Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Spring Deposits on Mars: Physical Processes from Terrestrial Analogs

An important first step in the current Mars exploration strategy is the detection of sites where there is evidence for past or present near-surface water on Mars. This study evaluates the large-scale morphology of spring deposits and the physical processes of their formation, growth, and evolution in terms that relate to (1) their identification in image data, (2) their formation, evolution, and preservation in the environment of Mars, and (3) their potential as sites of long-term or late stage shallow groundwater emergence at the surface of Mars.

Crumpler, L. S.↗

Nanoporous Silicon Carbide for Nanoelectromechanical Systems Applications

A major goal of this project is to produce porous silicon carbide (PSiC) via an electroless process for eventual utilization in nanoscale sensing platforms. Results in the literature have shown a variety of porous morphologies in SiC produced in anodic cells. Therefore, predictability and reproducibility of porous structures are initial concerns. This work has concentrated on producing morphologies of known porosity, with particular attention paid toward producing the extremely high surface areas required for a porous flow sensor. We have conducted a parametric study of electroless etching conditions and characteristics of the resulting physical nanostructure and also investigated the relationship between morphology and materials properties. Further, we have investigated bulk etching of SiC using both photo-electrochemical etching and inductively-coupled-plasma reactive ion etching techniques.

Hossain, T.↗

Largest impact features on Venus: Non-preserved or non-recognizable?

Conventional explanation of a lack of impact craters with diameters greater than 300 km on Venus is that they formed during the intense bombardment era and had lunar-like morphology, but they are not preserved now because of rapid viscous relaxation of their topograpy and/or high endogenous reworking of surface. Other explanation invokes failure to recognize these larger craters because of their non-lunar-like morphology from the moment of formation, since larger gravity of Venus relatively to the Moon results in that largest craters on Venus may form within the mass of shock melted material while comparably sized lunar craters would be still almost 'dry'. To test this hypothesis, morphologies and rim-crest diameters of the largest peak-ring and Orientale-type basins and all larger impact features on Moon, Mercury, Mars, and Venus were compiled and compared to rim crest diameters of model craters with different melt volume/transient-cavity volume ratios. Results show that the final diameters of model craters formed at depth of melting about twice of transient cavity depth correspond to changeover from a planet-similar morphology of all the smaller basins on any terrestrial planet to a planet-specific morphology of all the larger basins on the Moon, Mercury, and Mars. On Venus, these largest impact features are not found and instead, a Venus-specific morphology of the largest concentric coronae appears in this size range. The coronae were suggested to form over sites of mantle upwelling and modified by subsequent volcanism and gravitational relaxation. The results here suggest that mantle upwelling - the first and necessary step of the corona formation models - may be induced by impact event (as a result of transient cavity collapse) and operated under cover of hot, slowly cooled impact melt in the areas of thinned crust and/or thermally active regions.

Nikolaeva, Olga V.↗

Multipurpose Fiber Injected-micro-spherical LIDAR System

A technological revolution is occurring in the field of fiber lasers. Over the past two years, the level of power has increased from approx. 100 watts to nearly 1 kilowatt. We are developing a novel fiber laser system, which is a satellite-based LIDAR transmitter of multi-lines. The system is made of a hollow fiber filled with micro-spheres doped with lasing materials. Each sphere has its inherent optical cavity, which makes the system a cavity free and in the same time, emits multi-laser lines for simultaneous multi-task operations. The system is also rugged, compact, lightweight, and durable. Our earlier studies on micro-spheres doped with different laser dyes demonstrated the emission of extremely fine laser lines of less than 3 A line-width, which are of interest for spectroscopic applications, sensing, imaging, and optical communications. Individual dye-doped micro-spheres demonstrated a lasing resonance peaks phenomenon in their fluorescence spectra of linear and nonlinear features that do not exist in the bulk dye solutions. Each individual micro-sphere acts as a laser system with inherent cavity, where the fluorescence line suffers multiple internal reflections within the micro-sphere and gains enough energy to become a laser line. Such resonance peaks are dependent on the sphere's morphology, size, shape, and its refractive index. These resonance peaks are named structural resonance, whispering modes or whispering gallery modes, creeping waves, circumferential waves, surfaces modes, and virtual modes. All of these names refer to the same phenomenon of morphology dependent resonance (MDR), which has already been described and predicted precisely by electromagnetic theory and Lorentz-Mie theory since 1908. The resonance peaks become more obvious when the particle size approaches and exceeds the wavelength of the laser used and the relative index of the particle is greater than that of the surrounding medium. Additional information is included in the original extended abstract.

