SEARCH · Search NASA

Results for “multifunctionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Epitaxial Thin Film Growth on Recycled SrTiO 3 Substrates Toward Sustainable Processing of Complex Oxides

Complex oxide thin films cover a range of physical properties and multifunctionalities that are critical for logic, memory, and optical devices. Typically, the high‐quality epitaxial growth of these complex oxide thin films requires single crystalline oxide substrates such as SrTiO 3 (STO), MgO, LaAlO 3 , a‐Al 2 O 3, and many others. Recent successes in transferring these complex oxides as free‐standing films not only offer great opportunities in integrating complex oxides on other devices, but also present enormous opportunities in recycling the deposited substrates after transfer for cost‐effective and sustainable processing of complex oxide thin films. In this work, the surface modification effects introduced on the recycled STO are investigated, and their impacts on the microstructure and properties of subsequently grown epitaxial oxide thin films are assessed and compared with those grown on the pristine substrates. Detailed analyses using high‐resolution scanning transmission electron microscopy and geometric phase analysis demonstrate distinct strain states on the surfaces of the recycled STO versus the pristine substrates, suggesting a pre‐strain state in the recycled STO substrates due to the previous deposition layer. These findings offer opportunities in growing highly mismatched oxide films on the recycled STO substrates with enhanced physical properties. Specifically, yttrium iron garnet (Y 3 Fe 5 O 12 ) films grown on recycled STO present different ferromagnetic responses compared to that on the pristine substrates, underscoring the effects of surface modification. The study demonstrates the feasibility of reuse and redeposition using recycled substrates. Via careful handling and preparation, high‐quality epitaxial thin films can be grown on recycled substrates with comparable or even better structural and physical properties toward sustainable process of complex oxide devices.

pre-strained STO surfaces↗

DOE OSTI2022

Mesocrystalline Ordering and Phase Transformation of Iron Oxide Biominerals in the Ultrahard Teeth of Cryptochiton stelleri

Biological organisms naturally synthesize complex, hierarchical, multifunctional materials through mineralization processes at ambient conditions and under physiological pH. One such example is the ultrahard and wear-resistant radular teeth found in mollusks, which are used to scape against the rock to feed on algae. Herein, the biologically controlled structural development of the hard, outer magnetite-containing shell of the chitin teeth is revealed. Specifically, the formation of a series of mesocrystalline iron oxide phases, templated by chitin-binding proteins, is identified. The initial domains, consisting of ferrihydrite mesocrystals with a spherulite-like morphology, undergo a solid-state phase transformation to form magnetite while maintaining mesocrystallinity, likely via a shear-induced solid-state reaction, without any noticeable architectural changes. Subsequent growth via Ostwald ripening leads to nearly single-crystalline rod-like elements. In addition, an interpenetrating organic matrix is identified that, at early stages of tooth development, potentially contains iron-binding proteins that guide the self-assembly of the mesocrystalline mineral and influence the preferred orientation of the later-formed magnetite nanorods, which ultimately determines the mechanical behavior of the mature chiton teeth.

36 MATERIALS SCIENCE↗

DOE OSTI2026

A New Platform for Twistronics: Perovskite Moiré Superlattices Beyond van der Waals

Moiré superlattices have reshaped condensed‐matter physics by enabling twist‐angle engineering of electronic and excitonic states, traditionally in van der Waals (vdW) systems. This Perspective focuses on perovskites as a transformative non‐van der Waals (non‐vdW) platform for twistronics. These materials are distinguished by ionic‐covalent bonding and soft octahedral lattices that support deep moiré potentials (≈100–200 meV), which in turn yield bright, room‐temperature excitons and tunable quantum phenomena. We organize recent advances into two core classes: (i) moiré superlattices constructed from 2D Ruddlesden‐Popper (RP) perovskites via spontaneous or guided twisted stacking; and (ii) moiré architectures in 3D perovskite lamellae, achieved through topotactic 2D RP‐to‐3D conversion and ligand‐induced self‐assembly. Key experimental observations in these systems include twist‐tunable moiré periods, suppressed exciton–exciton annihilation, flat band‐like transport, and ferroelectric vortex lattices in their oxide perovskite counterparts. Here, we outline key bottlenecks, including defects arising during phase conversion, stringent lattice‐matching requirements, and the absence of in situ twist metrology, and highlight opportunities in lattice‐mismatched heterostructures and multifunctional quantum‐optoelectronic devices. Collectively, these advances establish perovskite moiré systems as a critical bridge between fundamental moiré physics and room‐temperature technological applications.

