Search NASA⌕ Search

SEARCH · Search NASA

Results for “selective doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Selective activation of methane C–H bond in the presence of methanol

Direct methane to methanol (MTM) conversion over heterogeneous catalysts is a promising route for valorization of methane. The methane C-H bond activation is considered as the key step of the MTM and is the focus of considerable research activity. However, the formed methanol typically suffers from overoxidation largely due to the cleavage of a methanol C-H bond, whose bond dissociation energy is ca. 0.5 eV lower than that of the methane C-H bond, which usually translates to a transition state energy of the methanol C-H bond cleavage that is ca. 0.55 eV lower than that of methane whenever the reactions proceed through a radical mechanism. Furthermore, we propose a general approach for decreasing the transition state energy difference between the CH 4 and CH 3 OH C-H bond dissociation. When a metal-oxide supported cationic transition metal atom and a neighboring oxygen on the oxide surface serve as the active site, the transition state energy difference through a surface-stabilized pathway can be noticeably narrowed as compared with that of a radical pathway. For Ir, Pt and Rh-doped anatase TiO 2 (101), the CH 4 C-H bond activation can be preferred over that of CH 3 OH at significant methanol mole fraction. Also, for PdAu alloys containing adsorbed oxygen and positively charged Pd, calculations suggest in agreement with recent experiments (Science 367 (6474), 193-197) that the CH 4 C-H bond can be selectively activated in the presence of CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materials preparation, single-crystal growth, and the phase diagram of the cuprate high-temperature superconductor La 1.6-x Nd 0.4 Sr x CuO 4

One branch of the La-214 family of cuprate superconductors, La 1.6-x Nd 0.4 Sr x CuO 4 (NdLSCO), has been of significant and sustained interest, in large part because it displays the full complexity of the phase diagram for canonical hole-doped, high TC superconductivity, while also displaying relatively low superconducting critical temperatures. The low superconducting TC’s imply that experimentally accessible magnetic fields can suppress the superconductivity to zero temperature. In particular, this has enabled various transport and thermodynamic studies of the T = 0 ground state in Nd-LSCO, free of superconductivity, across the critical doping p* = 0.23 where the pseudogap phase ends. The strong dependence of its superconducting properties on its crystal symmetry has itself motivated careful studies of the Nd-LSCO structural phase diagram. This paper provides a systematic study and summary of the materials preparation and characterization of both single crystal and polycrystalline samples of Nd-LSCO. Single-phase polycrystalline samples with x spanning the range from 0.01 to 0.40 have been synthesized, and large single crystals of La 1.6-x Nd 0.4 Sr x CuO 4 for select x across the region (0.07, 0.12, 0.17, 0.19, 0.225, 0.24, and 0.26) were grown by the optical floating zone method. Furthermore, systematic neutron and X-ray diffraction studies on these samples were performed at both low and room temperatures, 10 K and 300 K, respectively. These studies allowed us to follow the various structural phase transitions and propose an updated structural phase diagram for NdLSCO. In particular, we found that the low-temperature tetragonal (LTT) phase ends at a critical doping p LTT = 0.255±0.005, clearly separated from p*.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

N-type molecular doping of a semicrystalline conjugated polymer through cation exchange

Control of electrical doping is indispensable in any semiconductor device, and both efficient hole and electron doping are required for many devices. In organic semiconductors, however, electron doping has been essentially more problematic compared to hole doping because in general organic semiconductors have low electron affinities and require dopants with low ionization potentials that are often air-sensitive. Here, we adapt an efficient molecular doping method, so-called ion-exchange doping, to dope electrons in a polymeric semiconductor. We initially reduce the polymeric semiconductor using one electron transfer from molecular dopants, and then the ionized dopants in the resulting air-unstable films are replaced with secondary ions via cation exchange. Improved ambient stability and crystallinity of the doped polymeric semiconductors are achieved when a specific bulky molecular cation was chosen as the secondary ion, compared to conventional methods. The presented strategy can overcome the trade-off relationship between reducing capability and ambient stability in molecular dopants, and a wider selection of dopant ions will help to realize ambient-stable electron conductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Single step solution combustion synthesis of crystalline transuranic-doped rare earth zirconate pyrochlores

