Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Nitridation of atomically smooth (111) diamond surfaces using a low temperature Penning plasma discharge

Diamond is a material with a wide band gap that can host a variety of isolated paramagnetic defects, called “color centers”1. These color centers have attractive optical and magnetic properties suitable for quantum applications including quantum computing, nanophotonics and quantum sensing. The most common one is the negatively charged nitrogen vacancy (NV) color center. For quantum sensing, it is desirable to reduce the distance between the NV center and the analyte by using shallow color centers in order to increase sensitivity. In this context, the diamond surface termination is especially critical. The appropriate surface termination is required to stabilize the color centers and mitigate surface magnetic noise. The nitrogen termination of diamond has been postulated as highly desirable for the NV color center. The goal of this project is to take advantage of an electron beam-generated ExB low temperature plasma developed by the Princeton Collaborative Low Temperature Plasma Research Facility (PCRF) at the Princeton Plasma Physics Laboratory (PPPL) to nitridate the surface of (100) diamond single crystals with minimal surface damage. In this reactor, the use of a magnetized plasma enables gentle processing of materials sensitive to ion damage. This is in strong contrast to radiofrequency plasma processing reactors which are known to etch and sputter the surface. XPS measurements indicate the incorporation of nitrogen and oxygen atoms at the surface in similar amounts. XAS measurements confirm the nitridation and indicate that the nitrogen termination is different from the nitrogen termination obtained using radiofrequency plasma treatment4. The combination of these results indicates the formation of amid species at the (100) diamond surface that are promising for the stabilization of NV centers for quantum sensing.

36 MATERIALS SCIENCE↗

Preferential incorporation of substitutional nitrogen near the atomic step edges in diluted nitride alloys

We have investigated the influence of the surface roughness on nitrogen incorporation during the molecular beam epitaxy of diluted nitrides, independently of the other growth parameters. GaPN/GaP layers grown simultaneously on surfaces displaying different roughnesses reveal a large difference in nitrogen incorporation despite the same growth temperature and growth rate. The same difference is found on quasi-lattice-matched GaAsPN demonstrating that the phenomenon is not related to any strain-induced mechanisms. The tendency is clearly confirmed when varying the growth conditions. As a direct consequence, the incorporation of substitutional nitrogen near the atomic step edges is found to be 6.7 times more probable than the in-plane nitrogen incorporation. The formation of N-N{sub i} clusters and their stability on the surface is discussed.

36 MATERIALS SCIENCE↗

Subtle and reversible interactions of ambient pressure H 2 with Pt/Cu(111) single-atom alloy surfaces

Pt-Cu single-atom alloys (SAA) have been identified as promising hydrogenation catalysts with an ability to activate H 2 better than the individual metals alone. We studied the interaction between H 2 and Pt/Cu(111) SAA model surface using ambient pressure X-ray photoelectron spectroscopy (AP-XPS). A binding energy shift in the Pt 4f spectrum indicates the presence of adsorbed H at 350 K, occurring because of HeH bond activation. No evidence was found of either surface segregation, subsurface diffusion of Pt atoms, or any effects on the thermal stability of the surface, likely due to the subtle interaction between Pt and H. This shift is reversible upon evacuation of H 2 , which is a sign of a weak interaction. In addition, we studied the effect of H 2 and CO coadsorption and found that while the surface is unaffected by poisoning by a small amount of CO at 350 K, CO can displace adsorbed H on almost half of the surface Pt sites at 300 K. The susceptibility to CO poisoning increases after the surface was heated to 450 K due to changes in the structure of the subsurface layer that enhance the binding of CO to the surface Pt sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalyzed Nano-Framework Stablized High Density Reversible Hydrogen Storage Systems

