SEARCH · Search NASA

Results for “Computer implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Implementation of a trapezoidal ring element in NASTRAN for elastic-plastic analysis

The explicit expressions for an elastic-plastic trapezoidal ring element are presented and implemented in NASTRAN computer program. The material is assumed to obey the von Mises' yield criterion, isotropic hardening rule and the Prandtl-Reuss flow relations. For the purpose of demonstration, two elastic-plastic problems are solved and compared with previous results. The first is a plane-strain tube under uniform internal pressure and the second, a finite-length tube loaded over part of its inner surface. A very good agreement was found in both test problems.

Chen, P. C. T.↗

NASA NTRS1980

Elastic-plastic analysis using a triangular ring element in NASTRAN

An elastic plastic triangular ring element is implemented in NASTRAN computer program. The plane strain problem of partially plastic thick walled cylinder under internal pressure is solved and compared with the earlier finite difference solution. A very good agreement has been reached. In order to demonstrate its application to more general problems, an overloaded thread problem for the British Standard Buttress is examined. The maximum axial and principal stresses are located and their values are determined as functions of loadings.

Chen, P. C. T.↗

NASA NTRS1980

Formulation and implementation of a practical algorithm for parameter estimation with process and measurement noise

A new formulation is proposed for the problem of parameter estimation of dynamic systems with both process and measurement noise. The formulation gives estimates that are maximum likelihood asymptotically in time. The means used to overcome the difficulties encountered by previous formulations are discussed. It is then shown how the proposed formulation can be efficiently implemented in a computer program. A computer program using the proposed formulation is available in a form suitable for routine application. Examples with simulated and real data are given to illustrate that the program works well.

Maine, R. E.↗

NASA NTRS1980

Coal gasification systems engineering and analysis, volume 2

The major design related features of each generic plant system were characterized in a catalog. Based on the catalog and requirements data, approximately 17 designs and cost estimates were developed for MBG and alternate products. A series of generic trade studies was conducted to support all of the design studies. A set of cost and programmatic analyses were conducted to supplement the designs. The cost methodology employed for the design and sensitivity studies was documented and implemented in a computer program. Plant design and construction schedules were developed for the K-T, Texaco, and B&W MBG plant designs. A generic work breakdown structure was prepared, based on the K-T design, to coincide with TVA's planned management approach. An extensive set of cost sensitivity analyses was completed for K-T, Texaco, and B&W design. Product price competitiveness was evaluated for MBG and the alternate products. A draft management policy and procedures manual was evaluated. A supporting technology development plan was developed to address high technology risk issues. The issues were identified and ranked in terms of importance and tractability, and a plan developed for obtaining data or developing technology required to mitigate the risk.

Source record↗

NASA NTRS1981

A general algorithm for the construction of contour plots

An algorithm is described that performs the task of drawing equal level contours on a plane, which requires interpolation in two dimensions based on data prescribed at points distributed irregularly over the plane. The approach is described in detail. The computer program that implements the algorithm is documented and listed.

Johnson, W.↗

NASA NTRS1982

Implementation of a C-1 triangular element based on the P-version of the finite element method

The implementation of a computer code CONE (for C(1) continuity) based on the p-version of the finite element method is described. A hierarchic family of triangular finite elements of degree p 5 is used. This family enforces C(1)-continuity across interelement boundaries, and the code is applicable to fourth order partial differential equations in two independent variables, in particular to the biharmonic equation. Applications to several benchmark problems in plate bending are presented. Sample results are examined and compared with theoretical predictions. In particular the analysis of the bending of a rhombic plate shows a significant improvement over othr published results.