Abdelayem, Hossin↗

Geology and cratering history of Ariel

The surface of Ariel imaged by Voyager 2 can be divided into several types of terrain on the basis of morphology: cratered terrain, subdued terrain, ridged terrain, and plains. Crater statistics were compiled for each of the terrain types. Despite differing morphology, the various terrains on Ariel do not exhibit large variations in crater frequency. None of the observed surfaces on Ariel record the period of accretion. It seems that conditions appropriate for resurfacing could have occurred during the early history of Ariel.

Plescia, J. B.↗

Surface areas and porosities of ices used to simulate stratospheric clouds

Surface areas, bulk densities, and porosities of ices formed at 85 or 200 K are measured to study the morphology of the vapor-deposited ices that have been used to simulate ice clouds in the laboratory. Surface areas are measured from the Brunauer, Emmett, and Teller (BET) analysis of absorption isotherms obtained at 72.2 K. Bulk densities and porosities are determined photogrammetrically. Results show that water ice and HNO3-H2O ice films deposited from the vapor at temperatures below 200 K exhibit large BET surface areas and are highly porous. For the ices annealed at temperatures above 200 K, external surface areas calculated from the observed particle sizes agree reasonably well with the BET areas, which indicates that the annealed ices are composed of nonporous particles and that the porosity of these ices is due to interstices among the particles.

Keyser, Leon F.↗

Mineralogical Signatures of Mars-Analog Eskers in Iceland

Orbital geomorphic observations of the martian surface suggest glaciers were present during much of Mars’ history. Amazonian- and Hesperian-aged lobate and viscous flow features and moraines, some of which retain remnant ice deposits, are typically interpreted as evidence for cold-based glaciation. There is some morphological evidence for wet-based glaciation, however, and the Late Noachian Icy Highlands model, in which melting of glaciers is hypothesized to create valley networks, would have generated features characteristic of wet-based glaciers, like eskers. Furthermore, recent work suggests lower gravity on Mars promoted subglacial water drainage, leading to channels and eskers. There is a paucity of morphological and compositional measurements of subglacial landforms on Earth to provide comparison to putative subglacial features on the martian surface, like eskers. Our group is studying the morphology, sedimentology, and composition of eskers formed in Iceland to identify characteristics of these features that will help determine whether sinuous ridges on Mars are ancient eskers. Here, we report on the mineralogy of eskers that were sampled during our summer 2022 field campaign and evaluate whether there is a mineralogical signature of eskers that is distinct from surrounding glacial outwash plains

E B Rampe↗

Developing Materials and Coating Technologies for Mitigation of Lunar Dust Adhesion and Abrasion

In order to support long duration missions on the Moon’s surface, materials resistant to the harsh lunar environment are critically needed. Lunar dust poses a major threat to the durability of components and vehicles due to its fine, jagged morphology and highly abrasive nature, which enables the particles to adhere and embed into surfaces of components and devices potentially leading to premature failure. Consequently, significant effort within NASA aims to develop novel materials and coating technologies to limit lunar dust adhesion and abrasion by exploring a variety of production routes and examining properties of candidate material systems, including ceramic, metallic and polymeric. Manufacturing methods investigated include traditional powder processing, additive manufacturing and surface modification via laser ablation patterning of bulk materials and coatings. An overview of ongoing NASA materials and coating research and development to enable lunar exploration will be presented.

