Search NASA⌕ Search

SEARCH · Search NASA

Results for “mode shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Development of a Multi Megawatt Circulator for X Band

Research is in progress on a TeV-scale linear collider that will operate at 5-10 times the energy of present-generation accelerators. This will require development of high power RF sources generating of 50-100 MW per source. Transmission of power at this level requires overmoded waveguide to avoid breakdown. In particular, the TE{sub 01} circular waveguide mode is currently the mode of choice for waveguide transmission at Stanford Linear Accelerator Center (SLAC) in the Multimode Delay Line Distribution System (MDLDS). A common device for protecting an RF source from reflected power is the waveguide circulator. A circulator is typically a three-port device that allows low loss power transmission from the source to the load, but diverts power coming from the load (reflected power) to a third terminated port. To achieve a low loss, matched, three port junction requires nonreciprocal behavior. This is achieved using ferrites in a static magnetic field which introduces a propagation constant dependent on RF field direction relative to the static magnetic field. Circulators are currently available at X-Band for power levels up to 1 MW in fundamental rectangular waveguide; however, the next generation of RF sources for TeV-level accelerators will require circulators in the 50-100 MW range. Clearly, conventional technology is not capable of reaching the power level required. In this paper, we discuss the development of an X-Band circulator operating at multi-megawatt power levels in overmoded waveguide. The circulator will employ an innovative coaxial geometry using the TE{sub 01} mode. Difficulties in maintaining mode purity in oversized rectangular guide preclude increasing guide area to allow increasing the power level to the desired 50-100 MW range. The TE{sub 01} mode in circular waveguide is very robust mode for transmission of high power in overmoded waveguide. The mode is ideal for transmission of high power microwaves because of its low-losses, zero tangential field on the guide (which minimizes arcing problems) and reduced propensity for mode conversion compared to non-asymmetric circular waveguide modes. Unfortunately, no current designs exist for circulators using the circular TE{sub 01} mode. The basic building block for all low-loss circulators and isolators is a nonreciprocal element with a phase shift dependent on the propagation direction in the guide. Such an element can be constructed by placement of a hollow ferrite rod in a cylindrical waveguide. An inner conductor placed inside the ferrite rod conducts a current pulse that induces an azimuthal magnetic field inside the ferrite. This configuration is depicted in Figure 1a. An alternate configuration using permanent magnets is shown in Figure 1b. Either of these configurations will create a different phase shift for waves propagating in opposite directions along the waveguide axis. This feature can be used to develop a high power circulator. We are currently testing a TE{sub 01} nonreciprocal phase shifter in a 50 MW test stand. This device is in the configuration shown in Figure 1a. The induced differential phase shift and loss will be measured and compared to calculations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Half-integer level shift of vortex bound states in an iron-based superconductor

Vortices in topological superconductors host Majorana zero modes (MZMs), which are proposed to be building blocks of fault-tolerant topological quantum computers. Recently, a new single-material platform for realizing MZM has been discovered in iron-based superconductors, without involving hybrid semiconductor-superconductor structures. Here we report on a detailed scanning tunneling spectroscopy study of a FeTe 0.55 Se 0.45 single crystal, revealing two distinct classes of vortices present in this system which differ by a half-integer level shift in the energy spectra of the vortex bound states. This level shift is directly tied with the presence or absence of zero-bias peak and also alters the ratios of higher energy levels from integer to half-odd-integer. Our model calculations fully reproduce the spectra of these two types of vortex bound states, suggesting the presence of topological and conventional superconducting regions that coexist within the same crystal. Our findings provide strong evidence for the topological nature of superconductivity in FeTe 0.55 Se 0.45 and establish it as an excellent platform for further studies on MZMs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of gadolinium doping on the structure and defects of ceria under fuel cell operating temperature