One-step solution combustion synthesis (SCS) methods for fabricating durable crystalline transuranic-doped rare earth zirconium pyrochlores are described. Methods are fast, amenable to upscaling, and present a simple strategy for producing crystalline ceramic materials that meet the minimum attractiveness criteria for special nuclear material. The methods include analysis of reactants and reaction conditions to select proper fuel as well as proper fuel content so as to encourage formation of the crystalline product in a single-step synthesis procedure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Selection of the silicon sensor thickness for the Phase-2 upgrade of the CMS Outer Tracker

During the operation of the CMS experiment at the High-Luminosity LHC the silicon sensors of the Phase-2 Outer Tracker will be exposed to radiation levels that could potentially deteriorate their performance. Previous studies had determined that planar float zone silicon with n-doped strips on a p-doped substrate was preferred over p-doped strips on an n-doped substrate. The last step in evaluating the optimal design for the mass production of about 200 m$^{2}$ of silicon sensors was to compare sensors of baseline thickness (about 300 μm) to thinned sensors (about 240 μm), which promised several benefits at high radiation levels because of the higher electric fields at the same bias voltage. This study provides a direct comparison of these two thicknesses in terms of sensor characteristics as well as charge collection and hit efficiency for fluences up to 1.5 × 10$^{15}$ n$_{eq}$/cm$^{2}$. The measurement results demonstrate that sensors with about 300 μm thickness will ensure excellent tracking performance even at the highest considered fluence levels expected for the Phase-2 Outer Tracker.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Crystallization of electrically conductive visibly transparent ITO thin films by wavelength-range-specific pulsed Xe arc lamp annealing

Here, the transparent electric conductors made of indium tin oxide (ITO)-doped glass prepared by a flash lamp annealing (FLA) process were compared with ITO-doped glass prepared via a conventional rapid thermal annealing (RTA) process. Stylus surface profilometry was used to determine thicknesses, scanning electron microscopy was used to image surfaces, X-ray diffraction was used to determine film structures, X-ray photoelectron spectroscopy was used to determine oxidation states and film compositions, 4-point probe measurements were used to determine electrical conductivities, UV–Vis spectroscopy was used to determine film transparencies, and selective light filtering was used to determine which wavelengths of light are needed to anneal ITO into a visibly transparent electrically conductive thin film via an FLA process. The results showed that FLA with visible light can be used to nearly instantaneously anneal ITO to create visibly transparent and electrically conductive ITO thin films on glass. The FLA process achieved this by predominately exciting unoxidized indium, unoxidized tin, tin monoxide (SnO), and non-stoichiometric indium oxide (InO x ), appropriately distributed in an electron beam physical vapor-deposited amorphous ITO thin film, to allow their oxidation and crystallization into an electrically conductive visibly transparent ITO. Though it is possible to prepare ITO-doped glass that is more transparent with an RTA process, the FLA process is significantly faster, has comparable electrical conductivity, and can strongly localize heating to areas of the as-deposited ITO thin film that are not electrically conductive and visibly transparent.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Performance Low-Cobalt Cathode Materials for Li-ion Batteries

