Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

The general low-frequency prediction for asymptotically nonlinear material functions in oscillatory shear

We use a fourth-order fluid expansion to make general predictions for asymptotically nonlinear material functions in oscillatory shear, a characterization protocol sometimes known as medium-amplitude oscillatory shear. The calculation applies to any viscoelastic fluid in the terminal regime defined by the limit of Deborah number much less than one. Two viscous nonlinearities appear at third order, with shear stress scaling as ω 3 , and are interrelated by a constant multiplicative factor. Two elastic nonlinearities appear at fourth order, with shear stress scaling as ω 4 , and are also interrelated by a constant multiplicative factor. These nonlinear measures are decoupled from the linear material functions G' and G" because they depend on different expansion coefficients. Experimental measurements are presented for all four asymptotic shear material functions using a linear and well-entangled homopolymer of polyisoprene. Here, the experimental observations are consistent with both the predicted frequency scaling and the predicted interrelations in the terminal regime. Signs and magnitudes cannot be universally predicted, leaving these as free parameters that depend on the specifics of the material microstructure or constitutive model. These general results explain previous observations involving different materials and constitutive models, and provide an important reference for future experiments, analytical results, and numerical computations of these rheological fingerprints.

42 ENGINEERING↗

Modeling of Late Blooming Phases and Precipitation Kinetics in Aging Reactor Pressure Vessel (RPV) Steels

The principle work at the atomic scale is to develop a predictive quantitative model for the microstructure evolution of RPV steels under thermal aging and neutron radiation. We have developed an AKMC method for the precipitation kinetics in bcc-Fe, with Cu, Ni, Mn and Si being the alloying elements. In addition, we used MD simulations to provide input parameters (if not available in literature). MMC simulations were also carried out to explore the possible segregation/precipitation morphologies at the lattice defects. First we briefly describe each of the simulation algorithms, then will present our results.

99 GENERAL AND MISCELLANEOUS↗

The Dynamic Response of Polymers Interrogated by 3rd Generation X-ray Light Sources

Future predictive models of materials response under extreme conditions will be increasingly phaseand microstructure-aware. As such, model development and validation will require new types of experimental data that probe responses at lattice-to-mesoscales in real time during dynamic events. High brilliance X-ray light sources coupled to dynamic driver platforms offer tremendous potential for providing new insights into the physics of materials under dynamic conditions. Over the last several years, data from burgeoning facilities are already challenging historical model assumptions in several areas.

36 MATERIALS SCIENCE↗

Fracture Toughness Properties of Tritium Charged and Aged Stainless Steels: SRNL and SNL Collaboration Test Plan and 2018 Results

Forged stainless steels are used as the materials of construction for tritium reservoirs. During service, tritium diffuses into the reservoir walls and radioactively decays to helium-3. Tritium and decay helium cause a higher propensity for cracking which could lead to a tritium leak or failure of a tritium reservoir. Fracture toughness properties are needed for designing tritium reservoirs and evaluating the long-term effects of tritium on their structural properties. A key result of prior studies is that the long-term cracking resistance of stainless steels in tritium service depends greatly on the interaction between decay helium and the steels’ forged microstructure. Designers and modelers at Sandia National Laboratories (SNL) have identified key gaps in the data available on material performance in tritium. Thus, a collaborative plan and schedule of tests have been developed with SRNL and SNL to fill these gaps using a range of tensile test and fracture mechanics test geometries, at stockpile relevant temperatures. These studies target the fundamental deformation mechanisms and the influence of tritium-decay-helium on their behavior. This report outlines the goals of each program and describes the sample test matrices and experimental conditions. This report fulfills the requirements for a portion of the Enhanced Surveillance Campaign (ESC) FY19 Level 2 milestone 6725 to deliver an annual report on the aging studies of reservoir materials.

