Results for “multi objective” — Page 37

NASA NTRSDate not supplied

Gust Load Alleviation Control and Gust Estimation for a High Aspect Ratio Wing Wind Tunnel Model

This paper presents the gust load alleviation (GLA) study of the aspect ratio 13.5 Common Research Model (CRM) wind-tunnel model. This study details the design of the GLA controller in preparation for wind-tunnel testing in the Transonic Dynamics Tunnel at NASA Langley Research Center. An aeroservolastic (ASE) model was first reduced using a model reduction method that takes advantage of the sinusoidal steady-state response. Then, the reduced model was used to design an extended-state Kalman filter which estimates the states and the sinusoidal gust input. The GLA control was then derived using the optimal control solution to a multi-objective cost function. The results of the GLA controller indicate a 75.6% reduction in wing-root strain while maintaining robust stability margins. The final paper will include performance under sub-optimal conditions, e.g., sensor noise, uncertainty in gust frequency, etc..

Christopher Forte↗

NASA NTRS2022

CLEAR: Boosted Lyα Transmission of the Intergalactic Medium in UV-bright Galaxies

Reionization is an inhomogeneous process, thought to begin in small ionized bubbles of the intergalactic medium (IGM) around overdense regions of galaxies. Recent Lyα studies during the epoch of reionization show evidence that ionized bubbles formed earlier around brighter galaxies, suggesting higher IGM transmission of Lyα from these galaxies. We investigate this problem using IR slitless spectroscopy from the Hubble Space Telescope (HST) Wide-Field Camera 3 (WFC3) G102 grism observations of 148 galaxies selected via photometric redshifts at 6.0 < z < 8.2. These galaxies have spectra extracted from the CANDELS Lyα Emission at Reionization (CLEAR) survey. We combine the CLEAR data for 275 galaxies with the Keck Deep Imaging Multi-Object Spectrograph and MOSFIRE data set from the Texas Spectroscopic Search for Lyα Emission at the End of Reionization Survey. We constrain the Lyα equivalent width (EW) distribution at 6.0 < z < 8.2, which is described by an exponential form, dN / dEW ∝ exp(-EW) W(sub 0), with the characteristic e-folding scale width (W(sub 0)). We confirm a significant drop in the Lyα strength (i.e., W(sub 0)) at z > 6. Furthermore, we compare the redshift evolution of W(sub 0) between galaxies at different UV luminosities. UV-bright (M(sub UV) < −21 [i.e., L(sub UV) > L*]) galaxies show weaker evolution with a decrease of 0.4 ( ± 0.2) dex in W(sub 0) at z > 6, while UV-faint (M(sub UV) > −21 [LUV < L*]) galaxies exhibit a significant drop of 0.7–0.8 (±0.2) dex in W(sub 0) from z < 6 to z > 6. If the change in W(sub 0) is proportional to the change in the IGM transmission for Lyα photons, then this is evidence that the transmission is “boosted” around UV-brighter galaxies, suggesting that reionization proceeds faster in regions around such galaxies.

Reionization↗

NASA NTRSDate not supplied

Gust Load Alleviation Control and Gust Estimation for a High Aspect Ratio Wing Wind Tunnel Model

This paper presents the gust load alleviation (GLA) study of the aspect ratio 13.5 Common Research Model (CRM) wind-tunnel model. This study details the design of the GLA controller in preparation for wind-tunnel testing in the Transonic Dynamics Tunnel at NASA Langley Research Center. An aeroservolastic (ASE) model is first reduced using a model reduction method that takes advantage of the sinusoidal steady-state response. Then, the reduced model is used to design an extended-state Kalman filter which estimates the states and the sinusoidal gust input. The GLA control is then derived using the optimal control solution to a multi-objective cost function. The results of the GLA controller indicate a 69.07% reduction in wing-root strain without sensor noise and 68.45% reduction with sensor noise, while maintaining robust stability margins. An adaptive GLA controller is developed for uncertain gust frequency and shows a 71.03% reduction in wing root strain compared to the non-adaptive control reduction of just 39.19%.

