂ uptake. Based on performance data obtained under subfreezing temperatures, a technoeconomic analysis is conducted to evaluate the feasibility of using aqueous solvents in seasonal cold regions. In conclusion, the findings of this study provide valuable insights into siting considerations for deploying solvent-based DAC, thereby contributing to the advancement of sustainable carbon removal solutions.

Air–liquid contactor↗

DOE OSTI2013

Resistance of biofilm-covered mortars to microbiologically influenced deterioration simulated by sulfuric acid exposure

Following the reported success of biofilm applications on metal surfaces to inhibit microbiologically influenced corrosion, effectiveness and sustainability of E. coli DH5α biofilm on mortar surface to prevent microbiologically influenced concrete deterioration (MICD) are investigated. Experiments simulating microbial attack were carried out by exposing incrementally biofilm-covered mortar specimens to sulfuric acid solutions with pH ranging from 3 to 6. Results showed that calcium concentration in control reactors without biofilm was 23–47% higher than the reactors with biofilm-covered mortar. Formation of amorphous silica gel as an indication of early stages of acid attack was observed only on the control mortar specimens without biofilm. During acidification, the biofilm continued to grow and its thickness almost doubled from ∼ 30 μm before acidification to ∼ 60 μm after acidification. These results demonstrated that E. coli DH5α biofilm was able to provide a protective and sustainable barrier on mortar surfaces against medium to strong sulfuric acid attack. -- Highlights: •Effectiveness of E.coli DH5α biofilm to prevent MICD was studied. •Conditions that lead to MICD were simulated by chemical acidification. •Biofilm-covered mortar specimens were exposed to sulfuric acid solutions. •The presence of biofilm helped reduce the chemically-induced mortar deterioration. •Biofilm remained alive and continued to grow during the acidification process.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Influence of spraying on the early hydration of accelerated cement pastes

In practice, most of the studies about the interaction between cement and accelerators is performed with hand-mixed pastes. However, in many applications mixing occurs through spraying, which may affect accelerators reactivity and the microstructure of the hardened paste. The objective of this study is to analyze how the mixing process influences the early hydration of accelerated cement pastes. Isothermal calorimetry, X-ray diffraction, thermogravimetry and SEM imaging were performed on cement pastes produced by hand-mixing and by spraying, using equivalent doses of an alkali-free and an alkaline accelerator and two types of cement. Results showed a great influence of the spraying process on the reactivity of accelerators and on the morphology of the precipitated hydrates. Variations in hydration kinetics caused by the mixing method are explained and the results obtained might have a significant repercussion on how future research on the behavior of accelerated mixes will be performed.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Influence of flowability, casting time and formwork geometry on fiber orientation and mechanical properties of UHPFRC

In this study, fiber orientation in ultra-high-performance fiber-reinforced-concrete (UHPFRC) with different formwork geometry was evaluated using visualization model concrete and via analysis involving 3D visualization based on X-ray computed tomography (CT). Differences in fiber orientation in the height direction were first reviewed. Furthermore, the influence of flowability and casting time on the fiber orientation and mechanical properties of UHPFRC were examined. The results indicated that flowability dictates eventual fiber orientation in parts close to the surfaces of formwork. The use of UHPFRC with superior flowability results in more fibers being oriented parallel to the longitudinal direction of slabs in comparison to UHPFRC with inferior flowability. It was also found that flowability and casting time can have strong influences on the mechanical properties of UHPFRC. Residual flexural strength after initial cracking exhibited perfect linear dependence on the effective number of fibers at fracture planes.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete

Combined mechanical and environmental actions reduce service life of reinforced concrete structures more than each of the participating actions alone. In this contribution, the influence of freeze-thaw cycles on capillary water absorption and chloride penetration into ordinary concrete with two different water-cement ratios and air-entrained concrete was investigated. Water profiles in concrete were quantified by neutron radiography. Capillary water absorption and chloride penetration are both slowed down considerably by air entrainment. Chloride ions dissolved in water are filtered out of the penetrating salt solution and remain concentrated near the surface. Capillary water absorption and chloride penetration into ordinary concrete are accelerated considerably by frost damage. After exposure to freeze-thaw cycles a damage gradient from the surface to the center of the samples was observed. Transport mechanisms were studied in some detail and the data obtained can serve as a basis for more realistic prediction of service life of reinforced concrete structures under the influence of combined freeze-thaw cycles and chloride penetration.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Thermal conductivity of cement paste: Influence of macro-porosity

