Search NASA⌕ Search

SEARCH · Search NASA

Results for “patterned beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Development of a MeV proton beam irradiation system

A proton beam irradiation system for the application of the MeV class proton beam, such as an implantation for a power semiconductor device and a smart-cut technology for a semiconductor production process, has been developed. This system consists of a negative ion source, an Einzel lens for a low energy beam transport, accelerating tubes, a gas stripper, a Cockroft-Walton high voltage power supply with 1 MV, a vacuum pumping system, and a high pressure insulating gas system. The negative hydrogen ion source is based on TRIUMF's design. Following the tandem accelerator, a pair of magnets is installed for raster scanning of the MeV proton beam to obtain a uniform irradiation pattern on the target. The system is 7 m long from the ion source to the target and is optimized for the proton beam irradiation. The details of the system development will be described.

43 PARTICLE ACCELERATORS↗

Fiber Reinforced Composite Cores and Panels

A fiber reinforced core panel is formed from strips of plastics foam helically wound with layers of rovings to form webs which may extend in a wave pattern or may intersect transverse webs. Hollow tubes may replace foam strips. Axial rovings cooperate with overlying helically wound rovings to form a beam or a column. Wound roving patterns may vary along strips for structural efficiency. Wound strips may alternate with spaced strips, and spacers between the strips enhance web buckling strength. Continuously wound rovings between spaced strips permit folding to form panels with reinforced edges. Continuously wound strips are helically wrapped to form annular structures, and composite panels may combine both thermoset and thermoplastic resins. Continuously wound strips or strip sections may be continuously fed either longitudinally or laterally into molding apparatus which may receive skin materials to form reinforced composite panels.

Day, Stephen W.↗

Patterning via optical-saturable transformations: A review and simple simulation model

Most of the nanoscale fabrication in the semiconductor industry is based on patterning with scanning-electron beam lithography (SEBL). Although this approach is very versatile and has very high resolution, it is intrinsically a serial writing process, and therefore, relatively slow. Our group has been investigating alternative nano-fabrication techniques, adapted from ideas of saturating optical transitions such as those used in stimulated emission-depletion microscopy and related methods, and optical interference lithography. Linewidths and resolutions on the scale of a few tens of nanometers and below are highly desirable for various applications in nanotechnology. However, the spatial resolution of optical lithography is restricted by diffraction. In the past, we developed absorbance modulation to overcome this limit. This approach utilizes photochromic molecules that can be optically switched between two thermally stable states, one opaque and the other transparent. However, absorbance modulation is limited to surface (2-D) patterning. Here, we report on an alternative approach that exploits unique combinations of spectrally selective reversible and irreversible photochemical transitions to achieve deep subwavelength resolution with potential extension to 3-dimensions. This approach, which we refer to as patterning via optical-saturable transformations have the potential for massive parallelism, enabling the creation of nanostructures and devices at a speed far surpassing what is possible with SEBL. The aim of our research is to translate the success in circumventing Abbe's diffraction limit in optical microscopy to optical lithography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-resolution projection image reconstruction of thick objects by hard x-ray diffraction microscopy

Hard x-ray diffraction microscopy enables us to observe thick objects at high spatial resolution. The resolution of this method is limited, in principle, by only the x-ray wavelength and the largest scattering angle recorded. As the resolution approaches the wavelength, the thickness effect of objects plays a significant role in x-ray diffraction microscopy. In this paper, we report high-resolution hard x-ray diffraction microscopy for thick objects. We used highly focused coherent x rays with a wavelength of {approx}0.1 nm as an incident beam and measured the diffraction patterns of a {approx}150-nm-thick silver nanocube at the scattering angle of {approx}3 deg. We observed a characteristic contrast of the coherent diffraction pattern due to only the thickness effect and collected the diffraction patterns at nine incident angles so as to obtain information on a cross section of Fourier space. We reconstructed a pure projection image by the iterative phasing method from the patched diffraction pattern. The edge resolution of the reconstructed image was {approx}2 nm, which was the highest resolution so far achieved by x-ray microscopy. The present study provides us with a method for quantitatively observing thick samples at high resolution by hard x-ray diffraction microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increasing the structural variety of discrete nondiffracting wave fields

