Search NASA⌕ Search

SEARCH · Search NASA

Results for “Estimates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

How Radiation Oncologists Evaluate and Incorporate Life Expectancy Estimates Into the Treatment of Palliative Cancer Patients: A Survey-Based Study

Purpose: We surveyed how radiation oncologists think about and incorporate a palliative cancer patient’s life expectancy (LE) into their treatment recommendations. Methods and Materials: A 41-item survey was e-mailed to 113 radiation oncology attending physicians and residents at radiation oncology centers within the Boston area. Physicians estimated how frequently they assessed the LE of their palliative cancer patients and rated the importance of 18 factors in formulating LE estimates. For 3 common palliative case scenarios, physicians estimated LE and reported whether they had an LE threshold below which they would modify their treatment recommendation. LE estimates were considered accurate when within the 95% confidence interval of median survival estimates from an established prognostic model. Results: Among 92 respondents (81%), the majority were male (62%), from an academic practice (75%), and an attending physician (70%). Physicians reported assessing LE in 91% of their evaluations and most frequently rated performance status (92%), overall metastatic burden (90%), presence of central nervous system metastases (75%), and primary cancer site (73%) as “very important” in assessing LE. Across the 3 cases, most (88%-97%) had LE thresholds that would alter treatment recommendations. Overall, physicians’ LE estimates were 22% accurate with 67% over the range predicted by the prognostic model. Conclusions: Physicians often incorporate LE estimates into palliative cancer care and identify important prognostic factors. Most have LE thresholds that guide their treatment recommendations. However, physicians overestimated patient survival times in most cases. Future studies focused on improving LE assessment are needed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evaluation of multiple tracer methods to estimate low groundwater flow velocities

Here, four different tracer methods were used to estimate groundwater flow velocity at a multiple-well site in the saturated alluvium south of Yucca Mountain, Nevada: (1) two single-well tracer tests with different rest or “shut-in” periods, (2) a cross-hole tracer test with an extended flow interruption, (3) a comparison of two tracer decay curves in an injection borehole with and without pumping of a downgradient well, and (4) a natural-gradient tracer test. Such tracer methods are potentially very useful for estimating groundwater velocities when hydraulic gradients are flat (and hence uncertain) and also when water level and hydraulic conductivity data are sparse, both of which were the case at this test location. The purpose of the study was to evaluate the first three methods for their ability to provide reasonable estimates of relatively low groundwater flow velocities in such low-hydraulic-gradient environments. The natural-gradient method is generally considered to be the most robust and direct method, so it was used to provide a “ground truth” velocity estimate. However, this method usually requires several wells, so it is often not practical in systems with large depths to groundwater and correspondingly high well installation costs. The fact that a successful natural gradient test was conducted at the test location offered a unique opportunity to compare the flow velocity estimates obtained by the more easily deployed and lower risk methods with the ground-truth natural-gradient method. The groundwater flow velocity estimates from the four methods agreed very well with each other, suggesting that the first three methods all provided reasonably good estimates of groundwater flow velocity at the site. We discuss the advantages and disadvantages of the different methods, as well as some of the uncertainties associated with them.

58 GEOSCIENCES↗

Estimation of volume-weighted average grain size in Fe-based nanocrystalline soft magnetic materials by autocorrelation function

Highlights: • Normalized ACF of TEM images estimates the volume-weighted average grain size. • Grain size estimation by normalized ACF shows good accuracy and time efficiency. • Normalized ACF can reveal grain size difference in different areas of a TEM sample. • Normalized ACF helps modelling of grain size distributions in Fe-B nanostructures. - Abstract: The coercivity of Fe-based nanocrystalline soft magnetic materials depends critically on the grain size of bcc-Fe grains. Accurately estimating the volume-weighted mean grain size is extremely important to develop new Fe-based nanocrystalline soft magnetic materials with low coercivity. This article shows that autocorrelation analysis of dark-field transmission electron microscope (TEM) images provides a very good estimation of bcc-Fe grain size in nanocrystalline soft magnetic materials. This method can be used to efficiently estimate the volume-weighted average grain size from multiple TEM images with much less inherent bias than manual measurement techniques. The estimated grain sizes show good consistency to the grain sizes estimated by X-ray diffraction (XRD) and manual measurement. In contrast to XRD, this method can also reveal the differences in grain size from different micron-sized regions of a sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A method for estimating direct normal solar irradiation from satellite data for a tropical environment