Thermal conductivity of cement paste is significantly influenced by the presence of macro-pores within it. These pores (pores with size greater than 6 μm, measured using microCT) which may be filled with air and/or water significantly alters the thermal conductivity of the resulting material. A combination of experiments, molecular dynamic investigations of major constituents of the cement paste, multiscale homogenization techniques, and inclusion of thermal conductivity of the pores containing either air or water has been utilized in this study to reveal the influence of pores in the calculation of thermal conductivity of the composite material.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Influence of CaO/FeO ratio on the formation mechanism and properties of alkali-activated Fe-rich slags

Highlights: • Effect of the CaO/FeO molar ratio in alkali-activated Fe-rich slags is unraveled. • Low CaO/FeO molar ratios enhance the early kinetics and compressive strength. • Reaction extent and strength further increase with higher CaO/FeO ratio after 7 days. • Fe{sup 2+}-trioctahedral layers of the binder are hydroxylated and in a silicate phase. • The final strength is determined by the influence of Ca on the reaction products. In the search for CO{sub 2} mitigating cement technologies, alkali-activated Fe-rich slags present a possible alternative. The influence of the chemical composition of the synthetic Fe-silicate slag on the reaction mechanisms is assessed by varying the CaO/FeO molar ratio. The alkali-activated Fe-rich slags consist of trioctahedral layers that are shown to be hydroxylated and in contact with silicates, in a similar way to phyllosilicate minerals. The formation of this phyllosilicate-like structure is hindered during the first days for samples with high CaO/FeO ratios, because of the partial incorporation of Ca in the trioctahedral layers. At later ages, the samples with higher CaO/FeO ratios gain in reaction extent, to exceed the reaction extent of low CaO/FeO ratios at 28 days and beyond. The increase in compressive strength is even more pronounced than the effect on the reaction extent, which underlines the importance of Ca on the inherent strength of the binding phases.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Influence of SiC microstructure on its corrosion behavior in molten FLiNaK salt

The influence of the microstructure on the corrosion rate of three monolithic SiC samples in FLiNaK salt at 900 °C for 250 h was studied. The SiC samples, labeled as SiC-1, SiC-2, and SiC-3, had corrosion rates of 0.137, 0.020, and 0.043 mg/cm 2 h, respectively. Compared with grain size and the presence of special grain boundaries (i.e., Σ3), the content of high-angle grain boundaries (HAGBs) appeared to have the strongest influence on the corrosion rate of SiC in FLiNaK salt, since the corrosion rate increased six times as the concentration of high-angle grain boundaries increased from 19 to 32% for SiC-2 and SiC-1, respectively. The results here stress the importance of controlling the content of HAGBs during the production process of SiC.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Virion glycosylation influences mycobacteriophage immune recognition

Glycosylation of eukaryotic virus particles is common and influences their uptake, trafficking, and immune recognition. In contrast, glycosylation of bacteriophage particles has not been reported; phage virions typically do not enter the cytoplasm upon infection, and they do not generally inhabit eukaryotic systems. We show here that several genomically distinct phages of Mycobacteria are modified with glycans attached to the C terminus of capsid and tail tube protein subunits. These O-linked glycans influence antibody production and recognition, shielding viral particles from antibody binding and reducing production of neutralizing antibodies. Glycosylation is mediated by phage-encoded glycosyltransferases, and genomic analysis suggests that they are relatively common among mycobacteriophages. Putative glycosyltransferases are also encoded by some Gordonia and Streptomyces phages, but there is little evidence of glycosylation among the broader phage population. The immune response to glycosylated phage virions in mice suggests that glycosylation may be an advantageous property for phage therapy of Mycobacterium infections.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Influence of ion-pairing reagents on the separation of intact glycoproteins using hydrophilic-interaction liquid chromatography - high-resolution mass spectrometry

