Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compressibility effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Study of the interplay between lower-order and higher-order energetic strain-gradient effects in polycrystal plasticity

in this report strain-gradient (SG) plasticity refers to a class of non-local theories in which gradients of plastic slip determine the storage of geometrically necessary dislocations, introducing a length-scale dependence in the mechanical behavior of crystalline materials, which is otherwise lacking in local theories. In this work, we incorporate lower-order (LO) and higher-order energetic (HOE) strain-gradient effects into a crystal plasticity fast Fourier transform (FFT)-based formulation to investigate the interplay of the length scale that each strain-gradient term introduces at the microscale, and the mechanical properties that result at the macroscale. For an applicable range of length scales, we consider two systems: a 1-D two-phase face centered cubic (FCC) laminate and a 3-D FCC polycrystal, and two uniaxial deformation modes: monotonic tension and cyclic tension–compression. We show that increases in the individual LO and HOE length scales increase the hardening rate and strength of the material, respectively. When combined, the strong LO hardening is less pronounced than the effect alone due to the lowering of the gradients due to the HOE microstress. We demonstrate that the LO and HOE hardening manifest as “isotropic” (yield surface expansion) and “kinematic” (yield surface shift) effects, respectively, consistent with their theoretical origins. We show that in cyclic loading, the Bauschinger effect emerges in both local and non-local calculations and link its origins and severity to the behavior in the strain field, slip-system rates, and the HOE microforce.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of reversible dislocation-based deformation on nanoparticle strain at failure

Molecular dynamics simulations are used to isolate and quantify the reversible and irreversible mechanisms that contribute to deformation in platinum nanoparticles under compression. Quantitative analysis reveals how the nucleation and entanglement of dislocations can lead to reversible dislocation-based deformation. Simulations run at different temperatures and loading conditions show that the formation of entangled dislocations is more likely at higher temperatures and is facilitated by loading orientations where dislocations nucleate on intersecting slip planes. The presence of entangled dislocations increases the strain at failure due to the ability of those dislocations to accommodate strain reversibly. The results are corroborated by the observation of similar entangled dislocation loops during in situ compression experiments on nanoparticles of the same material. Altogether, these findings provide insight into the role of dislocations in both reversible and irreversible deformation and their implications for nanoparticle stability and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A high-strength precipitation hardened cobalt-free high-entropy alloy

Recent studies on precipitation-hardened high-entropy alloys (HEAs) demonstrate their high strength and thermal stability, making them promising materials for high-temperature structural applications such as nuclear reactors. However, many existing HEAs contain cobalt (Co), which is unsuitable for nuclear applications because of the long-term activation issue of Co. Co is also expensive and considered a critical material for other applications. Therefore, it is desired to exclude Co from the composition. A Co-free (Fe 0.3 Ni 0.3 Mn 0.3 Cr 0.1 ) 88 Ti 4 Al 8 HEA was developed and studied in this work. In contrast to previous Co-free HEAs, this alloy is close to equiatomic in its composition and promises a more pronounced high-entropy effect. Scanning electron microscopy, transmission electron microscopy, atom probe tomography, and synchrotron-based, high-energy X-ray diffraction were used to characterize this alloy and revealed a complex four-phase structure, with an FCC matrix, γ’ precipitates, and a network of B2 and χ phase particles. This structure granted 2151 MPa compressive strength and good thermal stability, but with limited ductility and slow precipitation kinetics. A strengthening analysis of the alloy shows that the B2 and χ provided the most significant strengthening contribution, adding 312 MPa and 788 MPa respectively. Furthermore the strengthening effect from the nanoscale γ' is also considerable, adding 608 MPa in total. This study lays the foundation for the continued development of high-strength Co-free HEAs with improved and satisfactory ductility.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydrogel-assisted self-healing of biomineralized living building materials