Christopher Forte↗

NASA NTRSDate not supplied

The Viability of See and Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗

NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for UAM

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗

NASA NTRSDate not supplied

Parametric Mechanism Design Through Numerical Optimization and Physics Simulation

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This work presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation. The toolchain enables multi-objective optimization, generates parametric CAD files that can be further post-processed by an end user, and can be expanded to optimize full systems and non-mechanical parameters such as feedback control variables. We demonstrate the toolchain through an independently verifiable design problem that optimizes wheel radius to achieve a desired linear velocity in a rigid-body physics environment when the wheel rotates at a constant angular speed, and then post-process the parametric CAD file of the optimal design generated by the tool before ultimately manufacturing it via 3D printing. We end with a discussion of how the toolchain can incorporate other analysis tools, including finite element analysis, computational fluid dynamics, and granular media simulations.

Optimization↗

NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for Urban Air Mobility (UAM)

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗

NASA NTRSDate not supplied

An Optimization-Based Toolchain for Parametric Mechanism Design

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This work presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation. The toolchain enables multi-objective optimization, generates parametric CAD files that can be further post-processed by an end user, and can be expanded to optimize full systems and non-mechanical parameters such as feedback control variables. We demonstrate the toolchain through an independently verifiable design problem that optimizes wheel radius to achieve a desired linear velocity in a rigid-body physics environment when the wheel rotates at a constant angular speed, and then post-process the parametric CAD file of the optimal design generated by the tool before ultimately manufacturing it via 3D printing. We end with a discussion of how the toolchain can incorporate other analysis tools, including finite element analysis, computational fluid dynamics, and granular media simulations.

Optimization↗

NASA NTRS2023

The Viability of See-and-Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗

NASA NTRSDate not supplied

Framework for National Airspace System (NAS) Level Sustainability Assessment of New Aircraft

This paper introduces a framework for investigating the future sustainability benefits of conceptual vehicles. The framework considers the complex interactions between such vehicles and how it can be flown in the National Airspace System. Aggregate benefits for reduction in fuel use and emissions need to consider fleet wide operations, demand distributions, NAS Infrastructure, and differing business models. To extract true system level benefits multi-objective function optimization for operational energy use, acoustics, emissions and NAS Wide efficiency and interoperability incorporating physic-based system-wide flight simulations in the National Airspace system is required. The framework marries traditional vehicle synthesis processes with a NAS Simulation environment to simulate how a new synthesized vehicle will behave in the NAS.

Sustainability↗

NASA NTRS2024

Stress Control of Multilayer Suspended MEMS Structures In High Contrast Microshutters

The microshutter array (MSA) is a programmable field mask (Fig. 1) that enables large-format multi-object spectroscopy at extremely high contrast ratios of over 105 in space [1]. Assessment of the first generation MSAs used on the James Webb Space Telescope (JWST) revealed light leakage and stuck shutters due to warping (Fig. 2) [2]. Such leakage is partially reduced with appropriate light shields and mitigation strategies. Anticipation of stricter performance requirements for the upcoming Habitable Worlds Observatory Flagship [3] motivates the study. In this paper, we present the systematic study of film stress effects using finite element modeling (FEM) and analysis of newly fabricated MSAs. We present structural designs to mitigate stress effects and improve flatness of suspended structures in micro-electromechanical systems (MEMS). Our study aims to provide a comprehensive view of film-to-film interaction, mechanical, and structural considerations in design and process definition that goes beyond NGMSA devices. The presented findings can be of value to the stress and morphology control in any suspended MEMS membranes.