Hydrophilic-interaction liquid chromatography (HILIC) of intact proteins offers high-resolution separations of glycoforms of glycoproteins differing in the number of (neutral) glycans. However, to obtain efficient separations it is essential that the positively charged sites of the proteins are shielded by acidic (negative) ion-pair reagents (IPRs), so as to enhance the contribution of the hydroxyl groups of the (neutral) sugars in the glycoprotein. Here, we studied the influence of various IPRs that differ in physico-chemical properties, such as hydrophobicity and acidity, on the capillary-scale HILIC separation of intact (glyco)proteins. We evaluated the use of fluoroacetic acid (MFA), difluoroacetic acid (DFA), trifluoroacetic acid (TFA), and heptafluorobutyric acid (HFBA) as diluents for sample preparation, as solvents for sample loading on a reversed-phase trap prior to the HILIC separation, and as mobile-phase components for HILIC and HILIC-MS. To reduce the contribution of ion-exchange interaction with the (silica-based) stationary phase, we used an acrylamide-based monolithic column. We studied the influence of the different IPRs on each step of the separation of a mixture of proteins of different size and hydrophilicity and on the separation of the five glycoforms of ribonuclease B. The content of IPR in the sample was shown not to affect the separation and the MS detection. However, a low content of TFA and DFA in the mobile phase is favourable, as it reduces adduct formation and leads to higher signal intensity. The optimized HILIC conditions successfully resolved nine major glycoforms groups of a ~40 kDa glycoprotein horseradish peroxidase (HRP), as an example of a complex glycoprotein.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2013

Do indicators influence communication in SEA? — Experience from the Chinese practice

Indicators have become one of the primary tools for Strategic Environmental Assessment (SEA) in the Chinese context, but what does this use of indicators mean for communication within the SEA processes? This article explores how the selection and use of indicators influence the communication between different stakeholders involved in SEA. The article provides a conceptual communication model covering directions and level of communication. Using this model on empirical findings from interviews with two specific SEA cases and from general experience collected through an online survey, the results suggest that indicators are used mainly in internal communication although a change of approach, with more external communication and stakeholder engagement, is taking place as a consequence of working with indicators in the SEA. However, the external communication mainly involves the experts and other relevant sectors (planning, energy, land use, forestry, etc.), the involvement of the public and NGOs is still not well implemented in Chinese SEA practice, and the direction of communication is mainly one-way channel of providing information rather than a two-way channel of dialogue and participation. Highlights: • Exploring indicators' influence on the communication in SEA with Chinese experience. • Providing a conceptual model covering directions and level of communication in SEA. • Empirical findings from two specific SEA cases and collected general experience. • The external communication mainly involves the experts and other sectors. • More one-way information provision than two-way dialogue and participation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2016

Cumulative effects in strategic environmental assessment: The influence of plan boundaries

Cumulative effects (CE) assessment is lacking quality in impact assessment (IA) worldwide. It has been argued that the strategic environmental assessment (SEA) provides a suitable IA framework for addressing CE because it is applied to developments with broad boundaries, but few have tested this claim. Through a case study on the Danish mining sector, this article explores how plan boundaries influence the analytical boundaries applied for assessing CE in SEA. The case was studied through document analysis in combination with semi-structured group interviews of the responsible planners, who also serve as SEA practitioners. It was found that CE are to some extent assessed and managed implicitly throughout the planning process. However, this is through a focus on lowering the cumulative stress of mining rather than the cumulative stress on and capacity of the receiving environment. Plan boundaries do influence CE assessment, though all boundaries are not equally influential. The geographical and time boundaries of the Danish mining plans are broad or flexible enough to accommodate a meaningful assessment of CE, but the topical boundary is restrictive. The study indicates that collaboration among planning authorities and legally appointed CE leadership may facilitate better practice on CE assessment in sector-specific SEA contexts. However, most pressing is the need for relating assessment to the receiving environment as opposed to solely the stress of a proposed plan.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2016

Influences of yaw angle and turbulence intensity on the performance of a 20 kW in-stream hydrokinetic turbine

Herein three-dimensional transient CFD (Computational Fluid Dynamics) simulations are performed to study the hydrodynamic performance of an ocean current turbine with a 3.0 m diameter 3-bladed rotor. Simulations are based on the RANS (Reynolds Averaged Navier–Stokes) equations and the shear stress transport k-ω turbulent model is utilized. The influence of yaw angle and upstream TI (turbulence intensity) on the turbine performance is studied. The CFD method is first validated using existing experimental data and good agreement is obtained. The performance of the turbine, including power, thrust and wake characteristics are then studied at different TSR (tip speed ratios). The turbine obtains a maximum coefficient of power (C p ) of 0.4642 at TSR = 6 and the coefficient of thrust (C t ) increases over the entire evaluated TSR range to a value of 0.8788 at a TSR = 10. Simulations are also performed at four different yaw angles, 0°, 5°, 10° and 15° which show that both C p and C t decrease as yaw angle increases. Finally simulations of three different TIs, 3%, 6% and 9%, are performed and analyzed. Results show that TI minimally affects C p and C t for the considered TI range, but greatly influences the downstream wake structure.