A wide range of high capacity on-board rechargeable material candidates have exhibited non-ideal behavior related to irreversible hydrogen discharge / recharge behavior, and kinetic instability or retardation. This project addresses these issues by incorporating solvated and other forms of complex metal hydrides, with an emphasis on borohydrides, into nano-scale frameworks of low density, high surface area skeleton materials to stabilize, catalyze, and control desorption product formation associated with such complex metal hydrides. A variety of framework chemistries and hydride / framework combinations were investigated to make a relatively broad assessment of the method's potential. In this project, the hydride / framework interactions were tuned to decrease desorption temperatures for highly stable compounds or increase desorption temperatures for unstable high capacity compounds, and to influence desorption product formation for improved reversibility. First principle modeling was used to explore heterogeneous catalysis of hydride reversibility by modeling H 2 dissociation, hydrogen migration, and rehydrogenation. Atomic modeling also demonstrated enhanced NaTi(BH 4 ) 4 stabilization at nano-framework surfaces modified with multi-functional agents. Amine multi-functional agents were found to have more balanced interactions with nano-framework and hydride clusters than other functional groups investigated. Experimentation demonstrated that incorporation of Ca(BH 4 ) 2 and Mg(BH 4 ) 2 in aerogels enhanced hydride desorption kinetics. Carbon aerogels were identified as the most suitable nano-frameworks for hydride kinetic enhancement and high hydride loading. High loading of NaTi(BH 4 ) 4 ligand complex in SiO 2 aerogel was achieved and hydride stability was improved with the aerogel. Although improvements of desorption kinetics was observed, the incorporation of Ca(BH 4 ) 2 and Mg(BH 4 ) 2 in nano-frameworks did not improve their H 2 absorption due to the formation of stable alkaline earth B 12 H 12 intermediates upon rehydrogenation. This project primarily investigated the effect of nano-framework surface chemistry on hydride properties, while the effect of pore size is the focus area of other efforts (e.g., HRL, Sandia National Laboratories (SNL) etc.) within the Metal Hydride Center of Excellence (MHCoE). The projects were complementary in gaining an overall understanding of the influence of nano-frameworks on hydride behavior.

08 HYDROGEN↗

Summary Report on Ion Irradiation Study of Ceramic Coating on Suppressing FCCI

Advanced cladding is critical for advanced nuclear reactors with an enhanced performance in radiation tolerance and neutron transparency. Using advanced cladding will ensure the adequate thermal conductivity and mechanical stability of the cladding base material, corrosion resistance, high-temperature coolant compatibility of the cladding surface, and chemical stability in the cladding inner wall against fuel cladding chemical interaction (FCCI). An innovative cladding with a three-layer structure (i.e., a modified surface, a clad base material, and a modified inner wall) promises to meet all these requirements. Initial research and development (R&D) regarding this innovative cladding seek to demonstrate the effectiveness of a thin ceramic coating in suppressing FCCI under ion irradiation to high dose. This United States (U.S.) Department of Energy (DOE)–Office of Nuclear Energy (NE) project report summarizes the results of recent ion irradiation studies of diffusion-couple samples with details of an ion irradiation experiment, the characterization of the interface microstructure of cerium (Ce)/titanium nitride (TiN)/oxide-dispersion strengthened (ODS), Ce/TiN/iron (Fe), Ce/ODS, and Ce/Fe samples irradiated with 80 million electron-volts (MeV) of xenon (Xe) ions to 100 displacements per atom (dpa) at 500?C using the Argonne Tandem Linac Accelerator System (ATLAS) facility at Argonne National Laboratory (ANL). The results of the ODS-substrate sample are encouraging and demonstrate the effectiveness of a thin ceramic coating on FCCI mitigation under irradiation. The results from an Fe-substrate sample revealed a complex microstructure, and the root cause is discussed.

36 MATERIALS SCIENCE↗

Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces

Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi 0.95 Ni 0.05 O 3–δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi 0.9 Nb 0.05 Ni 0.05 O 3–δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.

25 ENERGY STORAGE↗

Stabilization of MgAl 2 O 4 spinel surfaces via doping

Here, the surface structure of complex oxides plays a vital role in processes such as sintering, thin film growth, and catalysis, as well as being a critical factor determining the stability of nanoparticles. We report atomistic calculations of the low-index stoichiometric magnesium aluminate spinel (MgAl 2 O 4 ) surfaces, each with two different chemical terminations. High temperature annealing was used to explore the potential energy landscape and provide more stable surface structures. We find that the lowest energy surface is {100} while the highest energy surface is {111}. The surfaces were subsequently doped with three trivalent dopants (Y 3+ , Gd 3+ , La 3+ ) and one tetravalent dopant (Zr 4+ ) and both the surface segregation energies of the dopants and surface energies of the doped surface were determined. All of the dopants reduce the surface energy of spinel, though this reduction in energy depends on both the size and valence of the dopant. Dopants with larger ionic radius tend to segregate to the surface more strongly and reduce the surface energy to a greater extent. Furthermore, the ionic valence of the dopants seems to have a stronger influence on the segregation than does ionic size. For both undoped and doped spinel, the predicted crystal shape is dominated by {100} surfaces, but the relative fraction of the various surfaces changes with doping due to the unequal changes in energy, which has implications on equilibrium nanoparticle shapes and therefore on applications sensitive to surface properties.

