Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

ALD of Al2O3 for Highly Improved Performance in Li-Ion Batteries

Significant advances in energy density, rate capability and safety will be required for the implementation of Li-ion batteries in next generation electric vehicles. We have demonstrated atomic layer deposition (ALD) as a promising method to enable superior cycling performance for a vast variety of battery electrodes. The electrodes range from already demonstrated commercial technologies (cycled under extreme conditions) to new materials that could eventually lead to batteries with higher energy densities. For example, an Al2O3 ALD coating with a thickness of ~ 8 A was able to stabilize the cycling of unexplored MoO3 nanoparticle anodes with a high volume expansion. The ALD coating enabled stable cycling at C/2 with a capacity of ~ 900 mAh/g. Furthermore, rate capability studies showed the ALD-coated electrode maintained a capacity of 600 mAh/g at 5C. For uncoated electrodes it was only possible to observe stable cycling at C/10. Also, we recently reported that a thin ALD Al2O3 coating with a thickness of ~5 A can enable natural graphite (NG) electrodes to exhibit remarkably durable cycling at 50 degrees C. The ALD-coated NG electrodes displayed a 98% capacity retention after 200 charge-discharge cycles. In contrast, bare NG showed a rapid decay. Additionally, Al2O3 ALD films with a thickness of 2 to 4 A have been shown to allow LiCoO2 to exhibit 89% capacity retention after 120 charge-discharge cycles performed up to 4.5 V vs Li/Li+. Bare LiCoO2 rapidly deteriorated in the first few cycles. The capacity fade is likely caused by oxidative decomposition of the electrolyte at higher potentials or perhaps cobalt dissolution. Interestingly, we have recently fabricated full cells of NG and LiCoO2 where we coated both electrodes, one or the other electrode as well as neither electrode. In creating these full cells, we observed some surprising results that lead us to obtain a greater understanding of the ALD coatings. We have also recently coated a binder free LiNi0.04Mn0.04Co02O2 electrode containing 5 wt% single-walled carbon nanotubes as the conductive additive and demonstrated both high rate capability as well as the ability to cycle the cathode to 5 V vrs. Li/Li+. Finally, we coated a Celgard (TM) separator and enabled stable cycling in a high dielectric electrolyte. These results will be presented in detail.

25 ENERGY STORAGE↗

Parallel performance of algebraic multigrid domain decomposition

Algebraic multigrid (AMG) is a widely used scalable solver and preconditioner for large-scale linear systems resulting from the discretization of a wide class of elliptic PDEs. While AMG has optimal computational complexity, the cost of communication has become a significant bottleneck that limits its scalability as processor counts continue to grow on modern machines. This article examines the design, implementation, and parallel performance of a novel algorithm, algebraic multigrid domain decomposition (AMG-DD), designed specifically to limit communication. The goal of AMG-DD is to provide a low-communication alternative to standard AMG V-cycles by trading some additional computational overhead for a significant reduction in communication cost. Numerical results show that AMG-DD achieves superior accuracy per communication cost compared with AMG, and speedup over AMG is demonstrated on a large GPU cluster.

97 MATHEMATICS AND COMPUTING↗

Non-singlet quark helicity $\mathrm{PDF}$s of the nucleon from pseudo-distributions

The non-singlet helicity quark parton distribution functions (PDFs) of the nucleon are determined from lattice QCD, by jointly leveraging pseudo-distributions and the distillation spatial smearing paradigm. A Lorentz decomposition of appropriately isolated space-like matrix elements reveals pseudo-distributions that contain information on the leading-twist helicity PDFs, as well as an invariant amplitude that induces an additional z 2 contamination of the leading-twist signal. An analysis of the short-distance behavior of the space-like matrix elements using matching coefficients computed to next-to-leading order (NLO) exposes the desired PDF up to this additional z 2 contamination. Due to the non-conservation of the axial current, we elect to isolate the helicity PDFs normalized by the nucleon axial charge at the same scale μ 2 . The leading-twist helicity PDFs as well as several sources of systematic error, including higher-twist effects, discretization errors, and the aforementioned z 2 contaminating amplitude are jointly determined by characterizing the computed pseudo-distribution in a basis of Jacobi polynomials. The Akaike Information Criterion is exploited to effectively average over distinct model parameterizations and cuts on the pseudo-distribution. Encouraging agreement is observed with recent global analyses of each non-singlet quark helicity PDF, notably a rather small non-singlet anti-quark helicity PDF for all quark momentum fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-pressure powder x-ray diffraction study of EuVO{sub 4}