13 HYDRO ENERGY↗

DOE OSTI2022

4D electrical resistivity tomography for assessing the influence of vegetation and subsurface moisture on railway cutting condition

Instability of slopes, embankments, and cuttings on the railway network is increasingly prevalent globally. Monitoring vulnerable infrastructure aids in geotechnical asset management, and improvements to transport safety and efficiency. Here, we examine the use of a novel, near-real-time Electrical Resistivity Tomography (ERT) monitoring system for assessing the stability of a railway cutting in Leicestershire, United Kingdom. In 2015, an ERT monitoring system was installed across a relict landslide (grassed) and an area of more stable ground on either side (wooded), to monitor changes in electrical resistivity through time and space, and to assess the influence of different types of vegetation on the stability of transportation infrastructure. Two years of 4-Dimensional ERT monitoring results are presented here, and petrophysical relationships developed in the laboratory are applied to calibrate the resistivity models in order to provide an insight into hydrogeological pathways within a railway cutting. The influence of vegetation type on subsurface moisture pathways and on slope stability is also assessed – here we find that seasonal subsurface changes in moisture content and soil suction are exacerbated by the presence of trees (wooded area). This results in shrink-swell behaviour of the clays comprising the railway cutting, resulting in fissuring and a reduction in shear strength, leading to instability. As such, it is proposed that on slopes comprised of expansive soils, grassed slopes are beneficial for stability. Insights into the use of 4-D ERT for monitoring railway infrastructure gained from this study may be applied to the monitoring of critical geotechnical assets elsewhere.

58 GEOSCIENCES↗

DOE OSTI2015

POPs in free-ranging pilot whales, sperm whales and fin whales from the Mediterranean Sea: Influence of biological and ecological factors

The pilot whale Globicephala melas, the sperm whale Physeter macrocephalus, and the fin whale Balaenoptera physalus are large cetaceans permanently inhabiting the Mediterranean Sea. These species are subjected to numerous anthropogenic threats such as exposure to high levels of contaminants. Therefore, selected persistent organic pollutants POPs (29 PCBs, 15 organochlorine compounds, 9 PBDEs and 17 PCDD/Fs) were analysed in blubber biopsies of 49 long-finned pilot whales, 61 sperm whales and 70 fin whales sampled in the North Western Mediterranean Sea (NWMS) from 2006 to 2013. Contamination profile and species feeding ecology were then combined through the use of stable isotopes. δ{sup 13}C, δ{sup 15}N values and POPs levels were assessed through IR-MS and GC–MS respectively. To assess the toxic potency of the dioxin-like compounds, the TEQ approach was applied. δ{sup 15}N values were 12.2±1.3‰ for sperm whales, 10.5±0.7‰ for pilot whales and 7.7±0.8‰ in fin whales, positioning sperm whales at higher trophic levels. δ{sup 13}C of the two odontocetes was similar and amounted to −17.3±0.4‰ for sperm whales and −17.8±0.3‰ for pilot whales; whilst fin whales were more depleted (−18.7±0.4‰). This indicates a partial overlap in toothed-whales feeding habitats, while confirms the differences in feeding behaviour of the mysticete. Pilot whales presented higher concentrations than sperm whales for ΣPCBs (38,666±25,731 ng g{sup −1} lw and 22,849±15,566 ng g{sup −1} lw respectively), ΣPBDEs (712±412 ng g{sup −1} lw and 347±173 ng g{sup −1} lw respectively) and ΣDDTs (46,081±37,506 ng g{sup −1} lw and 37,647±38,518 ng g{sup −1} lw respectively). Fin whales presented the lowest values, in accordance with its trophic position (ΣPCBs: 5721±5180 ng g{sup −1} lw, ΣPBDEs: 177±208 ng g{sup −1} lw and ΣDDTs: 6643±5549 ng g{sup −1} lw). Each species was characterized by large inter-individual variations that are more related to sex than trophic level, with males presenting higher contaminant burden than females. The discriminant analysis (DA) confirmed how DDTs and highly chlorinated PCBs were influential in differentiating the three species. Pollutant concentrations of our species were significantly higher than both their Southern Hemisphere and North Atlantic counterparts, possibly due to the particular Mediterranean geomorphology, which influences pollutants distribution and recycle. Dioxin-like PCBs accounted for over 80% of the total TEQ. This study demonstrated (1) an important exposure to pollutants of Mediterranean cetaceans, often surpassing the estimated threshold toxicity value of 17,000 ng g{sup −1} lw for blubber in marine mammals; and (2) how the final pollutant burden in these animals is strongly influenced not only by the trophic position but also by numerous other factors such as sex, age, body size and geographical distribution. - Highlights: • We analysed POPs concentrations in cetaceans from North-western Mediterranean Sea. • We integrated δ{sup 13}C and δ{sup 15}N values to combine trophic position and contamination. • Odontocetes show PCBs level higher than the toxicity threshold of 17 μg g{sup −1} lw. • Trophic position, sex, body size and distribution affect interspecies diversity.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Role of fuel properties and piston shape in influencing soot oxidation in heavy-duty low swirl diesel engine combustion