We investigate discrete nondiffracting beams (DNBs) being the foundation of periodic and quasiperiodic intensity distributions. Besides the number of interfering plane waves, the phase relation among these waves is decisive to form a particular intensity lattice. In this manner, we systematize different classes of DNBs and present similarities as well as differences. As one prominent instance, we introduce the class of sixfold nondiffracting beams, offering four entirely different transverse intensity distributions: in detail, the hexagonal, kagome, and honeycomb pattern, as well as a hexagonal vortex beam. We further extend our considerations to quasiperiodic structures and show the changeover to Bessel beams. In addition, we introduce a highly flexible implementation of the experimental analog of DNBs, namely discrete pseudo-nondiffracting beams, and present locally resolved intensity and phase measurements, which underline the nondiffracting character of the generated wave fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relation between the diffraction pattern visibility and dispersion of particle sizes in an ektacytometer

We have calculated the angular distribution of the light intensity in the diffraction pattern arising upon scattering of a laser beam on a suspension of red blood cells in an ektacytometer. We have estimated the diffraction pattern visibility in the region of the first diffraction minimum and the first diffraction maximum as a function of particle size variation. It is shown that in this fragment of the diffraction pattern its visibility decreases already twofold in the case of a standard deviation of the particle size from the average value, equal to 8%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stratified Diffractive Optic Approach for Creating High Efficiency Gratings

Gratings with high efficiency in a single diffracted order can be realized with both volume holographic and diffractive optical elements. However, each method has limitations that restrict the applications in which they can be used. For example, high efficiency volume holographic gratings require an appropriate combination of thickness and permittivity modulation throughout the bulk of the material. Possible combinations of those two characteristics are limited by properties of currently available materials, thus restricting the range of applications for volume holographic gratings. Efficiency of a diffractive optic grating is dependent on its approximation of an ideal analog profile using discrete features. The size of constituent features and, consequently, the number that can be used within a required grating period restricts the applications in which diffractive optic gratings can be used. These limitations imply that there are applications which cannot be addressed by either technology. In this paper we propose to address a number of applications in this category with a new method of creating high efficiency gratings which we call stratified diffractive optic gratings. In this approach diffractive optic techniques are used to create an optical structure that emulates volume grating behavior. To illustrate the stratified diffractive optic grating concept we consider a specific application, a scanner for a space-based coherent wind lidar, with requirements that would be difficult to meet by either volume holographic or diffractive optic methods. The lidar instrument design specifies a transmissive scanner element with the input beam normally incident and the exiting beam deflected at a fixed angle from the optical axis. The element will be rotated about the optical axis to produce a conical scan pattern. The wavelength of the incident beam is 2.06 microns and the required deflection angle is 30 degrees, implying a grating period of approximately 4 microns. Creating a high efficiency volume grating with these parameters would require a grating thickness that cannot be attained with current photosensitive materials. For a diffractive optic grating, the number of binary steps necessary to produce high efficiency combined with the grating period requires feature sizes and alignment tolerances that are also unattainable with current techniques. Rotation of the grating and integration into a space-based lidar system impose the additional requirements that it be insensitive to polarization orientation, that its mass be minimized and that it be able to withstand launch and space environments.

Chambers, Diana M.↗

Optical properties of self assembled GaN polarity inversion domain boundary

We report the fabrication of GaN lateral polarity inversion heterostructure with self assembled crystalline inversion domain boundaries (IDBs). The sample was fabricated by two step molecular-beam epitaxy (MBE) with microlithography patterning in between to define IDBs. Despite the use of circular pattern, hexagonal crystalline IDBs were self assembled from the circular pattern during the second MBE growth. Both cathodoluminescent (CL) and photoluminescent (PL) measurements show a significant enhanced emission at IDBs and in particular at hexagonal corners. The ability to fabricate self assembled crystalline IDBs and its enhanced emission property can be useful in optoelectronic applications.

36 MATERIALS SCIENCE↗

Modeling the Effect of Optical System Aberrations on Coherent Lidar Heterodyne Efficiency

Signal-to-noise ratio of a coherent lidar is directly proportional to heterodyne efficiency, which is a measure of the mixing of the local oscillator and signal beams. Formulation of heterodyne efficiency is presented and then extended to include the primary, or Seidel, aberrations arising from optical systems. Animations of the intensity pattern for mixing of truncated Gaussian beams in the presence of Seidel aberrations are shown to illustrate the effect on heterodyne efficiency. Results showing the degradation of heterodyne efficiency with an increasing amount of Seidel aberration are given for the same Gaussian beams. This is further extended to predict the change in heterodyne efficiency of a coherent lidar as a result of its optical components by including aberration data derived from optical testing.

