Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Transport properties of lithium- lead-vanadium-telluride glass and glass ceramics

Glasses with the chemical composition 35Li{sub 2}O-(45-x)V{sub 2}O{sub 5−}20PbO-xTeO{sub 2} (where x = 2.5, 5, 7.5, 10, 15 mol %) have prepared by conventional melt quenching method. The electrical conductivity of Li{sup +} ion conducting lead vanadium telluride glass samples has been carried out both as a function of temperature and frequency in the temperature range 503K-563K and over frequencies 40 Hz to 10 MHz. The electronic conduction has been observed in the present systems. When these samples annealed around 400°C for 2hour become the glass ceramic, which also shows increase tendency of conductivity. SEM confines glass and glass ceramic nature of the prepared samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparisons of short carbon nanotubes containing conductive additives of cathode for lithium ion batteries

Graphical abstract: - Highlights: • Short carbon nanotubes (SCNT) containing conductive additives were used. • SCNT/graphite powder (GP) mixture is better than SCNT/mesoporous carbon mixture. • SCNT connect many isolated GP particles to form a more valid conductive network. • SCNT absorb some electrolyte solution allowing quick electrochemical reactions. - Abstract: Short carbon nanotubes (SCNT) containing conductive additives, i.e. SCNT/graphite powder (GP) mixture (SCNTGP) and SCNT/mesoporous carbon (MC) mixture (SCNTMC) were employed as conductive additives for LiCoO{sub 2} cathode. GP and MC have similar particle size, but GP has lower specific surface area and higher electronic conductivity. Electrochemical measurements indicate that SCNTGP is more effective in improving the electrochemical performance of LiCoO{sub 2} composite cathode under the same conditions. The reason is described as follows. SCNT connect the isolated GP particles to form a more valid conductive network. In addition, SCNT has a certain specific mesoporous surface area, which can absorb some electrolyte solution and then provide buffer lithium ions for quick electrochemical reactions. Consequently, the combination of these two factors would be responsible to the improvement in the electrochemical performance of the SCNTGP loaded cathode.

36 MATERIALS SCIENCE↗

Physics-Based Model to Represent Membrane-Electrode Assemblies of Solid-Oxide Fuel Cells Based on Gadolinium-Doped Ceria

This paper reports a physics-based model that predicts membrane-electrode assembly (MEA) performance of solid-oxide fuel cells (SOFCs) with Ce 0.9 Gd 0.1 O 2− δ (GDC10) electrolyte membranes. The paper derives self-consistent thermodynamic and transport properties for GDC1o mobile charged defects (oxide vacancies and reduced-ceria small polarons) by fitting published measurements of oxygen non-stoichiometry and conductivity over ranges of temperature and O 2 partial pressures. The button-cell model is applied to evaluate how mixed ionic-electronic conductivity influences the performance of an SOFC MEA with a GDC10 electrolyte sandwiched between a porous, composite Ni-GDC10 anode and a porous, composite cathode of Sm 0.5 Sr 0.5 CoO 3− δ (i.e., SSC) and GDC10. SSC properties are also derived by fitting published conductivity and oxygen non-stoichiometry measurements. Mixed conductivity of GDC10 and competing charge transfer reactions at both electrodes reduce open circuit voltages due to leakage current and buildup of defect concentrations at electrode-electrolyte interfaces. To fit polarization data, the button-cell model includes heterogeneous reaction rates for defect incorporation on the GDC10 surface along with Butler–Volmer expressions derived for competing charge transfer reaction rates from rigorous analyses assuming rate-limiting, elementary charge transfer reactions for each electrode. The calibrated MEA model can support rigorous SOFC modeling with GDC10 electrolytes over the range of conditions within a fully operating cell.

Electrochemistry↗

Kinetic phenomena in zero-gap semiconductors CuFeS{sub 2} and CuFeTe{sub 2}: Effect of pressure and heat treatment

Electrical resistivity {rho} and Hal coefficient R are measured as a function of the temperature (T = 1.7-310 K) and the magnetic field (up to H = 28 kOe) in zero-gap semiconductor CuFeS{sub 2} samples subjected to hydrostatic compression and under various heat-treatment conditions. At low temperatures, anomalies are observed in the kinetic effects related to the presence of ferromagnetic clusters: the magnetoresistance at T = 4.2 K and T = 20.4 K acquires a hysteretic character and thermopower {alpha} changes its sign at T < 15 K. The temperature dependence of conduction-electron concentration n in CuFeS{sub 2} has a power form in the temperature range T = 14-300 K, which is characteristic of the intrinsic conductivity in zero-gap semiconductors. In CuFeS{sub 2}, we have n(T) {proportional_to} T{sup 1.2}; in isoelectron compound Cu{sub 1.13}Fe{sub 1.22}Te{sub 2}, we have n(T) {proportional_to} T{sup 1.93}. Heat treatment is found to affect the intrinsic conductivity of CuFeS{sub 2}, as the action of hydrostatic compression (carrier concentration changes); that is, the carrier concentration changes. However, a power form of the n(T) and {rho}(T) dependences is retained.

