Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Oxalic Acid Adsorption on Rutile: Experiments and Surface Complexation Modeling to 150 °C

Here, we characterize oxalate adsorption by rutile in NaCl media (0.03 and 0.30 m) and between pH 3 and 10 over a wide temperature range which includes the near hydrothermal regime (10–150 °C). Oxalate adsorption increases with decreasing pH (as is typical for anion binding by metal oxides), but systematic trends with respect to ionic strength or temperature are absent. Surface complexation modeling (SCM) following the CD-MUSIC formalism, and as constrained by molecular modeling simulations and IR spectroscopic results from the literature, is used to interpret the adsorption data. The molecular modeling simulations, which include molecular dynamics simulations supported by free-energy and ab initio calculations, reveal that oxalate binding is outer-sphere, albeit via strong hydrogen bonds. Conversely, previous IR spectroscopic results conclude that various types of inner-sphere complexes often predominate. SCMs constrained by both the molecular modeling results and the IR spectroscopic data were developed, and both fit the adsorption data equally well. We conjecture that the discrepancy between the molecular simulation and IR spectroscopic results is due to the nature of the rutile surfaces investigated, that is, the perfect (110) crystal faces for the molecular simulations and various rutile powders for the IR spectroscopy studies. Although the (110) surface plane is most often dominant for rutile powders, a variety of steps, kinks, and other types of surface defects are also invariably present. Hence, we speculate that surface defect sites may be primarily responsible for inner-sphere oxalate adsorption, although further study is necessary to prove or disprove this hypothesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activation and Assembly of Plasmonic-Magnetic Nanosurfactants for Encapsulation and Triggered Release

Multifunctional surfactants hold great potentials in catalysis, separation, and biomedicine. Highly active plasmonic-magnetic nanosurfactants are developed through a novel acid activation treatment of Au–Fe 3 O 4 dumbbell nanocrystals. The activation step significantly boosts nanosurfactant surface energy and enables the strong adsorption at interfaces, which reduces the interfacial energy one order of magnitude. Mediated through the adsorption at the emulsion interfaces, the nanosurfactants are further constructed into free-standing hierarchical structures, including capsules, inverse capsules, and two-dimensional sheets. The nanosurfactant orientation and assembly structures follow the same packing parameter principles of surfactant molecules. Furthermore, nanosurfactants demonstrate the capability to disperse and encapsulate homogeneous nanoparticles and small molecules without adding any molecular surfactants. The assembled structures are responsive to external magnetic field, and triggered release is achieved using an infrared laser by taking advantage of the enhanced surface plasmon resonance of nanosurfactant assemblies. Finally, solvent and pH changes are also utilized to achieve the cargo release.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-Step Synthesis and Operando Electrochemical Impedance Spectroscopic Characterization of Heterostructured MoP–Mo 2 N Electrocatalysts for Stable Hydrogen Evolution Reaction

Here this study presents a novel synthesis of self-standing MoP and Mo 2 N heterostructured electrocatalysts with enhanced stability and catalytic performance. Facilitated by the controlled phase and interfacial microstructure, the seamless structures of these catalysts minimize internal resistivity and prevent local corrosion, contributing to increased stability. The chemical synthesis proceeds with etching step to activate the surface, followed by phosphor-nitriding in a chemical vapor deposition chamber to produce MoP-Mo 2 N@Mo heterostructured electrocatalysts. X-ray diffraction analyses confirm the presence of MoP, Mo 2 N, and Mo phases in the electrocatalyst. Morphology studies using scanning electron microscopy characterizes the hierarchical growth of structures, indicating successful formation of the heterostructure. X-ray photoelectron spectroscopy (XPS) analyses of the as-synthesized and post-catalytic activity samples reveal the chemical shift in terms of binding energy (BE) of Mo 3d XPS peak, especially after catalytic activity. The XPS BE shifts attributed to changes in oxidation state, electron transfer, and surface reconstruction during catalysis. Electrochemical evaluation of the catalysts demonstrates the superior performance of the MoP-Mo 2 N@Mo heterostructured catalyst in hydrogen evolution reactions (HER), with lower overpotentials and enhanced Tafel slopes. Stability tests reveal changes in double layer capacitance over time, suggesting surface reconstruction and increased active surface area during catalysis. Operando electrochemical impedance spectroscopy (EIS) further elucidates the dynamic changes in resistance and charge transfer during HER. Overall, comprehensive understanding of the synthesis, characterization, and electrochemical behavior of the developed MoP-Mo 2 N@Mo heterostructured electrocatalyst as presented in this paper highlights their potential utilization in sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous Activation of CH4 and CO2 for Concerted C-C Coupling at the Oxide-Oxide Interfaces