36 MATERIALS SCIENCE↗

The effects of surface tension on flooding in counter-current two-phase flow in an inclined tube

The purpose of the present study is to investigate the effects of surface tension on flooding phenomena in counter-current two-phase flow in an inclined tube. Previous studies by other researchers have shown that surface tension has a stabilizing effect on the falling liquid film under certain conditions and a destabilizing or unclear trend under other conditions. Experimental results are reported herein for air-water systems in which a surfactant has been added to vary the liquid surface tension without altering other liquid properties. The flooding section is a tube of 16 mm in inner diameter and 1.1 m length, inclined at 30-60 from horizontal. The flooding mechanisms were observed by using two high-speed video cameras and by measuring the time variation of liquid hold-up along the test tube. The results show that effects of surface tension are significant. The gas velocity needed to induce flooding is lower for a lower surface tension. There was no upward motion of the air-water interfacial waves upon flooding occurrence, even for lower a surface tension. Observations on the liquid film behavior after flooding occurred suggest that the entrainment of liquid droplets plays an important role in the upward transport of liquid. Finally, an empirical correlation for flooding velocities is proposed that includes functional dependencies on surface tension and tube inclination. (author)

42 ENGINEERING↗

Tribological Durability of Silane Monolayers on Silicon

We report the frictional performance and long-term tribological stability of various alkyl silane monolayer films on silicon by using pin-on-disk tribometry at ambient conditions. We show that the durability of monolayers derived from n-alkyltrichlorosilanes on silicon increases exponentially with the chain length of the silane precursor, which we relate to the cohesive energy of these monolayers through molecular dynamics simulations. X-ray photoelectron spectroscopy (XPS) was used to show that tribological damage consisted of the loss of molecular components that could be partially replaced upon exposure to a solution containing perfluorinated silane precursors. For monolayers derived from n-octadecyltrichlorosilane, a critical load was identified to be approximately 250 mN (200 MPa), above which failure of films occurred within 100 cycles of testing. Monolayers with hydroxyl surfaces exhibited reduced stabilities due to stronger tip-surface interactions. Monolayers with the capability for cross-linking exhibited much greater stabilities than monolayers where cross-linking was limited or prevented. Collectively, these results demonstrate that the mechanical durability of monolayers when subjected to a tribological load is greatly enhanced by maximizing dispersional interactions and cross-linking and minimizing tip-surface interactions.

Chemistry↗

Status Report on the Development of Cladding Inner-wall and Outer-wall Coatings

Advanced cladding is critical for nuclear reactors with enhanced performance in radiation tolerance, neutron transparency and reactor safety. Using advanced cladding will ensure the adequate thermal conductivity and mechanical stability of the cladding base material, corrosion resistance and high-temperature coolant compatibility of the cladding surface, and chemical stability in the cladding inner wall against fuel cladding chemical interaction (FCCI). An innovative cladding with a three-layer structure (i.e., a modified outer surface, a robust clad base material, and a modified inner wall) promises to meet all these requirements. In this status report, the initial efforts on the development of cladding inner-wall and outer-wall coatings are summarized. The activities covered in this report are (1) High-resolution TEM studies of TiN/HT-9 interface atomic structure and chemistry after ion irradiation, (2) High-resolution TEM studies of TiN/14YWT ODS interface atomic structure after thermal cycling, (3) Inner-wall TiN coating for an experimental 14YWT ODS cladding, and (4) Corrosion test of TiN coated Ziracloy-4 bar samples.

36 - MATERIALS SCIENCE↗

Advanced Remedial Methods for Metals and Radionuclides in Vadose Zone Environments

Functionally, the methods for addressing contamination must remove and/or reduce transport or toxicity of contaminants. This problem is particularly challenging in arid environments where the vadose zone can be up to hundreds of feet thick, rendering transitional excavation methods exceedingly costly and ineffective. Delivery of remedial amendments is one of the most challenging and critical aspects for all remedy-based approaches. The conventional approach for delivery is through injection of aqueous remedial solutions. However, heterogeneous vadose zone environments present hydrologic and geochemical challenges that limit the effectiveness. Because the flow of solution infiltration is dominantly controlled by gravity and suction, injected liquid preferentially percolates through highly permeable pathways, by-passing low-permeability zones which frequently contain the majority of the contamination. Moreover, the wetting front can readily mobilize and enhance contaminant transport to underlying aquifers prior to stabilization. Development of innovative, in-situ technologies may be the only way to meet remedial action objectives and long-term stewardship goals. Shear-thinning fluids (i.e., surfactants) can be used to lower the liquid surface tension and create stabile foams, which readily penetrate low permeability zones. Although surfactant foams have been utilized for subsurface mobilization efforts in the oil and gas industry, so far, the concept of using foams as a delivery mechanism for transporting reactive remedial amendments into deep vadose zone environments to stabilize metal and long-lived radionuclide contaminants has not been explored. Foam flow can be directed by pressure gradients, rather than being dominated by gravity; and, foam delivery mechanisms limit the volume of water (< 20% vol.) required for remedy delivery and emplacement, thus mitigating contaminant mobilization. We will present the results of a numerical modeling and integrated laboratory-/ intermediate-scale investigation to simulate, develop, demonstrate, and monitor (i.e. advanced geophysical techniques and advanced predictive biomarkers) foam-based delivery of remedial amendments to remediate metals and radionuclides in vadose zone environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Strong π-π interaction of porphyrins on (6,5) carbon nanotubes with full surface coverage: Ab-initio calculations

