Tracking Initial Fe(II)-Driven Ferrihydrite Transformations: A Mössbauer Spectroscopy and Isotope Investigation
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “solution transfer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Elliptical ejecta of asteroid Dimorphos is due to its surface curvature
Kinetic deflection is a planetary defense technique delivering spacecraft momentum to a small body to deviate its course from Earth. The deflection efficiency depends on the impactor and target. Among them, the contribution of global curvature was poorly understood. The ejecta plume created by NASA’s Double Asteroid Redirection Test impact on its target asteroid, Dimorphos, exhibited an elliptical shape almost aligned along its north-south direction. Here, we identify that this elliptical ejecta plume resulted from the target’s curvature, reducing the momentum transfer to 44 ± 10% along the orbit track compared to an equivalent impact on a flat target. We also find lower kinetic deflection of impacts on smaller near-Earth objects due to higher curvature. A solution to mitigate low deflection efficiency is to apply multiple low-energy impactors rather than a single high-energy impactor. Rapid reconnaissance to acquire a target’s properties before deflection enables determining the proper locations and timing of impacts.
79 ASTRONOMY AND ASTROPHYSICS↗
ORNL Campus Sustainability and Decarbonization using Waste Heat Recovery from the Oak Ridge Leadership Computing Facility’s High-Performance Computing Data Center
Heat pumps are a clean and efficient technology that can be powered by renewable electricity to transfer heat using a refrigerant from one place to another by different heat sources, making buildings clean and environmentally friendly. With the support of the ORNL Laboratory Modernization Division, this project explored and evaluated an innovative solution that uses water-water cost-effective midtemperature heat pump (MTHP) technology to leverage the low-grade waste heat from ORNL Frontier and the data center to deliver 85°C hot water, which replaces hot steam generated using natural gas combustion boilers for water heating or space heating in the buildings of ORNL campus. Two scenarios were studied. In the first scenario, which considered the 5600-5700-5800 complex only, Carrier’s commercial 1,000 kW MTHP technology achieves more than 6,640 MWh/year energy savings, an emission reduction of 858 TCO2e/year CO2, and a payback time of 4.85 years. In the second scenario, which considered the 5600-5700-5800 complex and Buildings 5100, 5200, and 5300, the CO2 emission reduction is 1,483 TCO2e/year, the operating cost savings are $0.21 million annually, and the payback time is 3.74 years. Additionally, a comprehensive HP ShowCase Tool was developed for evaluating the optimal solution to improve sustainability and decarbonization of the buildings on the ORNL campus. The tool is an Excel-based tool integrated with VBA (Visual Basic for Applications) coding. The tool includes collected ORNL campus building information and an MTHP library, which comprises collected commercial and ORNL-defined MTHPs. The tool was used to evaluate the sustainability and decarbonization of the ORNL campus. The tool can be widely used or referenced for heat pump solutions and building decarbonization renovation strategies to modernize ORNL facilities and energy use–intensive equipment to enable efficient, sustainable, and resilient operations in the future.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Bench-Scale Electrolytic Dissolution of Quarter-Scale FCA Cans
In 2016, the Savannah River National Laboratory (SRNL) led, in support of and under sponsorship of the Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Office of Material Management and Minimization (M3), the removal and transfer of the plutonium based Fast Critical Assembly (FCA) fuel from the Japan Atomic Energy Agency (JAEA) Tokai facility to the Savannah River Site (SRS). The team also included JAEA, multiple organizations in Savannah River Nuclear Solutions (SRNS), International Nuclear Services, and many other entities. The FCA fuel removal project completion was a key deliverable for M3 to the 2016 Nuclear Security Summit and constituted the largest inventory of weapons-usable plutonium removed under the nonproliferation program. The FCA materials consist of thousands of stainless steel (SS) clad plates and hundreds of SS clad rods. The FCA fuel elements were packaged in a carrier can and stored at SRS pending disposition of the fuel. Following an assessment of candidate disposition options, SRNS identified electrolytic dissolution (ED) as the most promising disposition option for the FCA plates and their preferred option was endorsed by DOE. This option entails electrochemically dissolving the entire FCA carrier can with fuel elements and was based on bench-scale laboratory testing and historical work on processing SS-clad and zirconium-clad uranium-based fuel in the H-Canyon electrolytic dissolver (last operated in 1980). The FCA plate consists of a plutonium-aluminum metal alloy core hermitically sealed in SS cladding.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
An Overview of Potential Future Aviation Energy Carriers