2D Ruddlesden–Popper perovskites↗

DOE OSTI2026

Backbone Stiffness‐Dependent Photoluminescence of Pendant Fluorophores in Organic Nanoparticles

Fluorescent organic nanoparticles (FoNPs) with backbone stiffness‐dependent photoluminescence were synthesized via microemulsion atom transfer radical polymerization (ATRP) of 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BiBEM), ethylene glycol dimethacrylate (EGDMA), and methacrylate monomers bearing pendant fluorophores, 1‐pyrenemethyl methacrylate (PyMMA), or 4‐(1,2,2‐triphenylethenyl)benzenemethyl methacrylate (TPEMMA). The crosslinking density precisely tuned the intraparticle rigidity, enabling systematic control over emission mechanisms. Pyrene‐containing FoNPs exhibited a rigidity‐dependent transition from excimer‐dominated to monomer‐dominated fluorescence, whereas TPE‐based FoNPs displayed aggregation‐induced emission (AIE) enhancement as intramolecular motion was restricted. Solvent‐dependent studies revealed that increased polarity and viscosity, particularly in benzyl alcohol and DMSO, promoted cooperative rigidification and enhanced emission intensity through specific polymer–solvent interactions. Furthermore, the retained alkyl bromide chain ends on FoNPs enabled dual roles as initiators and crosslinkers in UV‐induced polymerization of poly(ethylene glycol) acrylates, forming luminescent FoNP–OEG hybrid gels with improved mechanical robustness. This work establishes a versatile platform for integrating tunable optical and mechanical properties into a single polymeric nanoparticle framework, offering new design principles for multifunctional soft materials and providing a platform for future sensing, imaging, and photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Improved Sensitivity Relations in State Constrained Optimal Control

Sensitivity relations in optimal control provide an interpretation of the costate trajectory and the Hamiltonian, evaluated along an optimal trajectory, in terms of gradients of the value function. While sensitivity relations are a straightforward consequence of standard transversality conditions for state constraint free optimal control problems formulated in terms of control-dependent differential equations with smooth data, their verification for problems with either pathwise state constraints, nonsmooth data, or for problems where the dynamic constraint takes the form of a differential inclusion, requires careful analysis. In this paper we establish validity of both ‘full’ and ‘partial’ sensitivity relations for an adjoint state of the maximum principle, for optimal control problems with pathwise state constraints, where the underlying control system is described by a differential inclusion. The partial sensitivity relation interprets the costate in terms of partial Clarke subgradients of the value function with respect to the state variable, while the full sensitivity relation interprets the couple, comprising the costate and Hamiltonian, as the Clarke subgradient of the value function with respect to both time and state variables. These relations are distinct because, for nonsmooth data, the partial Clarke subdifferential does not coincide with the projection of the (full) Clarke subdifferential on the relevant coordinate space. We show for the first time (even for problems without state constraints) that a costate trajectory can be chosen to satisfy the partial and full sensitivity relations simultaneously. The partial sensitivity relation in this paper is new for state constraint problems, while the full sensitivity relation improves on earlier results in the literature (for optimal control problems formulated in terms of Lipschitz continuous multifunctions), because a less restrictive inward pointing hypothesis is invoked in the proof, and because it is validated for a stronger set of necessary conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2018

A revisit to atomic layer deposition of zinc oxide using diethylzinc and water as precursors