36 MATERIALS SCIENCE↗

Charge transport in molecular junctions: From tunneling to hopping with the probe technique

We demonstrate that a simple phenomenological approach can be used to simulate electronic conduction in molecular wires under thermal effects induced by the surrounding environment. This “Landauer-Büttiker’s probe technique” can properly replicate different transport mechanisms, phase coherent nonresonant tunneling, ballistic behavior, and hopping conduction. Specifically, our simulations with the probe method recover the following central characteristics of charge transfer in molecular wires: (i) the electrical conductance of short wires falls off exponentially with molecular length, a manifestation of the tunneling (superexchange) mechanism. Hopping dynamics overtakes superexchange in long wires demonstrating an ohmic-like behavior. (ii) In off-resonance situations, weak dephasing effects facilitate charge transfer, but under large dephasing, the electrical conductance is suppressed. (iii) At high enough temperatures, k{sub B}T/ϵ{sub B} > 1/25, with ϵ{sub B} as the molecular-barrier height, the current is enhanced by a thermal activation (Arrhenius) factor. However, this enhancement takes place for both coherent and incoherent electrons and it does not readily indicate on the underlying mechanism. (iv) At finite-bias, dephasing effects may impede conduction in resonant situations. We further show that memory (non-Markovian) effects can be implemented within the Landauer-Büttiker’s probe technique to model the interaction of electrons with a structured environment. Finally, we examine experimental results of electron transfer in conjugated molecular wires and show that our computational approach can reasonably reproduce reported values to provide mechanistic information.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2015 Progress Report/July 2016: Iron Oxide Redox Transformation Pathways: The Bulk Electrical Conduction Mechanism

Despite decades of research on the reactivity and stable isotope properties of Fe oxides, the ability to describe the redox behavior of Fe oxides in the environment is still quite limited. This is due, in large part, to the analytical and spatial complexities associated with studying microscopic processes at the Fe oxide-water interface. This project had the long-term vision of filling this gap by developing a detailed understanding of the relationship between interfacial ET processes, surface structure and charge, and mineral semiconducting properties. We focused on the Fe(III)-oxides and oxyhydroxides because of their geochemical preponderance, versatility in synthesis of compositionally, structurally, and morphologically tailored phases, and because they are amenable to a wide range of surface and bulk properties characterization. In particular, reductive transformation of phases such as hematite (α-Fe 2 O 3 ) and goethite (α-FeOOH) in aqueous solution can serve as excellent model systems for studies of electron conduction processes, as well as provide valuable insights into effect of nanoscale conductive materials on contaminant fate at DOE sites. More specifically, the goal of the Iowa component of this project was to use stable Fe isotope measurements to simultaneously measure isotope specific oxidation states and concentrations of Fe at the hematite-water and goethite-water interface. This work builds on our previous work where we used an innovative combination of 57 Fe Mössbauer spectroscopy and high precision isotope ratio measurements (MC-ICP-MS) to probe the dynamics of the reaction of aqueous Fe(II) with goethite. Mössbauer spectroscopy detects 57 Fe only among all other Fe isotopes and we have capitalized on this to spectroscopically demonstrate Fe(II)-Fe(III) electron transfer between sorbed Fe(II) and Fe(III) oxides (Handler, et al., 2009; Gorski, et al. 2010; Rosso et al., 2010). By combining the Mössbauer spectroscopy and stable isotopes measurements, we have been able to simultaneously track the oxidation state and isotope concentration of the bulk Fe oxide and aqueous Fe. One of our most compelling findings is that despite the apparent stability of the Fe(II)-goethite system, there is actually a tremendous amount of Fe atom cycling occurring between the aqueous phase and the bulk goethite as indicated by the isotopic composition of both phases approaching the mass balance average (Handler et al., 2009). How such extensive re-crystallization and Fe atom exchange can occur with no significant morphological change is a fascinating question. Based on previous work from PI Rosso’s group showing that a potential gradient across hematite crystal faces leads to conduction through hematite and growth and dissolution at separate crystal faces we proposed that a redox-driven recrystallization could be occurring that would explain the extensive mixing observed with the isotope data. From our previous studies utilizing Mössbauer spectroscopy, we know that sorption of Fe(II) onto goethite results in electron transfer between the sorbed Fe(II) and the structural Fe(III) in goethite. Oxidation of the sorbed Fe(II) produces growth of goethite on goethite (i.e., homoepitaxy), as well as injection of an electron into goethite. It is possible that electron transfer from sorbed Fe(II) occurs across a potential gradient, and that Fe(II) atoms are dissolved at a different location on the goethite surface. These newly-reduced Fe(II) atoms could then dissolve into the aqueous phase, exposing fresh Fe(III) goethite to the aqueous phase. Through a repeated series of these five steps of sorption–electron transfer–crystal growth–conduction– dissolution, a redox-driven conveyor belt, could be established that would allow all of the goethite to be eventually exposed to the aqueous phase and exchanged. This surface-mediated recrystallization process would result in similar Fe isotope distributions in the aqueous phase and goethite particle, as we have observed here. It would also result in a stable aqueous Fe(II) concentration, if there were equal rates of goethite growth and dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid CFx–Ag2V4O11 as a high-energy, power density cathode for application in an underwater acoustic microtransmitter