Living building materials (LBMs) are an emergent class of structural materials that leverage the biomineralization capability of microorganisms within sand-hydrogel scaffolds to produce living, load-bearing structures. Here we produced LBMs using a physically crosslinkable sand-hydrogel scaffold and two microorganisms with different biomineralization pathways - Synechococcus sp. PCC 7002 (photosynthetic) and S. pasteurii (ureolytic) - and investigated their self-healing capacity. Our results reveal that both Synechococcus sp. PCC 7002 and S. pasteurii demonstrated exceptional viability within all LBMs for more than 20 days. Damaged LBMs containing Synechococcus sp. PCC 7002 exhibited 103% and 112% of their original compressive and flexural strengths, respectively, after three days of healing at 50% relative humidity (RH) (i.e., ambient conditions). In contrast, LBMs containing S. pasteurii exhibited 71% and 66% of their original compressive and flexural strengths, respectively, after three days of healing at 50% RH. The compressive and flexural strengths of all LBMs rebounded to 93-100% after seven days of healing at 50% RH. Data substantiate that the self-healing ability of the hydrogel plays a critical role in facilitating healing of LBMs, as evidenced by the 82-118% rebounds in compressive and flexural strengths by the sand-hydrogel scaffold alone after three or seven days of healing at 50% RH. Healing was less effective at 100% RH for all LBMs investigated herein.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Higher harmonics in planar Hall effect induced by cluster magnetic multipoles

Antiferromagnetic (AFM) materials are attracting tremendous attention due to their spintronic applications and associated novel topological phenomena. However, detecting and identifying the spin configurations in AFM materials are quite challenging due to the absence of net magnetization. Herein, we report the practicality of utilizing the planar Hall effect (PHE) to detect and distinguish “cluster magnetic multipoles” in AFM Nd 2 Ir 2 O 7 (NIO-227) fully strained films. By imposing compressive strain on the spin structure of NIO-227, we artificially induced cluster magnetic multipoles, namely dipoles and A 2 - and T 1 -octupoles. Importantly, under magnetic field rotation, each magnetic multipole exhibits distinctive harmonics of the PHE oscillation. Moreover, the planar Hall conductivity has a nonlinear magnetic field dependence, which can be attributed to the magnetic response of the cluster magnetic octupoles. Our work provides a strategy for identifying cluster magnetic multipoles in AFM systems and would promote octupole-based AFM spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Predicting metal–metal interactions. I. The influence of strain on nanoparticle and metal adlayer stabilities

Strain-engineering of bimetallic nanomaterials is an important design strategy for developing new catalysts. In this paper, we introduce an approach for including strain effects into a recently introduced, density functional theory (DFT)-based alloy stability model. The model predicts adsorption site stabilities in nanoparticles and connects these site stabilities with catalytic reactivity and selectivity. Strain-based dependencies will increase the model’s accuracy for nanoparticles affected by finite-size effects. In addition to the stability of small nanoparticles, strain also influences the heat of adsorption of epitaxially grown metal-on-metal adlayers. In this respect, we successfully benchmark the strain-including alloy stability model with previous experimentally determined trends in the heats of adsorption of Au and Cu adlayers on Pt (111). For these systems, our model predicts stronger bimetallic interactions in the first monolayer than monometallic interactions in the second monolayer. We explicitly quantify the interplay between destabilizing strain effects and the energy gained by forming new metal–metal bonds. While tensile strain in the first Cu monolayer significantly destabilizes the adsorption strength, compressive strain in the first Au monolayer has a minimal impact on the heat of adsorption. Hence, this study introduces and, by comparison with previous experiments, validates an efficient DFT-based approach for strain-engineering the stability, and, in turn, the catalytic performance, of active sites in bimetallic alloys with atomic level resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Static and shock compression studies of eutectic high-entropy alloy AlCoCrFeNi 2.1 to ultrahigh pressures

The high-entropy alloy with composition AlCoCrFeNi 2.1 , additively manufactured with the laser powder-bed fusion technique, has a far-from-equilibrium BCC/FCC eutectic nanolamellar structure. We studied the high-pressure response of this alloy under both static compression and high-strain rate shock compression. The response to static compression using a diamond anvil cell was studied at pressures up to 302 GPa with synchrotron x-ray diffraction at the advanced photon source. The high-pressure FCC-only phase of the EHEA previously observed by Pope et al. [AIP Adv. 13, 035124 (2023)] is found to be stable up to the highest pressure achieved in this study with a volume compression of V/V 0 = 0.587 at ambient temperature. The shock experiments were performed by using GEKKO XII lasers at the Institute of Laser Engineering, Osaka University. The principal Hugoniot equation-of-state of the EHEA was measured up to a pressure of 515 GPa and a compression of V/V 0 = 0.613. Additionally, the thermal equation of state of the EHEA was measured up to 6.2 GPa and 1623 K using a large-volume Paris–Edinburgh cell to obtain the temperature dependence of bulk modulus and thermal expansion coefficients. The melting temperature for EHEA AlCoCrFeNi 2.1 at a pressure of 5.6 GPa was measured to be 1648 ± 25 K. These results can be used to refine stochastic (or special) quasi-random structure (SQS) models for high-pressure high-temperature behavior of high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dependence of thick filament structure in relaxed mammalian skeletal muscle on temperature and interfilament spacing