The high-pressure structural behavior of europium orthovanadate has been studied using in-situ, synchrotron based, high-pressure x-ray powder diffraction technique. Angle-dispersive x-ray diffraction measurements were carried out at room temperature up to 34.7 GPa using a diamond-anvil cell, extending the pressure range reported in previous experiments. We confirmed the occurrence of zircon–scheelite phase transition at 6.8 GPa and the coexistence of low- and high-pressure phases up to 10.1 GPa. In addition, clear evidence of a scheelite–fregusonite transition is found at 23.4 GPa. The fergusonite structure remains stable up to 34.7 GPa, the highest pressure reached in the present measurements. A partial decomposition of EuVO{sub 4} was also observed from 8.1 to 12.8 GPa; however, this fact did not preclude the identification of the different crystal structures of EuVO{sub 4}. The crystal structures of the different phases have been Rietveld refined and their equations of state (EOS) have been determined. The results are compared with the previous experimental data and theoretical calculations. - Graphical abstract: The high-pressure structural sequence of EuVO{sub 4}. - Highlights: • EuVO{sub 4} is studied under pressure up to 35 GPa using synchrotron XRD. • The zircón–scheelite–fergusonite structural sequence is observed. • Crystal structures are refined and equations of state determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal decomposition of neptunyl ammonium nitrate: mechanistic insights and structural characterization of the Np 2 O 5 intermediate phase

Neptunium (Np) possesses a rich and unique chemistry that often diverges from other actinide elements yet remains relatively underexplored compared with the other light actinides. A resurgence of interest in Np has been spurred by the application of 237 Np for plutonium-238 ( 238 Pu) production for use in radioisotope thermoelectric generators (RTGs), necessitating evaluation of Np chemical reactions and materials. The work presented here studied the thermal decomposition of neptunyl ammonium nitrate (NH 4 Np VI O 2 (NO 3 ) 3 ) for synthesis of neptunium dioxide (NpO 2 ), which is the target material used for production of 238 Pu. Additionally, structural characterization of the intermediate solid Np pentoxide (Np 2 O 5 ) was performed. Advanced solid-state characterization techniques, including simultaneous thermal analysis (STA), powder X-ray diffraction (pXRD), Raman spectroscopy, and density functional theory (DFT) modeling have been combined to study the reaction pathways. Analysis revealed that NH 4 Np VI O 2 (NO 3 ) 3 thermally decomposes to a proposed neptunyl nitrate intermediate, followed by Np 2 O 5 and finally NpO 2 , all within the temperature range of 150 °C–600 °C. Further characterization of the pentoxide intermediate provided the first Raman spectra of pure-phase Np 2 O 5 and associated DFT modeling confirmed Raman peak assignments for this phase. These findings provide mechanistic information to advance production of the critical radioisotope 238 Pu and advance the state of knowledge on Np materials chemistry using modern characterization techniques.

Lawson, Kathryn M. [Oak Ridge National Laboratory ↗

Spatial decomposition of magnetic anisotropy in magnets: Application to doped Fe 16 N 2

We propose a scheme of decomposition of the total relativistic energy in solids to intra- and interatomic contributions. The method is based on a site variation of such fundamental constant as the speed of light. As a practical illustration of the method, we tested such decomposition in the case of a spin-orbit interaction variation for the decomposition of the magnetic anisotropy energy (MAE) in CoPt. We further studied the α" - Fe 16 N 2 magnet doped by Bi, Sb, Co, and Pt atoms. It was found that the addition of Pt atoms can enhance the MAE by as much as five times while Bi and Sb substitutions double the total MAE. Using the proposed technique, we demonstrate the spatial distribution of these enhancements. Our studies also suggest that Sb, Pt, and Co substitutions could be synthesized by experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of finite particle number sampling on baryon number fluctuations

The effects of finite particle number sampling on the net baryon number cumulants, extracted from fluid dynamical simulations, are studied. The commonly used finite particle number sampling procedure introduces an additional Poissonian (or multinomial if global baryon number conservation is enforced) contribution which increases the extracted moments of the baryon number distribution. If this procedure is applied to a fluctuating fluid dynamics framework, one severely overestimates the actual cumulants. We show that the sampling of so-called test particles suppresses the additional contribution to the moments by at least one power of the number of test particles. We demonstrate this method in a numerical fluid dynamics simulation that includes the effects of spinodal decomposition due to a first-order phase transition. Furthermore, in the limit where antibaryons can be ignored, we derive analytic formulas which capture exactly the effect of particle sampling on the baryon number cumulants. These formulas may be used to test the various numerical particle sampling algorithms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Duality-Free Decomposition Based Data-Driven Stochastic Security-Constrained Unit Commitment

