Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACTUATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Validation of thermal models for a prototypical MEMS thermal actuator.

This report documents technical work performed to complete the ASC Level 2 Milestone 2841: validation of thermal models for a prototypical MEMS thermal actuator. This effort requires completion of the following task: the comparison between calculated and measured temperature profiles of a heated stationary microbeam in air. Such heated microbeams are prototypical structures in virtually all electrically driven microscale thermal actuators. This task is divided into four major subtasks. (1) Perform validation experiments on prototypical heated stationary microbeams in which material properties such as thermal conductivity and electrical resistivity are measured if not known and temperature profiles along the beams are measured as a function of electrical power and gas pressure. (2) Develop a noncontinuum gas-phase heat-transfer model for typical MEMS situations including effects such as temperature discontinuities at gas-solid interfaces across which heat is flowing, and incorporate this model into the ASC FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (3) Develop a noncontinuum solid-phase heat transfer model for typical MEMS situations including an effective thermal conductivity that depends on device geometry and grain size, and incorporate this model into the FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (4) Perform combined gas-solid heat-transfer simulations using Calore with these models for the experimentally investigated devices, and compare simulation and experimental temperature profiles to assess model accuracy. These subtasks have been completed successfully, thereby completing the milestone task. Model and experimental temperature profiles are found to be in reasonable agreement for all cases examined. Modest systematic differences appear to be related to uncertainties in the geometric dimensions of the test structures and in the thermal conductivity of the polycrystalline silicon test structures, as well as uncontrolled nonuniform changes in this quantity over time and during operation.

42 ENGINEERING↗

Capturing Time-Varying Wake Dynamics Using Hybridized Actuator Disks in Steady-State Simulations for Improved Optimization Efficiency

When optimizing turbine blade properties, using a time varying, unsteady simulation allows for high-fidelity representations of the wake dynamics. Unfortunately these types of optimizations are prohibitively expensive in terms of computation time and memory requirements. This presentation aims to show a method of transferring the wake dynamics of an unsteady simulation to a much more computationally tractable steady state simulation using hybrid actuator disks informed by unsteady, actuator line model dynamics.

actuator disk model↗

Strategies for Constructing and Operating DNA Origami Linear Actuators

Abstract Linear actuators are ubiquitous components at all scales of engineering. DNA nanotechnology offers a unique opportunity for bottom‐up assembly at the molecular scale, providing nanoscale precision with multiple methods for constructing and operating devices. In this paper, DNA origami linear actuators with up to 200 nm travel, based on a rail threading a topologically locked slider, are demonstrated. Two strategies, one‐ and two‐pot assembly, are demonstrated whereby the two components are folded from one or two DNA scaffold strands, respectively. In order to control the position of the slider on the rail, the rail and the inside of the slider are decorated with single‐stranded oligonucleotides with distinct sequences. Two positioning strategies, based on diffusion and capture of signaling strands, are used to link the slider reversibly to determined positions on the rail with high yield and precision. These machine components provide a basis for applications in molecular machinery and nanoscale manufacture including programmed chemical synthesis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructured CVD Tungsten Carbide Coating on Aircraft Actuators and Gearbox Shafts Reduces Oil Leakage and Improves Durability

Wear and corrosion of aircraft actuator parts, helicopter gearbox rotating shafts and wear of seals working against these parts can lead to oil leaks which require expensive maintenance and increase the risk of failure. The Hardide® nanostructured chemical vapor deposition (CVD) Tungsten Carbide coating was tested on metal parts working against seals as an approach to reduce oil leakage from gearboxes and actuators and increase maintenance intervals. The coating protects metal pistons and shafts from abrasion and corrosion, keeping their surface roughness parameters within optimum ranges for longer; this reduces seal wear and makes the whole unit more durable and reliable. The 50-100 micron-thick CVD Hardide coating can be applied uniformly on internal and external surfaces and has enhanced fatigue and anti-galling properties. The coating has high wear resistance outperforming Hard Chrome by 14 times and Thermal Spray WC-Co (12%) by three times. The fine-grain coating nanostructure wears uniformly so even worn Hardide coating shows no hard micro-grain asperities which are abrasive for seals. The coating is free from porosity and from Cobalt binder and is an effective barrier against corrosion. As a result the coating keeps the optimal seal-friendly surface finish for longer even in abrasive and corrosive environments. The coating was qualified by Airbus as an environmentally friendly replacement for Hard Chrome plating.