Contraction of skeletal muscle is regulated by structural changes in both actin-containing thin filaments and myosin-containing thick filaments, but myosin-based regulation is unlikely to be preserved after thick filament isolation, and its structural basis remains poorly characterized. Here, we describe the periodic features of the thick filament structure in situ by high-resolution small-angle x-ray diffraction and interference. We used both relaxed demembranated fibers and resting intact muscle preparations to assess whether thick filament regulation is preserved in demembranated fibers, which have been widely used for previous studies. We show that the thick filaments in both preparations exhibit two closely spaced axial periodicities, 43.1 nm and 45.5 nm, at near-physiological temperature. The shorter periodicity matches that of the myosin helix, and x-ray interference between the two arrays of myosin in the bipolar filament shows that all zones of the filament follow this periodicity. The 45.5-nm repeat has no helical component and originates from myosin layers closer to the filament midpoint associated with the titin super-repeat in that region. Cooling relaxed or resting muscle, which partially mimics the effects of calcium activation on thick filament structure, disrupts the helical order of the myosin motors, and they move out from the filament backbone. Compression of the filament lattice of demembranated fibers by 5% Dextran, which restores interfilament spacing to that in intact muscle, stabilizes the higher-temperature structure. The axial periodicity of the filament backbone increases on cooling, but in lattice-compressed fibers the periodicity of the myosin heads does not follow the extension of the backbone. Thick filament structure in lattice-compressed demembranated fibers at near-physiological temperature is similar to that in intact resting muscle, suggesting that the native structure of the thick filament is largely preserved after demembranation in these conditions, although not in the conditions used for most previous studies with this preparation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Ferroelectricity and superconductivity in strained Eu x Sr 1 – x TiO 3 films

The superconducting transition of SrTiO 3 can be influenced by tuning its ferroelectric transition, but the underlying reasons remain poorly understood. Here, we investigate compressively strained, Sm-doped films of Eu x Sr 1-x TiO 3 that were grown by molecular beam epitaxy to determine the effect of alloying with Eu on both superconductivity and ferroelectricity, both of which are present in strained SrTiO 3 films. Remarkably, superconductivity survives up to x = 0.14. Films at the lowest alloy concentration studied here, x = 0.09, exhibit no suppression of their superconducting transition temperature, but a strong reduction of the upper critical field (H c2 ), compared to non-alloyed, strained SrTiO 3 films. In addition, these films lack the sharp ferroelectric transition that appears in films without Eu in second harmonic generation measurements. Here, we postulate that Eu-alloying causes a crossover from a globally ordered ferroelectric state to one with only short-range polar order. We discuss the connection between the loss of global polar order and the change in the superconducting properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Tuning the structure and superconductivity of SrNi 2⁢ P 2 by Rh substitution

The compound SrNi 2⁢ P 2 is unique among the ThCr 2 ⁢Si 2 class since it exhibits a temperature-induced transition upon cooling from an uncollapsed tetragonal (ucT) state to a one-third-collapsed orthorhombic (tcO) state where one out of every three P-rows bond across the Sr layers. This compound is also known for exhibiting bulk superconductivity below 1.4 K at ambient pressure. Here, in this paper, we report on the effects of Rh substitution in Sr⁢(Ni 1-x ⁢Rh x ) 2 ⁢P 2 on the structural and superconducting properties. We studied the variation of the nearest P-P distances as a function of the Rh fraction at room temperature, as well as its temperature dependence for selected compositions. We find that increasing the Rh fraction leads to a decrease in the transition temperature between the ucT and tcO states, until a full suppression of the tcO state for x ≥ 0.166. The superconducting transition first remains nearly insensitive to the Rh fraction, and then it increases to 2.3 K after the tcO state is fully suppressed. These results are summarized in a phase diagram, built upon the characterization by energy dispersive x-ray spectroscopy, x-ray diffraction, resistance, magnetization, and specific heat measurements done on crystalline samples with varying Rh content. The relationship between band structure, crystal structure, and superconductivity is discussed based on previously reported band structure calculations on SrRh 2 ⁢P 2 . Moreover, the effect of Rh fraction on the stress-induced structural transitions is also addressed by means of strain-stress studies done by uniaxial compression of single-crystalline micropillars of Sr⁢(Ni 1-x ⁢Rh x ) 2 ⁢P 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Development and Characterization of a Sustainable Bio-Polymer Concrete with a Low Carbon Footprint