Nanophase zinc oxide (ZnO) has been widely studied as an important multifunctional material in many applications. Atomic layer deposition (ALD) is a unique thin-film synthesis technique, featuring its extreme uniformity, unrivaled conformal coverage, low deposition temperature, and precise controllability. Using diethylzinc (DEZ) and water as precursors, ALD has been reported previously for growing nanophase ZnO thin films. However, the growth characteristics and the resultant ZnO crystallinity have not been well characterized and understood. To this end, we revisited the ALD process of ZnO using DEZ and water. Through employing a suite of advanced characterization techniques, we systematically addressed the growth characteristics, morphological changes, and the crystallinity evolution of ZnO along with growth temperature in the range of 30-250 °C. The growth characteristics of the ALD ZnO films were investigated using in situ quartz crystal microbalance (QCM), scanning electron microscopy, atomic force microscopy, and synchrotron-based X-ray reflectivity. The crystallinity of the ALD ZnO films was determined using synchrotron-based X-ray diffraction and high-resolution transmission electron microscopy. In addition, through further analyzing QCM data, we proposed the adsorption-limited surface reaction for ALD ZnO growth with the temperature-dependent number of -OH surface group reacting with one DEZ molecule. Furthermore, this study contributes to offer new and deep insights on the fundamental ALD process of ZnO.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Size, structure, and luminescence of Nd 2 Zr 2 O 7 nanoparticles by molten salt synthesis

Pyrochlore materials with novel properties are in demand with multifunctional applications such as optoelectronics, scintillator materials, and theranostics. Many reports have already indicated the importance of the synthesis technique for Nd 2 Zr 2 O 7 (NZO) nanoparticles (NPs); however, no explanation has been provided for the reason behind the nature of its phase selectivity. Here, we have explored the structural and optical properties of the NZO NPs synthesized by a molten salt synthesis method. We have synthesized size-tunable NZO NPs and correlated the particle size with their structural behavior and optical performance. All NZO NPs are stabilized in defect fluorite phase. Neutron diffraction provided insight on the behavior of oxygen in the presence of heavy atoms. We have collected bright amalgam of blue and green emission on UV irradiation due to the presence of oxygen vacancies from these NPs. We have carried out in situ XRD and Raman investigations to observe the temperature-induced phase transformation in a controlled argon environment. Interestingly, we have not observed phase change for the molten salt synthesized fluorite NZO NPs; however, we observed phase transformation from a precursor stage to pyrochlore phase by in situ XRD directly. Finally, these observations provide a new strategy to synthesize nanomaterials phase-selectively for a variety of applications in materials science.

36 MATERIALS SCIENCE↗

DOE OSTI2018

A Novel Bio-based Polyaspartic Acid Copolymer: Synthesis, Structure and Performance of Degradation

A novel bio-based polyaspartic acid copolymer, as a multifunctional polymer was fabricated via in-site melting polymerization method using L-aspartic acid, γ-aminobutyric acid, L-phenylalanine and L-alanine as raw materials. The synthetic conditions were studied in detail, and the structure and degradation assays of these copolymers were investigated by FT-IR, XRD, weight loss rate, pH values, intrinsic viscosity and SEM. According to the results, all of the copolymers were found to have similar structure and excellent degradability. Additionally, the optimized copolymer C7 [L-aspartic acid (0.45 mol), γ-aminobutyric acid (0.35 mol), L-phenylalanine (0.05 mol) and L-alanine (0.15 mol)] exhibited the highest weight loss rate among all the copolymers. The weight loss rates on the 28th day in aqueous medium, phosphate buffered saline solution, 5.0 wt% trypsin solution and soil culture medium reached up to 44.74 wt%, 99.75 wt%, 90.67 wt% and 83.58 wt%, respectively. And the appropriate introduction of bio-based amino acids could control the degradation of polyaspartic acid distinctly. All of these results indicated that the bio-based polyaspartic acid copolymer could be used for reference as a good understanding of description the degradation of other environmentally friendly bio-based polymers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2019

Preparation of Low-Density Microcellular Foams from Recycled PET Modified by Solid State Polymerization and Chain Extension

