Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conversion System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Data from: Ecosystem carbon exchange on conversion of Conservation Reserve Program grasslands to annual and perennial cropping systems

Land use changes into and out of agricultural production may substantially influence ecosystem carbon (C) balance for many years. We examined ecosystem C balances for eight years after the conversion of 22 year-old Conservation Reserve Program (CRP) grasslands and formerly tilled agricultural fields (AGR) to annual (continuous no-till corn) and perennial (switchgrass and restored prairie) cropland. An unconverted CRP field (CRP-Ref) was maintained as a historical reference. Ecosystem C balance was assessed using adjusted net ecosystem carbon exchange (NEEadj) calculated by adding C removed in harvested biomass to NEE measured using eddy covariance method. The cumulative NEEadj of the corn and perennial systems on former CRP fields showed that these systems were a net C source to the atmosphere over the 8-year period while on former AGR fields, the perennial systems were net C sinks and the corn system near-neutral. The CRP-Ref was near neutral until a drought year when it became a net source. The corn system on the CRP field will likely reach a new lower soil C equilibrium at least 14 years after conversion but will never regain the C lost upon conversion under current no-till management with residue partially removed. On the other hand, the perennial systems could fully regain in ~14 years the C lost following conversion. The cumulative NEEadj of the corn systems exhibited a higher C emission than did the perennial systems within the same land use histories, reflecting the dominant role of crop type and management in agricultural ecosystem C balance. Results suggest that converting croplands to grasslands results in immediate C gains whereas converting grasslands to croplands results in permanent (no-till corn with partial residue removal) or temporary (perennial herbaceous crops) net C loss to the atmosphere. This has a significant implications for global climate change mitigation where biomass production from annual and perennial crops is promoted to avoid fossil-fuel C emissions (biofuel) or to remove CO2 from the atmosphere (bioenergy C capture and storage).

54 ENVIRONMENTAL SCIENCES↗

Unlocking the distinctive enzymatic functions of the early plant biomass deconstructive genes in a brown rot fungus by cell-free protein expression

ABSTRACT Saprotrophic fungi that cause brown rot of woody biomass evolved a distinctive mechanism that relies on reactive oxygen species (ROS) to kick-start lignocellulosic polymers’ deconstruction. These ROS agents are generated at incipient decay stages through a series of redox relays that shuttle electrons from fungus’s central metabolism to extracellular Fenton chemistry. A list of genes has been suggested encoding the enzyme catalysts of the redox processes involved in ROS’s function. However, navigating the functions of the encoded enzymes has been challenging due to the lack of a rapid method for protein synthesis. Here, we employed cell-free expression system to synthesize four redox or degradative enzymes, which were identified, by transcriptomic data, as conserved players of the ROS oxidation phase across brown rot fungal species. All four enzymes were successfully expressed and showed activities that enable confident assignment of function, namely, benzoquinone reductase (BQR), ferric reductase, α-L-arabinofuranosidase (ABF), and heme-thiolate peroxidase (HTP). Detailed analysis of their catalytic features within the context of brown rot environments allowed us to interpret their roles during ROS-driven wood decomposition. Specifically, we validated the functions of BQR as the driver redox enzyme of Fenton cycles and reconstructed its interactions with the co-occurring HTP or laccase and ABF. Taken together, this research demonstrated that the cell-free expression platform is adequate for synthesizing functional fungal enzymes and provided an alternative route for the rapid characterization of fungal proteins, escalating our understanding of the distinctive biocatalyst system for plant biomass conversion. IMPORTANCE Brown rot fungi are efficient wood decomposers in nature, and their unique degradative systems harbor untapped catalysts pursued by the biorefinery and bioremediation industries. While the use of “omics” platforms has recently uncovered the key “oxidative-hydrolytic” mechanisms that allow these fungi to attack lignocellulose, individual protein characterization is lagging behind due to the lack of a robust method for rapid synthesis of crucial fungal enzymes. This work delves into the studies of biochemical functions of brown rot enzymes using a rapid, cell-free expression platform, which allowed the successful depictions of enzymes’ catalytic features, their interactions with Fenton chemistry, and their roles played during the incipient stage of brown rot when fungus sets off the reactive oxygen species for oxidative degradation. We expect this research could illuminate cell-free protein expression system’s use to fulfill the increasing need for functional studies of fungal enzymes, advancing the discoveries of novel biomass-converting catalysts.

