Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Comparison of temperature data from an engine investigation for film-cooled and non-film-cooled, panwise-finned vanes incorporating impingement cooling

The experimental temperature characteristics of two spanwise-finned, impingement-cooled vanes, one with film cooling and one without film cooling, were investigated in a modified J-75 research turbojet engine. Values of maximum temperature, average temperature, and maximum chordwise temperature difference were compared for the two vanes at the midspan. An analytical redesign of the two vane configurations indicated that the maximum and average temperatures and the maximum chordwise temperature difference could be significantly lowered. The experimental tests indicated that suction-surface film cooling may cause increased heat transfer near the trailing edge of the vane.

Gauntner, D. J.↗

Phase 1 engineering and technical data report for the thermal control extravehicular life support system

A shuttle EVLSS Thermal Control System (TCS) is defined. Thirteen heat rejection subsystems, thirteen water management subsystems, nine humidity control subsystems, three pressure control schemes and five temperature control schemes are evaluated. Sixteen integrated TCS systems are studied, and an optimum system is selected based on quantitative weighting of weight, volume, cost, complexity and other factors. The selected sybsystem contains a sublimator for heat rejection, a bubble expansion tank for water management, and a slurper and rotary separator for humidity control. Design of the selected subsystem prototype hardware is presented.

Source record↗

JANNAF Rocket Engine Performance Test Data Acquisition and Interpretation Manual

Procedures recommended by the JANNAF Performance Standardization Working Group for acquisition and Interpretation of performance test data are presented. Included with the description of these procedures are recommended procedures covering the required measurements, associated instrumentation, calibration methods, and data uncertainties. In addition, criteria for the applicability of existing test data, the selection of test models, and analytical performance prediction improvement based on test results are outlined. Three sample cases using the recommended procedures are presented as an addendum under separate cover. Author

Evans, S. A.↗

Statistical classification techniques for engineering and climatic data samples

Fisher's sample linear discriminant function is modified through an appropriate alteration of the common sample variance-covariance matrix. The alteration consists of adding nonnegative values to the eigenvalues of the sample variance covariance matrix. The desired results of this modification is to increase the number of correct classifications by the new linear discriminant function over Fisher's function. This study is limited to the two-group discriminant problem.

Temple, E. C.↗

High performance jet-engine flight test data base for HSR

The primary acoustic priority of the flight test data base for HSR is the validation of the NASA Aircraft Noise Prediction Program (ANOPP) and other source noise codes. Also, the noise measurements are an important support function for the High Lift Program devoted to HSR. Another concern that will be addressed is a possible noise problem 7-20 miles from take-off during climbout. The attention arises from the higher speeds envisioned for the HSCT compared to conventional aircraft causing levels to increase because of Doppler amplification in conjunction with high source levels due to jet noise. An attempt may be made to measure airframe noise for the F-16XL test which would provide an assessment of this noise component for delta wing aircraft.

Kelly, Jeffrey↗

Mexico Disasters: Comparing Feasibility of Flood Detection Methods Using Google Earth Engine and Open Data Cube for Flood Mitigation in Mexico

In coordination with out partner's, we identified three case studies for the application of the flood detection algorithms. The first case study analyzes the impacts of Hurricane Sally on Villahermosa, Tabasco resulting in urban flooding and impacting adjacent cropland. The second case study investigates floods in Salto de Agua, Chiapas caused by Hurricane Eta, where the Xanil River level exceeded 14 meters, pouring into the surrounding villages. Finally, we look further north to Tula de Allende, Hidalgo during Hurricane Ida, where floods collapsed the power supply citywide and caused numerous deaths.

John Willis↗

A Posteriori Ontology Engineering for Data-Driven Science

Science—and biology in particular—has a rich tradition in categorical knowledge management. This continues today in the generation and use of formal ontologies. Unfortunately, the link between hard data and ontological content is predominately qualitative, not quantitative. The usual approach is to construct ontologies of qualitative concepts, and then annotate the data to the ontologies. This process has seen great value, yet it is laborious, and the success to which ontologies are managing and organizing the full information content of the data is uncertain. An alternative approach is the converse: use the data itself to quantitatively drive ontology creation. Under this model, one generates ontologies at the time they are needed, allowing them to change as more data influences both their topology and their concept space. We outline a combined approach to achieve this, taking advantage of two technologies, the mathematical approach of Formal Concept Analysis (FCA) and the semantic web technologies of the Web Ontology Language (OWL).

Gessler, Damian Dg↗

Hypersonic research engine project. Phase 2: Aerothermodynamic Integration Model (AIM) data reduction computer program, data item no. 54.16

The data reduction program used to analyze the performance of the Aerothermodynamic Integration Model is described. Routines to acquire, calibrate, and interpolate the test data, to calculate the axial components of the pressure area integrals and the skin function coefficients, and to report the raw data in engineering units are included along with routines to calculate flow conditions in the wind tunnel, inlet, combustor, and nozzle, and the overall engine performance. Various subroutines were modified and used to obtain species concentrations and transport properties in chemical equilibrium at each of the internal and external engine stations. It is recommended that future test plans include the configuration, calibration, and channel assignment data on a magnetic tape generated at the test site immediately before or after a test, and that the data reduction program be designed to operate in a batch environment.

Gaede, A. E.↗

Core noise investigation of the CF6-50 turbofan engine

Acoustic data obtained during the running of the CF6-50 turbofan engine on an outdoor test stand are presented. The test was conducted to acquire simultaneous internal and far-field measurements to determine the influence of internally generated noise on the far-field measurements. The data includes internal and far-field narrowband and one-third octave band pressure spectra.

Doyle, V. L.↗