Catalytic conversion of CO2 and CH4 to value-added platform chemicals via the direct C-C coupling provides one of the most effective routes that not only address global climate change but also alleviate the dependency on traditional fossil fuels. Herein, three oxide-on-oxide catalysts that can realize direct C-C coupling on the basis of simultaneous activation of CH4 and CO2 were investigated using density functional theory (DFT) calculations. With the formation of oxide-on-oxide interfacial sites between the substrate (In2O3) and dispersed oxides ((ZnO)3, (ZrO2)3, or Ga2O3), it is found that CO2 can be activated at the defective site of In2O3 while the C-H bond of CH4 can be simultaneously activated at the M-O pair of the supported metal oxide. In contrast to the Eley-Rideal mechanism that C-C coupling of CO2 and CH3 stabilized on Zn-doped ceria follows, the formation of a Zn-C-C-O transition state at the active centers originates from a Langmuir-Hinshelwood mechanism where the activated CO2 also enhances the dissociative adsorption of CH4. There is a linear relationship between the C-C coupling reaction energy/activation barrier and CH4 dissociation energy. The results indicate that dissociative adsorption of CH4 plays a dominant role in the direct C-C coupling, whereas the adsorption/activation of CO2 is less significant. DFT calculation results of CH4 and CO2 to acetic acid on the (ZnO)3/In2O3 catalyst surface indicates that the C-C coupling step is the kinetically most relevant step. Compared with Ga2O3/In2O3 and (ZrO2)3/In2O3 catalyst surfaces, (ZnO)3/In2O3(110) is more active for the acetic acid formation. The present work provides new mechanistic insights into the direct C-C coupling of CH4 and CO2, which would be useful to design more efficient catalyst.

CH4 activation, C-C coupling, supported oxides, In↗

Pathways for the Photoreduction of Fumarate on ZnS

Semiconductor mineral particles can act as photocatalysts for organic redox reactions that occur enzymatically in modern biological metabolic pathways. Semiconductor mineral-mediated photocatalysis may have contributed to the prebiotic synthesis of organic acids on the early Earth, but assessing the plausibility of this hypothesis is impeded by the lack of knowledge about the mechanisms for light-driven organic redox reactions on mineral surfaces. We selected one step in the reverse tricarboxylic acid (rTCA) cycle, the reduction of fumarate to succinate, that has been shown to be photocatalyzed by zinc sulfide (ZnS). Using static and time-resolved optical emission and absorption spectroscopy, we studied the adsorption of fumarate and the rates and pathways for charge transfer. We find that ZnS transfers photoexcited electrons to bound and dissolved fumarate on a wide range of time scales but not to succinate, supporting the concept that ZnS mediated photoreduction of fumarate could have operated in oceans of the early Earth. Optical transient absorption (TA) spectroscopy identified a signature tentatively attributed to the fumarate radical anion that is stable for at least 8 ns, providing evidence that fumarate photoreduction under solar illumination levels occurs by successive photoelectron transfer. Finally, the model for electronic excitation, relaxation, and interfacial charge-transfer processes in ZnS provided here will inform all future studies of the photochemical reactions of this mineral.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and Chemical Properties of a Surface-Terminated Screw Dislocation in MgO

Dislocations represent an important and ubiquitous class of topological defect found at the surfaces of metal oxide materials. They are thought to influence processes as diverse as crystal growth, corrosion, charge trapping, luminescence, molecular adsorption and catalytic activity, however, their electronic and chemical properties remain poorly understood. Here, through a detailed first principles investigation into the properties of a surface terminated screw dislocation in MgO we provide atomistic insight into these issues. We show that surface dislocations can exhibit intriguing electron trapping properties which are important for understanding the chemical and electronic characteristics of oxide surfaces. The results presented in this article taken together with recent experimental reports show that surface dislocations can be equally as important as more commonly considered surface defects, such as steps, kinks and vacanies, but are now just beginning to be understood.

