Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Epitaxial low-temperature growth of In{sub 0.5}Ga{sub 0.5}As films on GaAs(100) and GaAs(111)A substrates using a metamorphic buffer

A complex investigation of epitaxial In{sub 0.5}Ga{sub 0.5}As films grown on GaAs substrates with crystallographic orientations of (100) and (111)A in the standard high- and low-temperature modes has been performed. The parameters of the GaAs substrate and In{sub 0.5}Ga{sub 0.5}As film were matched using the technology of step-graded metamorphic buffer. The electrical and structural characteristics of the grown samples have been studied by the van der Pauw method, atomic force microscopy, scanning electron microscopy, and transmission/ scanning electron microscopy. The surface morphology is found to correlate with the sample growth temperature and doping with silicon. It is revealed that doping of low-temperature In{sub 0.5}Ga{sub 0.5}As layers with silicon significantly reduces both the surface roughness and highly improves the structural quality. Pores 50–100 nm in size are found in the low-temperature samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma treatment of multiwall carbon nanotubes for dispersion improvement in water

Microwave excited Ar/H{sub 2}O surface-wave plasma was used to treat multiwall carbon nanotubes (MWCNTs) to modify their surface characteristics and thus improve their dispersion capability in water. Changes in the atom composition and structure properties of MWCNTs were analyzed using x-ray photoelectron spectroscopy and Raman spectroscopy, and the surface morphology of MWCNTs was observed by field emission scanning electron microscopy and scanning transmission electron microscopy. The results indicated that Ar/H{sub 2}O plasma treatment greatly enhanced the content of oxygen, and modified surface microstructure properties. The integrity of nanotube patterns, however, was not damaged.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth of crystalline ZnO films on the nitridated (0001) sapphire surface

The surface morphology and structure of (0001) sapphire substrates subjected to thermochemical nitridation in a mixture of N{sub 2}, CO, and H{sub 2} gases are investigated by electron and probe microscopy and X-ray and electron diffraction. It is shown that an aluminum nitride layer is formed on the substrate surface and heteroepitaxial ZnO films deposited onto such substrates by magnetron sputtering have a higher quality when compared with films grown on sapphire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray microstructural analysis of nanocrystalline TiZrN thin films by diffraction pattern modeling

A detailed microstructural characterization of nanocrystalline TiZrN thin films grown at different substrate temperatures (T{sub S}) was carried out by X-ray diffraction (XRD). Total diffraction pattern modeling based on more meaningful microstructural parameters, such as crystallite size distribution and dislocation density, was performed to describe the microstructure of the thin films more precisely. This diffraction modeling has been implemented and used mostly to characterize powders, but the technique can be very useful to study hard thin films by taking certain considerations into account. Nanocrystalline films were grown by using the cathodic pulsed vacuum arc technique on stainless steel 316L substrates, varying the temperature from room temperature to 200 °C. Further surface morphology analysis was performed to study the dependence of grain size on substrate temperature using atomic force microscopy (AFM). The crystallite and surface grain sizes obtained and the high density of dislocations observed indicate that the films underwent nanostructured growth. Variations in these microstructural parameters as a function of T{sub S} during deposition revealed a competition between adatom mobility and desorption processes, resulting in a specific microstructure. These films also showed slight anisotropy in their microstructure, and this was incorporated into the diffraction pattern modeling. The resulting model allowed for the films' microstructure during synthesis to be better understood according to the experimental results obtained. - Highlights: • Mobility and desorption competition generates a critical temperature. • A microstructure anisotropy related to the local strain was observed in thin films. • Adatom mobility and desorption influence grain size and microstrain.