60 APPLIED LIFE SCIENCES↗

Conversion of the LLNL/CAMS 1 MV biomedical AMS system to a semi-automated natural abundance 14C spectrometer: system optimization and performance evaluation

The Lawrence Livermore National Laboratory – Center for Accelerator Mass Spectrometry compact 1 MV biomedical accelerator mass spectrometer was repurposed and optimized for the semi-automated radiocarbon measurement of natural abundance environmental samples. Here we present results from 15 months of routine system operation and evaluate the system performance based on 30 sample wheels measured with consistent operating conditions over 7 months from August 2019 to March 2020. Additionally, the average measurement precision was 2.7 ± 0.7‰. System accuracy was assessed with measurements of 14 C-free materials, standard materials with 14 C-content spanning 0.5 to 1.5 F 14 C, and by comparison to split samples measured with the 10 MV AMS system. Overall, this system can routinely measure samples as small as 300 µgC and less than 33000 years without the need for size-specific correction protocols.

43 PARTICLE ACCELERATORS↗

Development of Integrated Online Monitoring Systems for Detection of Diversion at Natural Uranium Conversion Facilities

Recent work at Oak Ridge National Laboratory (ORNL) has focused on some source term modeling of uranyl nitrate (UN) as part of a comprehensive validation effort employing gamma-ray detector instrumentation for the detection of diversion from declared conversion activities. Conversion, the process by which natural uranium ore (yellowcake) is purified and converted through a series of chemical processes into uranium hexafluoride gas (UF6), has historically been excluded from the nuclear safeguards requirements of the 235U-based nuclear fuel cycle. The undeclared diversion of this product material could potentially provide feedstock for a clandestine weapons program for state or non-state entities. Given the changing global political environment and the increased availability of dual-use nuclear technology, the International Atomic Energy Agency has evolved its policies to emphasize safeguarding this potential feedstock material in response to dynamic and evolving potential diversion pathways. To meet the demand for instrumentation testing at conversion facilities, ORNL developed the Uranyl Nitrate Calibration Loop Equipment (UNCLE) facility to simulate the full-scale operating conditions of a purified uranium-bearing aqueous stream exiting the solvent extraction process in a natural uranium conversion plant. This work investigates gamma-ray signatures of UN circulating in the UNCLE facility and evaluates detector instrumentation sensitivity to UN for safeguards applications. These detector validation activities include assessing detector responses to the UN gamma-ray signatures for spectrometers based on sodium iodide, lanthanum bromide, and germanium detectors. The results of measurements under static and dynamic operating conditions at concentrations ranging from 10-90g U/L of naturally enriched UN will be presented. A range of gamma-ray lines was examined and self-attenuation factors were calculated, in addition to attenuation for transmission measurement of density, concentration and enrichment. A detailed uncertainty analysis will be presented providing insights into instrumentation limitations to spoofing.