Environmental Molecular Sciences Laboratory↗

Direct dioxygen evolution in collisions of carbon dioxide with surfaces

The intramolecular conversion of CO 2 to molecular oxygen is an exotic reaction, rarely observed even with extreme optical or electronic excitation means. Here we show that this reaction occurs readily when CO 2 ions scatter from solid surfaces in a two-step sequential collision process at hyperthermal incidence energies. The produced O 2 is preferentially ionized by charge transfer from the surface over the predominant atomic oxygen product, leading to direct detection of both O 2 + and O 2 - . First-principles simulations of the collisional dynamics reveal that O 2 production proceeds via strongly-bent CO 2 configurations, without visiting other intermediates. Bent CO 2 provides dynamic access to the symmetric dissociation of CO2 to C+O2 with a calculated yield of 1 to 2% depending on molecular orientation. This unexpected collision-induced transformation of individual CO 2 molecules provides an accessible pathway for generating O 2 in astrophysical environments and may inspire plasmadriven electro- and photo-catalytic strategies for terrestrial CO 2 reduction.

59 BASIC BIOLOGICAL SCIENCES↗

Reduced recombination via tunable surface fields in perovskite thin films

Here, the ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering is an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-two-dimensional (2D) heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) >25%, yet a fundamental understanding to how these treatments function is still generally lacking. Here we use a unique combination of depth-sensitive nanoscale characterization techniques to uncover a tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the >25% PCE milestone. Namely, treatment with hexylammonium bromide leads to the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient that extends from defective surfaces and grain boundaries into the bulk three-dimensional (3D) layer. This interface can be optimized to extend the charge carrier lifetime to record values >30 μs and to reduce interfacial recombination velocities to values as low as <7 cm s −1 .

Devices for energy harvesting↗

Electrical Detection of Charge-to-spin and Spin-to-Charge Conversion in a Topological Insulator Bi 2 Te 3 Using BN/Al 2 O 3 Hybrid Tunnel Barrier

One of the most striking properties of three-dimensional topological insulators (TIs) is spin-momentum locking, where the spin is locked at right angles to momentum and hence an unpolarized charge current creates a net spin polarization. Alternatively, if a net spin is injected into the TI surface state system, it is distinctively associated with a unique carrier momentum and hence should generate a charge accumulation, as in the so-called inverse Edelstein effect. Here using a Fe/Al 2 O 3 /BN tunnel barrier, we demonstrate both effects in a single device in Bi 2 Te 3 : the electrical detection of the spin accumulation generated by an unpolarized current flowing through the surface states, and that of the charge accumulation generated by spins injected into the surface state system. This work is the first to utilize BN as part of a hybrid tunnel barrier on TI, where we observed a high spin polarization of 93% for the TI surfaces states. The reverse spin-to-charge measurement is an independent confirmation that spin and momentum are locked in the surface states of TI, and offers additional avenues for spin manipulation. It further demonstrates the robustness and versatility of electrical access to the spin system within TI surface states, an important step towards its utilization in TI-based spintronics devices.

36 MATERIALS SCIENCE↗

Evolution of the Surface Science of Catalysis from Single Crystals to Metal Nanoparticles under Pressure

Vacuum studies of metal single crystal surfaces using electron and molecular beam scattering revealed that the surface atoms relocate when the surface is clean (reconstruction) and when it is covered by adsorbates (adsorbate induced restructuring). It was also discovered that atomic steps and other low coordination surface sites are active for breaking chemical bonds (H-H, O=O, C-H, C=O and C-C) with high reaction probability. Investigations at high reactant pressures using sum frequency generation (SFG)--vibrational spectroscopy and high pressure scanning tunneling microscopy (HPSTM) revealed bond breaking at low reaction probability sites on the adsorbate-covered metal surface, and the need for adsorbate mobility for continued turnover. Since most catalysts (heterogeneous, enzyme and homogeneous) are nanoparticles, colloid synthesis methods were developed to produce monodispersed metal nanoparticles in the 1-10 nm range and controlled shapes to use them as new model catalyst systems in two-dimensional thin film form or deposited in mesoporous three-dimensional oxides. Studies of reaction selectivity in multipath reactions (hydrogenation of benzene, cyclohexene and crotonaldehyde) showed that reaction selectivity depends on both nanoparticle size and shape. The oxide-metal nanoparticle interface was found to be an important catalytic site because of the hot electron flow induced by exothermic reactions like carbon monoxide oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-Short Laser Absorption In Solid Targets