To incorporate the superiority of both stochastic and robust approaches, a data-driven stochastic optimization is employed to solve the security-constrained unit commitment model. This approach makes the most use of the historical data to generate a set of possible probability distributions for wind power outputs and then it optimizes the unit commitment under the worst-case probability distribution. However, this model suffers from huge computational burden, as a large number of scenarios are considered. To tackle this issue, a duality-free decomposition method is proposed in this paper. This approach does not require doing duality, which can save a large set of dual variables and constraints, and therefore reduces the computational burden. In addition, the inner max-min problem has a special mathematical structure, where the scenarios have the similar constraint. Thus, the max-min problem can be decomposed into independent sub-problems to be solved in parallel, which further improves the computational efficiency. A numerical study on an IEEE 118-bus system with practical data of a wind power system has demonstrated the effectiveness of the proposal.

42 ENGINEERING↗

Signal processing method and system for noise removal and signal extraction

A signal processing method and system combining smooth level wavelet pre-processing together with artificial neural networks all in the wavelet domain for signal denoising and extraction. Upon receiving a signal corrupted with noise, an n-level decomposition of the signal is performed using a discrete wavelet transform to produce a smooth component and a rough component for each decomposition level. The n.sup.th level smooth component is then inputted into a corresponding neural network pre-trained to filter out noise in that component by pattern recognition in the wavelet domain. Additional rough components, beginning at the highest level, may also be retained and inputted into corresponding neural networks pre-trained to filter out noise in those components also by pattern recognition in the wavelet domain. In any case, an inverse discrete wavelet transform is performed on the combined output from all the neural networks to recover a clean signal back in the time domain.

47 OTHER INSTRUMENTATION↗

Crystal structure and magnetic properties of Pr- and Ti-substituted La{sub 2}RuO{sub 5}

Highlights: • Synthesis of polycrystalline Pr and Ti co-substituted La{sub 2}RuO{sub 5} with soft chemistry. • Investigation of structure–property relationship of the dimerization transition. • Additive behavior of structural changes caused by either Pr or Ti substitution. • Additive behavior of ht-phase paramagnetism of Pr and Ti substitution. • Additive influence of Pr and Ti substitution on the dimerization transition. - Abstract: Polycrystalline samples of Pr- and Ti-substituted La{sub 2}RuO{sub 5} were prepared applying a soft-chemistry route based on the thermal decomposition of citrate-stabilized precursors. The simultaneous substitution on the La-sites by Pr and on the Ru-sites by Ti results in samples of the composition La{sub 2−x}Pr{sub x}Ru{sub 1−y}Ti{sub y}O{sub 5} with 0 ≤ x ≤ 0.75 and 0 ≤ y ≤ 0.4. The crystal structures of these compounds were analyzed by Rietveld refinement of powder X-ray diffraction patterns. For pure La{sub 2}RuO{sub 5} a structural transition from a monoclinic room-temperature modification to a triclinic low-temperature structure was found at 161 K. This structural change is linked to a low-temperature long-range ordered spin-singlet ground state formed by Ru{sup 4+} spin-moments. Both the structural transition and the formation of the singlet ground state become progressively suppressed with higher Ti contents, while the Pr substitution has only a minor influence on the dimerization. The behavior of the Curie–Weiss temperatures can be explained assuming two almost independent magnetic sublattices corresponding to the ruthenium and the rare-earth ions, respectively. For all investigated properties, i.e. crystal structure, magnetic susceptibilities, and dimerization temperature T{sub d}, a completely additive behavior of the effects of Pr-substitution and Ti-substitution is observed.

36 MATERIALS SCIENCE↗

Operator inference for non-intrusive model reduction with quadratic manifolds

This paper proposes a novel approach for learning a data-driven quadratic manifold from high-dimensional data, then employing this quadratic manifold to derive efficient physics-based reduced-order models. The key ingredient of the approach is a polynomial mapping between high-dimensional states and a low-dimensional embedding. This mapping consists of two parts: a representation in a linear subspace (computed in this work using the proper orthogonal decomposition) and a quadratic component. The approach can be viewed as a form of data-driven closure modeling, since the quadratic component introduces directions into the approximation that lie in the orthogonal complement of the linear subspace, but without introducing any additional degrees of freedom to the low-dimensional representation. Combining the quadratic manifold approximation with the operator inference method for projection-based model reduction leads to a scalable non-intrusive approach for learning reduced-order models of dynamical systems. Further, applying the new approach to transport-dominated systems of partial differential equations illustrates the gains in efficiency that can be achieved over approximation in a linear subspace.