36 MATERIALS SCIENCE↗

A code-independent generalized actuator line model for wind farm aerodynamics over simple and complex terrain

Actuator line model representations of wind turbines reduce the simulation cost of wind farm aerodynamics relative to blade geometry resolving simulations. However, most implementations are code specific and may not have proper load balancing when run in parallel. Here, a generalized actuator line model (GALM) is developed to overcome this implementation drawback of existing approaches. The GALM can be coupled to any existing microscale solver with minimal or no modifications. The coupling of our GALM model with the open-source microscale code CgWind is used to demonstrate both its ease of use and fidelity. The results obtained from the coupled-model simulations are validated for both isolated turbine in wind tunnel experiments and measurements in offshore wind farm. Finally, an operational wind farm over complex terrain is demonstrated. The simulations show that wake meandering and power production are strongly influenced by terrain impacts. Access information for obtaining the code is provided.

17 WIND ENERGY↗

Experimental results of a magnetically coupled piezoelectric actuator to relieve microchannel heat exchanger maldistribution

Refrigerant maldistribution is a common issue in microchannel heat exchangers. Refrigerant maldistribution can have significant negative effects on the heat transfer performance and increase the pressure drop, leading to increased superheat temperature at the outlet and increased compressor work, lowering system efficiency. In this work, a novel piezoelectric-driven magnetic actuator (PEDMA) was fabricated and inserted into the inlet header of the microchannel evaporator, with the goal of improving the non-uniformity of the flow distribution by regulating the flow in the header to the microchannels. Two prototype PEDMA designs were tested and showed significant impact on the refrigerant flow in the region of actuation. In the first design, the experimental data showed superheat reductions up to 9 °C when the individual channel temperatures were measured. The second design redistributed the refrigerant such that a 1% increase in capacity was calculated for the whole heat exchanger without significantly impacting the heating efficiency. The experimental results demonstrate the successful operation of the PEDMA devices and represent a new method of active flow distribution control which is based on a simple design with minimal additional energy consumption, and which can be inserted into microchannel heat exchanger headers to potentially relieve the refrigerant maldistribution.

42 ENGINEERING↗

Better Actuation Through Chemistry: Using Surface Coatings to Create Uniform Director Fields in Nematic Liquid Crystal Elastomers

Controlling the molecular alignment of liquid crystal monomers (LCMs) within nano- and microstructures is essential in manipulating the actuation behavior of nematic liquid crystal elastomers (NLCEs). In this paper, we study how to induce uniformly vertical alignment of nematic LCMs within a micropillar array to maximize the macroscopic shape change using surface chemistry. Landau–de Gennes numerical modeling suggests that it is difficult to perfectly align LCMs vertically in every pore within a poly(dimethylsiloxane) (PDMS) mold with porous channels during soft lithography. In an untreated PDMS mold that provides homeotropic anchoring of LCMs, a radially escaped configuration of LCMs is observed. Vertically aligned LCMs, a preferred configuration for actuation, are only observed when using a PDMS mold with planar anchoring. Guided by the numerical modeling, we coat the PDMS mold with a thin layer of poly(2-hydroxyethyl methacrylate) (PHEMA), leading to planar anchoring of LCM. Confirmed by polarized optical microscopy, we observe monodomains of vertically aligned LCMs within the mold, in agreement with modeling. Finally, after curing and peeling off the mold, the resulting NLCE micropillars showed a relatively large and reversible radial strain (~30%) when heated above the nematic to isotropic transition temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of eddy currents due to a vacuum chamber wall in the airgap of a moving-magnet linear actuator

This paper discusses the effects of eddy currents induced in an electrically conducting plate which is placed in the airgap of a linear synchronous actuator with moving permanent magnets. The eddy currents induced in this plate, which is part of a controlled atmosphere chamber, cause not only damping but also deteriorate the actuator performance by disturbing the position measurement with Hall sensors. Furthermore, feed-forward controllers are less effective due to the suppression of high frequent armature fields. These effects are analyzed with an analytical model and verified with finite element simulations and measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of a high Reynolds number Mach 0.9 heated jet using plasma actuators