36 MATERIALS SCIENCE↗

Alluvial fan morphology: A self-similar free boundary problem description

In this work, we examine approximate geometrically self-similar solutions to a parabolic free boundary value problem applied to alluvial fan surface morphology and growth. Alluvial fans are fan- or cone-shaped sedimentary deposits caused by the rapid deposition of sediment from a canyon discharging onto a flatter plain. Longitudinal, topographic profiles of fans can be readily described by a seemingly time independent dimensionless profile (DeChant et al., 1999). However, because an alluvial fan can be expected to grow over time, it is clear that this “steady” profile is certainly time dependent and can be described using a space-time self-similar solution. In an experimental and theory-based study, Guerit et al. (2014) developed a self-similar (or as they describe it a self-affine) linear solution based upon an approximate first order small parameter expansion solution for a 1-d homogeneous nonlinear diffusion equation. Direct substitution of this result into a linear diffusion equation suggests that this first order expression may not fully satisfy the associated governing equation. In contrast, we develop a more complete solution based upon a modeled approximation for the axi-symmetric formulation such that the associated temporal behavior is consistent with a 1/3 time power-law as described by Reitz and Jerolmack (2014). The resulting expression is an exact solution to a linear heat equation. Furthermore, we emphasize that a small parameter is not inherent to the resulting profile result and is not included in our model development. Though developed using rather different approaches, the formal solution developed here is in good agreement with the simple polynomial described by DeChant et al. (1999) suggesting that this self-similar solution is a suitable time dependent representation of alluvial fan longitudinal profile form and improves on earlier work.

58 GEOSCIENCES↗

Preparation and characterization of nanostructured NiO/MnO{sub 2} composite electrode for electrochemical supercapacitors

Nanostructured nickel-manganese oxides composite was prepared by the sol-gel and the chemistry deposition combination new route. The surface morphology and structure of the composite were characterized by scanning electron microscope and X-ray diffraction. The as-synthesized NiO/MnO{sub 2} samples exhibit higher surface area of 130-190 m{sup 2} g{sup -1}. Cyclic voltammetry and galvanostatic charge/discharge measurements were applied to investigate the electrochemical performance of the composite electrodes with different ratios of NiO/MnO{sub 2}. When the mass ratio of MnO{sub 2} and NiO in composite material is 80:20, the specific capacitance value of NiO/MnO{sub 2} calculated from the cyclic voltammetry curves is 453 F g{sup -1}, for pure NiO and MnO{sub 2} are 209, 330 F g{sup -1} in 6 mol L{sup -1} KOH electrolyte and at scan rate of 10 mV s{sup -1}, respectively. The specific capacitance of NiO/MnO{sub 2} electrode is much larger than that of each pristine component. Moreover, the composite electrodes showed high power density and stable electrochemical properties.

36 MATERIALS SCIENCE↗

Physical properties of RF magnetron sputtered GaN/n-Si thin film: impacts of RF power

GaN thin film was successfully produced on n-Si(100) substrate by RF magnetron sputter under different RF power. Experimental measurement techniques such as UV/Vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and Micro-Raman Spectroscopy were used to research effects of Radio Frequency power on physical properties of produced thin film. It has been found that produced thin film was polycrystalline structure with (100) and (110) planes of hexagonal GaN from X-ray diffraction measurement result. It also proved that increasing RF power gives rise to deterioration in crystal quality of GaN thin film. Reason of this deterioration was discussed. It has been achieved that increasing RF power has resulted in decreasing optical band gap energy of GaN thin film. Reasons for these changes in optical band gap energy were explained. It was seen that some thin films were grown as layer-plus-island mode (Stranski–Krastanov growth mode) and others were grown as layer-by-layer growth mode (Frank van der Merwe mode) from AFM analysis. It has been found that increasing RF power has resulted in improvement of surface morphology of thin film from field emission scanning electron microscopy analysis. However, reaching RF power to 125 W leads to start to deteriorate of surface of GaN thin film. The reasons for this have been discussed. E{sub 1}(TO) transverse optical phonon mode of hexagonal GaN with different intensity was detected from Micro-Raman Spectroscopy measurement. The reasons for this difference have been discussed. It was concluded that RF power has played a significant role in growing high quality GaN thin film. Morphological, structural, and optical properties of GaN thin film were enhanced by controlling RF power, making them a potential candidate for LED, solar cell, diode application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