Microshutters↗

NASA NTRS2024

Microgravity Flow Boiling Experiments With Liquid-Vapor Mixture Inlet Onboard the International Space Station

This article is part of a series of studies culminating from the multi-objective Flow Boiling and Condensation Experiment (FBCE) onboard the International Space Station, which utilized the Flow Boiling Module (FBM) for experiments between February and July 2022. This study investigates microgravity flow boiling of n-Perfluorohexane with liquid-vapor mixture (two-phase) inlet conditions to the FBM with either one or two opposite walls heated. The FBM’s channel has a rectangular cross-sectional area of 5.0 × 2.5 mm 2 and a heated length of 114.6 mm. Key parameters of interest include mass velocity (180 – 2400 kg/m 2 s), inlet quality (-0.01 – 0.87), inlet pressure (120 – 200 kPa), and heat flux (1.8 W/cm 2 to critical heat flux), and a large database is amassed. The flow is visualized via a high-speed video camera and photographs are recorded at each heating increment to assess the periodic flow patterns within the channel and the near-wall interfacial behavior. Flow patterns are complex and mainly characterized by high- and low-density fronts alternately traversing the channel to yield high- and low-density-dominant periods of boiling. At all operating conditions, high-density fronts are faster during high-density-dominant periods. At low inlet qualities, the flow is annular near the channel inlet with a central vapor core surrounded by an annular liquid layer. Each high-density front having a high liquid fraction leaves a thin liquid layer sheared onto the heated walls. Boiling occurs within the liquid layer and a vapor layer is formed next to the heated wall. Inlet quality and mass velocity most dictate the overall flow patterns followed by heating configuration, and to a much lesser extent, heat flux and inlet pressure. Heat transfer characteristics are assessed via averaged boiling curves, streamwise profiles of wall temperature and heat transfer coefficient, and parametric curves of local and averaged heat transfer coefficients. Inlet pressure has an insignificant effect on heat transfer. At similar operating conditions, both the heating configurations yield similar trends and values of heat transfer coefficient and critical heat flux (CHF, slightly higher for single-sided) even though double-sided heating adds twice the heat to the fluid and doubly raises local quality. The heat fluxes required for both onset of nucleate boiling degradation and CHF are larger at high mass velocities and low inlet qualities. For a fixed inlet quality, high mass velocities yield higher average heat transfer coefficients at both lower and higher heat fluxes, while the nucleate boiling regime at intermediate heat fluxes is unaffected. For a fixed mass velocity, higher inlet qualities yield higher and lower average heat transfer coefficients at lower and higher heat fluxes, respectively.

Microgravity↗

NASA NTRSDate not supplied

The Inspectability Metric: A Formalized System Of Measurement Enabling The Design For Inspection Framework

Nondestructive evaluation (NDE) engineers are often confronted with structural design choices that present challenges to meeting inspection requirements. These challenges, at best, increase the resources needed to design an inspection solution and, at worst, require resource intensive redesign of the structure. If the inspectability of the structure can be determined early in the design cycle, these challenging inspection scenarios can be avoided. The emergence of additive manufacturing has further compounded this problem by enabling the creation of highly optimized structures with no regard to inspection constraints. Design for inspection (DFI) offers a framework to integrate nondestructive evaluation (NDE) into the design process to alleviate the mechanisms that produce uninspectable designs. DFI is the concept of including inspectability in a multi-objective optimization framework so that it can be considered in parallel to other metrics such as mass and manufacturability. This allows rapid evaluation of the trade-off between design metrics to find solutions that meet the inspection needs of a particular material system, structural concept, or vehicle program. To enable DFI, there must be a system by which the inspectability of a structure can be measured. This system must be agile to produce results quickly, it must be versatile to work with the type of incomplete information one would encounter early in the design process (such as lack of inspection requirements), and it must be delivered in a form that is easily understood by designers. To meet this need, this presentation introduces the novel inspectability metric as a system to measure inspectability. The inspectability metric is a standardized, automation friendly procedure that uses simulations to determine inspectability. Along with guidelines to properly process designs and integrate with existing workflows, the inspectability metric provides a suite of simulation tests to interrogate the ability to find defects and the sensitivity to variability. The testing rubric is designed to maximize the coverage of the parameter space while minimizing the number of simulations needed. The inspectability metric has been in development in collaboration with industry partners to ensure compatibility with modern simulation tools and aerospace design workflows. In this study, we will demonstrate how the inspectability metric is able to determine the inspectability of multiple types of structures, including aerospace composites and additively manufactured parts. We will then show how the inspectability score can be plugged into existing design optimization tasks, such as structural sizing algorithms or design for manufacturing (DFM) frameworks.