Correlation between atomic positional shift, oxygen vacancy defects, and oxide ion conductivity in doped ceria system has been established in the gadolinium doped ceria system from X-ray diffraction (XRD) and Raman spectroscopy study at operating temperature (300–600 °C) of Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC). High temperature XRD data are used to quantify atomic positional shift from mean position with temperature. The Raman spectroscopy study shows additional vibration modes related to ordering of defect spaces (Gd{sub Ce}{sup ′}−V{sub o}{sup ••}){sup *} and (2Gd{sub Ce}{sup ′}−V{sub o}{sup ••}){sup x} generated due to association of oxygen vacancies and reduced cerium or dopant cations site (Gd{sup 3+}), which disappear at 450 °C; indicating oxygen vacancies dissociation from the defect complex. The experimental evidences of cation-anion positional shifting and oxygen vacancies dissociation from defect complex in the IT-SOFC operating temperature are discussed to correlate with activation energy for ionic conductivity.

36 MATERIALS SCIENCE↗

Signatures of asymmetry in neutron spectra and images predicted by three-dimensional radiation hydrodynamics simulations of indirect drive implosions

We present the results of 3D simulations of indirect drive inertial confinement fusion capsules driven by the “high-foot” radiation pulse on the National Ignition Facility. The results are post-processed using a semi-deterministic ray tracing model to generate synthetic deuterium-tritium (DT) and deuterium-deuterium (DD) neutron spectra as well as primary and down scattered neutron images. Results with low-mode asymmetries are used to estimate the magnitude of anisotropy in the neutron spectra shift, width, and shape. Comparisons of primary and down scattered images highlight the lack of alignment between the neutron sources, scatter sites, and detector plane, which limits the ability to infer the ρr of the fuel from a down scattered ratio. Further calculations use high bandwidth multi-mode perturbations to induce multiple short scale length flows in the hotspot. The results indicate that the effect of fluid velocity is to produce a DT neutron spectrum with an apparently higher temperature than that inferred from the DD spectrum and which is also higher than the temperature implied by the DT to DD yield ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear analyses of peeling-ballooning modes in high beta pedestal plasmas

We present the linear simulations of edge plasma instabilities using the 3-field peeling-ballooning model and gyro-Landau-fluid model under the BOUT++ framework. A series of realistic equilibria of shifted circular geometry are generated by a global equilibrium solver CORSICA, where the Shafranov shift, elongation effects, and bootstrap current are included. The linear growth rate spectrum of the peeling-ballooning modes is shown in a wide range of pressure gradient and parallel current density in the pedestal region. The results show that the bootstrap current stabilizes high beta ballooning modes. Here, the simulations with different fractions of bootstrap current indicate a trend for the existence of the high beta peeling-ballooning mode stability region. Taking the kinetic effects into account, the linear simulations of kinetic peeling-ballooning mode using the gyro-Landau-fluid model show that this region can be accessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of excitation level on the optical properties of GaAs/AlGaO microdisks with an active region containing InAs quantum dots

The effect of the excitation level on the intensity and width of whispering-gallery-mode (WGM) lines in microdisks with an asymmetric air/GaAs/AlGaO waveguide and an active region containing InAs quantum dots is studied using microphotoluminescence spectroscopy. At high pump levels, overheating of the active region takes place, which leads to a long-wavelength shift of the gain spectrum; in addition, the shape of the spectrum changes due to the saturation of the ground and excited states and to many-particle interactions. As a consequence, the behavior of intensities and linewidths of WGMs as functions of the optical-pump power density is determined by the spectral positions of the modes with respect to the gain peaks and may differ considerably for different modes. The long-wavelength shift of WGM lines caused by active-region overheating is partially compensated by a short-wavelength shift, which occurs due to the dependence of the effective refractive index of the waveguide on the concentration of free charge carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Dimits Shift in More Realistic Gyrokinetic Plasma Turbulence Simulations