Global jet fuel demand is projected to grow to 165 billion gallons by 2050 and there is growing interest in the aviation industry to understand the capabilities of alternative energy carriers. This report considers several potential energy carriers, reviewing their production potential, operational considerations, and economic implications to inform potential next steps in aeronautics research. The following energy carriers (i.e., fuels) were evaluated in this study for future use in aviation: sustainable aviation fuel (SAF) - both biomass-based and power-to-liquids (PtL) - based SAF - cryogenic hydrogen (LH 2 ) - also known as liquid hydrogen - liquefied natural gas (LNG), liquefied ethane (LE), and Jet X. The barriers and opportunities for the evaluated energy carriers vary. SAF is a commercially available drop-in fuel compatible with existing aircraft and infrastructure. SAF is limited by both higher prices and slow commercialization of multiple pathways using different feedstocks necessary to significantly grow supply. Cryogenic fuels, in contrast, have very different thermal, physical, and chemical properties than SAF and Jet A, requiring the construction of new airport storage and dispensing infrastructure and the design of new aircraft energy systems capable of mitigating heat transfer and boil-off. Cryogenic fuels offer an opportunity to diversify aviation fuel carriers from domestic energy relevant for both energy security and resilience. This means cryogenic fuels are more of a longer-term solution for aircraft but are worth exploring for potential future cost savings and emissions benefits. Jet X refers to non-drop-in liquid hydrocarbon fuels in the early stages of investigation seeking favorable properties. There are substantial barriers to non-drop-in liquid aviation fuels that are not compatible with existing aircraft and fuel infrastructure.
33 ADVANCED PROPULSION SYSTEMS↗
NSFnets (Navier-Stokes flow nets): Physics-informed neural networks for the incompressible Navier-Stokes equations
In the last 50 years there has been a tremendous progress in solving numerically the Navier-Stokes equations using finite differences, finite elements, spectral, and even meshless methods. Yet, in many real cases, we still cannot incorporate seamlessly (multi-fidelity) data into existing algorithms, and for industrial-complexity applications the mesh generation is time consuming and still an art. Moreover, solving ill-posed problems (e.g., lacking boundary conditions) or inverse problems is often prohibitively expensive and requires different formulations and new computer codes. Here, we employ physics-informed neural networks (PINNs), encoding the governing equations directly into the deep neural network via automatic differentiation, to overcome some of the aforementioned limitations for simulating incompressible laminar and turbulent flows. We develop the Navier-Stokes flow nets (NSFnets) by considering two different mathematical formulations of the Navier-Stokes equations: the velocity-pressure (VP) formulation and the vorticity-velocity (VV) formulation. Since this is a new approach, we first select some standard benchmark problems to assess the accuracy, convergence rate, computational cost and flexibility of NSFnets; analytical solutions and direct numerical simulation (DNS) databases provide proper initial and boundary conditions for the NSFnet simulations. The spatial and temporal coordinates are the inputs of the NSFnets, while the instantaneous velocity and pressure fields are the outputs for the VP-NSFnet, and the instantaneous velocity and vorticity fields are the outputs for the VV-NSFnet. This is unsupervised learning and, hence, no labeled data are required beyond boundary and initial conditions and the fluid properties. The residuals of the VP or VV governing equations, together with the initial and boundary conditions, are embedded into the loss function of the NSFnets. No data is provided for the pressure to the VP-NSFnet, which is a hidden state and is obtained via the incompressibility constraint without extra computational cost. Unlike the traditional numerical methods, NSFnets inherit the properties of neural networks (NNs), hence the total error is composed of the approximation, the optimization, and the generalization errors. Here, we empirically attempt to quantify these errors by varying the sampling (“residual”) points, the iterative solvers, and the size of the NN architecture. For the laminar flow solutions, we show that both the VP and the VV formulations are comparable in accuracy but their best performance corresponds to different NN architectures. The initial convergence rate is fast but the error eventually saturates to a plateau due to the dominance of the optimization error. For the turbulent channel flow, we show that NSFnets can sustain turbulence at , but due to expensive training we only consider part of the channel domain and enforce velocity boundary conditions on the subdomain boundaries provided by the DNS data base. We also perform a systematic study on the weights used in the loss function for balancing the data and physics components, and investigate a new way of computing the weights dynamically to accelerate training and enhance accuracy. In the last part, we demonstrate how NSFnets should be used in practice, namely for ill-posed problems with incomplete or noisy boundary conditions as well as for inverse problems. We obtain reasonably accurate solutions for such cases as well without the need to change the NSFnets and at the same computational cost as in the forward well-posed problems. As a result, we also present a simple example of transfer learning that will aid in accelerating the training of NSFnets for different parameter settings.