This study demonstrates the excellent electrochemical performance of the hybrid carbon fluoride(CFx)/silver vanadium oxide(SVO)/graphene(G) cathode and its potential utilization in Acoustic Telemetry System Transmitter (ATST). The impedance increase issue caused by LiF formation from CFx is effectively addressed by the deposition of conductive silver metal from the reduction of SVO aided by the coexistence of graphene additive thus a prolonged operation voltage is observed with enhanced electronic conductivity throughout the whole discharge process. In particular, the hybrid shows capacity retention of {approx}462 mAhg-1 at 5C rate and 661 mAhg-1 at 1C rate. The peak current delivered from the as-designed hybrid cathode is improved compared with that of commercial Zn/Ag2O batteries suggesting the possibility of the further reduction on the size/weight of the micro batteries which is critical for the transmitters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen nonstoichiometry, thermal expansion and high-temperature electrical properties of layered NdBaCo{sub 2}O{sub 5+{delta}} and SmBaCo{sub 2}O{sub 5+{delta}}

Layered LnBaCo{sub 2}O{sub 5+{delta}} (Ln = Nd, Sm) with the cation-ordered double perovskite structure were synthesized by the solid-state reaction route and characterized by X-ray diffraction, thermogravimetric analysis and dilatometry. For NdBaCo{sub 2}O{sub 5.73} and SmBaCo{sub 2}O{sub 5.61} equilibrated with atmospheric oxygen at low temperatures, tetragonal and orthorhombic polymorphs were found to form, respectively. The oxygen content at 300-1300 K decreases with decreasing rare-earth cation size, whilst {delta} variations and chemical contribution to the apparent thermal expansion in air are substantially lower compared to the disordered (Ln, A)CoO{sub 3-{delta}} (A = Ca, Sr) analogues. The average thermal expansion coefficients are 23.1 x 10{sup -6} K{sup -1} for NdBaCo{sub 2}O{sub 5+{delta}} and 20.8 x 10{sup -6} K{sup -1} for SmBaCo{sub 2}O{sub 5+{delta}} at 300-1370 K and atmospheric oxygen pressure. These values are comparable to those of Bi{sub 2}O{sub 3}-based ionic conductors, but are incompatible with common electrolytes such as stabilized zirconia or doped ceria. The oxygen partial pressure dependencies of the total conductivity and Seebeck coefficient, studied in the P(O{sub 2}) range from 10{sup -10} to 1 atm, confirm predominant p-type electronic conductivity.

36 MATERIALS SCIENCE↗

Linear temperature behavior of thermopower and strong electron-electron scattering in thick F-doped SnO{sub 2} films

Both the semi-classical and quantum transport properties of F-doped SnO{sub 2} thick films (∼1 μm) were investigated experimentally. We found that the resistivity caused by the thermal phonons obeys Bloch-Grüneisen law from ∼90 to 300 K, while only the diffusive thermopower, which varies linearly with temperature from 300 down to 10 K, can be observed. The phonon-drag thermopower is completely suppressed due to the long electron-phonon relaxation time in the compound. These observations, together with the fact that the carrier concentration has negligible temperature dependence, indicate that the conduction electrons in F-doped SnO{sub 2} films possess free-electron-like characteristics. At low temperatures, the electron-electron scattering dominates over the electron-phonon scattering and governs the inelastic scattering process. The theoretical predications of scattering rates of large- and small-energy-transfer electron-electron scattering processes, which are negligibly weak in three-dimensional disordered conventional conductors, are quantitatively tested in this lower carrier concentration and free-electron-like highly degenerate semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring leakage in dielectric films via automated experiments in scanning probe microscopy

