Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Development of Coherent X-ray Diffraction Apparatus with Kirkpatrick-Baez Mirror Optics

To realize coherent x-ray diffraction microscopy with higher spatial resolution, it is necessary to increase the density of x-ray photons illuminated onto the sample. In this study, we developed a coherent x-ray diffraction apparatus with Kirkpatrick-Baez mirror optics. By using mirrors fabricated by elastic emission machining, a high-density coherent x-ray beam was produced. In a demonstration experiment using a silver nanocube as a sample, a high-contrast coherent x-ray diffraction pattern was observed over a wide-q range. This proves that both the density and the degree of coherence of the focused beam were high.

07 ISOTOPE AND RADIATION SOURCES↗

Effects of pre-annealing on the uni- and bi-axial stretching behavior of poly(ethylene naphthalate) films

Effect of pre-annealing on stress and birefringence behavior of poly(ethylene naphthalate) (PEN) films during stretching and relaxation processes was investigated. Amorphous and non-oriented PEN films were pre-annealed under the conditions of different temperatures and periods. The pre-annealed films were stretched uniaxially or equi-biaxially and then relaxed at fixed length. It was found that pre-annealing did not cause any notable change for the initial behavior of refractive indices variation, whereas the behaviors after necking were significantly affected. Through the comparison between in-plane and out-of-plane birefringence and the analysis of wide-angle x-ray diffraction patterns of drawn films of both stretching modes, it was confirmed that the orientation of naphthalene ring in the film plane was enhanced by pre-annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Random fan-out state induced by site-random interlayer couplings

We study the low-temperature properties of a classical Heisenberg model with site-random interlayer couplings on the cubic lattice. This model is introduced as a simplified effective model of Sr(Fe{sub 1-x}Mn{sub x})O{sub 2}, which was recently synthesized. In this material, when x=0.3, ({pi}{pi}{pi}) and ({pi}{pi}0) mixed ordering is observed by neutron diffraction measurements. Using Monte Carlo simulations, we find an exotic bulk spin structure that explains the experimentally obtained results. We name this spin structure the ''random fan-out state.'' The mean-field calculations provide an intuitive understanding of this phase being induced by the site-random interlayer couplings. Since Rietveld analysis assuming the random fan-out state agrees well with the neutron diffraction pattern of Sr(Fe{sub 0.7}Mn{sub 0.3})O{sub 2}, we conclude that the random fan-out state is reasonable for the spin-ordering pattern of Sr(Fe{sub 0.7}Mn{sub 0.3})O{sub 2} at the low-temperature phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Co(II) Doping of Zinc Oxide Nanocrystals

Dopants are non-native atoms commonly used to modify the properties of bulk semiconductors. In this paper we demonstrate that by controlling the addition of cobalt(II) to growing zinc oxide nanocrystals (ZnO NCs) it is possible to modulate the resulting properties. We show that the environment of cobalt may be controlled by varying the synthetic conditions, mainly through varying the time of dopant-precursor addition and concentration. These conditions prove critical to the resulting Co(II) configuration, which affects both the luminescent and photocatalytic properties of the ZnO NCs. Presynthetic doping with 2% Co(II) results in a 98% quenching of the visible emission of ZnO, whereas the same quantity doped post synthesis results in only a 60% quenching. The environment of cobalt in the ZnO wurtzite lattice is identified through UV-vis spectroscopy. The wurtzite structure of the ZnO lattice for all nanocrystalline species is confirmed through X-ray diffraction patterns obtained from a synchrotron radiation source. Postsynthetically doped Co(II) in ZnO NC is demonstrated to have potential applications as an 'on-off' sensor, as exemplified with nitric oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exchange-spring mechanism of soft and hard ferrite nanocomposites