42 ENGINEERING↗

Modifications to the Bubble experiment and preparation for additional irradiations

SHINE Medical Technologies is planning to use neutron-induced fission in a subcritical low-enriched-uranium uranyl sulfate target solution for production of 99 Mo. During this operation, the solution will undergo self-heating due to fissioning of the uranium, radiolytic decomposition of the water, and circulation due to thermal gradients generated in the solution, and will be cooled by cooling tubes running through the annulus and from cooling outside the annulus. Because the formation of the radiolysis-induced bubbles (H 2 and O 2 ) and their size and dynamics will impact the operational parameters of the liquid target, an understanding of bubble behavior is critical for the ability to predict the behavior of the target solution during this operation. It is also important to be able to predict the thermal gradients and the circulation in the vessel. Researchers at Argonne National Laboratory have designed an experimental setup to study radiolytic gas formation in uranyl sulfate under direct electron beam irradiation and have conducted initial experiments. Results of those experiments provided invaluable information on thermal hydraulic behavior of the solution and some information on bubble formation and behavior, but those initial experiments fell short in the measurements of the gas generation rates and bubble behavior. To address the shortcomings of the original experiment, the irradiation setup was modified to improve our abilities to measure gas generation rates and measure the temperature distribution in the solution with better precision. Modifications to the experimental setup and preparation for the irradiations are described below.

07 ISOTOPE AND RADIATION SOURCES↗

A Sparse and Low Rank Penalized Signal Decomposition Model with Constraints: Anomaly Detection in PV Systems

Recently, robust PCA has seen its wide application in various industries for its ability to perform the task of anomaly detection. The essence of robust PCA approach is to break down the signal into a low rank component and sparse component. In many applications, a simple breakdown of the signal without accounting for the signs of low rank components and sparse components would violate the physical constraints of the decomposed signal. In addition, often times, the signals in the real world collected for a long duration has smooth changes within a day and between days. As an example, the power signals collected in a photovoltaic (PV) system are cyclostationary, exhibiting these characteristics. Neglecting the smoothness of signals would result in miss detection of anomalous signals which are smooth within a day but non-smooth between days and vice versa. In this paper, we developed a signal decomposition approach for the purpose of anomaly detection based on the idea of low rank and sparse decomposition taking into consideration the signs of the decomposed low rank and sparse components and the within-day and between-day smooth changes in the original signals. The proposed unsupervised approach for fault detection eliminates the need for faulty samples required by other machine learning methods. It does not require the full I-V characteristics to work. Furthermore, there is no need for complex modelling of PV systems as in the case of power loss analysis. Using Monte Carlo simulations, we demonstrate the ability of our proposed approach for detecting anomalies of different duration and severity in PV systems.

14 SOLAR ENERGY↗

In-situ X-ray diffraction study of carbonate formation and decomposition in perovskite-type BCFZ

The effect of CO{sub 2} on the two phase perovskite with average composition of BaCo{sub 0.4}Fe{sub 0.4}Zr{sub 0.2}O{sub 3-{delta}} is investigated by in-situ X-ray diffraction (XRD) as well as transmission electron microscopy (TEM). Partial decomposition of the BCFZ into high-temperature rhombohedral BaCO{sub 3} polymorph was observed during annealing in an atmosphere, which contained 50 vol% CO{sub 2}/50 vol% N{sub 2} at 1173 K. This carbonate structure is not quenchable and cannot be detected by ex-situ methods. Additionally, the reversible phase transition of BaCO{sub 3} from orthorhombic to rhombohedral to cubic at different temperatures accompanied by formation of CoO was shown by in-situ XRD and TEM. Furthermore, complete regeneration of perovskite phase was obtained after high-temperature treatment under CO{sub 2}-free conditions. -- Graphical abstract: In-situ XRD of BCFZ powder in the atmosphere containing 50% CO{sub 2} and 50% N{sub 2} at different temperatures showing formation of BaCO{sub 3} and their phase transition. Display Omitted Highlights: {yields} Partial BCFZ decomposition. {yields} Rapid formation of rhombohedral BaCO{sub 3} after exposure of the CO{sub 2} at 1173 K. {yields} Reversible phase transition of BaCO{sub 3}. {yields} Formation of CoO and tetragonal disordered Fe-enriched perovskite phase. {yields} Complete regeneration of BCFZ after removing of CO{sub 2}.