In simulations of turbulent plasma transport due to long wavelength, (k⊥pi ≤ 1), electrostatic drift-type instabilities we find that a nonlinear upshift of the effective threshold persists. This `Dimits shift' represents the difference between the linear threshold, at the onset of instability, and the nonlinear threshold, where transport increases suddenly as the driving temperature gradient is increased. As the drive increases, the magnitudes of turbulent eddies and zonal ows grow until the zonal flows become nonlinearly unstable to 'tertiary' modes and their sheared ows no longer grow fast enough to strongly limit eddy size. The tertiary mode threshold sets the effective nonlinear threshold for the heat transport, and the Dimits shift arises when this occurs at a zonal flow magnitude greater than that needed to limit transport near the linear threshold. Nextgeneration tokamaks will likely benefit from the higher effective threshold for turbulent transport, and transport models should incorporate suitable corrections to linear thresholds. These gyrokinetic simulations are more realistic than previous reports of a Dimits shift because they include nonadiabatic electron dynamics, strong collisional damping of zonal flows, and finite electron and ion collisionality together with realistic shaped magnetic geometry. Reversing previously reported results based on idealized adiabatic electrons, we find that increasing collisionality reduces the heat flux because collisionality reduces the nonadiabatic electron drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Saturation Velocity Measurement of Al 0.7 Ga 0.3 N-Channel High Electron Mobility Transistors

Gate length dependent (80 nm–5000 mm) radio frequency measurements to extract saturation velocity are reported for Al 0.85 Ga 0.15 N/Al 0.7 Ga 0.3 N high electron mobility transistors fabricated into radio frequency devices using electron beam lithography. Direct current characterization revealed the threshold voltage shifting positively with increasing gate length, with devices changing from depletion mode to enhancement mode when the gate length was greater than or equal to 450 nm. Transconductance varied from 10 mS/mm to 25 mS/mm, with the 450 nm device having the highest values. Maximum drain current density was 268 mA/mm at 10 V gate bias. Scattering-parameter characterization revealed a maximum unity gain bandwidth ($f_T$) of 28 GHz, achieved by the 80 nm gate length device. A saturation velocity value of 3.8 × 10 6 cm/s, or 35% of the maximum saturation velocity reported for GaN, was extracted from the $f_T$ measurements

36 MATERIALS SCIENCE↗

A metastable tetragonal phase in two-dimensional halide perovskite lattices driven by a coherent Higgs mode

The optoelectronic properties of metal halide perovskites are defined by their coupled structural and photophysical properties, yet their lattice behaviour remains underexplored. Here, using impulsive stimulated Raman spectroscopy, we study light-induced phonon dynamics of two-dimensional butylammonium lead iodide ((BA) 2 PbI 4 ) films under varying excitation intensities, photon energies and temperatures. We reveal that, whereas (BA) 2 PbI 4 exhibits two thermally accessible orthorhombic phases, optically excited phonons transiently direct the lattice to a distinct, higher symmetry tetragonal phase. We show that bandgap oscillations arise from simultaneous distortions of in-plane and out-of-plane octahedral tilt angles with oscillations following a low-to-high symmetry pathway, marked by two vibrational frequencies independent of intensity—a signature of an optically excited Higgs mode. Notably, the Higgs mode at below-bandgap excitation induces a fourfold larger spectral shift than above-bandgap, where photogenerated charge carriers drive the system away from the optically induced tetragonal phase. This study illustrates how optomechanical coupling influences the optical properties of two-dimensional perovskites.

36 MATERIALS SCIENCE↗

Development of Enhancement Mode AlN/GaN HEMTs

Demonstration of enhancement mode AlN/GaN high electron mobility transistor (HEMT) using oxygen plasma treatment on the gate area prior to the gate metalliation deposition was achieved. Starting with a depletion mode AlN/GaN HEMT, the threshold voltage of the HEMT could be shifted from 3.2 to 1V depending on the oxygen plasma treatment time to convert the AlN into Al oxide. The gate current was also reduced when the threshold voltage

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman Spectroscopy Characterization of Se- Doped Bi{sub 12}SiO{sub 20} Crystals

Crystals of BSO doped with Se are successfully grown by the Czochralski method. The measured concentration of Se is 1.75x10{sup 18} cm{sup -3} and of Fe is 6.4x10{sup 18} cm{sup -3}, i.e. the concentration of Fe is significantly increased. It is assumed that the doping takes place through the replacement 3Si{sup 4+}->(Se{sup 6+}+2Fe{sup 3+}). The doping-induced shift of the Raman-active A, E and F-modes is not significant and it is concluded that the lattice distortions caused by doping are very small in BSO crystals doped with Se at low concentrations. The doping with Se at high concentration leads to occasional second phase inclusions. It is observed that all A, E and F- modes in the Raman spectrum are downshifted with 2-5 cm{sup -1}. It is concluded that the doping with Se at high concentrations follows the same mechanism as those with low concentrations but the introduced lattice distortions are more significant.