36 MATERIALS SCIENCE↗

Radioactive Material Dynamics @ NSLS-II [Slides]

RMD @ NSLS-II helps pave the path to a DMMSC: Developing expertise in techniques and experimental methods for DMMSC science; Improving capabilities for models to become microstructurally aware; Workforce training and development; Help refine DMMSC scientific requirements; Complementary to DMMSC XFEL science (EDXD/EXAFS)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated Computational Materials Engineering (ICME) for Third Generation Advanced High-Strength Steel Development

This paper presents an overview of a four-year project focused on development of an integrated computational materials engineering (ICME) toolset for third generation advanced high-strength steels (3GAHSS). Following a brief look at ICME as an emerging discipline within the Materials Genome Initiative, technical tasks in the ICME project will be discussed. Specific aims of the individual tasks are multi-scale, microstructure-based material model development using state-of-the-art computational and experimental techniques, forming, toolset assembly, design optimization, integration and technical cost modeling. The integrated approach is initially illustrated using a 980 grade transformation induced plasticity (TRIP) steel, subject to a two-step quenching and partitioning (Q&P) heat treatment, as an example.

Savic, Vesna↗

Effect of Recrystallization on Gas Bubble Swelling in UMo Fuels

Recrystallization plays an important role in swelling kinetics of irradiated metallic nuclear fuels. This talk will present a three-dimensional microstructure-dependent swelling model by integrating the evolution of intra-and inter- granular gas bubbles, dislocation loop density, and recrystallization.

Hu, Shenyang↗

Casting Aluminum Alloys: Their Physical and Mechanical Metallurgy

The follow up to the fall 2007 work on the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing, discusses findings from the past decade, including sections on new casting alloys, novel casting technologies, and new methods of alloys design. The book also includes other hot topics, such as the implementation of computational technologies for the calculation of phase equilibria and thermodynamic properties of alloys, the development of software for calculation of diffusion processes in aluminum alloys, computational modeling of solidification microstructure and texture evolution of multi-component aluminum materials.

36 MATERIALS SCIENCE↗

Mechanical response and microstructure evolution from multiaxial stress relaxation in textured zircaloy nuclear cladding

Modern energy markets provide motivation for nuclear reactors to increase operational flexibility and load following capacity of existing reactor designs. The operational power changes result in fuel pellet expansion and contraction resulting in pellet-cladding mechanical interaction (PCMI) and high cladding stresses that are strongly related to stressed corrosion cracking (SCC) which can lead to fuel rod failure. This work aims to quantify the stress fields in cladding with a focus on multiaxial stress relaxation response from an imposed strain and the resulting microstructure changes in textured zircaloy claddings. Stress relaxation tests resulting in multiaxial stress fields are performed to measure the material response of Zircaloy-4 nuclear cladding. Multiple experiments using samples from the same piece of cladding are performed so samples with the same processing history may be removed at strategic points throughout mechanical testing for microstructure characterization. The microstructure evolution is analyzed with mechanical response to evaluate the static recovery impact on crystallographic texture and grain morphology. Experiments are performed at Idaho National Laboratory using an experimental device capable of applying internal pressure and independent axial load to commercial nuclear cladding at elevated temperatures with stress- or strain-controlled experimental capability. X-ray diffraction and electron backscatter diffraction are used for microstructure analysis. Rheological models are used to visualize the multiaxial stress-strain relationships and isolate elastic, plastic, and viscoplastic material properties for analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optimization of Laser-Damage Resistance of Evaporated Hafnia Films at 351 nm

A systematic study was undertaken to improve the laser-damage resistance of multilayer high-reflector coatings for use at 351 nm on the OMEGA EP Laser System. A series of hafnium dioxide monolayer films deposited by electron-beam evaporation with varying deposition rates and oxygen backfill pressures were studied using transmission electron microscopy (TEM), x-ray diffraction (XRD), and refractive index modeling. These exhibit microstructural changes for sufficiently slow deposition rates and high oxygen backfill pressures, resulting in an absence of crystalline inclusions and a lower refractive index. Hafnia monolayers exhibited laser-damage resistance as high as 12 J/cm^2 at 351 nm with a 0.5-ns pulse. This process was utilized in the fabrication of reduced electric-field-type multilayer high-reflector coatings. Measured laser-damage thresholds as high as 16.63 J/cm^2 were achieved under identical test conditions, an exceptional improvement relative to historical damage thresholds of the order of 3 to 5 J/cm^2.

hafnia↗

Modeling the long-term evolution of the primary damage in ferritic alloys using coarse-grained methods

Knowledge of the long-term evolution of the microstructure after introduction of primary damage is an essential ingredient in understanding mechanical property changes that occur during irradiation. Within the European integrated project PERFECT, different techniques have been developed or improved to model microstructure evolution of Fe alloys under irradiation. This review paper aims to present the current state of the art of these techniques, as developed in the project, as well as the main results obtained.