97 MATHEMATICS AND COMPUTING↗
Modeling the Ultrafast Electron Attachment Dynamics of Solvated Uracil
Electron attachment to DNA by low energy electrons can lead to DNA damage, so a fundamental understanding of how electrons interact with the components of nucleic acids in solution is an open challenge. In solution, low energy electrons can generate presolvated electrons, e pre – , which are efficiently scavanged by pyrimidine nucleobases to form transient negative ions, able to relax to either stable valence bound anions or undergo dissociative electron detachment or transfer to other parts of DNA/RNA leading to strand breakages. In order to understand the initial electron attachment dynamics, this paper presents a joint molecular dynamics and high-level electronic structure study into the behavior of the electronic states of the solvated uracil anion. Both the valence π* and nonvalence e pre – states of the solvated uracil system are studied, and the effect of the solvent environment and the geometric structure of the uracil core are uncoupled to gain insight into the physical origin of the stabilization of the solvated uracil anion. As a result, solvent reorganization is found to play a dominant role followed by relaxation of the uracil core.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Insights into lithium ion deposition on lithium metal surfaces
Lithium metal is among the most promising anodes for the next generation of batteries due to its high theoretical energy density and high capacity. Challenges such as extreme reactivity and lithium dendrite formation have kept lithium metal anodes away from practical applications. However, the underlying mechanisms of Li ion deposition from the electrolyte solution onto the anode surface are still poorly understood due to their inherent complexity. In this work, density functional theory calculations and thermodynamic integration via constrained molecular dynamics simulations are conducted to study the electron and ion transfer between lithium metal slab and the electrolyte in absence of an external field. Here, we explore the effect of the solvent chemistry and structure, distance of the solvated complex from the surface, anion–cation separation, and concentration of Li-salts on the deposition of lithium ions from the electrolyte phase onto the surface. Ethylene carbonate (EC), 1,2-dimethoxyethane (DME), 1,3-dioxolane (DOL), and mixtures of them are used as solvents. These species compete with the salt anion and the Li cation for electron transfer from the surface. It is found that the structure and properties of the solvation shell around the lithium cation has a great influence on the ability of the cation to diffuse as well as on its surrounding electron environment. DME molecules allow easier motion of the lithium ion compared with EC and DOL molecules. The slow growth approach allows the study of energy barriers for the ion diffusion and desolvation during the deposition pathway. This method helps elucidating the underlying mechanisms on lithium-ion deposition and provides a better understanding of the early stages of Li nucleation.
25 ENERGY STORAGE↗
A simple vacuum suitcase for enabling plasma facing component characterization in fusion devices
We have demonstrated a vacuum suitcase to transport samples in vacuo to a surface analysis station for characterization of tokamak plasma facing components (PFCs). This technique enables surface analysis at powerful, dedicated stations that are not encumbered by design constraints imposed on them by a tokamak. The vacuum suitcase is an alternative solution to characterizing PFCs using diagnostics that are designed and built around a tokamak. The vacuum suitcase, called the Sample Exposure Probe (SEP), features mobile ultra-high vacuum pumping. Active pumping under high vacuum enables sample transfer between the Lithium Tokamak eXperiment-β (LTX-β) and a high resolution X-ray Photoelectron Spectroscopy (XPS) system that is situated close by. A thermocouple inserted in the back of the sample head measures heat flux from the plasma during exposure, and together with a button heater, allows the sample to match the LTX-β PFCs in high temperature operations. As vacuum conditions are better during transfer and analysis than in the tokamak, less contamination is introduced to the samples. XPS scans on a dedicated analysis station enable peak identification due to higher resolution and signal to noise ratio. A similar probe could be implemented for other fusion devices. As a result, the SEP is the first vacuum suitcase implementation for fusion applications that incorporates active pumping.