Recycled polyethylene-terephthalate (RPET) bottle regrinds were physically foamed after two types of industrially feasible molecular weight increasing processes. Intrinsic viscosity (IV) of initial waste (0.71 dL/g) increased both after reactive extrusion carried out using a multifunctional epoxy-based chain extender (0.74 dL/g) and after solid state polycondensation (SSP) (0.78 dL/g), while capillary rheometry revealed higher degree of branching in the chain extended PET material. Despite the relatively low IV values (below 0.80 dL/g), physical foaming, a mild and cost-efficient way, was successful in both cases, uniform microcellular foam structures with void fractions ranging between 75 and 83% were achieved. During the experiments morphology change in the materials was tracked by differential scanning calorimetry (DSC) besides recording IV values. The IV drop during foaming was between 0.03 and 0.10 depending on the pre-processing technology. Structure of foams produced from the two different modified RPET materials was compared with each other based on scanning electron microscopic imaging of cryogenic fracture surfaces. The average cell diameters were measured to be 213 and 360 µm in the case of chain extended and SSP-modified materials, respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Cardanol Functionalized Carboxylated Acrylonitrile Butadiene Rubber for Better Processability, Technical Properties and Biocompatibility

The present investigation deals with the latex stage functionalization of carboxylated acrylonitrile butadiene rubber (XNBR) by chemically grafting cardanol onto its backbone main chain to impart multifunctional characteristics to it. The grafting of cardanol onto XNBR in the latex stage has been accomplished successfully using benzoyl peroxide (BPO) as a free radical initiator. Cardanol grafted XNBR (C-g-XNBR) exhibited an increase in molecular weight (7.5%) with an increase in PDI (polydispersity index). The optimum grafting parameters were found to be of 1 phr BPO with 15 phr cardanol at a reaction temperature of 80 °C and a reaction time of 10 h using “Taguchi methodology”. The maximum percentage grafting (PG) and grafting efficiency (GE) were estimated to be 13.8 and 92.8%, respectively at the optimum combination of the reaction parameters. Differential scanning calorimetry and dynamic mechanical analysis results exhibited a decrease in T{sub g} value for the functionalized elastomer. Thermogravimetric analysis displayed an increase in the thermal stability of C-g-XNBR. MTT [3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide] assay and hemolysis studies proved that functionalized rubber as biocompatible. Moreover, functionalized XNBR exhibited a potential bactericidal effect against Staphylococcus aureus and Escherichia coli strains. Fire and flame retardancy study revealed an increased LOI (limiting oxygen index) for C-g-XNBR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Structure Development in Cross-Linked, Soybean Oil-based Waterborne Polyurethanes

Development of waterborne polyurethanes (WPU) using bio-based sources represents a step towards sustainable materials science and industry. We synthesized bio-based cationic water-dispersed crosslinked polyurethanes from high oleic soybean oil (HOSO) polyol, isophorone diisocyanate, and methyldiethanol amine, with varying ionic group contents after neutralization with acetic acid. Our primary objective was to analyze how crosslinking affects the dispersion process and film properties in multifunctional systems. The synthesis-structure-property relationship is elucidated through comprehensive analyses of the products at different stages of the synthesis. The dispersion of the WPU particles in water must occur prior to gelation during the final preparation, leading to incomplete conversion and the formation of imperfect networks. Insight into the synthesis process and polymer structure was gained by simulating polymer network parameters. Morphological analyses using synchrotron-based X-ray scattering and atomic force microscopy revealed a hierarchical structure within the WPU films. Importantly, all the films prepared in this study, without using coalescence agents, have low water absorption and high water contact angles, demonstrating their potential for textile and leather coatings and other applications.

bio-based polymers↗

DOE OSTI2018

Hydrogen Annealing Effect on the Magnetic Properties of ZnCoO/MoS{sub 2} Hybrid

The ZnCoO/MoS{sub 2} hybrid is successfully synthesized through a general and facile process. High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectra reveal that the hybrid consists of wurtzite ZnCoO and few layers of MoS{sub 2}, which shows a paramagnetic property. In contrast, the hybrid presents clear magnetic hysteresis at room temperature with a H{sub 2} post-annealing process. No Co metal nanoclusters can be identified by XRD and HRTEM. The red shift of E{sub 2g}{sup 1} and A{sub 1g} peak indicates the strain effect induced by H{sub 2} annealing. On the other hand, the disappeared peak at 477 cm{sup −1} can be ascribed to the modification of the interface and surface state of the ZnCoO. Temperature-dependent Raman spectroscopies demonstrate the significant H{sub 2} annealing effect on the structural properties of ZnCoO/MoS{sub 2} hybrid. The interplay between the electron interaction at the interface and oxygen vacancies of ZnCoO can be responsible for the magnetic properties of the ZnCoO/MoS{sub 2} hybrid. The tunable magnetic properties have a promising application in multifunctional MoS{sub 2}-based semiconductor and spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2019