Chambers, Diana M.↗

Variation in Use of Androgen Suppression With External-Beam Radiotherapy for Nonmetastatic Prostate Cancer

Purpose: To describe practice patterns associated with androgen suppression (AS) stratified by disease risk group in patients undergoing external-beam radiotherapy (EBRT) for localized prostate cancer. Methods and Materials: We identified 2,184 low-risk, 2,339 intermediate-risk, and 2,897 high-risk patients undergoing EBRT for nonmetastatic prostate cancer diagnosed between January 1, 2004, and December 31, 2005, in the linked Surveillance, Epidemiology, and End Results-Medicare database. We examined the association of patient, clinical, and demographic characteristics with AS use by multivariate logistic regression. Results: The proportions of patients receiving AS for low-risk, intermediate-risk, and high-risk prostate cancer were 32.2%, 56.3%, and 81.5%, respectively. AS use among men in the low-risk disease category varied widely, ranging from 13.6% in Detroit to 47.8% in Kentucky. We observed a significant decline in AS use between 2004 and 2005 within all three disease risk categories. Men aged {>=}75 years or with elevated comorbidity levels were more likely to receive AS. Conclusion: Our results identified apparent overuse and underuse of AS among men within the low-risk and high-risk disease categories, respectively. These results highlight the need for clinician and patient education regarding the appropriate use of AS. Practice patterns among intermediate-risk patients reflect the clinical heterogeneity of this population and underscore the need for better evidence to guide the treatment of these patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Inverse Tomo-Lithography for Making Microscopic 3D Parts

According to a proposal, basic x-ray lithography would be extended to incorporate a technique, called inverse tomography, that would enable the fabrication of microscopic three-dimensional (3D) objects. The proposed inverse tomo-lithographic process would make it possible to produce complex shaped, submillimeter-sized parts that would be difficult or impossible to make in any other way. Examples of such shapes or parts include tapered helices, paraboloids with axes of different lengths, and even Archimedean screws that could serve as rotors in microturbines. The proposed inverse tomo-lithographic process would be based partly on a prior microfabrication process known by the German acronym LIGA (lithographie, galvanoformung, abformung, which means lithography, electroforming, molding). In LIGA, one generates a precise, high-aspect ratio pattern by exposing a thick, x-ray-sensitive resist material to an x-ray beam through a mask that contains the pattern. One can electrodeposit metal into the developed resist pattern to form a precise metal part, then dissolve the resist to free the metal. Aspect ratios of 100:1 and patterns into resist thicknesses of several millimeters are possible.

White, Victor↗

On-chip polarimetry for high-throughput screening of nanoliter and smaller sample volumes

A polarimetry technique for measuring optical activity that is particularly suited for high throughput screening employs a chip or substrate (22) having one or more microfluidic channels (26) formed therein. A polarized laser beam (14) is directed onto optically active samples that are disposed in the channels. The incident laser beam interacts with the optically active molecules in the sample, which slightly alter the polarization of the laser beam as it passes multiple times through the sample. Interference fringe patterns (28) are generated by the interaction of the laser beam with the sample and the channel walls. A photodetector (34) is positioned to receive the interference fringe patterns and generate an output signal that is input to a computer or other analyzer (38) for analyzing the signal and determining the rotation of plane polarized light by optically active material in the channel from polarization rotation calculations.

Bornhop, Darryl J.↗

Large area direct-write focused ion-beam lithography with dual-beam microscope.

The authors have investigated the performance of focused ion-beam (FIB) direct-write lithography for large area (multiple write-field) patterning in an FEI Nova Nanolab 600 dual-beam microscope. Their system is configured with a 100 nm resolution X-Y stage and a RAITH ELPHY LITHOGRAPHY control interface, with its own integrated 16 bit DAC pattern generator and software. Key issues with regard to configuration, process parameters, and procedures have been addressed. Characterization of stitching errors, pattern repeatability, and drift were performed. Offset lithography (multiple exposures with offset write fields) and in-field registration marks were evaluated for correcting stitching errors, and a test microfluidic device covering an area of 1 x 1.4 mm{sup 2} was successfully fabricated. The authors found that by using a combination of offset lithography and in-field registration mark correction methods, the stitching errors can be kept well below 100 nm. They also found that due to higher beam deflection speed provided by the electrostatic scanning in FIB systems versus the wide-spread electron-beam systems with electromagnetic scanning, FIB lithography can be just as fast as electron-beam lithography for typical mill depths down to about 200-500 nm (material dependent). This opens the door for a large suite of applications for materials where pattern transfer is difficult or impossible by reactive methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Turning electrospun poly(methyl methacrylate) nanofibers into graphitic nanostructures by in situ electron beam irradiation