Graphical abstract: - Highlights: • Exchange-spring behaviour of soft and hard ferrites was studied. • XRD patterns indicated soft and hard ferrites as fcc and hcp structure. • Hysteresis loops indicate wide difference in coercivity of soft and hard phases. • Nanocomposites produced convex hysteresis loop characteristic of single-phase. - Abstract: The paper reports exchange-spring soft and hard ferrite nanocomposites synthesized by chemical co-precipitation with or without the application of ultrasonic vibration. The composites contained BaFe{sub 12}O{sub 19} as the hard phase and CoFe{sub 2}O{sub 4}/MgFe{sub 2}O{sub 4} as the soft phase. X-ray diffraction patterns of the samples in the optimum calcined condition indicated the presence of soft ferrites as face-centred cubic (fcc) and hard ferrites as hexagonal close packed (hcp) structure respectively. Temperature dependence of magnetization in the range of 20–700 °C demonstrated distinct presence of soft and hard ferrites as magnetic phases which are characterized by wide difference in magnetic anisotropy and coercivity. Exchange-spring mechanism led these nanocomposite systems to exchange-coupled, which ultimately produced convex hysteresis loops characteristic of a single-phase permanent magnet. Fairly high value of coercivity and maximum energy product were observed for the samples in the optimum calcined conditions with a maximum applied field of 1600 kA/m (2 T)

36 MATERIALS SCIENCE↗

Development of the multi-anvil assembly 6-6 for DIA and D-DIA type high-pressure apparatuses

A newly designed anvil assembly, Multi-anvil Assembly 6-6 (MA6-6), was developed. This assembly consists of six small anvils with an anvil guide, and can be compressed by DIA-type and deformation-DIA (D-DIA) apparatuses. The use of this anvil assembly simplifies the process of replacing anvils with those having different truncated edge length and/or hardness. As a consequence, the time needed for anvil replacement is significantly shortened. This is a benefit to experiments at synchrotron facilities because anvil replacement has to be carried out within the limited beamtime. Using a combination of an MA6-6 and DIA-type apparatus, pressure above 12 GPa was generated. A deformation experiment of polycrystalline MgO was performed using an MA6-6 with D-DIA at 4 GPa and room temperature. Two-dimensional X-ray diffraction patterns and X-ray radiographic images were collected from the deforming sample using monochromatic X-rays. Quantitative deformation experiments can be carried out using this experimental setup.

43 PARTICLE ACCELERATORS↗

Reducibility of PbO in Lead Silicate Glasses

X-ray diffraction data and X-ray fluorescence analysis data for microchannel plates are presented. From X-ray diffraction patterns, one can estimate the amount of reduced lead in microchannel plates and make sure of the presence of both metallic lead and semiconducting PbO{sub x} with a variable oxygen content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Removal of spurious data in Bragg coherent diffraction imaging: an algorithm for automated data preprocessing

Bragg coherent diffraction imaging (BCDI) provides a powerful tool for obtaining high-resolution structural information from nanocrystalline materials. Here a BCDI sample consisting of a large number of randomly oriented nanoscale crystals is considered. Ideally, only one crystal is oriented to produce a Bragg peak on the detector. However, diffraction from other crystals often produces additional signals on the detector. Before the measured diffraction patterns can be processed into structural images, scientists routinely need to manually identify and remove the `alien' intensities from sources other than the intended crystal. With the development of modern high-coherence storage rings, such as the upgraded Advanced Photon Source (APS), the already slow process of manual preprocessing will be untenable for the large volumes of data that will be produced. An automated method of identifying and deleting alien intensities is proposed. This method exploits the fact that BCDI of a perfect crystal produces diffraction data with inversion symmetry around the Bragg peak. This approach uses the machine learning clustering method DBSCAN to distinguish between diffraction from multiple sources, and then calculates cluster size and inversion symmetry to assess whether clusters of intensity belong to desired data or alien signals. This approach can dramatically reduce the amount of time spent manually processing data, allowing BCDI data processing capabilities to keep pace with the technological advances of fourth-generation synchrotron light sources.

36 MATERIALS SCIENCE↗

Phase evolution of U-Zr system in a thermal cycling neutron diffraction experiment: as-cast U-35Zr and U-50Zr

Here, phase evolution of as-cast U-35 wt% Zr and U-50 wt% Zr alloys during thermal cycling (303–1073 K) was investigated using in-situ neutron diffraction. Analysis was performed using Rietveld crystal and microstructure refinements from time-of-flight neutron diffraction data, with a focus on evolution of lattice parameter, atom ordering, unit cell volume, and weight fractions during the thermal cycling. Disordered δ-UZr 2 and residual γ-(U,Zr) phase are retained in the field of δ of the U-Zr equilibrium phase diagram for the U-50Zr sample, and in the field between δ and α-U for the U-35Zr sample. The α phase that is present in the reported phase diagrams of U-Zr was not observed in the diffraction patterns. The evolutions of lattice parameter and unit cell volume of δ and γ are affected by both thermal expansion and chemistry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Precipitation in Al–Mg solid solution prepared by solidification under high pressure