The layer-structured Li[Ni x Co y Mn 1-x-y ]O 2 (NCM) cathode materials have been the best choice for increasing electric vehicle driving distance per charge. The high Ni layered oxide represents successfully commercialized NCM cathodes (such as NCM622 and NCA) in lithium-ion batteries (LIBs) for EV applications due to their high energy density and acceptable cycling stability. However, the price of cobalt, the key element within LIBs for stability, has nearly tripled over the past few years due to increased demand from the cell phone industry. As mentioned in the DOE Funding Opportunity Announcement, the current materials shortage will also cause speculation for a future global shortage. Therefore, to meet the requirement and sustainability of the next-generation long-range and low-cost EVs, developing cathode materials with low-Co content to achieve higher energy density and lower cost is both essential and urgent. The overarching objective of this work is to develop stabilized NCM cathode materials with low Co content (namely LiNi x Co y Mn 1-x-y O 2 , y ≤ 0.04) to meet DOE’s goal of reducing Co loading below 50 mg Wh -1 while maintaining energy density greater than 600 Wh kg -1 based on cathode material. Via various dopings and coatings scalable methods, we explored and enhanced the cycling performance of low-cobalt cathodes. The final obtained NCM cathodes paired with graphite anode aim to deliver batteries with a high initial specific energy density of over 240 Wh kg -1 and a low capacity fading rate of less than 20% in 1000 cycles under a C/3 discharge rate. To accomplish this goal, a multidisciplinary team with several co-investigators has been formed from three organizations: The Pennsylvania State University (PSU), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL). The PI and co-investigators are Dr. Donghai Wang (PI) from PSU with expertise in the synthesis of nanostructured materials and manipulation of interfacial properties of electrochemically active materials, Dr. Jagjit Nanda, with substantial knowledge of and expertise in state-of-the-art cathodes from ORNL, Dr. Chao-Yang Wang with significant experience in advanced cell design and fabrication and cell diagnostics from PSU, and Dr. Chongmin Wang with world-wide known expertise of advance atomic scale characterization of electrode materials from PNNL. Furthermore, this project will leverage and synergistically work with the current DOE-funded programs on battery materials at PSU and ORNL and electrode materials characterization at PNNL. During this funded period, we have accomplished milestones stated as follows: • Scale up production of LiFePO 4 (LFP) coated NCM811 with a production of 300g/batch. Fifteen (≥2 Ah) pouch cells with LFP-coated NCM811 cathode are delivered. Self-evaluated pouch cells in PSU show superior over 80% capacity retention performance even after 1500 cycles at C/3 rate. • Various cations (Al, Ti, Zr, and Mo) substitute cobalt in low-cobalt partially and Co-free cathodes. Their effects on crystal structure and electrochemical behavior are explored. • Phosphate compounds as coating materials represent promising surface protection precursors for low-cobalt cathode materials. Therefore, several metal phosphates were selected for improving the NMC cycling performance and are regarded as effective approaches for a scalable and practical surface protection method. • Production of NCM92, where Nickel content is 92% among transition metals, is scaled up from synthesis to coating and heat treatment procedures. Fifteen 2.7Ah pouch cells with Ti-doped NCM92 cathodes and industrial graphite anode are delivered to Idaho National Lab for testing.

25 ENERGY STORAGE↗
DOE OSTI2021

Dynamically Unveiling Metal–Nitrogen Coordination during Thermal Activation to Design High‐Efficient Atomically Dispersed CoN 4 Active Sites

Abstract We elucidate the structural evolution of CoN 4 sites during thermal activation by developing a zeolitic imidazolate framework (ZIF)‐8‐derived carbon host as an ideal model for Co 2+ ion adsorption. Subsequent in situ X‐ray absorption spectroscopy analysis can dynamically track the conversion from inactive Co−OH and Co−O species into active CoN 4 sites. The critical transition occurs at 700 °C and becomes optimal at 900 °C, generating the highest intrinsic activity and four‐electron selectivity for the oxygen reduction reaction (ORR). DFT calculations elucidate that the ORR is kinetically favored by the thermal‐induced compressive strain of Co−N bonds in CoN 4 active sites formed at 900 °C. Further, we developed a two‐step (i.e., Co ion doping and adsorption) Co‐N‐C catalyst with increased CoN 4 site density and optimized porosity for mass transport, and demonstrated its outstanding fuel cell performance and durability.