47 OTHER INSTRUMENTATION↗
Minkowski vacuum entanglement and accelerated oscillator chains
Minkowski vacuum is empty from the perspective of Unruh-Minkowski photons, however, in the Rindler picture, it is filled with entangled pairs of Rindler photons. A ground-state atom uniformly accelerated through Minkowski vacuum can become excited by absorbing a Rindler photon (Unruh effect) or, in the alternative description, by emitting an Unruh-Minkowski photon (Unruh-Wald effect). We find an exact solution for the quantum evolution of a long chain of harmonic oscillators accelerated through Minkowski vacuum and for two chains accelerated in the opposite directions. We show how entanglement of Rindler photons present in Minkowski vacuum is transferred to the oscillators moving in causally disconnected regions. We also show that in the Unruh-Minkowski photon picture the process can be interpreted as if initial correlations between collective oscillator modes are transferred to the generated Unruh-Minkowski photons. Published by the American Physical Society 2025
Svidzinsky, Anatoly A. (ORCID:0000000247756767)↗
A Study of Ferrocene Diffusion in Toluene/Tween 20/1-Butanol/Water Microemulsions for Redox Flow Battery Applications
Redox flow batteries (RFBs) possess multiple advantages as a flexible energy storage solution. However, RFB researchers are still facing many challenges in finding an appropriate electrolyte. Microemulsions have recently been proposed as a promising alternative RFB electrolyte because of their ability to accommodate organic redox species with fast electron transfer rates that are not soluble in aqueous phase, while still offering the high conductivity of an aqueous salt electrolyte. In this work, we focused on understanding the transport of ferrocene (Fc) in a toluene/Tween 20/1-butanol/water model microemulsion and studied the compositional influence on Fc diffusion. The results show that Fc redistributes among the oil, surfactant, and water microenvironments, and the corresponding diffusion and partition coefficients are quantified. Thus, a tortuous path diffusion model is proposed to describe the mass transport of Fc to an electrode surface. Diffusion coefficients are also obtained by pulsed-field gradient nuclear magnetic resonance (PFG NMR), while the values for Fc diffusion are substantially higher than those from electrochemical measurements, suggesting that they measure samples in different ways. The current contributions from each microenvironment indicate that the Fc permeability is much higher in the oil, even though the electron transfer reaction is likely occurring in the surfactant.
25 ENERGY STORAGE↗
Glycolate Analysis in Tank 22: Developing and Testing Analytical Methods for the Savannah River Site Liquid Waste System
Researchers developed and tested a range of techniques to support a low mg/L Limit of Quantitation (LOQ) of glycolate in radioactive Tank 22 waste solution by Ion Chromatography (IC) and by proton NMR. For the IC method, Dionex OnGuard II cartridges were tested as a means of removing alkali earth and transition metals that can interfere during ion chromatography applications especially when analyzing for low-concentration, chelating analytes. Additionally, concentrations of nitrate in the raw Tank 22 sample (5,000 to 10,000 mg/L) were managed by using reasonable levels of sample dilution. The resulting IC performance quality was enhanced by improving the baseline, increasing sensitivity [Limit of Quantitation (LOQ) of 12 mg/L and Limit of Detection (LOD) of 4.0 mg/L], and resolving analytes into well-defined Gaussian peaks when using the Dionex OnGuard II H⁺ cartridges to remove matrix interferences. High concentrations of nitrate limited the performance of the IC method. To achieve an acceptable baseline, samples with high nitrate content require more dilution, resulting in higher detection limits. Tests on samples with higher concentrations of nitrate (Tank 30 and 32 supernate with approximately 150000 mg/L nitrate) suggested that IC detection limits for glycolate in these samples would be > 500 mg/L. Thus, an LOQ of 12 mg/L is not feasible by this IC method on evaporator feed samples. An alternative method of glycolate analysis, using proton nuclear magnetic resonance (H NMR), was developed by the research team. In initial tests, the H NMR technique provided reasonable quantitation of glycolate in Tank 22 conditions by direct observation of the liquid. The H NMR method may provide improved detection limits for solutions with higher nitrate concentrations. We recommend further development of this analysis for high nitrate LWS samples such as evaporator feed and evaporator drop tank content. A method for pretreatment of samples using crystalline silicotitanate (CST) was developed and tested. The objective of the pretreatment was to facilitate analysis of samples with higher levels of radioactivity. The pretreatment did not influence the glycolate concentration in solution, and the pretreatment is projected to reduce Cs 137 activity in a sample by a factor of 16,200. The double strike CST pretreatment was demonstrated and would allow milliliters of higher activity samples to be transferred from the Shielded Cells and handled in a containment unit for glycolate analysis. The various studies validated IC and H NMR methods for glycolate analysis, defined the range of applicability, and demonstrated key supporting analytical protocols. Based on the results, high quality glycolate analysis of Tank 22 is feasible down to approximately 12 mg/L, with the potential for broader applicability of the methods to other conditions in the Savannah River Site Liquid Waste System (LWS).
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Generalization Equations for Machine Learners Based on Physical and Abstract Laws
The physical and abstract laws derived from the first principles have been recently exploited to customize and sharpen machine learning (ML) methods and also derive their generalization equations. These laws often encapsulate knowledge that complements datasets and ML models. We present a generic framework that uses these laws to provide ML codes that are transferable across multiple areas, including data transport infrastructures and thermal hydraulics analytics of nuclear reactors. By anchoring on datasets from these areas and the statistical generalization theory, we present a rigorous approach to co-develop ML solutions and the generalization equations that characterize them, by exploiting the structure and constraints from the laws. We present illustrative examples using practical problems from existing literature on the performance characterization of data transport infrastructures, and the sensor error and power level estimation in nuclear reactor systems using sensor measurements of primary and secondary coolant systems, respectively.