With the rapid development and continuously improving technology of subpicosecond laser pulse generation, new interesting physical problems are now investigated. Among them the laser light absorption in solid targets. During the interaction with solid targets, high intensity laser pulses are absorbed by electrons in optical skin depths, leading to rapid ionization before that significant ablation of solid material takes place. The ultra-short laser is absorbed in the overdense plasma through the electron-ion collisions (normal skin effect) or collisionless mechanisms (anomalous skin effect or sheath inverse bremsstrahlung). These two regimes depend on the laser intensity, the plasma temperature and the ionization state Z. In this work we solve numerically the Fokker-Planck equation to compute the electron distribution function in the skin layer. In the second step we compute the surface impedance and we deduce the absorption coefficient.

36 MATERIALS SCIENCE↗

Generating Sub-Micron Features On Rough Surfaces Using Optical Trap Assisted Nanopatterning

Near-field intensity enhancement enables laser modification of materials with feature sizes below the classical diffraction limit. However, the need to maintain close distances between the objective element and the substrate typically limit demonstrations of this technology to flat surfaces, even though there are many cases where the ability to produce sub-micron features on rough or structured surfaces are needed. Here, we show the use of a new technique, optical trap assisted nanopatterning (OTAN), for the production of nanoscale features on rippled substrates. The ability to position a microbead near-field objective close to the surface without the need for active feedback and control allows one to continuously move the bead across a rough surface without sticking. Sub-micron patterning of polyimide is demonstrated on surfaces with 1.1 {mu}m steps showing good uniformity. Finally, the enabling technology allows for straightforward parallelization where multiple patterns can be created simultaneously over surface.

36 MATERIALS SCIENCE↗

Local changes of work function near rough features on Cu surfaces operated under high external electric field

Metal surfaces operated under high electric fields produce sparks even if they are held in ultra high vacuum. In spite of extensive research on the topic of vacuum arcs, the mystery of vacuum arc origin still remains unresolved. The indications that the sparking rates depend on the material motivate the research on surface response to extremely high external electric fields. In this work by means of density-functional theory calculations we analyze the redistribution of electron density on (100) Cu surfaces due to self-adatoms and in presence of high electric fields from −1 V/nm up to −2 V/nm (−1 to −2 GV/m, respectively). We also calculate the partial charge induced by the external field on a single adatom and a cluster of two adatoms in order to obtain reliable information on charge redistribution on surface atoms, which can serve as a benchmarking quantity for the assessment of the electric field effects on metal surfaces by means of molecular dynamics simulations. Furthermore, we investigate the modifications of work function around rough surface features, such as step edges and self-adatoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dramatically enhanced self-assembly of GeSi quantum dots with superior photoluminescence induced by the substrate misorientation

A dramatically enhanced self-assembly of GeSi quantum dots (QDs) is disclosed on slightly miscut Si (001) substrates, leading to extremely dense QDs and even a growth mode transition. The inherent mechanism is addressed in combination of the thermodynamics and the growth kinetics both affected by steps on the vicinal surface. Moreover, temperature-dependent photoluminescence spectra from dense GeSi QDs on the miscut substrate demonstrate a rather strong peak persistent up to 300 K, which is attributed to the well confinement of excitons in the dense GeSi QDs due to the absence of the wetting layer on the miscut substrate.