PASSIVATION OF SEMICONDUCTOR SURFACES FOR IMPROVED RADIATION DETECTORS: X-RAY PHOTOEMISSION ANALYSIS

Surface passivation of device-grade radiation detector materials was investigated using x-ray photoelectron spectroscopy in combination with transport property measurements before and after various chemical treatments. Specifically Br-MeOH (2% Br), KOH with NH{sub 4}F/H{sub 2}O{sub 2} and NH{sub 4}OH solutions were used to etch, reduce and oxidize the surface of Cd{sub (1-x)}Zn{sub x}Te semiconductor crystals. Scanning electron microscopy was used to evaluate the resultant microscopic surface morphology. Angle-resolved high-resolution photoemission measurements on the valence band electronic structure and core lines were used to evaluate the surface chemistry of the chemically treated surfaces. Metal overlayers were then deposited on these chemically treated surfaces and the I-V characteristics measured. The measurements were correlated to understand the effect of interface chemistry on the electronic structure at these interfaces with the goal of optimizing the Schottky barrier height for improved radiation detector devices.

36 MATERIALS SCIENCE↗

In‐Situ Nanostructuring and Stabilization of Polycrystalline Copper by an Organic Salt Additive Promotes Electrocatalytic CO 2 Reduction to Ethylene

Abstract Bridging homogeneous molecular systems with heterogeneous catalysts is a promising approach for the development of new electrodes, combining the advantages of both approaches. In the context of CO 2 electroreduction, molecular enhancement of planar copper electrodes has enabled promising advancement towards high Faradaic efficiencies for multicarbon products. Besides, nanostructured copper electrodes have also demonstrated enhanced performance at comparatively low overpotentials. Herein, we report a novel and convenient method for nanostructuring copper electrodes using N , N ′‐ethylene‐phenanthrolinium dibromide as molecular additive. Selectivities up to 70 % for C ≥2 products are observed for more than 40 h without significant change in the surface morphology. Mechanistic studies reveal several roles for the organic additive, including: the formation of cube‐like nanostructures by corrosion of the copper surface, the stabilization of these nanostructures during electrocatalysis by formation of a protective organic layer, and the promotion of C ≥2 products.

Thevenon, Arnaud↗

Influences of alcoholic solvents on spray pyrolysis deposition of TiO{sub 2} blocking layer films for solid-state dye-sensitized solar cells

Influences of alcoholic solvents for titanium diisopropoxide bis(acetylacetonate) (TPA) precursor solutions on the spray pyrolysis deposited TiO{sub 2} films and the photovoltaic performance of the solid-state dye-sensitized solar cells (SDSCs) using these TiO{sub 2} films as the blocking layers were investigated. Smooth TiO{sub 2} films were obtained by spray pyrolysis deposition of a TPA solution in isopropanol (IPA) at a relatively low temperature of 260 Degree-Sign C. On the other hand, when ethanol was used as solvent, the TiO{sub 2} films fabricated at the same temperature showed much rougher surfaces with many pinholes. Our results showed that ethanol reacts with TPA to form titanium diethoxide bis(acetylacetonate) (TEA), which requires a higher thermal decomposition temperature than that of TPA. SDSCs with TiO{sub 2} blocking layer films fabricated using a TPA solution in IPA showed higher power conversion efficiencies with smaller variations. - Graphical abstract: Alcoholic solvents used for the TiO{sub 2} precursor play a critical role in determining the surface morphology of blocking layers and thus the photovoltaic performance of the SDSCs. Highlights: Black-Right-Pointing-Pointer Solvent influences morphology of spray pyrolysis deposited TiO{sub 2} blocking layer. Black-Right-Pointing-Pointer Ethanol reacts with TPA, resulting poor quality of blocking layer. Black-Right-Pointing-Pointer Isopropanol is better than ethanol for obtaining smooth blocking layer. Black-Right-Pointing-Pointer SDSC with blocking layer made with isopropanol showed better performance.

