SEARCH · Search NASA

Results for “numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Numerical simulation of crossing/turbulent boundary layer interaction at Mach 8.3 comparison of zero and two-equation turbulence models

A 3D hypersonic crossing shock wave/turbulent boundary layer interaction is examined numerically. The test geometry consists of a pair of opposing sharp fins of angle alpha = 15 deg mounted on a flat plate. The freestream Mach number is 8.28. Two theoretical models are evaluated. The full 3D Reynolds-averaged Navier-Stokes equations are solved using the Baldwin-Lomax algebraic turbulent eddy viscosity model and the Rodi turbulence model. Computed results for both cases show good agreement with experiment for flat plate surface pressure and for pitot pressure and yaw angle profiles in the flowfield. General agreement is obtained for surface flow direction. Fair to poor agreement is obtained for surface heat transfer, indicating a need for more accurate turbulence models. The overall flowfield structure is similar to that observed in previous crossing shock interaction studies.

Narayanswami, N.↗

NASA NTRS1985

Numerical simulation of flow through scramjet inlets using a three-dimensional Navier-Stokes code

A three-dimensional Reynolds-averaged Navier-Stokes code has been used to numerically analyze flow through a two-strut, supersonic combustion ramjet (scramjet) inlet configuration. It solves the governing equations in full conservation form using either the fully explicit or explicit-implicit method due to MacCormack. An algebraic two-layer eddy viscosity model is used for turbulent flow calculations. The analysis allows inclusion of end effects which are caused by the aft placement of the cowl on the underside of the inlet. A special grid has been developed to accommodate the struts embedded in the inlet flow field. Detailed numerical results are presented here for the two-strut configuration, and a comparison is made with the available experimental results.

Kumar, A.↗

NASA NTRS1988

Numerical simulation of morphological development during Ostwald ripening

The morphological evolution of a small number of particles undergoing Ostwald ripening in two dimensions was investigated using a boundary integral technique. The numerical calculations show that, in many cases, interparticle diffusional interactions do not induce large distortions in particle morphology from a circle, due to the strong local interaction between regions of different curvature on the same particle. Particle migration due to interparticle diffusional interactions was observed, with the migration distance larger than the initial radius of a particle, which is linked to the particle spatial arrangement. As diffusion is the mechanism for the migration, it is expected that particle movement is a generic aspect of the coarsening process at high volume fractions of coarsening phase and, possibly, at low volume fractions. The calculations support unambiguously the Ostwald ripening mechanism for flat formation during liquid-phase sintering. As such, the appearance or regions of low interfacial curvature is a dynamic phenomenon dependent on interparticle diffusion.

Voorhees, P. W.↗

NASA NTRS1991

FD-TD numerical simulation of an entire lightning strike on the C160 aircraft

Experimental transient electromagnetic field measurements were performed on a Transall C160 aircraft during in-flight lightning strikes. The data allow a test of the predictive capabilities of a three dimensional time domain finite difference code (ALICE) developed at ONERA in order to investigate lightning-aircraft interactions. Using a transfer function technique in the 3D code, it is shown that a bi-leader attached to an aircraft can be simulated by a linear model, and so the electromagnetic fields can be calculated anywhere on the vehicle. Comparison of experimental and numerical results were made for several lightning strikes. Skin current density and electromagnetic field distributions are discussed in detail.

Alliot, J. C.↗

NASA NTRS2001

Numerical Simulation of Delamination Growth in Composite Materials

The use of decohesion elements for the simulation of delamination in composite materials is reviewed. The test methods available to measure the interfacial fracture toughness used in the formulation of decohesion elements are described initially. After a brief presentation of the virtual crack closure technique, the technique most widely used to simulate delamination growth, the formulation of interfacial decohesion elements is described. Problems related with decohesion element constitutive equations, mixed-mode crack growth, element numerical integration and solution procedures are discussed. Based on these investigations, it is concluded that the use of interfacial decohesion elements is a promising technique that avoids the need for a pre-existing crack and pre-defined crack paths, and that these elements can be used to simulate both delamination onset and growth.