Design for inspection↗

NASA NTRS2024

Optimization of Mission Enabling Broadband Lyman Ultraviolet Series to Infrared Aluminum Lithium Fluoride Reflectors

The Habitable Worlds Observatory (HWO) concept NASA flagship mission aims extend the ultraviolet (UV) observation range and sensitivity capabilities of the Hubble Space Telescope (HST) with respective goals of reaching photons down to 100 nm and containing an ultraviolet multi-object spectrograph with sensitivity improved 30-100 times. Adding the sensitivity capabilities near the Lyman series spectral range of ~100-121.6 nm reduces the reliance of redshift for key diagnostic ion lines such as O VI (103.2 nm), and heavily ionized gases of Ne VIII (77.5 nm) and MgX (62.5 nm). Clean and unoxidized aluminum (Al) reflectors provide optimal efficiency over a broadband down to the extreme ultraviolet (EUV) wavelength of ~83 nm. To prevent oxidation and maintain high spectral efficiency down to ~100 nm, the Al reflector is conventionally overcoated with a thin lithium fluoride (LiF) layer. We investigate the optimization of the deposition of the Al+LiF coating material composition to attain high spectral efficiency broadband reflectors down to 100 nm and enable the scientific goals of HWO. Lithium hexafluoroaluminate (Li3AlF6) is investigated as a different composition form of LiF to overcoat Al. The spectral efficiency and durability of the reflectors is evaluated. We will demonstrate the use of Li3AlF6 as an overcoat to protect aluminum yields ultra-high efficiency at the Hydrogen Lyman-alpha (HLyα, 121.6 nm) line with experimental reflectance values peaking up to 99%.

optical coatings↗

NASA NTRS2024

Optimization of Mission Enabling Broadband Lyman Ultraviolet Series to Infrared Aluminum Lithium Fluoride Reflectors

The Habitable Worlds Observatory (HWO) concept NASA flagship mission aims extend the ultraviolet (UV) observation range and sensitivity capabilities of the Hubble Space Telescope (HST) with respective goals of reaching photons down to 100 nm and containing an ultraviolet multi-object spectrograph with sensitivity improved 30-100 times. Adding the sensitivity capabilities near the Lyman series spectral range of ~100-121.6 nm reduces the reliance of redshift for key diagnostic ion lines such as O VI (103.2 nm), and heavily ionized gases of Ne VIII (77.5 nm) and MgX (62.5 nm). Clean and unoxidized aluminum (Al) reflectors provide optimal efficiency over a broadband down to the extreme ultraviolet (EUV) wavelength of ~83 nm. To prevent oxidation and maintain high spectral efficiency down to ~100 nm, the Al reflector is conventionally overcoated with a thin lithium fluoride (LiF) layer. We investigate the optimization of the deposition of the Al+LiF coating material composition to attain high spectral efficiency broadband reflectors down to 100 nm and enable the scientific goals of HWO. Lithium hexafluoroaluminate (Li3AlF6) is investigated as a different composition form of LiF to overcoat Al. The spectral efficiency and durability of the reflectors is evaluated. We will demonstrate the use of Li3AlF6 as an overcoat to protect aluminum yields ultra-high efficiency at the Hydrogen Lyman-alpha (HLyα, 121.6 nm) line with experimental reflectance values peaking up to 99%.

optical coatings↗

DOE OSTI2020

Conjugate Heat Transfer Analysis of the Supercritical CO2 Based Counter Flow Compact 3D Heat Exchangers