In order to investigate a potential use of concentrating solar power technologies and select an optimum site for these technologies, it is necessary to obtain information on the geographical distribution of direct normal solar irradiation over an area of interest. In this work, we have developed a method for estimating direct normal irradiation from satellite data for a tropical environment. The method starts with the estimation of global irradiation on a horizontal surface from MTSAT-1R satellite data and other ground-based ancillary data. Then a satellite-based diffuse fraction model was developed and used to estimate the diffuse component of the satellite-derived global irradiation. Based on this estimated global and diffuse irradiation and the solar radiation incident angle, the direct normal irradiation was finally calculated. To evaluate its performance, the method was used to estimate the monthly average hourly direct normal irradiation at seven pyrheliometer stations in Thailand. It was found that values of monthly average hourly direct normal irradiation from the measurements and those estimated from the proposed method are in reasonable agreement, with a root mean square difference of 16% and a mean bias of -1.6%, with respect to mean measured values. After the validation, this method was used to estimate the monthly average hourly direct normal irradiation over Thailand by using MTSAT-1R satellite data for the period from June 2005 to December 2008. Results from the calculation were displayed as hourly and yearly irradiation maps. These maps reveal that the direct normal irradiation in Thailand was strongly affected by the tropical monsoons and local topography of the country. (author)

14 SOLAR ENERGY↗

Estimation of retired mobile phones generation in China: A comparative study on methodology

Highlights: • The sales data of mobile phones in China was revised by considering the amount of smuggled and counterfeit mobile phones. • The estimation of retired mobile phones in China was made by comparing some relevant methods. • The advanced result of estimation can help improve the policy-making. • The method suggested in this paper can be also used in other countries. • Some discussions on methodology are also conducted in order for the improvement. - Abstract: Due to the rapid development of economy and technology, China has the biggest production and possession of mobile phones around the world. In general, mobile phones have relatively short life time because the majority of users replace their mobile phones frequently. Retired mobile phones represent the most valuable electrical and electronic equipment (EEE) in the main waste stream because of such characteristics as large quantity, high reuse/recovery value and fast replacement frequency. Consequently, the huge amount of retired mobile phones in China calls for a sustainable management system. The generation estimation can provide fundamental information to construct the sustainable management system of retired mobile phones and other waste electrical and electronic equipment (WEEE). However, the reliable estimation result is difficult to get and verify. The priority aim of this paper is to provide proper estimation approach for the generation of retired mobile phones in China, by comparing some relevant methods. The results show that the sales and new method is in the highest priority in estimation of the retired mobile phones. The result of sales and new method shows that there are 47.92 million mobile phones retired in 2002, and it reached to 739.98 million in China in 2012. It presents an increasing tendency with some fluctuations clearly. Furthermore, some discussions on methodology, such as the selection of improper approach and error in the input data, are also conducted in order to improve generation estimation of retired mobile phones and other WEEE.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bayesian Model Averaging for Ensemble-Based Estimates of Solvation Free Energies

This paper applies the Bayesian Model Averaging (BMA) statistical ensemble technique to estimate small molecule solvation free energies. There is a wide range methods for predicting solvation free energies, ranging from empirical statistical models to {\it ab initio} quantum mechanical approaches. Each of these methods are based on a set of conceptual assumptions that can affect a method's predictive accuracy and transferability. Using an iterative statistical process, we have selected and combined solvation energy estimates using an ensemble of 17 diverse methods from the SAMPL4 blind prediction study to form a single, aggregated solvation energy estimate. The ensemble design process evaluates the statistical information in each individual method as well as the performance of the aggregate estimate obtained from the ensemble as a whole. Methods that possess minimal or redundant information are pruned from the ensemble and the evaluation process repeats until aggregate predictive performance can no longer be improved. We show that this process results in a final aggregate estimate that outperforms all individual methods by reducing estimate errors by as much as 91% to 1.2 kcal/mol accuracy. We also compare our iterative refinement approach to other statistical ensemble approaches and demonstrate that this iterative process reduces estimate errors by as much as 61%. This work provides a new approach for accurate solvation free energy prediction and lays the foundation for future work on aggregate models that can balance computational cost with predictive accuracy.