The results of particle image velocimetry (PIV) measurements in a high subsonic, heated, jet forced using localized arc filament plasma actuators (LAFPAs) show that LAFPAs can consistently produce significant mixing enhancement over a wide range of temperatures. These actuators have been used successfully in high Reynolds number, high-speed unheated jets. The facility consists of an axisymmetric jet with different nozzle blocks of exit diameter of 2.54 cm and variable jet temperature in an anechoic chamber. The focus of this paper is on a high subsonic (M{sub j}=0.9) jet. Twelve experiments with various forcing azimuthal modes (m=0, 1, and {+-}1) and temperatures (T{sub o}/T{sub a}=1.0, 1.4, and 2.0) at a fixed forcing Strouhal number (St{sub DF}=0.3) have been conducted and PIV results compared with the baseline results to characterize the effectiveness of LAFPAs for mixing enhancement. Centerline velocity and turbulent kinetic energy as well as jet width are used for determining the LAFPAs' effectiveness. The characteristics of large-scale structures are analyzed through the use of Galilean streamlines and swirling strength. Across the range of temperatures collected, the effectiveness of LAFPAs improves as temperature increases. Possible reasons for the increase in effectiveness are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical study of boundary layer separation control using magnetogasdynamic plasma actuators

In this study, an efficient, time dependent, two-dimensional Navier-Stokes numerical code for shockwave boundary layer interaction in air is developed. Nonthermal surface plasma actuation is evaluated for effective shockwave induced boundary layer separation control within supersonic inlets. Specifically, high speed magnetogasdynamic plasma actuators are of interest. In these, localized ionization is produced close to the wall surface and then the flow is accelerated using strong magnetic fields. To replicate the experiments done at large boundary layer thickness, the code is divided into time independent and time dependent regimes to significantly reduce computation time. Computational results are in good agreement with experiments in terms of the flow structure as shown by Schlieren imaging, acetone planar laser scattering, and the static pressure profile on the test section wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current integration force and displacement self-sensing method for cantilevered piezoelectric actuators

This paper presents a new method of self-sensing both of the displacement and the external applied force at the tip of piezoelectric cantilevers. Integrated electric current across piezoelectric actuators is compensated against material nonlinearities (creep, hysteresis) to provide reliable information. We propose to compensate the hysteresis by using the Prandtl-Ishlinskii static approach while an auto regressive and moving average exogenous (ARMAX) model is used to minimize the creep influence. The quasistatic estimation, electronic circuit, and aspects related to long-term charge preservations are described or referenced. As an experiment, we tested the actuator entering in contact with a fixed force sensor. An input signal of 20 V peak-to-peak (10% of maximum range) led to force self-sensing errors inferior to {+-}8%. A final discussion about method accuracy and its limitations is made.

36 MATERIALS SCIENCE↗

On the mechanical efficiency of dielectric barrier discharge plasma actuators

The mechanical power production and electrical power consumption of the dielectric barrier discharge plasma actuator is investigated for different operating conditions. The ratio of these two values delivers the mechanical efficiency of the actuator as a flow acceleration device. The general trend is that higher carrier frequencies and voltages lead to higher values of the efficiency. The values that were found for the mechanical efficiency are very small, the highest recorded value is only 0.18%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical analysis of plasma evolution on dielectric barrier discharge plasma actuator

Time evolution of the discharge plasma in the dielectric barrier discharge (DBD) plasma actuator was simulated by the simple fluid model in which the electron and single positive ion species were considered. The characteristics of the discharge plasma evolution were investigated in detail, and the following results were obtained. When the positive-going voltage is applied, the streamer discharge is formed periodically. The periodically formed streamer expands from the exposed electrode, and its length becomes longer than the previous one. Periodic breakdown of the gas and step-by-step plasma expansion are also observed during the negative-going voltage; however, the streamer is not formed and the breakdown frequency is much higher. The simulation results with a triangular applied voltage waveform show the same characteristics as observed in the experiment; large discharge current spikes are observed during both the positive- and negative-going voltage phase, and the plasma in the negative-going voltage phase expands more smoothly than that in the positive phase because of its higher breakdown frequency. It was shown that even the simple numerical model could provide valuable insights into the physics of DBD plasma actuator; this indicates that the positive ions and electrons play a prominent role in determining the general characteristics of the plasma evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Actuating dielectric elastomers in pure shear deformation by elastomeric conductors

Pure shear experiments are commonly used to characterize dielectric elastomer (DE) material properties and to evaluate DE actuator/generator performance. It is increasingly important for many applications to replace conventional carbon grease electrodes with stretchable elastomeric conductors. We formulate a theory for DE with elastomeric conductors, synthesize transparent hydrogel as ionic conductors, and measure actuation of DE in pure shear deformation. Maximum 67% actuation strain is demonstrated. The theory agrees well with our measurement and also correlates well with reported experiments on DE with electronic conductors.