Rao, Nageswara↗
Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization
Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.
Gao, Xun [Cornell Univ., Ithaca, NY (United States↗
Demystifying the Stern layer at a metal–electrolyte interface: Local dielectric constant, specific ion adsorption, and partial charge transfer
Electric double layer (EDL) represents one of the most basic concepts in electrochemistry and is pertinent to diverse engineering applications ranging from electrocatalysis to energy storage. Whereas phenomenological and coarse-grained models have been long established to describe ionic distributions in the diffuse layer, a faithful prediction of the physicochemical properties of the electrode–electrolyte interface from a molecular perspective remains a daunting challenge. In this work, we investigate the charging behavior of an Ag (111) electrode in NaF aqueous solutions leveraging experimental results and theoretical calculations based on the classical density functional theory for ion distributions in the diffuse layer and on the joint density functional theory (JDFT) for the electronic structure. When the Ag electrode is applied with a negative voltage, the surface charge density can be reasonably described by assuming a neutral Stern layer with the dielectric constant dependent on the local electric field as predicted by the Kirkwood equation. However, the specific adsorption of F− ions must be considered when the electrode is positively charged and the fluoride adsorption can be attributed to both physical and chemical interactions. Qualitatively, F− binding and partial charge transfer are supported by JDFT calculations, which predict an increased binding energy as the voltage increases. Our findings shed insight on the molecular characteristics of the Stern layer and the charge behavior of adsorbed species not specified by conventional EDL models.
Wang, Xuepeng (ORCID:0000000285704546)↗
Mosaic Cu I –Cu II –In III 2D Perovskites: Pressure–Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method
The perovskite (BA) 4 [Cu II (Cu I In III ) 0.5 ]Cl 8 (1 BA ; BA + =butylammonium) allows us to study the high-pressure structural, optical, and transport properties of a mixed-valence 2D perovskite. Compressing 1 BA reduces the onset energy of Cu I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1 BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu II perovskites achieve similar conductivity at ≈50 GPa. The solution-state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. Finally, to circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu II single perovskites and Cu I In III double perovskites.
2D perovskite↗
N‐Doping Effects On Electrocatalytic Water Splitting of Non‐Noble High‐Entropy Alloy Nanoparticles Prepared by Inert Gas Condensation
Abstract The unique catalytic activities of high‐entropy alloys (HEAs) emerge from the complex interaction among different elements in a single‐phase solid solution. As a “green” nanofabrication technique, inert gas condensation (IGC) combined with laser source opens up a highly efficient avenue to develop HEA nanoparticles (NPs) for catalysis and energy storage. In this work, the novel N‐doped non‐noble HEA NPs are designed and successfully prepared by IGC. The N‐doping effects of HEA NPs on oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are systematically investigated. The results show that N‐doping is conducive to improving the OER, but unfavorable for HER activity. The FeCoNiCrN NPs achieve an overpotential of 269.7 mV for OER at a current density of 10 mA cm −2 in 1.0 M KOH solution, which is among the best reported values for non‐noble HEA catalysts. The effects of the differences in electronegativity, ionization energy and electron affinity energy among mixed elements in N‐doped HEAs are discussed as inducing electron transfer efficiency. Combined with X‐ray photoelectron spectroscopy and the extended X‐ray absorption fine structure analysis, an element‐design strategy in N‐doped HEAs electrocatalysts is proposed to improve the intrinsic activity and ameliorate water splitting performance.
Chemistry↗
Mechanisms of Asymmetric Membrane Formation in Nonsolvent-Induced Phase Separation
We report the first simulations of nonsolvent-induced phase separation (NIPS) that predict membrane microstructures with graded asymmetric pore size distribution. In NIPS, a polymer solution film is immersed in a nonsolvent bath, enriching the film in nonsolvent, and leading to phase separation that forms a solid polymer-rich membrane matrix and polymer-poor membrane pores. We demonstrate how mass-transfer-induced spinodal decomposition, thermal fluctuations, and glass-transition dynamics implemented with mobility contrast between the polymer-rich and polymer-poor phases are essential to the formation of asymmetric membrane microstructures. Specifically, we show that the competition between the propagation of the phase-separation and glass-transition fronts determines the degree of pore-size asymmetry. In conclusion, we also explore the sensitivity of these microstructures to the initial film composition, and compare their formation in 2D and 3D.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