solvation, Bayesian model averaging, Electrostatic↗

Estimating Precommercial Heterogeneous Catalyst Price: A Simple Step-Based Method

Developers of novel catalysts often have limited access to information on the costs of their catalytic materials. The R&D and commercialization decisions made by these researchers would benefit from cost estimates that are accurate and directly comparable to the prices of incumbent catalytic materials, but developing such estimates requires detailed knowledge of industrial synthesis methods and their costs. In order to address one critical part of this need for cost information, namely, the capital and operating costs of using catalyst manufacturing process equipment, a simple and researcher-accessible 'step method' is described herein. This method is based on the estimating techniques that contract manufacturers of industrial catalysts use to develop price quotes for their services. It allows the development of an estimate of catalyst synthesis costs by selection of individual processing steps from a list. Data and methods to allow estimation of processing cost via the step method are provided for synthesis quantities of 1-1000 tons. Price estimates for three example materials, including Pt/C, Ni/Al 2 O 3 , and fluid catalytic cracking catalysts, are described in detail and shown to compare favorably (within +/-20%) with market prices for those materials. Lastly, the step method is placed in the context of a forthcoming free and publicly available catalyst cost estimation tool that will incorporate raw materials pricing, dedicated catalyst plants for higher-volume syntheses, spent catalyst value, and other features.

09 BIOMASS FUELS↗

Underestimating Internal Variability Leads to Narrow Estimates of Climate System Properties

Probabilistic estimates of climate system properties often rely on the comparison of model simulations to observed temperature records and an estimate of the internal climate variability. In this study, we investigate the sensitivity of probability distributions for climate system properties in the Massachusetts Institute of Technology Earth System Model to the internal variability estimate. In particular, we derive probability distributions using the internal variability extracted from 25 different Coupled Model Intercomparison Project Phase 5 models. We further test the sensitivity by pooling variability estimates from models with similar characteristics. We find the distributions to be highly sensitive when estimating the internal variability from a single model. When merging the variability estimates across multiple models, the distributions tend to converge to a wider distribution for all properties. This suggests that using a single model to approximate the internal climate variability produces distributions that are too narrow and do not fully represent the uncertainty in the climate system property estimates.

58 GEOSCIENCES↗

Combining Remotely Sensed Evapotranspiration and an Agroecosystem Model to Estimate Center‐Pivot Irrigation Water Use at High Spatio‐Temporal Resolution

Abstract Estimating irrigation water use accurately is critical for sustainable irrigation and studying terrestrial water cycle in irrigated croplands. However, irrigation is not monitored in most places, and current estimations of irrigation water use has coarse spatial and/or temporal resolutions. This study aims to estimate irrigation water use at the daily and field scale through the proposed model‐data fusion framework, which is achieved by particle filtering with two configurations (concurrent, CON, and sequential, SEQ) by assimilating satellite‐based evapotranspiration (ET) observations into an advanced agroecosystem model, ecosys . Two types of experiments using synthetic and real ET observations were conducted to study the efficacy of the proposed framework for estimating irrigation water use at the irrigated fields in eastern and western Nebraska, United States. The experiments using synthetic ET observations indicated that, for two major sources of uncertainties of ET difference between observations and model simulations, which are bias and noise, noise had larger impacts on degrading the estimation performance of irrigation water use than bias. For the experiments using real ET observations, monthly and annual estimations of irrigation water use matched well with farmer irrigation records, with Pearson correlation coefficient ( r ) around 0.80 and 0.50, respectively. Although detecting daily irrigation records was very challenging, our method still gave a good performance with RMSE, BIAS, and r around 2.90, 0.03, and 0.4 mm/d, respectively. Our proposed model‐data fusion framework for estimating irrigation water use at high spatio‐temporal resolution could contribute to regional water management, sustainable irrigation, and better tracking terrestrial water cycle.