Using ultrathin electrospun poly(methyl methacrylate) (PMMA) nanofibers as precursor, graphitic nanofibers, nanobridges, nanocones, and fullerenelike onions could be prepared by electron beam irradiation in a controlled manner. With the help of the high resolution transmission electron microscopy, the real time processing of the carbonization and graphitization of the PMMA nanofibers could be investigated. This way to obtain graphitic nanostructures has promising applications in graphitic carbon nanostructure electronics and devices. Because PMMA is a widely used standard high resolution electron resist, this graphitization could be combined with electron beam lithography to obtain high resolution patterned graphitic circuits.

36 MATERIALS SCIENCE↗

Chemical composition and thermal stability of GaAs oxides grown by AFM anodic oxidation for site-controlled growth of InAs quantum dots

We have fabricated GaAs oxides by using atomic force microscope (AFM)-assisted anodic oxidation at various bias voltages, V{sub ox}, and studied their chemical compositions and thermal stabilities. The oxides grown at bias voltages less than 30 V desorbed after standard thermal cleaning in molecular beam epitaxy, while the oxide patterns fabricated at V{sub ox}{>=}40 V survived on the surface. We have further investigated the chemical composition of the oxides by X-ray photoemission spectroscopy. It has been found that the AFM oxides grown at V{sub ox}{approx}10 V predominantly consist of Ga{sub 2}O and GaO, whereas those grown at V{sub ox}{approx}50 V contain a Ga{sub 2}O{sub 3}-component. This result indicates that the better thermal stability of AFM oxides grown at V{sub ox}{>=}40 V can be attributed to the formation of Ga{sub 2}O{sub 3}. We grew a GaAs buffer layer on the oxide nanomasks and obtained nanoholes. After supplying InAs, selective dot nucleation took place in the nanoholes, resulting in successful formation of site-controlled QDs.

36 MATERIALS SCIENCE↗

Superconductivity in the system Mo{sub x}C{sub y}Ga{sub z}O{sub δ} prepared by focused ion beam induced deposition

We have prepared the new amorphous superconductor Mo{sub x}C{sub y}Ga{sub z}O{sub δ} with a maximum critical temperature T{sub c} of 3.8 K by the direct-write nano-patterning technique of focused (gallium) ion beam induced deposition (FIBID) using Mo(CO){sub 6} as precursor gas. From a detailed analysis of the temperature-dependent resistivity and the upper critical field, we found clear evidence for proximity of the samples to a disorder-induced metal-insulator transition. We observed a strong dependence of T{sub c} on the deposition parameters and identified clear correlations between T{sub c}, the localization tendency visible in the resistance data and the sample composition. By an in-situ feedback-controlled optimization process in the FIB-induced growth, we were able to identify the beam parameters which lead to samples with the largest T{sub c}-value and sharpest transition into the superconducting state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lateral damage in graphene carved by high energy focused gallium ion beams

Raman mapping is performed to study the lateral damage in supported monolayer graphene carved by 30 keV focused Ga{sup +} beams. The evolution of the lateral damage is tracked based on the profiles of the intensity ratio between the D (1341 cm{sup −1}) and G (1582 cm{sup −1}) peaks (I{sub D}/I{sub G}) of the Raman spectra. The I{sub D}/I{sub G} profile clearly reveals the transition from stage 2 disorder into stage 1 disorder in graphene along the direction away from the carved area. The critical lateral damage distance spans from <1 μm up to more than 30 μm in the experiment, depending on the parameters used for carving the graphene. The wide damage in the lateral direction is attributed to the deleterious tail of unfocused ions in the ion beam probe. The study raises the attention on potential sample damage during direct patterning of graphene nanostructures using the focused ion beam technique. Minimizing the total carving time is recommended to mitigate the lateral damage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