He, Yanghua↗
DOE OSTI2020

Substituted SrFeO 3 as robust oxygen sorbents for thermochemical air separation: correlating redox performance with compositional and structural properties

Thermochemical air separation via cyclic redox reactions of oxide-based oxygen sorbents has the potential to achieve high energy efficiency. Although a number of promising sorbents have been investigated, further improvements in sorbent performance through a fundamental understanding of the structure–performance relationships are highly desirable. In this study, we systematically investigated the effects of A and B site dopants on the oxygen uptake/release properties (i.e., vacancy formation energy, reduction enthalpy, oxygen release temperature, and oxygen capacity) of the SrFeO 3 family of perovskites as oxygen sorbents. A monotonic correlation between DFT calculated oxygen vacancy formation energy and oxygen release temperature demonstrates the effectiveness of DFT for guiding sorbent selection. Combining vacancy formation energy with stability analysis, dopants such as Ba and Mn have been identified for tuning the redox property of SrFeO 3 sorbents, and increasing the oxygen capacity for temperature and pressure swings when compared to undoped SrFeO 3 . The Mn doped sample proved to be highly stable, with less than a 3% decrease in capacity over 1000 cycles. Although the dynamic nature of the redox process makes it difficult to use a single vacancy formation energy as the descriptor, a systematic approach was developed to correlate the oxygen storage capacities with the sorbents’ compositional properties and vacancy formation energies. The combination of DFT calculations with experimental studies from this study provides a potentially effective strategy for developing improved sorbents for thermochemical air separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Critical role of intercalated water for electrocatalytically active nitrogen-doped graphitic systems

Graphitic materials are very essential in energy conversion and storage because of their excellent chemical and electrical properties. The strategy for obtaining functional graphitic materials involves graphite oxidation and subsequent dissolution in aqueous media, forming graphene-oxide nanosheets (GNs). Restacked GNs contain substantial intercalated water that can react with heteroatom dopants or the graphene lattice during reduction. We demonstrate that removal of intercalated water using simple solvent treatments causes significant structural reorganization, substantially affecting the oxygen reduction reaction (ORR) activity and stability of nitrogen-doped graphitic systems. Amid contrasting reports describing the ORR activity of GN-based catalysts in alkaline electrolytes, we demonstrate superior activity in an acidic electrolyte with an onset potential of ~0.9 V, a half-wave potential (E ½ ) of 0.71 V, and a selectivity for four-electron reduction of >95%. Finally and further, durability testing showed E ½ retention >95% in N 2 - and O 2 -saturated solutions after 2000 cycles, demonstrating the highest ORR activity and stability reported to date for GN-based electrocatalysts in acidic media.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Atomic-scale Imaging of Magnetic and Electronic Orders in Complex Oxides (Final Technical Report)

This research project aimed to expand spin‐polarized scanning tunneling microscopy (SP‐STM) imaging to complex quantum materials, initially focusing on uncovering the magnetic structure of doped Iridium‐based oxides (iridates) with subatomic precision. Chemical doping of complex oxides has led to exciting discoveries over the past few decades, such as high-temperature superconductivity and colossal magnetoresistance. However, the process of chemical doping is often accompanied by spatial inhomogeneity, characterized by nanometer-scale variations in electronic and/or magnetic properties of the material. SP-STM can in principle be used to image magnetic properties, but SP-STM has historically been applied primarily to relatively simple magnetic materials and nanostructures. The main objectives of this project included: (1) visualizing the evolution of magnetism in iridates, as a function of charge carrier doping, temperature and energy, (2) elucidating the relationship between the inhomogeneous electronic structure and magnetism at the nanoscale, and (3) searching for signatures of new magnetic phases in iridates and other quantum materials. Advanced STM and SP-STM imaging was also applied to select kagome metals and superconductors. The comprehensive experimental approach developed in this project provided a foundation to study quantum materials in which spin, charge and orbital degrees of freedom intertwine to create new states of matter.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Time delay and integration detectors using charge transfer devices

An imaging system comprises a multi-channel matrix array of CCD devices wherein a number of sensor cells (pixels) in each channel are subdivided and operated in discrete intercoupled groups of subarrays with a readout CCD shift register terminating each end of the channels. Clock voltages, applied to the subarrays, selectively cause charge signal flow in each subarray in either direction independent of the other subarrays. By selective application of four phase clock voltages, either one, two or all three of the sections subarray sections cause charge signal flow in one direction, while the remainder cause charge signal flow in the opposite direction. This creates a form of selective electronic exposure control which provides an effective variable time delay and integration of three, six or nine sensor cells or integration stages. The device is constructed on a semiconductor sustrate with a buried channel and is adapted for front surface imaging through transparent doped tin oxide gates.