Dewji, Shaheen A↗

Strategy and gaps for modeling, simulation, and control of hybrid systems

The purpose of this report is to establish a strategy for modeling and simulation of candidate hybrid energy systems. Modeling and simulation is necessary to design, evaluate, and optimize the system technical and economic performance. Accordingly, this report first establishes the simulation requirements to analysis candidate hybrid systems. Simulation fidelity levels are established based on the temporal scale, real and synthetic data availability or needs, solution accuracy, and output parameters needed to evaluate case-specific figures of merit. Accordingly, the associated computational and co-simulation resources needed are established; including physical models when needed, code assembly and integrated solutions platforms, mathematical solvers, and data processing. This report first attempts to describe the figures of merit, systems requirements, and constraints that are necessary and sufficient to characterize the grid and hybrid systems behavior and market interactions. Loss of Load Probability (LOLP) and effective cost of Effective Cost of Energy (ECE), as opposed to the standard Levelized Cost of Electricty (LCOE), are introduced as technical and economical indices for integrated energy system evaluations. Financial assessment methods are subsequently introduced for evaluation of non-traditional, hybrid energy systems. Algorithms for coupled and iterative evaluation of the technical and economic performance are subsequently discussed. This report further defines modeling objectives, computational tools, solution approaches, and real-time data collection and processing (in some cases using real test units) that will be required to model, co-simulate, and optimize; (a) an energy system components (e.g., power generation unit, chemical process, electricity management unit), (b) system domains (e.g., thermal, electrical or chemical energy generation, conversion, and transport), and (c) systems control modules. Co-simulation of complex, tightly coupled, dynamic energy systems requires multiple simulation tools, potentially developed in several programming languages and resolved on separate time scales. Whereas further investigation and development of hybrid concepts will provide a more complete understanding of the joint computational and physical modeling needs, this report highlights areas in which co-simulation capabilities are warranted. The current development status, quality assurance, availability and maintainability of simulation tools that are currently available for hybrid systems modeling is presented. Existing gaps in the modeling and simulation toolsets and development needs are subsequently discussed. This effort will feed into a broader Roadmap activity for designing, developing, and demonstrating hybrid energy systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decomposing Fuel Economy and Greenhouse Gas Regulatory Standards in the Energy Conversion Efficiency and Tractive Energy Domain

The three foundational elements that determine mobile source energy use and tailpipe carbon dioxide (CO2) emissions are the tractive energy requirements of the vehicle, the on-cycle energy conversion efficiency of the propulsion system, and the energy source. The tractive energy requirements are determined by the vehicle's mass, aerodynamic drag, tire rolling resistance, and parasitic drag. Oncycle energy conversion of the propulsion system is dictated by the tractive efficiency, non-tractive energy use, kinetic energy recovery, and parasitic losses. The energy source determines the mobile source CO2 emissions. For current vehicles, tractive energy requirements and overall energy conversion efficiency are readily available from the decomposition of test data. For future applications, plausible levels of mass reduction, aerodynamic drag improvements, and tire rolling resistance can be transposed into the tractive energy domain. Similarly, by combining thermodynamic, mechanical efficiency, and kinetic energy recovery fundamentals with logical proxies, achievable levels of energy conversion efficiency can be established to allow for the evaluation of future powertrain requirements. Combining the plausible levels of tractive energy and on-cycle efficiency provides a means to compute sustainable vehicle and propulsion system scenarios that can achieve future regulations. Using these principles, the regulations established in the United States (U.S.) for fuel consumption and CO2 emissions are evaluated. Fleet-level scenarios are generated and compared to the technology deployment assumptions made during rule-making. When compared to the rule-making assumptions, the results indicate that a greater level of advanced vehicle and propulsion system technology deployment will be required to achieve the model year 2025 U.S. standards for fuel economy and CO2 emissions.

CAFE↗

Ligand Tuning in Cu(pyalk)2 Water Oxidation Electrocatalysis

Molecular copper water oxidation electrocatalysts have been extensively studied in recent years for their potential use in artificial photosynthetic systems for solar energy conversion. Although ligand modification and its ability to influence catalytic properties is a key advantage of molecular systems, there are, as yet, few examples of systematic studies of these effects. Our oxidatively resistant pyalk (2-pyridyl-2-propanoate) ligand forms a complex with copper(II) that catalyzes water oxidation and provides an attractive scaffold for systematic ligand tuning. Here, we report a series of analogous copper complexes with electron-donating (methoxy-) and -withdrawing (methoxycarbonyl-) groups at the para-position of the pyalk ligand. Trends in the pKa and redox potential align with first-principles predictions for the electron-withdrawing and electron-donating groups. While the modified complexes show good activity for water oxidation, lowered faradaic efficiency in comparison to the parent complex highlights the importance of stability considerations for catalyst tuning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A cell-free system for production of 2,3-butanediol is robust to growth-toxic compounds