The stability, electronic, and optical properties of (6,5) single-walled carbon nanotubes (CNTs) functionalized with free-base tetraphenylporphyrin (TPP) molecules through π-stacking interactions are studied by ab-initio calculations. The stability and optical response of the CNT-TPP compounds for increasing CNT-surface coverage are investigated. Our results show that four TPP molecules forming a ring around the CNT is the most stable configuration, showing strong binding energies of about 2.5 eV/TPP. However, this binding energy can increase even more after additional molecules assemble side by side along the CNT, favoring the formation of a full single layer of TPP, as experimentally suggested. The strong π-π attractive forces induce molecular distortions that move the TPP higher-occupied molecular orbital levels inside the CNT bandgap, changing the optical response of the TPP molecules stacked on the CNT.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three-Electrode Study of Electrochemical Ionomer Degradation Relevant to Anion-Exchange-Membrane Water Electrolyzers

Among existing water electrolysis (WE) technologies, anion-exchange-membrane water electrolyzers (AEMWEs) show promise for low-cost operation enabled by the basic solid-polymer electrolyte used to conduct hydroxide ions. The basic environment within the electrolyzer, in principle, allows the use of non-platinum-group metal catalysts and less-expensive cell components compared to acidic-membrane systems. Nevertheless, AEMWEs are still underdeveloped, and the degradation and failure modes are not well understood. To improve performance and durability, supporting electrolytes such as KOH and K 2 CO 3 are often added to the water feed. The effect of the anion interactions with the ionomer membrane (particularly other than OH – ), however, remains poorly understood. We studied three commercial anion-exchange ionomers (Aemion, Sustainion, and PiperION) during oxygen evolution (OER) at oxidizing potentials in several supporting electrolytes and characterized their chemical stability with surface-sensitive techniques. We analyzed factors including the ionomer conductivity, redox potential, and pH tolerance to determine what governs ionomer stability during OER. Specifically, we discovered that the oxidation of Aemion at the electrode surface is favored in the presence of CO 3 2– /HCO 3 – anions perhaps due to the poor conductivity of that ionomer in the carbonate/bicarbonate form. Sustainion tends to lose its charge-carrying groups as a result of electrochemical degradation favored in basic electrolytes. PiperION seems to be similarly negatively affected by a pH drop and low carbonate/bicarbonate conductivity under the applied oxidizing potential. Furthermore, the insight into the interactions of the supporting electrolyte anions with the ionomer/membrane helps shed light on some of the degradation pathways possible inside of the AEMWE and enables the informed design of materials for water electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Responsive blends of block copolymers stabilize the hexagonally perforated lamellae morphology

Blends of block copolymers can form phases and exhibit features distinct from the constituent materials. Herein we study thin film blends of cylinder-forming and lamellar-forming block copolymers across a range of substrate surface energies. Blend materials are responsive to interfacial energy, allowing selection of pure or coexisting phases based on surface chemistry. Blending stabilizes certain motifs that are typically metastable, and can be used to generate pure hexagonally perforated lamellar thin films across a range of film thicknesses and surface energies. This tolerant behavior is ascribed to the ability of blend materials to redistribute chains to stabilize otherwise high-energy defect structures. The blend responsiveness allows the morphology to be spatially defined through multi-tone chemical surface patterns.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving the Thermodynamic Stability of Aluminate Spinel Nanoparticles with Rare Earths