Mccann, D. H.↗
DOE OSTI2018

Metal-loaded plastic scintillators for gamma-ray spectroscopy

Exemplary embodiments of several new metal-loaded plastic scintillators are reported herein, comprising sterically and electronically isolated organotin additive complexes. Distance-dependent quenching relationships have been used as design criteria for the selection and synthesis of these organometallic additives, resulting in increased light yields and improved gamma-ray energy resolution values relative to previously reported PS/PVT examples. Fast scintillation decay properties have also been characterized in the prepared scintillators, rivaling the kinetics of stilbene-doped bibenzyl and BC-422Q-1% while providing higher light yields than these reference materials.

Feng, Patrick L.↗
DOE OSTI2014

Carrier Selective, Passivated Contacts for High Efficiency Silicon Solar Cells based on Transparent Conducting Oxides

We describe the design, fabrication and results of passivated contacts to n-type silicon utilizing thin SiO 2 and transparent conducting oxide layers. High temperature silicon dioxide is grown on both surfaces of an n-type wafer to a thickness <50 Å, followed by deposition of tin-doped indium oxide (ITO) and a patterned metal contacting layer. As deposited, the thin-film stack has a very high J0, contact , and a non-ohmic, high contact resistance. However, after a forming gas anneal, the passivation quality and the contact resistivity improve significantly. The contacts are characterized by measuring the recombination parameter of the contact (J0, contact ) and the specific contact resistivity (ρ contact ) using a TLM pattern. The best ITO/SiO 2 passivated contact in this study has J 0,contact = 92.5 fA/cm 2 and ρ contact = 11.5 mOhm-cm 2 . These values are placed in context with other passivating contacts using an analysis that determines the ultimate efficiency and the optimal area fraction for contacts for a given set of (J0, contact , ρ contact ) values. The ITO/SiO 2 contacts are found to have a higher J0, contact , but a similar ρ contact compared to the best reported passivated contacts.

14 SOLAR ENERGY↗
DOE OSTI2023

CO 2 Hydrogenation: Na Doping Promotes CO and Hydrocarbon Formation over Ru/m-ZrO 2 at Elevated Pressures in Gas Phase Media

Sodium-promoted monoclinic zirconia supported ruthenium catalysts were tested for CO 2 hydrogenation at 20 bar and a H 2 :CO 2 ratio of 3:1. Although increasing sodium promotion, from 2.5% to 5% by weight, slightly decreased CO 2 conversion (14% to 10%), it doubled the selectivity to both CO (~36% to ~71%) and chain growth products (~4% to ~8%) remarkably and reduced the methane selectivity by two-thirds (~60% to ~21%). For CO 2 hydrogenation during in situ DRIFTS under atmospheric pressure, it was revealed that Na increases the catalyst basicity and suppresses the reactivity of Ru sites. Higher basicity facilitates CO 2 adsorption, weakens the C–H bond of the formate intermediate promoting CO formation, and inhibits methanation occurring on ruthenium nanoparticle surfaces. The suppression of excessive hydrogenation increases the chain growth probability. Decelerated reduction during H 2 -TPR/TPR-MS and H 2 -TPR-EXAFS/XANES at the K-edge of ruthenium indicates that sodium is in contact with ruthenium. A comparison of the XANES spectra of unpromoted and Na-promoted catalysts after H 2 reduction showed no evidence of a promoting effect involving electron charge transfer.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Detection of Chemical Precursors of Explosives