Here electronic conduction pathways in dielectric thin films are explored using automated experiments in scanning probe microscopy (SPM). In this study, we use large field of view scanning to identify the position of localized conductive spots and develop an SPM workflow to probe their dynamic behavior at higher spatial resolution as a function of time, voltage, and scanning process in an automated fashion. Using this approach, we observe the variable behaviors of the conductive spots in a 20-nm-thick ferroelectric Hf 0.54 Zr 0.48 O 2 film, where conductive spots disappear and reappear during continuous scanning. There are also fresh conductive spots that develop during scanning. The automated workflow is universal and can be integrated into a wide range of microscopy techniques, including SPM, electron microscopy, optical microscopy, and chemical imaging.

36 MATERIALS SCIENCE↗

Order fractionalization in a Kitaev-Kondo model

We describe a mechanism for order fractionalization in a two-dimensional Kondo lattice model, in which electrons interact with a gapless spin liquid of Majorana fermions described by the Yao-Lee (YL) model. When the Kondo coupling to the conduction electrons exceeds a critical value, the model develops a superconducting instability into a state with a a spinor order parameter with charge 4 and spin ( = 1 2. The broken symmetry state develops a gapless Majorana Dirac cone in the bulk. By including an appropriate gauge string, we can show that the charge 4, spinorial order develops off-diagonal long range order that allows electrons to coherently tunnel arbitrarily long distances through the spin liquid.

36 MATERIALS SCIENCE↗

Interlayer Design for Halide Electrolytes in All‐Solid‐State Lithium Metal Batteries

Abstract All‐solid‐state lithium‐metal batteries (ASSLMBs) are promising for transportation electrification due to their superior safety and high energy density. Lithium halide electrolytes provide excellent processing flexibility, high ionic conductivity, and anodic stability (>4.1 V), making them highly compatible with high‐voltage cathodes, surpassing sulfide electrolytes (<2.1 V). Nevertheless, halide electrolytes suffer from low cathodic stability and form an electronically conductive interphase with lithium, resulting in a critical current density (CCD) of nearly zero. Herein, Li 3 YbCl 6 electrolytes are synthesized that are kinetically stable with lithium by forming an electronic insulating solid electrolyte interphase. Guided by critical overpotential criteria, a PI 3 interlayer is designed that transforms into Li 6 PI 3 upon contact with lithium, substantially reducing the interfacial resistance of Li 3 YbCl 6 against lithium to 34 Ω and achieving a high critical overpotential of 114 mV. By substituting Yb with Lu, Li 3 LuCl 6 electrolytes with Li 6 PI 3 interlayers reach a CCD of 1.0 mA cm −2 at a capacity of 1.0 mAh cm −2 , comparable to sulfide electrolytes but with higher oxidation stability. Additionally, Li 6 PI 3 enables stable cycling of Li//Li cells with Li 3 LuCl 6 electrolytes at 0.5 mA cm −2 for 400 cycles and maintains 86.5% capacity in Li//LiCoO 2 cells after 220 cycles at 30 °C, paving the way for high‐performance ASSLMBs.

Chemistry↗

Characterization of Electronic and Ionic Transport in Li 1-x Ni 0.8 Co 0.15 Al 0.05 O 2 (NCA)

Despite the extensive commercial use of Li 1-x Ni 0.8 Co 0.15 Al 0.05 O 2 (NCA) as the positive electrode in Li-ion batteries, and its long research history, its fundamental transport properties are poorly understood. These properties are crucial for designing high energy density and high power Li-ion batteries. Here, the transport properties of NCA are investigated using impedance spectroscopy and dc polarization and depolarization techniques. The electronic conductivity is found to increase with decreasing Li-content from ~10 –4 Scm –1 to ~10 –2 Scm –1 over x = 0.0 to 0.6, while lithium ion conductivity is at least five orders of magnitude lower for x = 0.0 to 0.75. A surprising result is that the lithium ionic diffusivity vs. x shows a v-shaped curve with a minimum at x = 0.5, while the unit cell parameters show the opposite trend. This suggests that cation ordering has greater influence on the composition dependence than the Li layer separation, unlike other layered oxides. From temperature-dependent measurements in electron-blocking cells, the activation energy for lithium ion conductivity (diffusivity) is found to be 1.25 eV (1.20 eV). In conclusion, chemical diffusion during electrochemical use is limited by lithium transport, but is fast enough over the entire state-of-charge range to allow charge/discharge of micron-scale particles at practical C-rates.