Surface energy is a key parameter to understand and predict the stability of catalysts. In this work, the surface energy of MgAl 2 O 4 , an important base material for catalyst support, was reduced by using dopants prone to form surface excess (surface segregation): Y 3+ , Gd 3+ , and La 3+ . The energy reduction was predicted by atomistic simulations of spinel surfaces and experimentally demonstrated by using microcalorimetry. The surface energy of undoped MgAl 2 O 4 was directly measured as 1.65 ± 0.04 J/m 2 and was reduced by adding 2 mol % of the dopants to 1.55 ± 0.04 J/m 2 for Y-doping, 1.45 ± 0.05 J/m 2 for Gd-doping, and 1.26 ± 0.06 J/m 2 for La-doping. Atomistic simulations are qualitatively consistent with the experiments, reinforcing the link between the role of dopants in stabilizing the surface and the energy of segregation. Surface segregation was experimentally assessed using electron energy loss spectroscopy mapping in a scanning transmission electron microscopy image. Finally, the reduced energy resulted in coarsening inhibition for the doped samples and, hence, systematically smaller particle sizes (larger surface areas), meaning increased stability for catalytic applications. Moreover, both experiment and modeling reveal preferential dopant segregation to specific surfaces, which leads to the preponderance of {111} surface planes and suggests a strategy to enhance the area of desired surfaces in nanoparticles for better catalyst support activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of the Bastnäsite (001) Surface by Crystal Truncation Rod X-ray Diffraction and Ab Initio Molecular Dynamics: Implications for Separations of a Rare Earth Ore Mineral

Bastnäsite ((Ce,La)FCO 3 ) is the primary mineral source of light rare earth elements, but its surface structure is not well understood. This presents a major challenge in improving beneficiation strategies. In this work, a synergistic combination of X-ray scattering and ab initio molecular dynamics (AIMD) was used to gain atomistic insight into the interfacial structure of bastnäsite. Surface X-ray scattering was used to measure crystal truncation rods (CTRs) of the bastnäsite (001) surface, a significant crystal face with a previously unknown termination. The best-fit atomic-scale model of the CTR data features a carbonate layer at the surface, which is stabilized by the relaxation of carbonate groups from their bulk structural positions. AIMD simulations predict similar surface relaxations, which are shown to be influenced by the protonation of oxygen atoms at the surface. Evidence of ordered water at the interface is also observed in the best-fit model and AIMD simulations. Further, the presence of a carbonate layer at this dominant crystal surface is significant for improving separation technologies because most commonly used ligands utilize anionic functional groups to chelate metal cations at particle surfaces. Without modification, anionic ligands are expected to have poor affinity for the carbonate-terminated (001) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving LiNiO 2 cathode performance through particle design and optimization

We report to enable further development of Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.9) cathodes for commercial applications, fundamental understanding of the synthesis–property–performance relationships in the LiNiO 2 (LNO) parent phase is essential. In the present study, we report synthesis approaches to produce well-formed, similar-sized single-crystal LiNiO 2 (SC-LNO) with different shapes and dominating surface facets, and reveal the dependence of cathode rate performance and cycling stability on particle morphology and surface. While octahedron-shaped SC-LNO with the (012) surface shows better rate capability and improved ability in utilizing the kinetically slow anodic process in the 3.5 V region, cubic-shaped SC-LNO with the (104) surface delivers superior cycling stability, especially upon cycling at a high upper cutoff voltage of 4.6 V. Improvement in cycling stability is correlated with reduced surface reconstruction and preferential LiF formation through the interaction with the electrolyte on the (104) surface. Our study not only demonstrates the importance of particle morphology and surface design, it also provides key insights into desirable material properties for developing future LNO-based cathode materials with better performance.

25 ENERGY STORAGE↗

Al{sub 2}O{sub 3} as a suitable substrate and a dielectric layer for n-layer MoS{sub 2}

Sapphire (α-Al{sub 2}O{sub 3}) is a common substrate for the growth of single- to few-layer MoS{sub 2} films, and amorphous aluminium oxide serves as a high-κ dielectric gate oxide for MoS{sub 2} based transistors. Using density-functional theory calculations with a van der Waals functional, we investigate the structural, energetic, and electronic properties of n-layer MoS{sub 2} (n = 1and 3) on the α-Al{sub 2}O{sub 3} (0001) surface. Our results show that the sapphire stabilizes single-layer and tri-layer MoS{sub 2}, while having a negligible effect on the structure, band gap, and electron effective masses of MoS{sub 2}. This combination of a strong energetic stabilization and weak perturbation of the electronic properties shows that α-Al{sub 2}O{sub 3} can serve as an ideal substrate for depositing ultra-thin MoS{sub 2} layers and can also serve as a passivation or gate-oxide layer for MoS{sub 2} based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