Certain selected chemicals associated with terrorist activities are too unstable to be prepared in final form. These chemicals are often prepared as precursor components, to be combined at a time immediately preceding the detonation. One example is a liquid explosive, which usually requires an oxidizer, an energy source, and a chemical or physical mechanism to combine the other components. Detection of the oxidizer (e.g. H2O2) or the energy source (e.g., nitromethane) is often possible, but must be performed in a short time interval (e.g., 5 15 seconds) and in an environment with a very small concentration (e.g.,1 100 ppm), because the target chemical(s) is carried in a sealed container. These needs are met by this invention, which provides a system and associated method for detecting one or more chemical precursors (components) of a multi-component explosive compound. Different carbon nanotubes (CNTs) are loaded (by doping, impregnation, coating, or other functionalization process) for detecting of different chemical substances that are the chemical precursors, respectively, if these precursors are present in a gas to which the CNTs are exposed. After exposure to the gas, a measured electrical parameter (e.g. voltage or current that correlate to impedance, conductivity, capacitance, inductance, etc.) changes with time and concentration in a predictable manner if a selected chemical precursor is present, and will approach an asymptotic value promptly after exposure to the precursor. The measured voltage or current are compared with one or more sequences of their reference values for one or more known target precursor molecules, and a most probable concentration value is estimated for each one, two, or more target molecules. An error value is computed, based on differences of voltage or current for the measured and reference values, using the most probable concentration values. Where the error value is less than a threshold, the system concludes that the target molecule is likely. Presence of one, two, or more target molecules in the gas can be sensed from a single set of measurements.

Li, Jing↗
DOE OSTI2020

Single-Atom Electrocatalysts from Multivariate MOFs for Highly Selective Reduction of CO 2 at Low Pressures

Single-atom catalysts (SACs) are of great interest because of their ultrahigh activity and selectivity. However, it is difficult to construct model SACs according to a general synthetic method, and therefore, discerning differences in activity of diverse single-atom catalysts is not straightforward. Herein, a general strategy for synthesis of single-atom metals implanted in N-doped carbon (M 1 -N-C; M=Fe, Co, Ni and Cu) has been developed starting from multivariate metal–organic frameworks (MOFs). The M 1 -N-C catalysts, featuring identical chemical environments and supports, provided an ideal platform for differentiating the activity of single-atom metal species. When employed in electrocatalytic CO 2 reduction, Ni 1 -N-C exhibited a very high CO Faradaic efficiency (FE) up to 96.8 % that far surpassed Fe 1 -, Co 1 - and Cu 1 -N-C. Remarkably, the best-performer, Ni1-N-C, even demonstrated excellent CO FE at low CO 2 pressures, thereby representing a promising opportunity for the direct use of dilute CO 2 feedstock.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Titanium-, Nitrogen-Doped Carbon Flowers Catalyze Electrochemical Nitrate Reduction Reaction to Ammonia

An emerging design heuristic for electrochemical nitrate reduction (NO 3 RR) catalysts is synthesizing electron-deficient sites to facilitate binding of electron-rich NO 3 – . However, this rule has rarely been applied to metal-, nitrogen-doped carbon (MNC) catalysts. Titanium (Ti), with low electronegativity and high NO 3 RR reactivity, is a compelling MNC candidate. To date, atomically dispersed TiN x motifs have eluded synthesis due to the strong oxophilicity of Ti. Here, in this work, we leverage nitrogen-rich carbon flowers (CF) to overcome synthetic challenges and produce Ti-, N-doped carbon flower (TiCF) catalysts. Advanced materials characterization demonstrates that TiCF catalysts are a mixed phase material with 3/4 of Ti atoms in TiO 2 -like nanoparticles and 1/4 of Ti atoms in novel, atomically dispersed TiN x sites. TiCF achieves 61 ± 7% NH 3 -selectivity at −0.70 V vs RHE and 14 ± 5 mA/cm 2 to NH 3 formation (| j NH 3 |) at −0.85 V vs RHE in (0.1 M NaOH + 0.1 M NaNO 3 + 0.45 M Na 2 SO 4 ) electrolyte. Control studies show both CF morphology and Ti sites are essential for high NO 3 RR activity. Density functional theory calculations attribute the NO3RR reactivity to TiN x , which facilitates multiple bond formation with surface intermediates to promote favorable NH3 synthesis pathways. Thus, TiCF exhibits 60× higher | j NH 3 | values than bulk Ti and NH 3 yield rates (>0.06 mmol NH 3 /h/cm 2 ) that are competitive with state-of-the-art MNC catalysts (e.g., FeNC, CuNC). TiCF introduces a new class of Ti electrocatalysts, advancing the MNC design space and sustainable NH 3 production.

ammonia↗