The presented study evaluated effects on soot emissions of important diesel fuel properties (e.g. volatility T95, hydrogen to-carbon ratio H/C and oxygen content O/C) in a heavy-duty, low-swirl, direct injection diesel engine operated with cooled exhaust gas recirculation to control the emissions of nitrogen oxides. Variation of injection pressure was conducted in three representative operation points in the single-cylinder engine including conventional and wave piston bowl types. Additionally, detailed optical combustion studies were performed in a high pressure/high temperature combustion chamber with an engine-like flame-wall interaction geometry. The fuel properties mainly influenced parameters relating to events near the nozzle, such as the ignition delay, flame lift-off distance and spray air entrainment. Oxygenation of the fuel reduced soot formation (a known effect of spray-jet dilution), but the fuels’ H/C and T95 also influenced soot emissions. Viscosity, heating value and density, treated as secondary fuel parameters, affected the injected fuel’s kinetic energy, and hence mean flow field and local turbulent mixing late in the combustion cycle. The results suggested that fuel effects on soot oxidation during late phases of combustion are mainly governed by parameters related to the fuel injection profile under the specific cylinder gas conditions. With an oxygenated fuel, flow structures (local turbulent side vortices) which are typical for the investigated engine type were found to form in a similar way as with a reference fuel. Hence, improved internal flow using a wave piston in combination with a low-sooting oxygenated fuel gave additional reductions in net soot emissions.

42 ENGINEERING↗

DOE OSTI2020

Influence of manganese abundances on iron and arsenic solubility in rice paddy soils

Arsenic (As) mobilization in rice paddy soils under fluctuating redox conditions is influenced by the biogeochemical cycling of redox sensitive elements such as iron (Fe) and manganese (Mn). Arsenic mobility in paddy soils is highly variable, and the influence of Mn abundances and Mn/Fe ratios on As mobility in these soils have received little attention. In this contribution, we developed a complementary set of field and laboratory experiments designed to evaluate the impact of Mn on interconnected Fe and As solubilization in rice paddy soils experiencing wetting-drying cycles through controlled irrigation. Porewater monitoring and synchrotron-based imaging and spectroscopy of thin sections prepared from an Arkansas paddy soil confirmed that As release was primarily governed by reductive dissolution of Fe (oxy)hydroxide phases. Experiments with laboratory soil microcosms amended with the synthetic nanocrystalline Mn oxide, δ-MnO 2 , showed that higher initial Mn/Fe inhibited Fe and As mobilization into porewater relative to unamended soil by up to 95% and 45%, respectively. Geochemical modeling suggests that pH increases driven by microbial MnO 2 reduction, in conjunction with microbial Fe- and sulfate-reduction in carbonate-rich porewater, enhanced the precipitation of siderite (FeCO 3(s) ), mackinawite (FeS (s) ), and potentially a Mn(II) arsenate phase. These secondary mineral phases likely played a greater role in controlling As solubilization than the role of Mn as a redox buffer regulating the redox conditions in the flooded soils. Field and laboratory experiments showed that alternate wetting and drying approaches with a single dry-down can be effective at reducing dissolved As concentrations in porewater through the oxidation of Fe. Differences in soil Mn/Fe ratios had no clear impact on the effectiveness of dry-downs as a strategy to reduce As mobilization.

54 ENVIRONMENTAL SCIENCES↗