Camanho, P. P.↗

NASA NTRS1981

Numerical simulation of axisymmetric turbulent jet flow

The transport equations for the turbulent Reynolds stresses and energy dissipation rate in conjunction with the governing equations for the vorticity and stream function are numerically solved for in the case of an axisymmetric jet into stagnant surroundings. The time dependence of the equations is retained allowing for any transient results to be interpreted in terms of conditionally averaged flow quantities. The general form of the governing differential equations is presented as well as the numerical procedure used in the solution. Comments concerning the inherent limitations in solving the time-dependent set of equations are made and the versatility of the approach examined. Comparisons of the various components of the stationary Reynolds stress tensor are made with experimental results.

Gatski, T. B.↗

NASA NTRS1987

Numerical simulation of cometary nuclei. III - Internal temperatures of cometary nuclei

The thermal diffusion equation for the internal temperature of cometary nuclei is exactly solved by means of a one-dimensional numerical model in order to shed light on the complex behavior of these temperatures with varying orbital and thermal parameters and in order to consider possible cometary nucleus thermal evolution targets for comet rendezvous and/or sample-return missions. The concept of 'new' and 'old' comets, classified in terms of how many passages around the sun have been made, may take on new meaning in view of the present demonstration that differences in eccentricity between two comets having the same period and number of apparitions may yield significantly different internal temperature profiles.

Herman, Gary↗

NASA NTRS1993

Martian global dust storms - Zonally symmetric numerical simulations including size-dependent particle transport

A zonally symmetric primitive-equation grid-point model of the Martian atmosphere is coupled with an aerosol transport/microphysical model in order to numerically investigate the size-dependent transport of dust particles in the Martian atmosphere. The coupled model accounts for diabatic heating due to a radiatively active evolving dust field, but neglects feedbacks between atmosphere-surface interactions and surface dust lifting. The differing suspension lifetimes of dust particles of various sizes (radius = 1-80 microns), in conjunction with spatially varying atmospheric dynamics, result in latitudinal differences in several measurements of the column integrated particle concentration. This work indicates the importance of considering the full range of particle sizes (and shapes) of the suspended dust during Martian global dust storms and their impact upon the spatial extent and wavelength-dependent radiative influence of such storms.

Murphy, James R.↗

NASA NTRS1990

A numerical simulation of the flow in the diffuser of the NASA Lewis icing research tunnel

The flow in the diffuser section of the Icing Research Tunnel at the NASA Lewis Research Center is numerically investigated. To accomplish this, an existing computer code is utilized. The code, known as PARC3D, is based on the Beam-Warming algorithm applied to the strong conservation law form of the complete Navier-Stokes equations. The first portion of the paper consists of a brief description of the diffuser and its current flow characteristics. A brief discussion of the code work follows. Predicted velocity patterns are then compared with the measured values.

Addy, Harold E., Jr.↗

NASA NTRS1990

A numerical simulation of the flow in the diffuser of the NASA Lewis Icing Research Tunnel

Addy, Harold E., Jr.↗

NASA NTRS2005

Numerical Simulations of Plasma Based Flow Control Applications

A mathematical model was developed to simulate flow control applications using plasma actuators. The effects of the plasma actuators on the external flow are incorporated into Navier Stokes computations as a body force vector. In order to compute this body force vector, the model solves two additional equations: one for the electric field due to the applied AC voltage at the electrodes and the other for the charge density representing the ionized air. The model is calibrated against an experiment having plasma-driven flow in a quiescent environment and is then applied to simulate a low pressure turbine flow with large flow separation. The effects of the plasma actuator on control of flow separation are demonstrated numerically.

Suzen, Y. B.↗

NASA NTRS1976

Numerical simulation of small perturbation transonic flows

The results of a systematic study of small perturbation transonic flows are presented. Both the flow over thin airfoils and the flow over wedges were investigated. Various numerical schemes were employed in the study. The prime goal of the research was to determine the efficiency of various numerical procedures by accurately evaluating the wave drag, both by computing the pressure integral around the body and by integrating the momentum loss across the shock. Numerical errors involved in the computations that affect the accuracy of drag evaluations were analyzed. The factors that effect numerical stability and the rate of convergence of the iterative schemes were also systematically studied.