Becquart, C. S.↗

Modeling Oxygen Partial Pressure in Solid Oxide Electrolysis Cells: The Microstructure Effect

Oxygen partial pressure is an important thermodynamic state variable that affects both the performance and degradation of solid oxide electrolysis cells. In this work, a 3D model developed from Virkar’s 1D model has been applied to reconstructed and synthetic microstructures of Ni-YSZ-GDC-LSCF cell. The effect of the microstructures, including the thickness of the YSZ and GDC layer, and the compositions of the hydrogen and oxygen electrode, on the distribution of oxygen partial pressure has been investigated. The results show that the maximum oxygen partial pressure may occur on the interface between oxygen electrode and GDC layer or between GDC layer and YSZ layer depending on the rate of oxygen ion exchange between GDC and YSZ. A thicker GDC layer lowers the maximum oxygen partial pressure in the cell, while a thicker YSZ layer lowers the maximum oxygen partial pressure in the hydrogen electrode. In addition, the Ni:YSZ ratio and porosity also affects the maximum partial pressure. These findings provide insights on mitigating degradation in solid oxide electrolysis cell by tuning the microstructures.

Lei, Yinkai↗

Generalized thermo-mechanical framework for heterogeneous materials through asymptotic homogenization

Abstract A fundamental understanding of the interaction between microstructure and underlying physical mechanisms is essential, especially for developing more accurate multi-physics models for heterogeneous materials. Effects of microstructure on the material response at the macroscale are modeled by using the generalized thermomechanics. In this study, strain gradient theory is employed as a higher-order theory on the macroscale with thermodynamics modeled as a first-order theory on the microscale. Hence, energy depends only on the temperature such that we circumvent an extension of Fourier’s law and analyze the “simplest” thermo-mechanical model in strain gradient elasticity. Developing multiphysics models for heterogeneous materials is indeed a challenge and even this “simplest” model in generalized thermomechanics creates dozens of parameters to be determined. We develop a thermo-mechanical framework, in which microstructure is modeled as a periodic structure and through asymptotic homogenization approach, higher-order parameters at macroscopic scale are calculated. To illustrate the importance of higher-order parameters in overall thermo-mechanical response of a heterogeneous materials, finite element method (FEM) is employed with the aid of open-source codes (FEniCS). Verification example of a bulk system and several case studies of porous structures demonstrate how such numerical framework can be beneficial in the design of materials with tailored microstructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling of flash sintering of ionic ceramics

A fundamental understanding of the influence of defects in ionic ceramics at the atomic, microstructural, and macroscopic levels, before, during, and after the flash sintering event is key to the development of ceramic processing operations that lead to fast, low cost, and environmentally safe fabrication of materials. The observed phenomenology of the flash process encompasses multiple time and length scales and have resulted on a wide variety of what sometimes appears to be contradictory explanations. Here, this article summarizes the latest developments on the modeling and simulation of flash sintering, specifically those related to the understanding of the equilibrium and kinetic properties and the corresponding microstructural evolution of ionic ceramics. Challenges and opportunities in the development of theoretical analyses that include unidentified multiphysical effects are discussed, as they pertain to the processing of technologically relevant ceramic materials for advanced structures and devices.