36 MATERIALS SCIENCE↗

First-principles studies on molecular beam epitaxy growth of GaAs 1-x Bi x

We investigate the molecular beam epitaxy (MBE) growth of GaAs 1-x Bi x film using density functional theory with spin-orbit coupling to understand the growth of this film, especially the mechanisms of Bi incorporation. We study the stable adsorption structures and kinetics of the incident molecules (As₂ molecule, Ga atom, Bi atom, and Bi₂ molecule) on the (2 x 1)-Ga sub ||Bi surface and a proposed q (1 x 1)-Ga sub ||AsAs surface has a quasi-(1 x 1) As layer above the Ga-terminated GaAs substrate and a randomly oriented As dimer layer on top. We obtain the desorption and diffusion barriers of the adsorbed molecules and also the reaction barriers of three key processes related to Bi evolution, namely, Bi incorporation, As/Bi exchange, and Bi clustering. The results help explain the experimentally observed dependence of Bi incorporation on the As/Ga ratio and growth temperature. Furthermore, we find that As₂ exchange with Bi of the (2 x 1)-Ga sub ||Bi surface is a key step controlling the kinetics of the Bi incorporation. Finally, we explore two possible methods to enhance the Bi incorporation, namely, replacing the MBE growth mode from codeposition of all fluxes with a sequential deposition of fluxes and applying asymmetric in-plane strain to the substrate.

Luo, Guangfu↗

Temperature programed desorption of C{sub 2}H{sub 4} from pure and graphite-covered Pt(111)

Ethylene adsorption on Pt(111) at 95 K was studied by temperature programed desorption (TPD), low energy electron diffraction (LEED), and x-ray photoelectron spectroscopy. Ethylene desorbs reversibly at 112 K and irreversibly at 255 and 280 K. It is generally accepted that annealing of ethylene adsorbed on Pt(111) to 300 K results in a dehydrogenation to ethylidyne through an ethylidene intermediate. This was observed by a hydrogen desorption peak at 300 K. Also, hydrogenation of the adsorbed ethylene was observed by a small ethane desorption peak at 300 K. Upon heating to 700 K, the ethylidyne species will further dehydrogenate to carbidic carbon species with hydrogen desorption peaks at 460 and 640 K. If the carbidic species is heated to higher temperatures (up to 1000 K), it will further dehydrogenate and form graphitic islands which will accumulate by Ostwald ripening in larger islands at the step edges of the surface. After annealing the sample to 1000 K, a statistically distributed 8x8 superstructure of these graphite islands is achieved, as interpreted from A pattern in the LEED data. The TPD results indicate that ethylene adsorption on Pt(111) results in the formation of graphitic islands upon heating to 1000 K, contrary to previous conjectures of formation of a full graphite monolayer.

36 MATERIALS SCIENCE↗

Semiconductor–Metal Phase Transition and “Tristable” Electrical Switching in Nanocrystalline Vanadium Oxide Films on Silicon

Temperature dependences of the ac conductivity of nanocrystalline mixed vanadium oxide films on silicon revealed a multistep shape of the hysteresis loop observed during the semiconductor–metal phase transition in VO{sub 2}, which was not manifested in the case of dc measurements. These peculiarities are related to the size effect, heterophase character of vanadium oxide films, and different types of charge carriers in the bulk of nanocrystallites and on their surfaces. The appearance of steps is explained by the phase transition taking place in separate groups of crystallites with close dimensions. The phenomenon of “tristable” electrical switching in these vanadium oxide films was observed for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Broad Stability Investigation of Nb-Doped SrCoO 2.5+δ as a Reversible Oxygen Electrode for Intermediate-Temperature Solid Oxide Fuel Cells

The present work reports a systematic study on the structural, thermal, electrical and electrochemical stability of SrCo 1–x Nb x O 2.5+δ series as a potential reversible oxygen-electrode for intermediate-temperature solid oxide fuel cells. The identified best composition is x = 0.10, which exhibits a stable pseudo primitive cubic structure at <700°C and a reversible oxygen redox reaction at 350°C. The conductivity of this material is p-type and also exhibits a peak at 350°C, implying that the electron hole conduction is closely associated with the oxygen nonstoichiometry. Electrochemical impedance spectroscopy analysis indicates a low polarization resistance rate-limited by a slower surface O 2 dissociation step. Altogether, the material is thermally stable and oxygen redox reversible below 700°C, above which a catalytically less active brownmillerite SrCoO 2.5 is formed.

25 ENERGY STORAGE↗