Polymer concrete (PC) has been used to replace cement concrete when harsh service conditions exist. Polymers have a high carbon footprint when considering their life cycle analysis, and with increased climate change concerns and the need to reduce greenhouse gas emission, bio-based polymers could be used as a sustainable alternative binder to produce PC. This paper examines the development and characterization of a novel bio-polymer concrete (BPC) using bio-based polyurethane used as the binder in lieu of cement, modified with benzoic acid and carboxyl-functionalized multi-walled carbon nanotubes (MWCNTs). The mechanical performance, durability, microstructure, and chemical properties of BPC are investigated. Moreover, the effect of the addition of benzoic acid and MWCNTs on the properties of BPC is studied. The new BPC shows relatively low density, appreciable compressive strength between 20–30 MPa, good tensile strength of 4 MPa, and excellent durability resistance against aggressive environments. The new BPC has a low carbon footprint, 50% lower than ordinary Portland cement concrete, and can provide a sustainable concrete alternative in infrastructural applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanisms of Mitigating Chloride-Induced Stress Corrosion Cracking of Austenitic Steels by Laser Shock Peening

This study investigates the effect of laser shock peening (LSP) on the chloride-induced stress corrosion cracking (SCC) of 304 austenitic steels. LSP can induce a high compressive residual stress to a depth of 700 µm and plastic deformation structures of dislocations, deformation twins, and stacking faults. Constant-load SCC tests in MgCl2 solution suggested that LSP can retard the crack initiation and slow the crack growth. LSP-treated subsurface layers experience ductile fracture while the central regions exhibit intergranular SCC. The LSP-induced deformation structures may impede dislocation slips, while the LSP-induced compressive residual stress can lessen the stress intensity factor of crack tips and decrease the local stress for film rupture.

Materials Science↗
DOE OSTI2020

Quantum Monte Carlo determination of the principal Hugoniot of deuterium

Here, we present coupled electron-ion Monte Carlo results for the principal Hugoniot of deuterium together with an accurate study of the initial reference state of shock-wave experiments. We discuss the influence of nuclear quantum effects, thermal electronic excitations, and the convergence of the potential energy surface by wave-function optimization within variational Monte Carlo and projection quantum Monte Carlo methods. Compared to a previous study, our calculations also include low pressure-temperature (P,T) conditions resulting in close agreement with experimental data, while our revised results at higher (P,T) conditions still predict a more compressible Hugoniot than experimentally observed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shock compression of molybdenum single crystals to 110 GPa: Elastic–plastic deformation and crystal anisotropy

To explore the role of crystal anisotropy on the elastic-plastic deformation of BCC single crystals at high shock stresses, molybdenum (Mo) single crystals were shock compressed along [100], [111], and [110] orientations at elastic impact stresses between 20 and 110 GPa. Laser interferometry was used to measure shock wave velocities and particle velocity histories. Along the [100] and [111] orientations, elastic-plastic waves (two wave structure) were observed up to 110 GPa. Along the [110] orientation, the two wave structure was observed only up to 90 GPa. The measured elastic wave amplitudes were analyzed to determine crystal anisotropy effects, impact stress dependence, and the activated slip systems on the Hugoniot elastic limit. The results from our work have provided insight into the role of crystal anisotropy on the elastic-plastic deformation under shock compression at high stresses.

