SEARCH · Search NASA

Results for “Element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Development of an orthotropic hole element

A finite element was developed which adequately represents the state of stress in the region around a circular hole in orthotropic material experiencing reasonably general loading. This was achieved with a complementary virtual work formulation of the stiffness and stress matrices for a square element with center circular hole. The assumed stress state provides zero shearing stress on the hole boundary, so the element is suitable for problems involving load transfer without friction. The element has been implemented in the NASTRAN computer program, and sample problem results are presented.

Smith, C. V.↗

NASA NTRS1980

Abundances of energy spectra of individual iron-secondary elements

Relative abundances of individual Iron-secondary elements have been measured using a balloon-borne 6.6 m ster ionization/Cerenkov detector system. The unusually large geometry factor and single-charge resolution yield empirical atmospheric attenuation curves for individual elements which combine with high statistics at float altitude to yield individual element abundances, extrapolated to the top of the atmosphere, with high precision. Results are presented for top-of-the-atmosphere abundances (relative to iron) of individual elements in the Z range 13-30.

Israel, M. H.↗

NASA NTRS1980

Development and evaluation of two non-linear shell elements

Two plate and shell displacement elements are developed for use in large deflection non-linear analysis. The elements are of the 'stability' type, in which non-linear strains are included, with their values optimized by added higher order membrane functions and special types of elemental level constraints. The paper summarizes formulation and computational procedures, and discusses numerical results in detail. Conclusions are given regarding the effectiveness of the elements for solving both linear and non-linear shell analysis problems.

Jones, R. E.↗

NASA NTRS1981

The elemental and isotopic composition of cosmic rays - Silicon to nickel

The reported observations were made with the aid of the Cosmic Ray Isotope Instrument System (CRISIS) which had been designed to detect and resolve the isotopes of cosmic ray nuclei with atomic numbers equal to or greater than 10. The CRISIS detector was flown on a balloon launched from Aberdeen, South Dakota on 1977 May 20. The period 1977 May 19-22 has been classified by Mason et al. (1979) as one of 'superquiet' solar activity, characterized by the lowest fluxes of low-energy solar particles ever observed. The obtained results are presented in a number of graphs and tables. It was found that the elemental and isotopic abundances of Si are solar-like. Elemental S is underabundant in the cosmic rays by a factor of approximately 3 relative to the solar system, but its isotopic composition resembles the solar composition with S-32 being the dominant isotope. Elemental Ar is virtually absent in the source, and the observed isotopic composition is consistent with a secondary origin. Elemental Ni has a solar-like abundance.

Young, J. S.↗

NASA NTRS1981

Accuracy and stability of finite element schemes for the duct transmission problem

An investigation is conducted regarding the feasibility of approaches for improving the efficiency and stability of existing finite element method (FEM) schemes, taking into account both analytical and numerical studies. Of the four schemes considered for the 'steady' problem, the Hermitian Galerkin formulation appears to be the most efficient and therefore the most suitable scheme for futher full scale implementation. The Hermitian residual least squares (RLS) scheme although comparable in accuracy for the cases considered exhibits a slight tendency to cumulative errors. The performance of both the Lagrangian element schemes considered compares poorly with that of their Hermitian element counterparts. This is particularly true of the Lagrangian RLS scheme. The presence of internal oscillatory components is an inevitable consequence of all Galerkin schemes irrespective of element type.

Astley, R. J.↗

NASA NTRS1982

Electrical Connector for Graphite Heating Elements

Connection method applies force to two interfaces: that between heating element proper and heating-element support members and between heating-element support members and metal conductor. Inner rod of new connector system is maintained in tension by a spring (for example, Belleville washers). Connection is sufficiently complaint so tension remains within desired range, regardless of thermal expansion and contraction of various elements.