36 MATERIALS SCIENCE↗

Microstructure, Thermal, and Mechanical Properties Relationships in U and UZr Alloys (Final Report)

Uranium-zirconium (U-Zr) alloys are candidate fuel systems for transmutation based reactors that can be used to burn long-lived minor actinides and fission products in fast spectrum reactors. Metallic fuels have also been gaining more recent attention for applications as accident tolerant fuels, as well as for use in small modular reactors. This research focused on a “science-based” approach to capture the connections between U and U-Zr alloys’ three-dimensional (3-D) microstructure, thermal properties, and mechanical properties through closely coordinated experiments and modeling efforts from the unirradiated to the irradiated fuels. Advanced characterization and modeling techniques were used to understand irradiation-induced microstructural evolution and its direct impact on the thermal and mechanical properties of U and U-Zr fuel. Closely coordinated experiments and modeling were performed to provide crucial data that does not currently exist. Overall, this research spanned multiple length and time scales within the models and experiments. The scope of the research encompassed the understanding of the irradiation effects in U and various U-Zr alloys with particular attention paid to three task areas: (1) microstructural evolution, (2) in-situ/ex-situ thermal and mechanical properties, and (3) multiscale modeling connections to microstructure, thermal, and mechanical properties. This research resulted in (1) the 3-D characterization of neutron irradiated U-Zr fuel in multiple phase regions to better understand fission gas swelling and constituent redistribution, (2) development of a microstructural model linking thermal and mechanical properties via in situ Raman and nanoindentation, (3) and mesoscale phase field modeling was coupled with the AEH method in the MOOSE framework was used to calculate the effective thermal conductivities of U-Zr fuels consisting of α-U and δ-UZr 2 heterogeneous microstructures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Precipitation-site competition in duplex stainless steels: Cu clusters vs spinodal decomposition interfaces as nucleation sites during thermal aging

Competing microstructural evolution mechanisms can exist simultaneously when duplex stainless steels are operating for several decades in a high temperature service environment. Such competition between different microstructural evolution pathways can be difficult to ascertain using simple model alloy systems necessitating detailed structural and compositional analysis of phase transformation mechanisms in complex alloys Thus, in this study duplex stainless steels with complex but well understood chemistries were used to investigate the relative importance of different heterogeneous nucleation sites – specifically spinodal decomposition and Cu clustering – on precipitation of Ni-Si-Mn particles during long term thermal aging. Precipitation of Ni-Si-Mn particles in duplex stainless steels and ferritic steels during thermal aging and irradiation is known to have profound effect on mechanical properties. Using duplex stainless steels with custom modified compositions along with atom probe tomography characterization and first-passage kinetic Monte Carlo (FPKMC) simulations it is revealed that while the interface between Cr and Fe formed during spinodal decomposition can be a pathway for diffusion of Ni, Si, Mn, and Cu, it is not a site that encourages precipitation of Ni-Si-Mn rich particles. Instead, the presence of a higher concentration of Cu in these steels leads to formation of small Cu clusters with high energy interfaces that act as nucleation sites for Ni-Si-Mn particles because of its strong interaction particularly with Ni increasing the chemical driving force for precipitation. These results will help inform predictive models for the use of duplex stainless steels and other precipitation-hardened alloys for extended operation at high temperatures.

Duplex stainless steel, Thermal aging, Precipitati↗

Evaluation of statistical variation of microstructural properties and temperature effects on creep fracture of Grade 91

This report describes three improvements made to a physically-based model for creep and creep rupture in Grade 91 steel developed as part of the Advanced Reactor Technologies program: 1. Progress on transitioning the model framework to the MOOSE finite element package to improve parallel scalability, increase the physical size of the simulations, and incorporate multiphysics effects into the model. 2. The development of a physically-based method of scaling the model parameters to accurately capture creep in Grade 91 for temperatures in the range of 450° to 500° C. 3. Extending the model to account for microstructural statistical variations, specifically capturing the effect of grain boundary energy on the physical parameters underling the model for grain boundary void nucleation and cavitation. Put together, these improvements result in an accurate, predictive model for the physical response of Grade 91 steel over the expected use temperature range for the material in future liquid metal cooled fast reactors. The model can be used to more accurately predict engineering properties of the material for very long service lives, which could lead to safer, more economical future advanced reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