Materials↗

Advances in Planetary Geology

The surface of Mars displays a broad range of channel and valley features. There is as great a range in morphology as in scale. Some of the features of Martian geography are examined. Geomorphic mapping, crater counts on selected surfaces, and a detailed study of drainage basins are used to trace the geologic evolution of the Margaritifer Sinus Quandrangle. The layered deposits in the Valles Marineris are described in detail and the geologic processes that could have led to their formation are analyzed.

Grant, John A., III↗

Surface brightness and color distributions in blue compact dwarf galaxies. I - Haro 2, an extreme example of a star-forming young elliptical galaxy

The first results of a large-scale program to study the morphology and structure of blue compact dwarf galaxies from CCD observations are presented. The observations and reduction procedures are described, and surface brightness and color profiles are shown. The results are used to discuss the morphological type of Haro 2 and its stellar populations. It is found that Haro 2 appears to be an extreme example of an elliptical galaxy undergoing intense star formation in its central regions, and that the oldest stars it contains were made only about four million yr ago. The 'missing' mass problem of Haro 2 is also discussed.

Loose, Hans-Hermann↗

Possible Analogs for Small Valleys on Mars at the Haughton Impact Crater Site, Devon Island, Canadian High Arctic

Small valleys are perhaps the clearest evidence for an aqueous past on Mars. While small valley formation has occurred even in Amazonian times, most small valleys on Mars are associated with the heavily cratered Noachian terrains. Martian small valleys are often cited as evidence for a putative warmer and wetter climate on Early Mars in which rain and subsequent surface runoff would have acted as significant erosional agents, but the morphology of many small valleys has at the same time been recognized as having several unusual characteristics, making their origin still enigmatic and climatic inferences from them uncertain. Meanwhile, martian climate modeling efforts have been facing difficulties over the past decades with the problem of making the early martian climate warm enough to achieve temperature above 273 K to allow rainfall and the sustained flow of liquid water at the martian surface.

Lee, P.↗

Surface chemistry and wear behavior of single-crystal silicon carbide sliding against iron at temperatures to 1500 C in vacuum

X-ray photoelectron and Auger electron spectroscopy analyses and morphological studies of wear and metal transfer were conducted with a single-crystal silicon carbide 0001 surface in contact with iron at various temperatures to 1500 C in a vacuum of 10 to the minus 8th power pascal. The results indicate that below 800 C, carbide-carbon and silicon are primarily seen on the silicon carbide surface. Above 800 C the graphite increases rapidly with increase in temperature. The outermost surficial layer, which consists mostly of graphite and little silicon at temperatures above 1200 C is about 2 nm thick. A thicker layer, which consists of a mixture of graphite, carbide, and silicon is approximately 100 nm thick. The closer the surface sliding temperature is to 800 C, the more the metal transfer produced. Above 800 C, there was a transfer of rough, discontinuous, and thin iron debris instead of smooth, continuous and thin iron film which was observed to transfer below 800 C. Two kinds of fracture pits were observed on the silicon carbide surface: (1) a pit with a spherical asperity; and (2) multiangular shaped pits.