Mackintosh, B. H.↗

NASA NTRS1982

Finite element thermal-structural modeling of orbiting truss structures

A description of an integrated finite element (FE) thermal-structural approach for accurate and efficient modeling of large space structures is presented. A geometric model with a common discretization for all analyses is employed. It uses improved thermal elements and the results from the thermal analysis directly in the structural analysis without any intervening data processing. The differences between the conventional FE approach as implemented in large programs and an integrated FE approach currently under development are described. Considerations for thermal modeling of truss members is discussed and three thermal truss finite elements are presented. The performance of these elements was evaluated for typical truss members neglecting joint effects. A simple truss with metallic joints and composite members was studied to evaluate the effectiveness of the approach for realistic truss designs. A study of the effects of aluminum joints on the thermal deformations of a simple, plane truss with composite members showed that joint effects may be significant. Further study is needed to assess the role of joint effects on the deformation of large trusses.

Thornton, E. A.↗

NASA NTRS1980

Composition of the earth's upper mantle. II - Volatile trace elements in ultramafic xenoliths

Radiochemical neutron activation analysis was used to determine the nine volatile elements Ag, Bi, Cd, In, Sb, Se, Te, Tl, and Zn in 19 ultramafic rocks, consisting mainly of spinel and garnet lherzolites. A sheared garnet lherzolite, PHN 1611, may approximate undepleted mantle material and tends to have a higher volatile element content than the depleted mantle material represented by spinel lherzolites. Comparisons of continental basalts with PHN 1611 and of oceanic ridge basalts with spinel lherzolites show similar basalt: source material partition factors for eight of the nine volatile elements, Sb being the exception. The strong depletion of Te and Se in the mantle, relative to lithophile elements of similar volatility, suggests that 97% of the earth's S, Se and Te may be in the outer core.

Morgan, J. W.↗

NASA NTRS1981

Heavy-element abundances in He/3/-rich events

Abundances of the elements He through Fe observed on the ISEE-3 during He(3) rich events are reported. Ratios of He(3)-He(4) of not less than about 1, and Fe/O of greater than 1 are found, and rather large event-to-event variations in C, O, Ne, Mg, Si, and S are seen superposed upon the general trend of heavy element enhancement. It is concluded that the discontinuous variation of the neighboring elements in the He(3) rich events could result from differences in the electron temperature of the material prior to injection that give rise to differences in the dominant charge states and cyclotron frequencies of different elements.

Reames, D. V.↗

NASA NTRS1982

The elements of a space operations system

The Space Shuttle has completed its flight test program and is entering operational service with its fifth flight in November 1982. With the completion of Shuttle development, its entry to operational service, and delivery of additional units into field service, it is timely to initiate development of the next elements of the system. The elements of a Space Operations System are the Shuttle, a Station in low earth orbit, and upper stages for low and high energy orbit delivery. To design these elements properly will require a substantial operations analysis effort to characterize the most effective performance tradeoffs among the discrete elements. The Shuttle establishes a new context for the design and execution of operations in space. The components of the Shuttle, Space Station, and upper stages will need to share technology and components to minimize the cost and complexity of the logistics of ownership and operation.

Loftus, J. P., Jr.↗

NASA NTRS1982

Reduction of chromium in Ni-base superalloys through element substitution and rapid solidification processing

The reduction in the use of Cr in Ni base superalloys by the combined approaches of both elemental substitution and rapid solidification processing is studied. The elements Si, Zr, Y and Hf were chosen as potential partial substitutes for Cr in Waspaloy and IN 713LC sine their separate addition to other alloys has previously resulted in enhanced oxidation resistance. The roles of Cr and these replacement elements in determining the microstructure and properties are evaluated. The elements Si, Zr, and Y and Hf are used as partial replacements for Cr in the base superalloys and these resultant alloys are processed using rapid solidification techniques. The mechanical properties and oxidation resistance of the processed materials are evaluated. The microstructure is characterized using state of the art techniques (e.g. analytical transmission electron microscopy), and the mechanism by which these structures are produced is determined.

Fraser, H. D.↗

NASA NTRS1983

A new formulation of hybrid/mixed finite element

A new formulation of finite element method is accomplished by the Hellinger-Reissner principle for which the stress equilibrium conditions are not introduced initially but are brought-in through the use of additional internal displacement parameters. The method can lead to the same result as the assumed stress hybrid model. However, it is more general and more flexible. The use of natural coordinates for stress assumptions leads to elements which are less sensitive to the choice of reference coordinates. Numerical solutions by 3-D solid element indicate that more efficient elements can be constructed by assumed stresses which only partially satisfy the equilibrium conditions.