Environmental Sciences & Ecology↗

Reduced carbon emission estimates from fossil fuel combustion and cement production in China

Nearly three-quarters of the growth in global carbon emissions from the burning of fossil fuels and cement production between 2010 and 2012 occurred in China. Yet estimates of Chinese emissions remain subject to large uncertainty; inventories of China’s total fossil fuel carbon emissions in 2008 differ by 0.3 gigatonnes of carbon, or 15 per cent. The primary sources of this uncertainty are conflicting estimates of energy consumption and emission factors, the latter being uncertain because of very few actual measurements representative of the mix of Chinese fuels. Here we re-evaluate China’s carbon emissions using updated and harmonized energy consumption and clinker production data and two new and comprehensive sets of measured emission factors for Chinese coal. We find that total energy consumption in China was 10 per cent higher in 2000–2012 than the value reported by China’s national statistics, that emission factors for Chinese coal are on average 40 per cent lower than the default values recommended by the Intergovernmental Panel on Climate Change, and that emissions from China’s cement production are 45 per cent less than recent estimates. Altogether, our revised estimate of China’s CO 2 emissions from fossil fuel combustion and cement production is 2.49 gigatonnes of carbon (2 standard deviations = ±7.3 per cent) in 2013, which is 14 per cent lower than the emissions reported by other prominent inventories. Over the full period 2000 to 2013, our revised estimates are 2.9 gigatonnes of carbon less than previous estimates of China’s cumulative carbon emissions. Our findings suggest that overestimation of China’s emissions in 2000–2013 may be larger than China’s estimated total forest sink in 1990–2007 (2.66 gigatonnes of carbon) or China’s land carbon sink in 2000–2009 (2.6 gigatonnes of carbon).

54 ENVIRONMENTAL SCIENCES↗

Explicit approximations to estimate the perturbative diffusivity in the presence of convectivity and damping. I. Semi-infinite slab approximations

In this paper, a number of new approximations are introduced to estimate the perturbative diffusivity (χ), convectivity (V), and damping (τ) in cylindrical geometry. For this purpose, the harmonic components of heat waves induced by localized deposition of modulated power are used. The approximations are based on semi-infinite slab approximations of the heat equation. The main result is the approximation of χ under the influence of V and τ based on the phase of two harmonics making the estimate less sensitive to calibration errors. To understand why the slab approximations can estimate χ well in cylindrical geometry, the relationships between heat transport models in slab and cylindrical geometry are studied. In addition, the relationship between amplitude and phase with respect to their derivatives, used to estimate χ, is discussed. The results are presented in terms of the relative error for the different derived approximations for different values of frequency, transport coefficients, and dimensionless radius. The approximations show a significant region in which χ, V, and τ can be estimated well, but also regions in which the error is large. Also, it is shown that some compensation is necessary to estimate V and τ in a cylindrical geometry. On the other hand, errors resulting from the simplified assumptions are also discussed showing that estimating realistic values for V and τ based on infinite domains will be difficult in practice. This paper is the first part (Part I) of a series of three papers. In Part II and Part III, cylindrical approximations based directly on semi-infinite cylindrical domain (outward propagating heat pulses) and inward propagating heat pulses in a cylindrical domain, respectively, will be treated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the estimation of the local dark matter density using the rotation curve of the Milky Way