25 ENERGY STORAGE↗

Influence of the nonuniform distribution of electronic defects on the physical properties of garnet crystals

The optical and kinetic properties of Y{sub 3}Fe{sub 5}O{sub 12} garnet single crystals have been investigated. A method for determining the conduction electron concentration in the samples using energy-dispersive X-ray fluorescence analysis has been proposed, which makes it possible to estimate the quality of obtained material based on a unified approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the Kondo resonance in the d-CoPc/Au(111) adsorption system

By combining the density functional theory (DFT) and a hierarchical equations of motion (HEOM) approach, we investigate the Kondo phenomena in a composite system consisting of a dehydrogenated cobalt phthalocyanine molecule (d-CoPc) adsorbed on an Au(111) surface. DFT calculations are performed to determine the ground-state geometric and electronic structures of the adsorption system. It is found that the singly occupied d{sub z{sup 2}} orbital of Co forms a localized spin, which could be screened by the substrate conduction electrons. This screening leads to the prominent Kondo features as observed in the scanning tunneling microscopy experiments. We then employ the HEOM approach to characterize the Kondo correlations of the adsorption system. The calculated temperature-dependent differential conductance spectra and the predicted Kondo temperature agree well with the experiments, and the universal Kondo scaling behavior is correctly reproduced. This work thus provides important insights into the relevant experiments, and it also highlights the applicability of the combined DFT+HEOM approach to the studies of strongly correlated condensed matter systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous scattering of electrons in n-Si crystals irradiated with protons

The aim of this study was to gain insight into the effect of irradiation with 25-MeV protons on the Hall mobility of electrons in n-Si crystals. Irradiated crystals with an initial electron concentration 6 x 10{sup 13} cm{sup -3} were studied using the Hall method in the range of temperatures 77-300 K. The studies showed that, in crystals irradiated with the proton dose {Phi} = 8.1 x 10{sup 12} cm{sup -2}, the effective mobility of conduction electrons {mu}{sub eff} increases drastically. This effect is direct evidence that inclusions with relatively high conductivity and with nonrectifying junction at interfaces with semiconductor matrix are predominantly formed in n-Si crystals under these conditions. Agglomerations of interstitial atoms or their associations can represent such inclusions.

36 MATERIALS SCIENCE↗

Revealing the aging process of solid electrolyte interphase on SiOx anode

Abstract As one of the most promising alternatives to graphite negative electrodes, silicon oxide (SiO x ) has been hindered by its fast capacity fading. Solid electrolyte interphase (SEI) aging on silicon SiO x has been recognized as the most critical yet least understood facet. Herein, leveraging 3D focused ion beam-scanning electron microscopy (FIB-SEM) tomographic imaging, we reveal an exceptionally characteristic SEI microstructure with an incompact inner region and a dense outer region, which overturns the prevailing belief that SEIs are homogeneous structure and reveals the SEI evolution process. Through combining nanoprobe and electron energy loss spectroscopy (EELS), it is also discovered that the electronic conductivity of thick SEI relies on the percolation network within composed of conductive agents (e.g., carbon black particles), which are embedded into the SEI upon its growth. Therefore, the free growth of SEI will gradually attenuate this electron percolation network, thereby causing capacity decay of SiO x . Based on these findings, a proof-of-concept strategy is adopted to mechanically restrict the SEI growth via applying a confining layer on top of the electrode. Through shedding light on the fundamental understanding of SEI aging for SiO x anodes, this work could potentially inspire viable improving strategies in the future.

25 ENERGY STORAGE↗

Positive ions and the winter anomaly.

A coordinated rocket program to study winter variability in D-region ionization was conducted at White Sands Missile Range, New Mexico, during the winter of 1970-1971. Parachute-borne blunt probes that measure positive-ion and electron conductivities were flown, in conjunction with other experiments, on Jan. 22 and 26 and Feb. 1, 1971. Both A1 and A3 radiowave absorption techniques were used to indicate anomalous winter days. The two rocket shots in January occurred on such days of high absorption. The first of these was one of quiet solar activity, whereas the second was preceded by a major solar proton event on January 24. The third flight occurred on a normal winter day. We tentatively conclude that we have observed two days of 'anomalous' winter absorption of very different character, one possibly related to a solar disturbance, and one probably entirely induced by meteorological effects. The former day was probably characterized by inhibition of the formation of negative ions due to increased detachment and the latter by decreased ionization loss rate.

Mitchell, J. D.↗