36 MATERIALS SCIENCE↗

Study of flow fields induced by surface dielectric barrier discharge actuator in low-pressure air

Surface dielectric barrier discharge (SDBD) is a promising method for a flow control. Flow fields induced by a SDBD actuator driven by the ac voltage in static air at low pressures varying from 1.0 to 27.7 kPa are measured by the particle image velocimetry method. The influence of the applied ac voltage frequency and magnitude on the induced flow fields is studied. The results show that three different classes of flow fields (wall jet flow field, complex flow field, and vortex-shape flow field) can be induced by the SDBD actuator in the low-pressure air. Among them, the wall jet flow field is the same as the tangential jet at atmospheric pressure, which is, together with the vertical jet, the complex flow field. The vortex-shape flow field is composed of one vertical jet which points towards the wall and two opposite tangential jets. The complex and the vortex-shape flow fields can be transformed to the wall jet flow field when the applied ac voltage frequency and magnitude are changed. It is found that the discharge power consumption increases initially, decreases, and then increases again at the same applied ac voltage magnitude when the air pressure decreases. The tangential velocity of the wall jet flow field increases when the air pressure decreases. It is however opposite for the complex flow field. The variation of the applied ac voltage frequency influences differently three different flow fields. When the applied ac voltage magnitude increases at the same applied ac voltage frequency, the maximal jet velocity increases, while the power efficiency increases only initially and then decreases again. The discharge power shows either linear or exponential dependences on the applied ac voltage magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A novel in situ device based on a bionic piezoelectric actuator to study tensile and fatigue properties of bulk materials

In this work, a miniaturized device based on a bionic piezoelectric actuator was developed to investigate the static tensile and dynamic fatigue properties of bulk materials. The device mainly consists of a bionic stepping piezoelectric actuator based on wedge block clamping, a pair of grippers, and a set of precise signal test system. Tensile and fatigue examinations share a set of driving system and a set of signal test system. In situ tensile and fatigue examinations under scanning electron microscope or metallographic microscope could be carried out due to the miniaturized dimensions of the device. The structure and working principle of the device were discussed and the effects of output difference between two piezoelectric stacks on the device were theoretically analyzed. The tensile and fatigue examinations on ordinary copper were carried out using this device and its feasibility was verified through the comparison tests with a commercial tensile examination instrument.

36 MATERIALS SCIENCE↗

Note: A short-pulse high-intensity molecular beam valve based on a piezoelectric stack actuator

Solenoid and piezoelectric disk valves, which are widely used to generate molecular beam pulses, still suffer from significant restrictions, such as pulse durations typically >50 μs, low repetition rates, and limited gas flows and operational times. Much of this arises owing to the limited forces these actuators can achieve. To overcome these limitations, we have developed a new pulsed valve based on a high-force piezoelectric stack actuator. We show here that operation with pulse durations as low as 20 μs and repetition rates up to 100 Hz can be easily achieved by operating the valve in conjunction with a commercial fast high-voltage switch. We outline our design and demonstrate its performance with molecular beam characterization via velocity map ion imaging.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: A simple vibrating orifice monodisperse droplet generator using a hard drive actuator arm

We propose that the rotary voice coil actuators found in magnetic hard drives are fit to supercede loudspeakers as expedient vibration sources in the laboratory setting. A specific use case is the excitation of a liquid jet to induce controlled breakup into monodisperse droplets. Like loudspeakers, which are typically used for prototyping such devices, hard drive actuators are cheap and ubiquitous, but they are less unwieldy and supply greater amplitudes without producing noise. Frequencies between 0 and 17 kHz, and likely beyond, can be reproduced reliably. No machining tools or amplifying electronics are needed for the construction and operation of the presented droplet generator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