The rotation curve of the Milky Way is commonly used to estimate the local dark matter density ρDM,⊙. However, the estimates are subject to the choice of the distribution of baryons needed in this type of studies. In this work we explore several Galactic mass models that differ in the distribution of baryons and dark matter, in order to determine ρDM,⊙. For this purpose we analyze the precise circular velocity curve measurement of the Milky Way up to ~ 25 kpc from the Galactic centre obtained from Gaia DR2 [1]. We find that the estimated value of ρDM,⊙ stays robust to reasonable changes in the spherical dark matter halo. However, we show that ρDM,⊙ is affected by the choice of the model for the underlying baryonic components. In particular, we find that ρDM,⊙ is mostly sensitive to uncertainties in the disk components of the Galaxy. We also show that, when choosing one particular baryonic model, the estimate of ρDM,⊙ has an uncertainty of only about 10% of its best-fit value, but this uncertainty gets much bigger when we also consider the variation of the baryonic model. In particular, the rotation curve method does not allow to exclude the presence of an additional very thin component, that can increase ρDM,⊙ by more than a factor of 8 (the thin disk could even be made of dark matter). Therefore, we conclude that exclusively using the rotation curve of the Galaxy is not enough to provide a robust estimate of ρDM,⊙. For all the models that we study without the presence of an additional thin component, our resulting estimates of the local dark matter density take values in the range ρDM,⊙ ≃ 0.3–0.4 GeV/cm 3 , consistent with many of the estimates in the literature.

79 ASTRONOMY AND ASTROPHYSICS↗

DESI DR1 Ly α 1D power spectrum: Validation of estimators

The Data Release 1 (DR1) of the Dark Energy Spectroscopic Instrument (DESI) is the largest sample to date for small-scale Lyα forest cosmology, accessed through its one-dimensional power spectrum (P 1D ). The Lyα forest P 1D is extracted from quasar spectra that are highly inhomogeneous (both in wavelength and between quasars) in noise properties due to intrinsic properties of the quasar, atmospheric and astrophysical contamination, and also sensitive to low-level details of the spectral extraction pipeline. We employ two estimators in DR1 analysis to measure P 1D : the optimal estimator and the fast Fourier transform (FFT) estimator. To ensure robustness of our DR1 measurements, we validate these two power spectrum and covariance matrix estimation methodologies against the challenging aspects of the data. First, using a set of 20 synthetic 1D realizations of DR1, we derive the masking bias corrections needed for the FFT estimator and the continuum fitting bias needed for both estimators. We demonstrate that both estimators, including their covariances, are unbiased with these corrections using the Kolmogorov-Smirnov test. Second, we substantially extend our previous suite of CCD image simulations to include 675,000 quasars, allowing us to accurately quantify the pipeline's performance. This set of simulations reveals biases at the highest k values, corresponding to a resolution error of a few percent. We base the resolution systematics error budget of DR1 P 1D on these values, but do not derive corrections from them since the simulation fidelity is insufficient for precise corrections.

Lyman alpha forest↗

Local Group timing argument and virial theorem mass estimators from cosmological simulations

ABSTRACT We identify Local Group (LG) analogues in the IllustrisTNG cosmological simulation, and use these to study two-mass estimators for the LG: One based on the timing argument (TA) and one based on the virial theorem (VT). Including updated measurements of the Milky Way-M31 tangential velocity and the cosmological constant, we show that the TA mass estimator slightly overestimates the true median LG-mass, though the ratio of the TA to the true mass is consistent at the approximate 90 per cent c.l.. These are in broad agreement with previous results using dark matter-only simulations. We show that the VT estimator better estimates the true LG-mass, though there is a larger scatter in the virial mass to true mass ratio relative to the corresponding ratio for the TA. We attribute the broader scatter in the VT estimator to several factors, including the predominantly radial orbits for LG satellite galaxies, which differs from the VT assumption of isotropic orbits. With the systematic uncertainties we derive, the updated measurements of the LG mass at 90 per cent c.l. are $4.75_{-2.41}^{+2.22} \times 10^{12}$ M⊙ from the TA and $2.0_{-1.5}^{+2.1} \times 10^{12}$ M⊙ from the VT. We consider the LMC’s effect on the TA and VT LG mass estimates, and do not find exact LMC–MW–M31 analogues in the Illustris simulations. However, in LG simulations with satellite companions as massive as the LMC, we find that the effect on the TA and VT estimators is small, though we need further studies on a larger sample of LMC–MW–M31 systems to confirm these results.