The precipitation in Al–Mg solid solution containing 21.6 at.% Mg prepared by solidification under 2 GPa was investigated. The results show that the γ-Al{sub 12}Mg{sub 17} phase is formed and the β′ phase cannot be observed in the solid solution during ageing process. The precipitation of γ and β phases takes place in a non-uniform manner during heating process, i.e. the γ and β phases are first formed in the interdendritic region, which is caused by the inhomogeneous distribution of Mg atoms in the solid solution solidified under high pressure. Peak splitting of X-ray diffraction patterns of Al(Mg) solid solution appears, and then disappears when the samples are aged at 423 K for different times, due to the non-uniform precipitation in Al–Mg solid solution. The direct transformation from the γ to β phase is observed after ageing at 423 K for 24 h. It is considered that the β phase is formed through a peritectoid reaction of α + γ → β which needs the diffusion of Mg atoms across the interface of α/γ phases. - Highlights: • The γ phase is formed and the β′ phase is be observed in Al(Mg) solid solution. • Peak splitting of XRD pattern of Al(Mg) solid solution appears during aged at 150 °C. • The β phase is formed through a peritectoid reaction of α + γ → β.

36 MATERIALS SCIENCE↗

Structure and Synthesizability of Iron–Sulfur Metal–Organic Frameworks

Sulfur-based metal–organic frameworks (MOFs) and coordination polymers (CPs) are an emerging class of hybrid materials that have received growing attention due to their magnetic, conductive, and catalytic properties with potential applications in electrocatalysis and energy storage. In this work, we report a high-throughput virtual screening protocol to predict the synthesizability of candidate metal–sulfur MOFs/CPs by computing the thermodynamically stable structures resulting from a particular combination of metal cluster, linker, cation, and synthetic conditions. Free energies are computed by using all-atom classical mechanical thermodynamic integration. Low-free-energy structures are refined using ab initio density functional theory, and pair distribution functions and powder X-ray diffraction patterns are calculated to complement and guide experimental structure determination. We validate the computational approach by retrospective predictions of the stable structure produced by experimental syntheses, and a subsequent screen predicts Fe 4 S 4 -BDT–TPP as a new thermodynamically stable one-dimensional (1D) CP comprising a redox-active Fe 4 S 4 cluster, a 1,4-benzenedithiolate (BDT) linker, and a tetraphenylphosphonium (TPP) countercation. Furthermore, this material is experimentally synthesized, and the 1D chain structure of the crystal is confirmed using microcrystal electron diffraction. The computational screening pipeline is generically transferable to neutral and ionic MOFs/CPs comprising arbitrary metal clusters, linkers, cations, and synthetic conditions, and we make it freely available as an open source tool to guide and accelerate the discovery and engineering of novel porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Diffraction Study of Two- and Three-dimensional Defects in Bi{sub 12}SiO{sub 20} Crystals

Specimens of Bi{sub 12}SiO{sub 20}(BSO) crystals oriented along <001>, <011> and <111> were examined by electron diffraction and various two- and three-dimensional defects were characterized. Low- angle misoriented sub-grains were found along the [001] and the [111] zone axes. The observed weak reflections elongation along <001> and <011> is attributed to some kind of stacking faults lying in planes perpendicular to these directions. We discuss a complex image of the electron diffraction patterns observed along the [011] zone axis and conclude that these patterns are caused by a second-phase inclusion consisting of BSO, meta-stable phase Bi{sub 2}SiO{sub 5} and SiO{sub 2}.

36 MATERIALS SCIENCE↗

Ge quantum dots encapsulated by AlAs grown by molecular beam epitaxy on GaAs without extended defects

We demonstrate nearly spherical, strain-free, self-assembled Ge quantum dots (QDs) fully encapsulated by AlAs, grown on (100) GaAs by molecular beam epitaxy. The QDs were formed without a wetting layer using a high temperature, in situ anneal. Subsequent AlAs overgrowth was free from anti-phase domains and threading dislocations in cross section transmission electron microscopy. The straddling band alignment for Ge in AlAs promises strong and tunable confinement for both electrons and holes. The reflection high-energy electron diffraction pattern changed from 2 × 3 to 2 × 5 with anneal, which can be explained by surface reconstructions based on the electron-counting model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and structure of high-quality films of copper polyphthalocyanine – 2D conductive polymer