36 MATERIALS SCIENCE↗

The internal disruption as hard Magnetohydrodynamic limit of 1/2 sawtooth like activity in large helical device

Large helical device (LHD) inward-shifted configurations are unstable to resistive MHD pressure-gradient-driven modes. Sawtooth like activity was observed during LHD operation. The main drivers are the unstable modes 1/2 and 1/3 in the middle and inner plasma region which limit the plasma confinement efficiency of LHD advanced operation scenarios. The aim of the present research is to study the hard MHD limit of 1/2 sawtooth like activity, not observed yet in LHD operation, and to predict its effects on the device performance. Previous investigations pointed out this system relaxation can be an internal disruption [J. Varela et al., 'Internal disruptions and sawtooth like activity in LHD,' 38th EPS Conference on Plasma Physics (2011), P5.077]. In the present work, we simulate an internal disruption; we study the equilibria properties before and after the disruptive process, its effects on the plasma confinement efficiency during each disruptive phase, the relation between the n/m = 1/2 hard MHD events and the soft MHD events, and how to avoid or reduce their adverse effects. The simulation conclusions point out that the large stochastic region in the middle plasma strongly deforms and tears the flux surfaces when the pressure gradient increases above the hard MHD limit. If the instability reaches the inner plasma, the iota profiles will be perturbed near the plasma core and three magnetic islands can appear near the magnetic axis. If the instability is strong enough to link the stochastic regions in the middle plasma (around the half minor radius {rho}) and the plasma core ({rho}<0.25), an internal disruption is driven.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cavity optomechanics with a nonlinear photonic-crystal nanomembrane

We have designed, fabricated and characterized a nanomembrane which could be used as a moving end mirror of a Fabry-Perot cavity. The high reflectivity and optimized mechanical properties of the membrane should allow us to demonstrate the mechanical ground state of the membrane. As any sub-micron mechanical resonator, our system demonstrates nonlinear dynamical effects. We characterize the mechanical response to a strong pump drive and observe a shift in the oscillation frequency and phase conjugation of the mechanical mode. Such nonlinear effects are expected to play a role in the quantum dynamics of the membrane as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of scrape-off-layer current on reconstructed tokamak equilibrium

Methods are described that extend fields from reconstructed equilibria to include scrape-off-layer current through extrapolated parametrized and experimental fits. The extrapolation includes both the effects of the toroidal-field and pressure gradients which produce scrape-off-layer current after recomputation of the Grad-Shafranov solution. To quantify the degree that inclusion of scrape-off-layer current modifies the equilibrium, the χ-squared goodness-of-fit parameter is calculated for cases with and without scrape-off-layer current. The change in χ-squared is found to be minor when scrape-off-layer current is included however flux surfaces are shifted by up to 3 cm. Here the impact on edge modes of these scrape-off-layer modifications is also found to be small and the importance of these methods to nonlinear computation is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum nondemolition photon detection in circuit QED and the quantum Zeno effect

We analyze the detection of itinerant photons using a quantum nondemolition measurement. An important example is the dispersive detection of microwave photons in circuit quantum electrodynamics, which can be realized via the nonlinear interaction between photons inside a superconducting transmission line resonator. We show that the back action due to the continuous measurement imposes a limit on the detector efficiency in such a scheme. We illustrate this using a setup where signal photons have to enter a cavity in order to be detected dispersively. In this approach, the measurement signal is the phase shift imparted to an intense beam passing through a second cavity mode. The restrictions on the fidelity are a consequence of the quantum Zeno effect, and we discuss both analytical results and quantum trajectory simulations of the measurement process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of Intense Low-Divergence Isolated Soft-X-Ray Attosecond Pulses in a Gas-Filled Waveguide Using Three-Color Synthesized Laser Pulses