The need for sustainable, low-cost production of bioenergy and commodity chemicals is increasing. Unfortunately, the engineering potential of whole-cell catalysts to address this need can be hampered by cellular toxicity. When such bottlenecks limit the commercial feasibility of whole-cell fermentation, cell-free, or in vitro, based approaches may offer an alternative. Here, we assess the impact of three classes of growth toxic compounds on crude extract-based, cell-free chemical conversions. As a model system, we test a metabolic pathway for conversion of glucose to 2,3-butanediol (2,3-BDO) in lysates of Escherichia coli . First, we characterized 2,3-BDO production with different classes of antibiotics and found, as expected, that the system is uninhibited by compounds that prevent cell growth by means of cell wall replication and DNA, RNA, and protein synthesis. Second, we considered the impact of polar solvent addition (e.g., methanol, n-butanol). We observed that volumetric productivities (g/L/h) were slowed with increasing hydrophobicity of added alcohols. Finally, we investigated the effects of using pretreated biomass hydrolysate as a feed stock, observing a 25% reduction in 2,3-BDO production as a result of coumaroyl and feruloyl amides. Overall, we find the cell-free system to be robust to working concentrations of antibiotics and other compounds that are toxic to cell growth, but do not denature or inhibit relevant enzymes.

09 BIOMASS FUELS↗

Seasonal treatment and economic evaluation of an algal wastewater system for energy and nutrient recovery

Algal systems have been proposed for treating wastewater while simultaneously recovering energy and nutrients. In this study, an integrated system with algal treatment of municipal wastewater followed by hydrothermal liquefaction (HTL) conversion and upgrading steps was evaluated. Pilot-scale treatment of primary clarified municipal wastewater effluent was evaluated in different seasons (cold, warm, and a transitional period in between) with different strains of algae selected for each season, and the warm season strain successfully met all local discharge regulations. The collected wastewater algae biomass was subjected to HTL at 300 and 350 °C and both energy and nutrient recoveries were much improved at the higher temperature. The transitional batch was found to have the highest biocrude oil yields, and its co-products had the highest nutrient (nitrogen and phosphorus) contents. Economic analysis of conversion processes informed by the observed HTL product yields was conducted. While this revealed that targeting biofuel products alone was not profitable, adding nutrient co-products (e.g., ammonium sulfate fertilizer), adjusting algae harvesting time, and incorporating component-specific conversion processes could substantially improve system economics. Overall, this study highlights connections between treatment and conversion processes, and demonstrates how these connections can be leveraged for more efficient resource recovery without compromising treatment operations.

09 BIOMASS FUELS↗

Methods for the conversion of fermentable sugars to ethanol

Methods and systems for the enhancement of bioproduct process yields. The present invention provides systems and methods for improvement of the carbon conversion efficiency by yeast of an organic substrate such as a fermentable sugar to a fermentation product such as ethanol. Exemplary yield-increasing/growth-inhibitory compounds include tyrosol (TyrOH), 2-phenylethanol (PheOH), and tryptophol (TrpOH). Immobilization of the yeast, such as in a porous bead or pellet, can further increase yield. Exemplary immobilization included immobilization in calcium alginate beads. The system and methods taught herein demonstrate that product yield such as ethanol yield can be improved by adding yeast yield-increasing/growth-inhibitory molecules to reduce cell growth of yeast species, such as S. cerevisiae , suggesting a strategy to improve the yield of ethanol and other yeast fermentation products by manipulating native biological control systems.

Reardon, Kenneth F.↗

Controllability Study of Propagating Mode Content by an Angle-Adjustable Mirror of a Miter-Bend in EC H&CD Transmission Line

A mode conversion miter bend with an angle controllable mirror was developed. By changing the mirror angle, the RF beam angle in the miter bend is controlled and the transmission mode contents (LP01 and LP11 modes) are controlled. The miter bend was tested using a 170 GHz milliwatt-class low power RF system. The dependence of the ratio of operating LP01 mode and higher order LP11 mode on the miter bend mirror angle was acquired. The concept of mode conversion system was validated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conversion of Coal in a Fluidized Bed Chemical Looping Combustion Reactor with and without Oxygen Uncoupling