36 MATERIALS SCIENCE↗

Low-field magnetoresistance up to 400 K in double perovskite Sr{sub 2}FeMoO{sub 6} synthesized by a citrate route

A wet-chemistry technique, namely the citrate route, has been used to prepare high-quality polycrystalline samples of double perovskite Sr{sub 2}FeMoO{sub 6}. We report on the evolution of magnetic and magnetoresistive properties of the synthesized samples as a function of three parameters (i) the pH of the starting solution, (ii) the decomposition temperature of the citrate precursors and (iii) the sintering conditions. The low-field magnetoresistance (LFMR) value of our best samples is as high as 5% at room temperature for an applied magnetic field of 1 kOe. Additionally, the distinguishing feature of these samples is the persistence of LFMR, with a reasonably large value, up to 400 K which is a crucial parameter for any practical application. Our study indicates that the enhancement of LFMR observed is due to a good compromise between the grain size distribution and their magnetic polarization. -- Graphical abstract: The microstructure (left panel) and corresponding low-field magnetoresistance of one of the Sr{sub 2}FeMoO{sub 6} samples synthesized in the course of this work. Highlights: • Samples of Sr{sub 2}FeMoO{sub 6} are prepared using a citrate route under varying conditions. • Magnetoresistive properties are improved and optimized. • Low-field magnetoresitence values as large as 5% at 300 K/1 kOe are reported. • Persistence of low-field magnetoresistance up to 400 K.

36 MATERIALS SCIENCE↗

Spin projection and spin current density within relativistic electronic-transport calculations

A spin projection scheme is presented which allows the decomposition of the electric conductivity into two different spin channels within fully relativistic ab initio transport calculations that account for the impact of spin-orbit coupling. This is demonstrated by calculations of the spin-resolved conductivity of Fe{sub 1-x}Cr{sub x} and Co{sub 1-x}Pt{sub x} disordered alloys on the basis of the corresponding Kubo-Greenwood equation implemented using the Korringa-Kohn-Rostoker coherent-potential approximation band-structure method. In addition, results for the residual resistivity of diluted Ni-based alloys are presented that are compared to theoretical and experimental ones that rely on Mott's two-current model for spin-polarized systems. The application of the scheme to deal with the spin-orbit induced spin-Hall effect is discussed in addition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Singular value decomposition of adjoint flux distributions for Monte Carlo variance reduction

Monte Carlo (MC) shielding calculations often use weight windows (WWs) and biased sources formed from a deterministic estimate of the adjoint flux to improve the convergence rate of tallies. This requires a significant amount of computer memory, which can limit the memory available for high-resolution tally output. A new method is proposed for reducing these memory requirements by using singular value decomposition (SVD) in linear or logarithmic space to approximate the adjoint flux. This method’s performance is evaluated using the Shift and Denovo codes for streaming and diffusion base case problems, followed by problems using the Westinghouse AP1000 and the Joint European Torus. The log SVD reduced WW memory requirements by an order of magnitude in all cases without a significant performance penalty. Additionally, the linear SVD reduced biased source memory requirements by an order of magnitude, but further investigation is needed to account for observed limitations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transient Evolution of Nonmetallic Inclusions During Calcium Treatment of Molten Steel

The transient evolution of nonmetallic inclusions after calcium addition in pipeline steels was investigated with a vacuum induction furnace. Samples were taken at 1, 5, 10, 15, and 20 minutes after calcium treatment in both MgO and Al{sub 2}O{sub 3} crucibles. It was found that the total oxygen and the number density of inclusions were increased during calcium modification, while they were dropped to a low level in the last tapped sample. Due to the evaporation of calcium, inclusions were transferred from CaO-CaS to Al{sub 2}O{sub 3}-CaO-CaS, and then to Al{sub 2}O{sub 3}-CaO. The decomposition of CaS was highly dependent on the decrease of the total calcium and the increase of the total oxygen in the steel. Thermodynamic calculation was performed to predict the composition of inclusions considering the effect of the total oxygen and the total calcium and was validated by measurement. The relationship between the content of Al{sub 2}O{sub 3} in inclusions and the ratio of the total calcium and the total oxygen in steels was measured and compared with the calculated one using thermodynamic software Factsage 7.0. The mass-transfer coefficient of the dissolved calcium in the steel was estimated in the range of 2.35 × 10{sup −4} to 3.53 × 10{sup −4} m/s.

36 MATERIALS SCIENCE↗