Miyoshi, K.↗

Probing Supraglacial Debris on Mars 1: Sources, Thickness, and Stratigraphy

Geomorphic and geophysical evidence supports a debris-covered glacier origin for a suite of landforms at themid-latitudes of Mars, including lobate debris aprons (LDA), lineated valley fill (LVF), and concentric crater fill (CCF). These large reservoirs of ice and their near-surface structure provide a rich record for understanding the planet's climate and history of global volatile exchange over the past billion years. LDA, LVF, and CCF are also potential sites for future robotic and human missions but the accessibility of glacial ice for direct sampling and in situ resource utilization depends largely on the geotechnical properties of the surface debris ("supraglacial debris"), including its thickness, grain sizes, and density structure. The physical properties of this supraglacial debris layer have been poorly constrained. We use images of morphology, digital elevation models, thermal inertia data, and radar sounding data to probe the near surface of LDA, LVF, and CCF in Deuteronilus Mensae in order to place constraints on the sources, grain sizes, thickness, and stratigraphy of supraglacial debris. We find evidence for at least a two-layer stratigraphy. Layered mantle consisting of atmospherically emplaced dust and ice superposes boulder-rich sediment sourced by rockfalls glacially transported downslope. High thermal inertia, boulder-rich termini and debris bands reminiscent of medial moraines are found throughout the study region, supporting a rockfall origin for at least a fraction of the debris exposed at the surface. This supraglacial debris layer would have thickened with time from sublimation of glacial ice and liberation of englacial sediment and dust. At present, the entire supraglacial debris package is a minimum of a few meters in thickness and is likely tens of meters in thickness in many locations, possibly thinning regionally at lower latitudes and locally thinning toward the headwalls. The lack of terracing or interior structures in craters formed within LDA, LVF, and CCF and the absence of near-surface reflectors in SHARAD radar data further suggest that no strong contrasts in

Supraglacial↗

Analyzing the Ages of South Polar Craters on the Moon: Implications for the Sources and Evolution of Surface Water Ice

Surface water ice in the permanently shadowed polar regions of the Moon has a patchy surficial distribution and is not found within all available cold-trapping areas. To date it is not well understood when the ice was delivered, which has important implications for the surficial characteristics of the ice as well as for possible delivery mechanisms. Here we present absolute model ages for 20 south polar craters that host surface water ice, providing maximum estimates of the ages of surface ice contained within these craters. We quantify the amount of available cold-trapping surface area that is occupied by water ice in order to examine the relationship between the patchiness of ice within each crater and the age of each host crater. The majority of surface ice is contained in old craters ≥∼3.1 Gyr, where the majority of cold-trapping area on the pole exists. The ice is these ancient craters is very patchy in surficial distribution, occupying <11.5% of cold-trapping surface area available in individual craters. This patchy distribution of ice in old craters is likely to be due to impact bombardment and regolith overturn within the polar regions. Interestingly, surface ice is also located within smaller craters (<15 km in diameter), whose sharp crater rim crest morphologies suggest that they may be relatively young. Ice in fresh-looking craters suggests that ice has been delivered to the lunar surface more recently, perhaps from micrometeorites or through solar wind interactions with the lunar regolith. Finally, we also analyze a group of ancient craters that does not host surface water ice, even though these craters are present-day cold traps. These specific ancient craters would not have been thermally stable for the cold-trapping of water ice before the onset of true polar wander suggested by Siegler et al. (2016). If true polar wander did occur on the Moon, then the ages of ice-bearing craters presented here set an upper limit for the age of post-true polar wander hydrogen emplacement of 4.1 ± 0.1 Gyr.

Deutsch, Ariel N.↗

Laser Ablation Surface Treatment of Structural Aerospace Composites and Metal Alloys for Adhesive Bonding