Magneto-electronic and Thermodynamic Properties of Quaternary NiFeMnZ (Z = In, Sn) New Spin Gapless Semiconductors

This paper deals with investigation of magneto-electronic and thermodynamic properties of new spin gapless semiconductor quaternary NiFeMnZ (Z = In, Sn) Heusler alloys. In addition, electronic properties such as band structure and density of states were studied in detail. The obtained results are based on first-principles calculations, using the full potential linearized augmented plane wave (FP-LAPW) method within well-known generalized gradient approximation (GGA) coupling with spin-orbit calculation (SOC) in framework of the density functional theory (DFT) implemented in the WIEN2k package. As results, the alloys were found to be new spin gapless semiconductors (SGSs), and both compounds in LiMgPdSn-type crystal structure are stable. The magnetic moment of NiFeMnIn and NiFeMnSn was 4.39 and 4.99 μ{sub B} per formula unit, respectively. This result is in agreement with the Slater-Pauling rule (M{sub tot} = 24 −Z{sub tot}). Furthermore, the thermodynamic properties were also predicted. All these multifunctionalities lead to crucial interest for developing future spintronics device generations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

A Review on Iron Oxide Nanoparticles and Their Biomedical Applications

The iron oxide nanoparticles have a great attraction in biomedical applications due to their non-toxic role in the biological systems. The iron oxide nanoparticles have both magnetic behaviour and semiconductor property which lead to multifunctional biomedical applications. The iron oxide nanoparticles used in biomedical fields such as antibacterial, antifungal and anticancer were reviewed. The uses of hematite (α-Fe{sub 2}O{sub 3}), maghemite (γ-Fe{sub 2}O{sub 3}) and magnetite (Fe{sub 3}O{sub 4}) nanoparticles, for an inhibition time in biological activities, are listed in this work. Also, this review explains the use of iron oxide nanoparticles in the biomedical fields with particular attention to the application of hematite and superparamagnetic iron oxide nanoparticles. In this review, analysis reveals that the role of iron oxide in biological activity is good due to its biocompatibility, biodegradability, ease of synthesis and different magnetic behaviours. The change of properties of iron oxide nanoparticles such as particle size, morphology, surface, agglomeration and electronic properties has specific impact in biomedical application. The review mainly focused in and discussed about antibacterial, anticancer, bone marrow and cell labelling activities. From this review work, the iron oxide nanoparticle may be specialised in particular bacterial and cancer treatments. Also discussed are the iron oxide nanoparticle-specific biomedical applications like human placenta, insulin and retinal locus treatments.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2019

Magnetodielectric Relaxation in Ho{sub 2}Ti{sub 2}O{sub 7} and Dy{sub 2}Ti{sub 2}O{sub 7} Spin Ice

Materials having magnetoelectricity is one of the highest priority research topics for the development of novel multifunctional materials. Recently, Ho{sub 2}Ti{sub 2}O{sub 7} and Dy{sub 2}Ti{sub 2}O{sub 7} pyrochlores show the coexistence of ferroelectricity with complex magnetism. The present study shows that these spin ices show an anomalous nature of relaxation taking place at ~ 4 K. Arrhenius nature of frequency dispersion behavior and order of characteristic relaxation time τ{sub 0} suggest that observed relaxation is associated with non-interacting electric dipoles induced by lattice distortions. These lattice distortions are associated with prevailing 3in-1out spin structure via magnetostriction mechanism, thus enabling the control of ferroelectricity though magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2019

Structural, Bulk Permittivity, and Magnetic Properties of Lead-Free Electronic Material: Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12}