36 MATERIALS SCIENCE↗

Improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering

The AISI 316L stainless steel (SS) has been widely used in both artificial knee and hip joints in biomedical applications. In the present study, yttria stabilized zirconia (YSZ, ZrO{sub 2} + 8% Y{sub 2}O{sub 3}) films were deposited on AISI 316L SS by radio-frequency magnetron sputtering using different power densities (50–250 W) and deposition times (30–120 min) from a YSZ target. The crystallographic orientation and surface morphology were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effects of the surface modification on the corrosion performance of AISI 316L SS were evaluated in phosphate buffered saline (PBS) solution using an electrochemical test on both the virgin and coated samples. The YSZ coatings have a (111) preferred orientation during crystal growth along the c-axis for short deposition times (30–60 min), whereas a polycrystalline structure forms during deposition times from 90 to 120 min. The corrosion protective character of the YSZ coatings depends on the crystal size and film thickness. A significant increase in adhesion and corrosion resistance by at least a factor of 46 and a higher breakdown potential were obtained for the deposited coatings at 200 W (120 min). - Highlights: • Well-formed and protective YSZ coatings were achieved on AISI 316L SS substrates. • Films grown at high power and long deposition time have polycrystalline structures. • The crystal size varies from ∼ 5 to 30 nm as both power and deposition time increased. • The differences of corrosion resistance are attributed to internal film structure.

36 MATERIALS SCIENCE↗

Aqueous chemical growth of Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films: Air annealing and photoelectrochemical properties

Highlights: ► Facile and efficient route for synthesis of CZTS film. ► Effect of annealing on structural, morphological and electrical properties of CZTS films. ► Solar cell study. - Abstract: In present investigation, Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films have been deposited on to glass substrates by novel chemical successive ionic layer adsorption and reaction (SILAR) method. The effect of air annealing in the temperature range between 573 and 773 K on the structural, morphological, optical and electrical properties has been studied. The X-ray diffraction studies revealed the formation of polycrystalline CZTS films. The surface morphological study showed smooth, compact and uniform film formation after annealing formation. The band gap was in between range from 1.5 to 1.8 eV depending on annealing temperature. The thermo emf measurement revealed that the CZTS exhibits p-type electrical conductivity. Further, photoactivity of CZTS thin films was tested by forming the photoelectrochemical cell.

36 MATERIALS SCIENCE↗

Compositionally-driven surface nanostructuring on refractory compositionally complex alloys under low energy helium bombardment

Additive manufacturing enables user-defined control of the compositional complexity, opening new design spaces for complex concentrated alloys (CCAs). Refractory CCAs may offer enhanced performance in the divertor region of a fusion reactor environment where plasma-facing materials will be subject to high temperatures, low energy He and D particles, and 14 MeV neutrons. In this work, specimens with the nominal composition of NbTaMoTi, NbTaMo, NbTaTi, and NbTa were fabricated via directed energy deposition (DED) then bombarded with 40 eV He ions to a fluence of 2x10 26 m −2 at ∼ 1000 K. Post irradiation, the surface morphology and composition were examined with electron microscopy and x-ray photoelectron spectroscopy to offer information on the spatial distribution of surface nano-structuring. Sub-surface He bubbles driving the nano-structuring were examined with electron microscopy techniques. Analysis indicates the local composition directly influences the He bubble and tendril size, while the region with the highest complexity showed the shortest nano-structuring. Molecular Dynamics simulations complement the experimental results, showing comparable helium bubble growth and migration as a function of compositional complexity. This work demonstrates the compositional dependence of surface nanostructure formation of compositionally complex alloys, important for future design of complex plasma facing materials in fusion reactors.

Complex concentrated alloys↗

Elucidating ultrafast electron dynamics at surfaces using extreme ultraviolet (XUV) reflection–absorption spectroscopy

Here we review the recent development of extreme ultraviolet reflection–absorption (XUV-RA) spectroscopy. This method combines the benefits of X-ray absorption spectroscopy, such as element, oxidation, and spin state specificity, with surface sensitivity and ultrafast time resolution, having a probe depth of only a few nm and an instrument response less than 100 fs. Using this technique we investigated the ultrafast electron dynamics at a hematite (α-Fe 2 O 3 ) surface. Surface electron trapping and small polaron formation both occur in 660 fs following photoexcitation. These kinetics are independent of surface morphology indicating that electron trapping is not mediated by defects. Instead, small polaron formation is proposed as the likely driving force for surface electron trapping. We also show that in Fe 2 O 3 , Co 3 O 4 , and NiO, band gap excitation promotes electron transfer from O 2p valence band states to metal 3d conduction band states. In addition to detecting the photoexcited electron at the metal M 2,3 -edge, the valence band hole is directly observed as transient signal at the O L 1 -edge. The size of the resulting charge transfer exciton is on the order of a single metal–oxygen bond length. Spectral shifts at the O L 1 -edge correlate with metal–oxygen bond covalency, confirming the relationship between valence band hybridization and the overpotential for water oxidation. Furthermore, these examples demonstrate the unique ability to measure ultrafast electron dynamics with element and chemical state resolution using XUV-RA spectroscopy. Accordingly, this method is poised to play an important role to reveal chemical details of previously unseen surface electron dynamics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diazirine-based photo-crosslinkers for defect free fabrication of solution processed organic light-emitting diodes