NASA Langley Research Center (LaRC) has been involved over the past decade in the development of laser ablation as a method to surface treat aerospace structural fiber reinforced composites (CFRPs) and metal alloys. [1- 18] Laser surface treatment has been shown to be a rapid, high precision, and reproducible method for surface treatment of these materials, and is amenable to automation. The laser ablation process removes surface contamination such as silicones, creates surface roughness, and chemically activates a surface for bonding. The degree of ablation is controllable by adjusting laser parameters. In the case of CFRPs, ablation can be performed without damage to any underlying carbon fibers. In the case of metal alloys, ablation is possible without surface embrittlement, heat damage or creation of undesirable grain structures or morphologies. The optimum laser treatment conditions are substrate dependent and generally are influenced by laser wavelength and pulse duration (typically fixed for a laser system), and laser power. In the case of metal alloys such as Ti-6Al-4V, the laser ablation process eliminates the need for several steps of the conventional processes, including hydrofluoric (HF) acid and caustic treatment. These steps are often conducted in dip tanks and require costly facilities and environmentally unfriendly liquids. In addition, the laser can create nano-porosity on the Ti-6Al-4V alloy surface allowing for sol-gel penetration and thereby creating a gradient interface with improved temperature and mechanical performance. NASA LaRC has also been involved with the development of in-line characterization methods compatible with the laser treatment process to rapidly determine the presence of key contaminates such as silicones that, even at very low concentrations, are a threat to adhesive bonding. A spectroscopic technique called micro-laser induced breakdown spectroscopy (u-LIBS) has been developed to rapidly detect silicones at concentrations below those known to cause bonding problems. This technique requires no sample preparation, vacuum or inert atmosphere, has no practical size limitations, and provides nearly instantaneous feedback to the operator. This presentation will give an overview and update of these developments with specific examples highlighted.

Connell, John W.↗

Clumped X-ray emission around radio galaxies in Abell clusters

We have made a comparison of the X-ray and radio morphologies for a sample of 41 rich cluster fields using Einstein Observatory Imaging Proportional Counter (IPC) and Very Large Array (VLA) 20 cm images. Surprisingly, we find that 75% of the radio galaxies have a statistically significant X-ray peak or subclump within 5 min of the radio galaxy position. The X-ray luminosity and the generally extended nature of the X-ray subclumps suggest that these subclumps are overdense regions emitting free-free radiation, although there is also evidence for Active Galactic Nuclei (AGN) X-ray emission coming from some of the more compact, high surface brightness X-ray peaks. Some interesting correlations with radio morphology were also discovered. For clusters which contain wide-angle-tailed radio sources associated with centrally dominant galaxies, there are significant elongations or clumps in the central X-ray emission which are unusual for this type of cluster. We suggest that cluster radio galaxies are pointers to particular clusters or regions within clusters that have recently undergone mergers between cluster subsystems.

Burns, Jack O.↗

Concerning the meteoritic origin of the Puchezh-Katunki crater

Criticism of the works of Vardaniants (1961) and Goretskii (1962) regarding the origin of the Puchezh-Katunki crater, and development of a new hypothesis regarding this disturbance. Although Vardaniants defines the Puchezh-Katunki disturbance as a structure of explosive nature and assumes that the explosion originated as a consequence of accumulation of gases in the crystalline basement of the Russian platform, he lacks evidence to qualify this explosion as coming from a depth. Goretskii's tectonic-injection hypothesis attributes the formation of the disturbance to penetration of an intrusion of basic and ultrabasic rocks into the Paleozoic rocks of the platform. It is shown that, even if the intrusion were spread somewhere at depth, it could not account for the extent of the deformation in the disturbance. It is suggested that this disturbance is of meteoritic origin, since the structure and morphology of the region are similar to the sloping conical surface produced by an explosive meteor crater. The energy, mass, and size of the asteroid which could cause such a disturbance are estimated, and it is shown that the probability of the occurrence of an impact of this size is finite over geological time.

Firsov, L.↗

Grooves on asteroids - A prediction

The characteristics of the grooves on Phobos indicate that these features were formed by a large impact, an observation which implies that grooves may occur on other small bodies. Published data on fragmentation experiments suggest that the energy of the impact which produced the grooves on Phobos was in a critical range, strong enough to produce fracturing at large distances from the crater, but too weak to fragment the object. Other small bodies, such as asteroids, which have experienced an impact flux sufficient to include one such critical cratering event should show grooves, unless they have been fragmented subsequently by a more severe impact. It is estimated that between 1/12th and 1/4th of asteroids smaller than 100 km in diameter may have surface features resembling grooves associated with large impact craters. Several morphologically distinct types of grooves can be expected, depending on the thickness and composition of the regolith of the parent body.

Thomas, P.↗