Graphical abstract: - Highlights: • 2D polymers show a big promise for science and technology. • We develop a new procedure for the direct synthesis of copper polyphthalocyanine. • We obtain reliable experimental data on the CuPPC structure. • With the support of quantum chemical calculations we describe electronic structure of CuPPC. - Abstract: Copper polyphthalocyanine (CuPPC), a 2D conjugated polymer, is a promising material for electronics and photovoltaics, but its applications were hindered by a poor processability. We propose an experimental approach, by which thin films of CuPPC, can be directly synthesized in a chemical vapor deposition (CVD) set-up at mild temperature (420 °C). High polymerization degree and high crystallinity of the films were confirmed by TEM, FTIR and UV–vis studies. From XRD and TEM electron diffraction, we conclude that the polymer has AA layer stacking with the inter-layer distance of 0.32 nm. The assignment of X-ray and TEM diffraction patterns was based on quantum-chemical calculations. Based on the latter, we also discuss electronic structure and conclude that CuPPC is rather a semi-metal than semi-conductor.

36 MATERIALS SCIENCE↗

Laser-assisted electron diffraction for femtosecond molecular imaging

We report the observation of laser-assisted electron diffraction (LAED) through the collision of 1 keV electrons with gas-phase CCl{sub 4} molecules in a femtosecond near-infrared laser field. In the angular distribution of the scattered electrons with the energy shifts of ±ℏω, we observed clear diffraction patterns which reflect the geometrical structure of the molecules at the moment of laser irradiation. Our results demonstrate that ultrafast nuclear dynamics of molecules can be probed by LAED with the high temporal (<10 fs) and spatial (∼0.01 Å) resolutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristic point algorithm in laser ektacytometry of red blood cells

We consider the problem of measuring red blood cell deformability by laser diffractometry in shear flow (ektacytometry). A new equation is derived that relates the parameters of the diffraction pattern to the width of the erythrocyte deformability distribution. The numerical simulation method shows that this equation provides a higher accuracy of measurements in comparison with the analogous equation obtained by us earlier. (laser biophotonics)

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Transverse mode imaging of guided matter waves

Ultracold atoms whose de Broglie wavelength is of the same order as an extended confining potential can experience waveguiding along the potential. When the transverse kinetic energy of the atoms is sufficiently low, they can be guided in the lowest order mode of the confining potential by analogy with light guided by a single mode optical fiber. We have obtained the first images of the transverse mode structure of guided matter waves in a confining potential with up to 65% of atoms in the lowest order mode. The coherence of the guided atomic de Broglie waves is demonstrated by the diffraction pattern produced when incident upon a two dimensional periodic structure. Such coherent waveguides will be important atom optic components in devices with applications such as atom holography and atom interferometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Precision Plasmonics with Monomers and Dimers of Spherical Gold Nanoparticles: Nonequilibrium Dynamics at the Time and Space Limits

Monomers and dimers of spherical gold nanoparticles (NPs) exhibit highly uniform plasmonic properties at the single-particle level due to their high structural homogeneity (precision plasmonics). Recent investigations in precision plasmonics have largely focused on static properties using conventional techniques such as transmission electron microscopy and optical dark-field microscopy. Here in this Feature Article, we first highlight the application of femtosecond time-resolved electron diffraction for monitoring the nonequilibrium dynamics of spherical gold NPs after ultrafast optical excitation. The analysis of the transient diffraction patterns allows us to directly obtain quantitative information on the incoherent excitation of the lattice, that is, heating upon electron–lattice equilibration, as well as on the development of strain due to lattice expansion on picosecond time scales. The controlled assembly of two spherical gold NPs into a dimer with a few nanometers gap leads to unique optical properties. Specifically, extremely high electric fields (hot spot) in the gap are generated upon resonant optical excitation. Conventional optical microscopy cannot spatially resolve this unique hot spot due to the optical diffraction limit. We therefore employed nonlinear photoemission electron microscopy to visualize hot spots in single dimers of spherical gold NPs. A quantitative comparison of different single dimers confirms the homogeneity of the hot spots on the single-particle level. Finally, overall, these initial results are highly encouraging because they pave the way to investigate nonequilibrium dynamics in highly uniform plasmonic nanostructures at the time and space limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