The fabrication of solution deposited OLEDs is fraught with difficulties, largely due to the interlayer mixing and surface erosion during sequential deposition of the layers. We demonstrate that these problems can be circumvented by using photopolymerizable diazirine-based cross-linker capable of converting soluble organic materials into highly cross-linked insoluble networks. 3-Trifluoromethyl(aryl)diazirines photolyze readily upon the 10–15 min exposure of 365 nm UV irradiation to generate carbenes, which react with polymers or small molecules via C–H bond insertion producing highly cross-linked materials. This photo-generated cross-linking does not require any catalyst, initiator or short-wavelength UV light and is performed at room temperature, releasing molecular nitrogen as the only byproduct. To show the cross-linked polymer layers do not display inter-layer mixing, we deposited red-emitting regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) over cross-linked (10% cross-linker) blue emitting dioctyl polyfluorene (PFO) layer. The overlaid layers showed clear and well-defined boundary with no interlayer mixing. The surface morphology of the solution deposited layers was investigated by AFM to show that the cross-linked layers exhibited significant decrease in surface roughness. This is also shown on the example of the hole transporting material 4,4'-bis[N-(1-naphthyl)-N-phenylamino]-biphenyl (NPB) which displayed roughness average to decrease from 6.4 nm to 1.0 nm. The effect of decreased surface roughness on the performance of phosphorescent OLEDs was investigated by fabricating devices with configuration of ITO/PEDOT:PSS/NPB:(0%/5%/10%) cross-linker/MCP:6% Ir(mppy) 3 /TPBI/CsF/Al. Furthermore, following the diazirine-mediated cross-linking, the OLEDs displayed a decrease in turn-on voltage from 3.8 V to 3.0 V along with a six-fold enhancement of external quantum efficiency (EQE max ) from 1.1% to 6.8% and maximum luminous efficiency increase from 3.8 cd A -1 to 22.9 cd A -1 . These results demonstrate that the simple diazirine mediated photo-cross-linking using mild conditions compatible with organic layers is a promising strategy for improving the performance of the solution-processed OLEDs.

36 MATERIALS SCIENCE↗

Heterojunction thin films based on multifunctional metal oxides for photovoltaic application

Metal oxides based multifunctional heterojunction thin films of ZnO/SnO{sub 2} and ZnO/SnO{sub 2}/CuO QDs were prepared by spin-coating technique. The crystallographic properties and the surface morphologies of the films were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The optical absorption studies revealed that the film thickness has considerable effect on the band gap values and is found to be in the range of 3.73–3.48 eV. The photoluminescence spectra showed several weak visible emission peaks related to the deep level defects (450-575 nm). Finally, the current density-voltage (J-V) characteristic of ZnO/SnO{sub 2}/CuO QDs (ZSCI) based heterojunction thin film coated on ITO is also reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hexagonally ordered nanodots: Result of substrate rotation during oblique incidence low energy IBS

The anisotropic regular patterns are often results during oblique incidence ion beam sputtering (IBS). Simultaneous substrate rotation (SR) during IBS can suppress surface roughening and removes anisotropic nature of surface pattern. Here, the evolution of Si surface morphology as result of with and without SR is studied during oblique incidence low energy Ar{sup +} sputtering. Resultant topography shows smooth surface to hexagonally ordered nanodots at different rotating conditions. Interestingly, surface roughness exhibits non-monotonic dependence on rotation frequency. The underlying mechanism for dot formation can be described within the framework of isotropic DKS equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