Chemical looping combustion (CLC) is a carbon capture technology that involves circulating metal-based oxygen carrier particles between two reactors, where the metal is alternately oxidized by air and then reduced by fuel as the fuel combusts. In the variant of CLC known as chemical looping with oxygen uncoupling (CLOU), the oxygen carrier releases gaseous O 2 in the fuel reactor, allowing for a rapid reaction with solid fuels. This study focuses on improving the understanding of mechanisms responsible for carbon conversion of coal and coal char in a bench-scale fluidized bed reactor using oxygen carriers with and without oxygen uncoupling properties. Effects of coal particle size and temperature on the rate of carbon conversion are evaluated in order to quantify performance and to aid in design and modeling of large-scale fully circulating chemical looping systems. The data confirms that conversion with a copper-based CLOU carrier is faster and results in lower CO and CH 4 concentrations than the natural ore ilmenite, which does not have CLOU properties. Furthermore, with coal as fuel, the increase in the rate of char carbon conversion with CLOU is lower than that previously reported because of competition for oxygen by volatiles. Conversion is also faster with smaller particles but results in higher CO concentrations as small particles gasify and release volatiles more quickly.

01 COAL, LIGNITE, AND PEAT↗

Opportunities and Challenges for Catalysis in Carbon Dioxide Utilization

The environmental and societal consequences of the increasing levels of carbon dioxide in our atmosphere are among the most significant challenges society currently faces. Carbon dioxide utilization, in which carbon dioxide is either used directly or converted into more valuable products, is likely to be one component of a broad strategy to reduce carbon dioxide emissions, a challenge that will require both technological and policy changes. Here, catalysis is crucial to the successful conversion of carbon dioxide into value-added products. Furthermore, we provide a review on chemical and biological systems for carbon dioxide conversion directed toward the readers of ACS Catalysis, which focuses on providing a general perspective on the field, rather than technical details. We discuss both challenges related to the conversion of carbon dioxide into specific products such as carbon monoxide, formic acid, methanol, methane, ethylene, fuels, carboxylic acids, and polymers as well as general challenges for the field. We also compare and contrast different methods for carbon dioxide conversion, for example homogeneous versus heterogeneous catalysis or photosynthetic versus nonphotosynthetic biological conversion, and highlight areas where one approach may have advantages over another. In a concluding section, we identify problems related to carbon dioxide conversion that will need to be addressed for technology to be both viable and reduce carbon dioxide emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Design of Mu2E Spill Regulation System (SRS)

Direct μ→e conversion requires resonant extraction of a stream of pulsed beam, comprised of short micro-bunches (pulses) from the Delivery ring (DR) to the Mu2e target. Experimental needs and radiation protection apply strict re-quirements on the beam quality control and regulation of the spill. The objective of the Spill Regulation System (SRS) is to maintain the intensity uniformity of a stream of ~25k pulses as 1e12 protons are extracted at 590.08 kHz over a 43 ms spill period. To meet the specified perfor-mance, two regulation elements will be driven simultane-ously: a family of three zero-harmonic quadrupoles (tune ramp quads) and a RF Knock-Out (RFKO) system. The SRS will use two separate control loops to control each regulation element simultaneously. It will be critical to co-ordinate the SRS processes within the machine cycle and within each spill interval. The SRS has been designed to have a total Gain-Bandwidth product of 10 kHz, which can be used to mitigate several sources of ripple in the spill pro-file.

43 PARTICLE ACCELERATORS↗

Nuclear-renewable hybrid energy systems: Opportunities, interconnections, and needs

As the U.S. energy system evolves, the amount of electricity from variable-generation sources is likely to increase, which could result in additional times when electricity demand is lower than available production. Thus, purveyors of technologies that traditionally have provided base-load electricity—such as nuclear power plants—can explore new operating procedures to deal with the associated market signals. Concurrently, innovations in nuclear reactor design coupled with sophisticated control systems now allow for more complex apportionment of heat within an integrated system such as one linked to energy-intensive chemical processes. This paper explores one opportunity – nuclear-renewable hybrid energy systems. These are defined as integrated facilities comprised of nuclear reactors, renewable energy generation, and industrial processes that can simultaneously address the need for grid flexibility, greenhouse gas emission reductions, and optimal use of investment capital. Six aspects of interaction (interconnections) between elements of nuclear-renewable hybrid energy systems are identified: Thermal, electrical, chemical, hydrogen, mechanical, and information. Additionally, system-level aspects affect selection, design, and operation of this hybrid system type. Throughout the paper, gaps and research needs are identified to promote further exploration of the topic.