Compact heat exchangers using supercritical fluids such as CO2 are preferred due to their high heat transfer capacity and smaller footprint. Three-dimensional conjugate forced convection heat transfer analysis was performed on several shell-and-tube counter-flow microchannel heat exchangers. Numerical simulations were conducted to test effect of change in mass flow rate, hydraulic diameter and various cross sections on the heat transfer. Increasing mass flow rate improved heat transfer up to a maximum value and then decreased downstream with increasing turbulence. Maximum heat transfer was obtained for the micro channel with the smallest hydraulic diameter. Amongst the cross sections analyzed (circular, square, circular with radial ribs, and square with radial ribs), the most uniform distribution of temperature and maximum heat transfer were obtained for circular cross section with radial ribs. An optimally efficient operation of such a heat exchanger can be attained by considering these factors during multi-objective constrained optimization of geometric parameters and requirements for additive manufacturing of such compact heat exchangers.

Chitale, Janhavi↗

DOE OSTI2021

Optimization of Refrigerant Compositions for Low-GWP Refrigerant Mixtures Using Segment-by-segment Heat Exchanger and Detailed System Models

The recently introduced hydrofluoroolefin (HFO) refrigerants, including R1234yf and R1234ze(E), have significantly lower global warming potentials (GWPs) than traditional hydrofluorocarbon (HFC) refrigerants like R410A. However, prior tests show that direct drop-in of pure R1234yf or R1234ze(E) into equipment designed for R410A results in a decrease in heat exchanger capacity and the system coefficient of performance. The primary reason is the lower in-tube heat transfer performance of R1234yf and R1234ze(E) compared with that of R410A. To address this issue, previous studies have mixed the mildly flammable HFC R32 with HFOs to improve system performance, with HFC R125 also added to suppress flammability. Previous studies selected compositions based on simple cycle analyses and did not consider modifications of the heat exchanger circuitry configuration to adapt to the new refrigerants. This study presents a novel multi-objective optimization approach to design a refrigerant composition that maximizes energy efficiency within flammability and GWP limits. The approach in this work simultaneously optimizes mixture composition and heat exchanger circuitry configuration. A case study on a rooftop unit indicates that, compared with mixture-only optimization, simultaneous optimization of mixture and heat exchanger circuitry yields a 5.9% improvement in cycle efficiency and a 48.6% reduction in refrigerant flammability with a GWP of 268. Circuitry optimization using refrigerants with different temperature glides shows that the larger the temperature glide is, the larger EER improvement is obtained. The results show that zeotropic blends with a large temperature glide are more sensitive to the refrigerant circuitry than pure refrigerants and may suffer significant performance degradation with subpar heat exchanger circuitry design. The proposed optimization approach is generally applicable to mixtures with any number of components. Using this approach to design a HVAC system can yield higher system efficiency within flammability and GWP constraints.

Li, Zhenning↗

DOE OSTI2021

Domain knowledge-informed, process-mapping AI graph for designing Fe-based alloys

<span style="font-family: Calibri, sans-serif; font-size: 12pt;">Continuous improvement in efficiency of a power plant relies on designing materials for use at increasingly higher temperature and/or pressure, for 100,000s hours of operation. Due to complexity, non-linearity and high-dimensionality of the problem, traditional Machine Learning (ML) approaches require unreasonably large datasets for the data-driven model development. Science-based material and process engineering complements hard data with, sometimes soft and intuitive, empirical domain knowledge. Artificial Intelligence (AI) was used in this study to incorporate such knowledge into computational graph architecture (process-mimicking artificial neuron design, causal layer and graph structures, ensemble modeling of latent states) and learning procedures (variable transformation, fuzzy physics pre-training and freezing of deep layers, virtual microstructure representation, and adversarial multi-objective optimization). The first alloys design pathways suggested by the AI tool (pyroMind) passed a preliminary engineering review on soundness and transparency.</span>

Romanov, Vyacheslav↗