Wang, D. W.↗

NASA NTRS1981

A procedure for estimating the information content of SBUV ozone profiles

A description is presented of a new procedure for determining ozone mixing ratios in the upper stratosphere from satellite observations of backscattered ultraviolet (SBUV) radiance. The employed approach is based on a SBUV inversion procedure. The inversion algorithm can best be described as a series of sequentially performed operations, taking into account the determination of a first guess profile, the representation of the ozone profile by a polynomial, the extension of the profile outside the measurement region, error assessment, the optimal ozone profile, and the utilization of iteration. It is found that the described ozone profiling algorithm can be implemented with sufficient computational speed to be used operationally for the inversion of SBUV data.

Cunnold, D. M.↗

NASA NTRS1982

The computation of Laplacian smoothing splines with examples

Laplacian smoothing splines (LSS) are presented as generalizations of graduation, cubic and thin plate splines. The method of generalized cross validation (GCV) to choose the smoothing parameter is described. The GCV is used in the algorithm for the computation of LSS's. An outline of a computer program which implements this algorithm is presented along with a description of the use of the program. Examples in one, two and three dimensions demonstrate how to obtain estimates of function values with confidence intervals and estimates of first and second derivatives. Probability plots are used as a diagnostic tool to check for model inadequacy.

Wendelberger, J. G.↗

NASA NTRS1980

Implementing an integrated engineering data base system: A developer's experience and the application to IPAD

The software developed by the IPAD project, a new and very powerful tool for the implementation of integrated Computer Aided Design (CAD) systems in the aerospace engineering community, is discussed. The IPAD software is a tool and, as such, can be well applied or misapplied in any particular environment. The many benefits of an integrated CAD system are well documented, but there are few such systems in existence, especially in the mechanical engineering disciplines, and therefore little available experience to guide the implementor.

Bruce, E. A.↗

NASA NTRS1983

Phase Calibration for the Block 1 VLBI System

Very Long Baseline Interferometry (VLBI) in the DSN provides support for spacecraft navigation, Earth orientation measurements, and synchronization of network time and frequency standards. An improved method for calibrating instrumental phase shifts has recently been implemented as a computer program in the Block 1 system. The new calibration program, called PRECAL, performs calibrations over intervals as small as 0.4 seconds and greatly reduces the amount of computer processing required to perform phase calibration.

Roth, M. G.↗

NASA NTRS1983

The prediction of the noise of supersonic propellers in time domain - New theoretical results

In this paper, a new formula for the prediction of the noise of supersonic propellers is derived in the time domain which is superior to the previous formulations in several respects. The governing equation is based on the Ffowcs Williams-Hawkings (FW-H) equation with the thickness source term replaced by an equivalent loading source term derived by Isom (1975). Using some results of generalized function theory and simple four-dimensional space-time geometry, the formal solution of the governing equation is manipulated to a form requiring only the knowledge of blade surface pressure data and geometry. The final form of the main result of this paper consists of some surface and line integrals. The surface integrals depend on the surface pressure, time rate of change of surface pressure, and surface pressure gradient. These integrals also involve blade surface curvatures. The line integrals which depend on local surface pressure are along the trailing edge, the shock traces on the blade, and the perimeter of the airfoil section at the inner radius of the blade. The new formulation is for the full blade surface and does not involve any numerical observer time differentiation. The method of implementation on a computer for numerical work is also discussed.

Farassat, F.↗

NASA NTRS1983

QUEST - A Bayesian adaptive psychometric method

An adaptive psychometric procedure that places each trial at the current most probable Bayesian estimate of threshold is described. The procedure takes advantage of the common finding that the human psychometric function is invariant in form when expressed as a function of log intensity. The procedure is simple, fast, and efficient, and may be easily implemented on any computer.

Watson, A. B.↗

NASA NTRS1984

Computational aerodynamics and supercomputers

Some of the progress in computational aerodynamics over the last decade is reviewed. The Numerical Aerodynamic Simulation Program objectives, computational goals, and implementation plans are described.