Pian, T. H. H.↗

NASA NTRS1983

In situ trace element microanalysis

The use of particle-track-radiography and X-ray- fluorescence techniques in the in situ measurement of trace (less than 1000 ppm) elements in single mineral phases of polished sections is surveyed, and examples of their application to ordinary, carbonaceous and enstatite chondrites are provided. Radiographic methods surveyed include fission-track radiography (for U, Th, and Pu-244), alpha radiography using nuclear reactions (for Li and B), alpha autoradiography (for Bi and Pb), and beta autoradiography (for several elements in synthetic or biological samples). Two X-ray-fluorescence methods are compared: (1) photon-induced X-ray emission (PIXE), and (2) the potential use of synchrotron radiation. The latter is shown to allow much greater sensitivity than current PIXE technology and a much broader range of elements than particle-track radiography: the ppm analysis of 10-micron grains for all elements heavier than Na. These advantages are seen as balancing the high cost of accelerator use.

Burnett, D. S.↗

NASA NTRS1982

On conforming mixed finite element methods for incompressible viscous flow problems

The application of conforming mixed finite element methods to obtain approximate solutions of linearized Navier-Stokes equations is examined. Attention is given to the convergence rates of various finite element approximations of the pressure and the velocity field. The optimality of the convergence rates are addressed in terms of comparisons of the approximation convergence to a smooth solution in relation to the best approximation available for the finite element space used. Consideration is also devoted to techniques for efficient use of a Gaussian elimination algorithm to obtain a solution to a system of linear algebraic equations derived by finite element discretizations of linear partial differential equations.

Gunzburger, M. D↗

NASA NTRS1983

The GPRIME approach to finite element modeling

GPRIME, an interactive modeling system, runs on the CDC 6000 computers and the DEC VAX 11/780 minicomputer. This system includes three components: (1) GPRIME, a user friendly geometric language and a processor to translate that language into geometric entities, (2) GGEN, an interactive data generator for 2-D models; and (3) SOLIDGEN, a 3-D solid modeling program. Each component has a computer user interface of an extensive command set. All of these programs make use of a comprehensive B-spline mathematics subroutine library, which can be used for a wide variety of interpolation problems and other geometric calculations. Many other user aids, such as automatic saving of the geometric and finite element data bases and hidden line removal, are available. This interactive finite element modeling capability can produce a complete finite element model, producing an output file of grid and element data.

Wallace, D. R.↗

NASA NTRS1983

Orthotropic hole element

A finite element was developed to adequately represent the state of stress in the region around a circular hole in orthotropic material experiencing reasonably general loading. This has been achieved through a complementary virtual work formulation of the stiffness and stress matrices for a square element with a center circular hole. The element has been incorporated into COSMIC/NASTRAN as a dummy element. Sample problems have been solved and these results are presented.

Markham, J. W.↗

NASA NTRS1983

Generalizing the TRAPRG and TRAPAX finite elements

The NASTRAN TRAPRG and TRAPAX finite elements are very restrictive as to shape and grid point numbering. The elements must be trapezoidal with two sides parallel to the radial axis. In addition, the ordering of the grid points on the element connection card must follow strict rules. The paper describes the generalization of these elements so that these restrictions no longer apply.

Hurwitz, M. M.↗

NASA NTRS1983

CLFE2D: A generalized plane strain finite element program laminated composites subject to mechanical and hygrothermal loading

CLFE2D is a two dimensional generalized plane strain finite element code, using a linear, four node, general quadrilateral, isoparametric element. The program is developed to calculate the displacements, strains, stresses, and strain energy densities in a finite width composite laminate. CLFE2D offers any combination of the following load types: nodal displacements, nodal forces, uniform normal strain, or hygrothermal. The program allows the user to input one set of three dimensional orthotropic material properties. The user can then specify the angle of material principal orientation for each element in the mesh. Output includes displacements, stresses, strains and strain densities at points selected by the user. An option is also available to plot the underformed and deformed finite element meshes.

Buczek, M. B.↗