30 DIRECT ENERGY CONVERSION↗

Solvent-Free Melt-Processed Cathode Mitigates Li Anode Instability in Polymer-Based Solid-State Batteries

Solvent-free manufacturing of battery components is a promising alternative to traditional slurry processing for reducing the cost and environmental impact. In this work, we used twin-screw melt extrusion to fabricate a polymer-based high voltage composite cathode. The melt-processed cathode is dense (near zero porosity) and thick (65 μm) and has high active material loading (80 wt %). The active particles are distributed uniformly throughout the melt-processed cathode, unlike the traditional slurry-cast cathode, which exhibits inhomogeneous particle distribution. In the melt-processed cathode, polymer and carbon form separate phases, whereas in the slurry-cast cathode they blend into a single phase. Due to these structural differences, the melt-processed cathode shows smooth charge–discharge profiles, while the slurry-cast cathode shows noisy charging and soft-shorting behavior. In conclusion, this work highlights that twin-screw extrusion as a scalable, solvent-free manufacturing method is advantageous in producing uniform cathodes, which mitigates anode instability.

25 ENERGY STORAGE↗

BETO 2021 Peer Review - Rational Design of Robust Reactor Feeding Systems for Heterogeneous Cellulosic and Agricultural Wastes Based on Biomass Quality Characteristics

Consistent and reliable preprocessing, conveyance, and reactor in-feed systems, particularly for low-cost waste feedstocks, remains a major technical challenge for the emerging Bioeconomy. By identifying critical biomass attributes and connecting them to flow and conversion behavior, science-driven system designs can address these often-overlooked solids handling challenges. The Wonderful Company (TWC) is the world's largest almond and pistachio grower, generating 250,000 dry tons/year of waste material including hulls, shells, and wood (>5 million tons/year industry wide in the U.S.). This project seeks to turn this environmental and economic liability into a sustainable and profitable resource, targeting conversion via gasification to syngas for electricity and bio-char, by addressing related material handling and feeding challenges. Based on optimized preprocessing strategies, bulk material flow, and thermal conversion properties, an overall system design will be developed. The methodology will be tested with FCIC's benchmark loblolly pine residues, to demonstrate the robustness of the overall approach and provide insight and guidance for future systems. The project will culminate in extended field trials to demonstrate an improved continuous feeding system with a commercial biomass-to-electricity gasifier vendor, and an economic analysis demonstrating a reduction in electricity production costs by maximizing on-stream time while minimizing preprocessing and CapEx costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Strategic supply system design – a holistic evaluation of operational and production cost for a biorefinery supply chain

Abstract Pioneer cellulosic biorefineries across the United States rely on a conventional feedstock supply system based on one‐year contracts with local growers, who harvest, locally store, and deliver feedstock in low‐density format to the conversion facility. While the conventional system is designed for high biomass yield areas, pilot scale operations have experienced feedstock supply shortages and price volatilities due to reduced harvests and competition from other industries. Regional supply dependency and the inability to actively manage feedstock stability and quality, provide operational risks to the biorefinery, which translate into higher investment risk. The advanced feedstock supply system based on a network of depots can mitigate many of these risks and enable wider supply system benefits. This paper compares the two concepts from a system‐level perspective beyond mere logistic costs. It shows that while processing operations at the depot increase feedstock supply costs initially, they enable wider system benefits including supply risk reduction (leading to lower interest rates on loans), industry scale‐up, conversion yield improvements, and reduced handling equipment and storage costs at the biorefinery. When translating these benefits into cost reductions per liter of gasoline equivalent ( LGE ), we find that total cost reductions between –$0.46 to –$0.21 per LGE for biochemical and –$0.32 to –$0.12 per LGE for thermochemical conversion pathways are possible. Naturally, these system level benefits will differ between individual actors along the feedstock supply chain. Further research is required with respect to depot sizing, location, and ownership structures. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