Ballhaus, W. F., Jr.↗

NASA NTRS1984

Theoretical and experimental engine-inlet flow fields for fighter forebodies

The capability of two numerical methods, one for transonic and one for supersonic flows, to predict the flow fields about representative fighter aircraft forebodies in the vicinity of the engine inlets was examined. The Mach number range covered was 0.9 to 2.5 and the angle-of-attack range was 0 deg to 25 deg. The computer progams that implement each of the numerical methods are described as to their features and usage, and results are compared with comprehensive wind tunnel data. Although both prediction methods were inviscid, results show that the aerodynamic effects of the forebody, with and without a wing, can be simulated fairly well. Futher work is needed to include the effects of viscosity, including vortex shedding.

Yaros, S. F.↗

NASA NTRS1984

TWINTN4: A program for transonic four-wall interference assessment in two-dimensional wind tunnels

A method for assessing the wall interference in transonic two-dimensional wind tunnel tests including the effects of the tunnel sidewall boundary layer was developed and implemented in a computer program named TWINTN4. The method involves three successive solutions of the transonic small disturbance potential equation to define the wind tunnel flow, the equivalent free air flow around the model, and the perturbation attributable to the model. Required input includes pressure distributions on the model and along the top and bottom tunnel walls which are used as boundary conditions for the wind tunnel flow. The wall-induced perturbation field is determined as the difference between the perturbation in the tunnel flow solution and the perturbation attributable to the model. The methodology used in the program is described and detailed descriptions of the computer program input and output are presented. Input and output for a sample case are given.

Kemp, W. B., Jr.↗

NASA NTRS1984

Feedback laws for fuel minimization for transport aircraft

The Theoretical Mechanics Branch has as one of its long-range goals to work toward solving real-time trajectory optimization problems on board an aircraft. This is a generic problem that has application to all aspects of aviation from general aviation through commercial to military. Overall interest is in the generic problem, but specific problems to achieve concrete results are examined. The problem is to develop control laws that generate approximately optimal trajectories with respect to some criteria such as minimum time, minimum fuel, or some combination of the two. These laws must be simple enough to be implemented on a computer that is flown on board an aircraft, which implies a major simplification from the two point boundary value problem generated by a standard trajectory optimization problem. In addition, the control laws allow for changes in end conditions during the flight, and changes in weather along a planned flight path. Therefore, a feedback control law that generates commands based on the current state rather than a precomputed open-loop control law is desired. This requirement, along with the need for order reduction, argues for the application of singular perturbation techniques.

Price, D. B.↗

NASA NTRS1984

Improvements in the accuracy and stability of algorithms for the small-disturbance and full-potential equations applied to transonic flows

Numerical techniques that improve the accuracy and stability of algorithms for the small disturbance and full potential equations used to calculate transonic flows are described. For the small disturbance equation, the algorithm improvements are: (1) the use of monotone switches in the type dependent finite differencing, and (2) the use of stable and simple second order accurate spatial differencing; these improvements are for steady and unsteady transonic flows. For the steady full potential equation, the improvement is in the use of a monotone switch in the type dependent finite differencing of an approximate factorization (AF2) algorithm. All these improvements are implemented in present computer codes by making minor coding modifications.

Goorjian, P. M.↗

NASA NTRS1984

Experience with transonic unsteady aerodynamic calculations

Comparisons of calculated and experimental transonic unsteady pressures and airloads for four of the AGARD Two Dimensional Aeroelastic Configurations and for a rectangular supercritical wing are presented. The two dimensional computer code, XTRAN2L, implementing the transonic small perturbation equation was used to obtain results for: (1) pitching oscillations of the NACA 64A010A; NLR 7301 and NACA 0012 airfoils; (2) flap oscillations for the NACA 64A006 and NRL 7301 airfoils; and (3) transient ramping motions for the NACA 0012 airfoils. Results from the three dimensional code XTRAN3S are compared with data from a rectangular supercritical wing oscillating in pitch. These cases illustrate the conditions under which the transonic inviscid small perturbation equation provides reasonable predictions.

Edwards, J. W.↗