Seebass, A. R.↗

NASA NTRS1981

Numerical simulation of steady supersonic flow

A noniterative, implicit, space-marching, finite-difference algorithm was developed for the steady thin-layer Navier-Stokes equations in conservation-law form. The numerical algorithm is applicable to steady supersonic viscous flow over bodies of arbitrary shape. In addition, the same code can be used to compute supersonic inviscid flow or three-dimensional boundary layers. Computed results from two-dimensional and three-dimensional versions of the numerical algorithm are in good agreement with those obtained from more costly time-marching techniques.

Schiff, L. B.↗

NASA NTRS1992

A unified approach for numerical simulation of viscous compressible and incompressible flows over adiabatic and isothermal walls

A new formulation (including the choice of variables, their non-dimensionalization, and the form of the artificial viscosity) is proposed for the numerical solution of the full Navier-Stokes equations for compressible and incompressible flows with heat transfer. With the present approach, the same code can be used for constant as well as variable density flows. The changes of the density due to pressure and temperature variations are identified and it is shown that the low Mach number approximation is a special case. At zero Mach number, the density changes due to the temperature variation are accounted for, mainly through a body force term in the momentum equation. It is also shown that the Boussinesq approximation of the buoyancy effects in an incompressible flow is a special case. To demonstrate the new capability, three examples are tested. Flows in driven cavities with adiabatic and isothermal walls are simulated with the same code as well as incompressible and supersonic flows over a wall with and without a groove. Finally, viscous flow simulations of an oblique shock reflection from a flat plate are shown to be in good agreement with the solutions available in literature.

Hafez, M.↗

NASA NTRS1979

Numerical simulation of steady supersonic viscous flow

A noniterative, implicit, space-marching, finite-difference algorithm is developed for the steady thin-layer Navier-Stokes equations in conservation-law-form. The numerical algorithm is applicable to steady supersonic viscous flow over bodies of arbitrary shape. In addition, the same code can be used to compute supersonic inviscid flow or three-dimensional boundary layers. Computed results from two-dimensional and three-dimensional versions of the numerical algorithm are in good agreement with those obtained from more costly time-marching techniques.

Schiff, L. B.↗

NASA NTRS1990

A numerical simulation of the microburst phenomenon - Comparison of a discrete and a parameterized microphysical representation

Two versions of a microburst model that differ in how they represent microphysical processes are described and comparison of the numerical solutions is made. This study focuses on how the versions differ in representing the evaporation of raindrops and the differential sedimentation of drops that develops because of their fallspeeds. The two versions are then compared to demonstrate how predicted microburst characteristics are influenced by the choice of microphysical scheme.

Coen, Janice L.↗

NASA NTRS1991

Numerical simulation of swept-wing flows

Efforts of the last six months to computationally model the transition process characteristics of flow over swept wings are described. Specifically, the crossflow instability and crossflow/Tollmien-Schlichting wave interactions are analyzed through the numerical solution of the full 3D Navier-Stokes equations including unsteadiness, curvature, and sweep. This approach is chosen because of the complexity of the problem and because it appears that linear stability theory is insufficient to explain the discrepancies between different experiments and between theory and experiment. The leading edge region of a swept wing is considered in a 3D spatial simulation with random disturbances as the initial conditions.

Reed, Helen L.↗

NASA NTRS2001

High Order Numerical Simulation of Sound Generated by the Kirchhoff Vortex

An improved high order finite difference method for low Mach number computational aeroacoustics (CAA) is described. The improvements involve the conditioning of the Euler equations in perturbation form to minimize numerical cancellation error, and the use of a stable non-dissipative sixth-order central spatial differencing for the interior points and third-order at the boundary points. The spatial difference operator satisfies the summation-by-parts property to guarantee strict stability for linear hyperbolic systems. Spurious high frequency oscillations are damped by a third-order characteristic-based filter. The objective of this paper is to apply these improvements in the simulation of sound generated by the Kirchhoff vortex.

Mueller, Bernhard↗