Isolated attosecond pulses (IAPs) in the soft-x-ray (SXR) region have been successfully produced via high-order harmonic generation in a gas medium at several laboratories, but pulse energies are much lower compared to the IAPs in the extreme ultraviolet. Here, we show that in a gas-filled hollow waveguide, an efficient gating method using a few-cycle three-color synthesizer is able to generate stronger SXR IAPs. We show that an 104-as IAP in the SXR region (central energy of 210 eV) with a higher pulse energy (0.9 nJ) and a lower divergence (within 1.5 mrad) can be generated with a three-color laser beam for input pulse energy at 0.62 mJ, under the condition of optimal gas pressure and waveguide length. The enhancement of the IAP is attributed to favorable phase matching of SXR high harmonics caused by the evolution of the three-color waveform during its propagation in the waveguide, which can be understood by analyzing the time shift of the waveform due to the interplay of the waveguide mode, atomic dispersion, and plasma dispersion. We check that the gating method is quite robust with respect to the phase jitter in the waveform. The advantage of this method is further demonstrated by comparing the generation of SXR high harmonics and attosecond pulses with two other schemes: the three-color waveform in a gas cell and a previously optimized two-color waveform in a gas-filled waveguide.

74 ATOMIC AND MOLECULAR PHYSICS↗

Physically motivated analytical expression for the temperature dependence of the zero-field splitting of the nitrogen-vacancy center in diamond

The temperature dependence of the zero-field splitting (ZFS) between the | $m_s$ = 0 $\rangle$ and | $m_s$ = ±1 $\rangle$ levels of the nitrogen-vacancy (NV) center's electronic ground-state spin triplet can be used as a robust nanoscale thermometer in a broad range of environments. However, despite numerous measurements of this dependence in different temperature ranges, to our knowledge no analytical expression has been put forward that captures the scaling of the ZFS of the NV center across all relevant temperatures. Here we present a simple, analytical, and physically motivated expression for the temperature dependence of the NV center's ZFS that matches all experimental observations, in which the ZFS shifts in proportion to the occupation numbers of two representative phonon modes. In contrast to prior models our expression does not diverge outside the regions of fitting. In conclusion, we show that our model quantitatively matches experimental measurements of the ZFS from 15 to 500 K in single NV centers in ultrapure bulk diamond, and we compare our model and measurements to prior models and experimental data.

36 MATERIALS SCIENCE↗

Transition to collapsed tetragonal phase in CaFe 2 As 2 single crystals as seen by 57 Fe Mössbauer spectroscopy

Temperature dependent measurements of 57 Fe Mössbauer spectra on CaFe 2 As 2 single crystals in the tetragonal and collapsed tetragonal phases are reported. Clear features in the temperature dependencies of the isomer shift, relative spectra area, and quadrupole splitting are observed at the transition from the tetragonal to the collapsed tetragonal phase. From the temperature dependent isomer shift and spectral area data, an average stiffening of the phonon modes in the collapsed tetragonal phase is inferred. The quadrupole splitting increases by ~25% on cooling from room temperature to ~100 K in the tetragonal phase and is only weakly temperature dependent at low temperatures in the collapsed tetragonal phase, in agreement with the anisotropic thermal expansion in this material. In order to gain microscopic insight about these measurements, we perform ab initio density functional theory calculations of the electric field gradient and the electron density of CaFe 2 As 2 in both phases. By comparing the experimental data with the calculations we are able to fully characterize the crystal structure of the samples in the collapsed-tetragonal phase through determination of the As z coordinate. Furthermore, based on the obtained temperature dependent structural data we are able to propose charge saturation of the Fe-As bond region as the mechanism behind the stabilization of the collapsed-tetragonal phase at ambient pressure.

36 MATERIALS SCIENCE↗