In this report, Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12} (BBCFNTO termed further) ceramics were synthesized using a conventional ceramic processing route. The formation of multiple phases has been confirmed from by the XRD pattern at room temperature. The surface micrograph indicates the uniform distribution of grains with distinct grain boundary. The co-relation between the impedance and dielectric parameters was realized by using a phase sensitive meter over a good temperature and frequency range. The temperature- and frequency-dependent dielectric properties are linked to the conduction mechanism. The dielectric constant (K) and loss (tanδ) are increased sharply at high-temperature region, which is expected to be the onset of dipolar relaxation phenomena. The contribution of grain boundary (GBs) and grain (Gs) effects can be identified using the complex impedance spectroscopy. This synthesized material is investigated to model multifunctional devices.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Gate-tunable ReS{sub 2}/MoTe{sub 2} heterojunction with high-performance photodetection

Van der Waals heterojunctions based on atomically thin two-dimensional (2D) materials have attracted numerous attention for their special scientific research value and promising applications in photoelectric and micro-nano electronic devices. Especially, the carrier generation, separation, and extraction process in 2D materials can be easily modulated by external field, which may facilitate some multifunctional electronics and optoelectronics. In this paper, we report a unique type-II band alignment ReS{sub 2}/MoTe{sub 2} heterojunction with rectification inversion due to the fact the bottom few-layer MoTe{sub 2} can be easily tuned from p-type to n-type state through the applied back-gate voltage. Then we study photodetection properties of ReS{sub 2}/MoTe{sub 2} heterojunction, a relatively fast photoresponse time of 109 μs and a considerable photoresponsivity of 0.34 AW{sup −1} for 520 nm at room temperature show great potential in photodetection. Our studies of ReS{sub 2}/MoTe{sub 2} heterojunction with rectification inversion and high-performance photodetection will facilitate the development of electronics and optoelectronics based on atomically-thin heterojunctions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2012

Bench- and Pilot-Scale Studies of Reaction and Regeneration of Ni-Mg-K/Al2O3 for Catalytic Conditioning of Biomass-Derived Syngas

The National Renewable Energy Laboratory (NREL) is collaborating with both industrial and academic partners to develop technologies to help enable commercialization of biofuels produced from lignocellulosic biomass feedstocks. The focus of this paper is to report how various operating processes, utilized in-house and by collaborators, influence the catalytic activity during conditioning of biomass-derived syngas. Efficient cleaning and conditioning of biomass-derived syngas for use in fuel synthesis continues to be a significant technical barrier to commercialization. Multifunctional, fluidizable catalysts are being developed to reform undesired tars and light hydrocarbons, especially methane, to additional syngas, which can improve utilization of biomass carbon. This approach also eliminates both the need for downstream methane reforming and the production of an aqueous waste stream from tar scrubbing. This work was conducted with NiMgK/Al{sub 2}O{sub 3} catalysts. These catalysts were assessed for methane reforming performance in (i) fixed-bed, bench-scale tests with model syngas simulating that produced by oak gasification, and in pilot-scale, (ii) fluidized tests with actual oak-derived syngas, and (iii) recirculating/regenerating tests using model syngas. Bench-scale tests showed that the catalyst could be completely regenerated over several reforming reaction cycles. Pilot-scale tests using raw syngas showed that the catalyst lost activity from cycle to cycle when it was regenerated, though it was shown that bench-scale regeneration by steam oxidation and H{sub 2} reduction did not cause this deactivation. Characterization by TPR indicates that the loss of a low temperature nickel oxide reduction feature is related to the catalyst deactivation, which is ascribed to nickel being incorporated into a spinel nickel aluminate that is not reduced with the given activation protocol. Results for 100 h time-on-stream using a recirculating/regenerating reactor suggest that this type of process could be employed to keep a high level of steady-state reforming activity, without permanent deactivation of the catalyst. Additionally, the differences in catalyst performance using a simulated and real, biomass-derived syngas stream indicate that there are components present in the real stream that are not adequately modeled in the syngas stream. Heavy tars and polycyclic aromatics are known to be present in real syngas, and the use of benzene and naphthalene as surrogates may be insufficient. In addition, some inorganics found in biomass, which become concentrated in the ash following biomass gasification, may be transported to the reforming reactor where they can interact with catalysts. Therefore, in order to gain more representative results for how a catalyst would perform on an industrially-relevant scale, with real contaminants, appropriate small-scale biomass solids feeders or slip-streams of real process gas should be employed.

09 BIOMASS FUELS↗