42 ENGINEERING↗
DOE OSTI2022

Compression Analysis of Materials via in situ X-ray Computed Tomography

X-ray computed tomography (X-ray CT) is an analytical technique used in materials science to non– destructively characterize features in a variety of materials like polymers, metals, composites, and explosives. The non-destructive imaging allows for the analysis of features (voids and cracks), which give a fundamental understanding of material characteristics.This is more effective when combinedwith a load cell to expose the material to realworld stimuli to understand material characteristics and morphological behavior in situ. This study focused on using in situ X-ray CT to understand the material characteristics and morphological changes of sugar prills and a lattice under a compressive load. Sugar prills are used as a surrogate to analyze explosives in a safer and less expensiveway. The sugar prills were found to be brittle and shattered when compressed via the CT renderings and the stress/strain information. The lattices are used as both the basis and ground truth comparison for the development of models to predict the morphological and material characteristic changes that occur as a result of loading. The lattice was found to have weak regions due to low polymer interlayer fusion in these regions during the printing process. It was also found that under the initial compression the lattice demonstrated elastic behavior as its cellular structure was intact until the cellular structure started to collapse causing yielding in the lattice. Additionally, the analysis of the sugar prills and lattice demonstrate the information that can be gleaned from in situ X-ray CT experiments that would be lost in traditional pre- and post-mortem X-rayCT analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Estimation of constituent properties of concrete materials with an artificial neural network based method

Multi-scale models are developed for heterogeneous concrete materials to estimate their macroscopic mechanical properties in terms of micro-structural data. One crucial challenge of those models is the identification of local properties of constituent phases. In this paper, we present an efficient method based on Artificial Neural Networks (ANN). Typical concrete materials are taken as example. A macroscopic analytical strength criterion is established from three steps of nonlinear homogenization procedure. The macroscopic strength of materials is determined as a function of the frictional coefficient and cohesion of solid cement particles at nanometer scale, intra-particle pores, inter-particle pores and aggregates (inclusions). The objective is to identify the nanoscopic frictional coefficient and cohesion of cement particle from measured macroscopic values of uniaxial compression and tensile strengths. For this purpose, a numerical method based on the ANN is developed. With the analytical macroscopic strength criterion, sensitivity studies are first realized to identify the most important micro-structural parameters influencing the macroscopic strength of concrete. A simplified analytical macroscopic strength criterion is then proposed. A large dataset is further constructed through the inversion of the analytical strength criterion by using the aggregates volume fraction, porosity, macroscopic uniaxial tensile and compressive strengths as input variables and the frictional coefficient and cohesion of cement particles as output unknowns. An ANN model containing four hidden layers and 100 neurons in each layer is constructed and trained by using this dataset. Various types of validation of the ANN model are performed. It is found that the proposed ANN based model can effectively predict the frictional coefficient and cohesion of porous cement paste at the microscopic scale with a very good accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal Stability and Lattice Strain Evolution of High-Nb-Containing TiAl Alloy under Low-Cycle-Fatigue Loading

The micromechanical behavior and the effect of temperature on the micromechanical mechanism of high-Nb-containing TiAl alloy during low-cycle fatigue still remain uncertain. Herein, in situ and ex situ synchrotron-based high-energy X-ray (HEXRD) experiment results reveal that the gamma and omega(o) phases suffer compressive lattice strains but the lattice strain in the alpha(2) phase evolves from tensile to compressive during low-cycle fatigue at 900 degrees C. In addition, the three phases suffer compressive lattice strains during cooling to room temperature, which could result in larger compressive lattice strains in gamma and omega(o) phases and the change of the lattice strain state in the alpha(2) phase. The peak-broadening results show gamma recrystallization is dominant in the interrupted low-cycle-fatigue samples, whereas inhomogeneous deformation occurs in the failed low-cycle-fatigue samples. The performed synchrotron diffraction experiments offer a deeper insight into the phase transformations and micromechanism of TiAl alloy during low-cycle fatigue.

cyclic stress-strain behavior↗
DOE OSTI2026

Powers of magnetic graph matrix: Fourier spectrum, walk compression, and applications

Magnetic graphs, originally developed to model quantum systems under magnetic fields, have recently emerged as a powerful framework for analyzing complex directed networks. Existing research has primarily used the spectral properties of the magnetic graph matrix to study global and stationary network features. However, their capacity to model local, nonequilibrium behaviors, often described by matrix powers, remains largely unexplored. We present a combinatorial interpretation of the magnetic graph matrix powers through directed walk profiles—counts of graph walks indexed by the number of edge reversals. Crucially, we establish that walk profiles correspond to a Fourier transform of magnetic matrix powers. The connection allows exact reconstruction of walk profiles from magnetic matrix powers at multiple discrete potentials, and more importantly, an even smaller number of potentials often suffices for accurate approximate reconstruction in real networks. This shows the empirical compressibility of the information captured by the magnetic matrix. This fresh perspective suggests further applications; for example, we illustrate how powers of the magnetic matrix can identify frustrated directed cycles (e.g., feedforward loops) and can be effectively employed for link prediction by encoding local structural details in directed graphs.

complex networks↗