79 ASTRONOMY AND ASTROPHYSICS↗

Accurate shear estimation with fourth-order moments

ABSTRACT As imaging surveys progress in exploring the large-scale structure of the Universe through the use of weak gravitational lensing, achieving sub-per cent accuracy in estimating shape distortions caused by lensing, or shear, is imperative for precision cosmology. In this paper, we extend the Fourier power function shapelets (FPFS) shear estimator using fourth-order shapelet moments and combine it with the original second-order shear estimator to reduce galaxy shape noise. We calibrate this novel shear estimator analytically to a sub-per cent level-accuracy using the AnaCal framework. This higher order shear estimator is tested with realistic image simulations, and after analytical correction for the detection/selection bias and noise bias, the multiplicative shear bias $|m|$ is below $3\times 10^{-3}$ (99.7 per cent confidence interval) for both isolated and blended galaxies. Once combined with the second-order FPFS shear estimator, the shape noise is reduced by $\sim 35~{{\ \rm per\ cent}}$ for isolated galaxies in simulations with Hyper Suprime-Cam and Vera C. Rubin Observatory Legacy Survey of Space and Time observational conditions. However, for blended galaxies, the effective number density does not significantly improve with the combination of the two estimators. Based on these results, we recommend exploration of how this framework can further reduce the systematic uncertainties in shear due to point spread function leakage and modelling error, and potentially provide improved precision in shear inference in high-resolution space-based images.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimating Am-241 activity in the body: comparison of direct measurements and radiochemical analyses

The assessment of dose and ultimately the health risk from intakes of radioactive materials begins with estimating the amount actually taken into the body. An accurate estimate provides the basis to best assess the distribution in the body, the resulting dose, and ultimately the health risk. This study continues the time-honored practice of evaluating the accuracy of results obtained using in vivo measurement methods and techniques. Results from the radiochemical analyses of the 241Am activity content of tissues and organs from four donors to the United States Transuranium and Uranium Registries were compared to the results from direct measurements of radioactive material in the body performed in vivo and post mortem. Two were whole body donations and two were partial body donations The skeleton was the organ with the highest deposition of 241Am activity in all four cases. The activities ranged from 30 Bq to 300 Bq. The skeletal estimates obtained from measurements over the forehead were within 20% of the radiochemistry results in three cases and differed by 78% in one case. The 241Am lung activity estimates ranged from 1 Bq to 30 Bq in the four cases. The results from the direct measurements were within 40% of the radiochemistry results in 3 cases and within a factor of 3 for the other case. The direct measurement estimates of liver activity ranged from 2 Bq to 60 Bq and were generally lower than the radiochemistry results. The results from this study suggest that the measurement methods and calibration techniques used at the In Vivo Radiobioassay and Research Facility to quantify the activity in the lungs, skeleton and liver are reasonable under the most challenging conditions where there is 241Am activity in multiple organs. These methods and techniques are comparable to those used at other Department of Energy sites. This suggests that the current in vivo methods and calibration techniques provide reasonable estimates of radioactive material in the body. Not unexpectedly, there can be significant uncertainty in the estimates especially when activity is also present in other organs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Improved estimation of cluster mass profiles from the cosmic microwave background

We develop a new method for reconstructing cluster-mass profiles and large-scale structure from the cosmic microwave background (CMB). By analyzing the likelihood of CMB lensing, we analytically prove that standard quadratic estimators for CMB lensing are unbiased and achieve the optimal condition only in the limit of no lensing; they become progressively biased and suboptimal, when the lensing effect is large, especially for clusters that can be found by ongoing Sunyaev-Zel'dovich surveys. Adopting an alternative approach to the CMB likelihood, we construct a new maximum likelihood estimator that utilizes delensed CMB temperature fields based on an assumed model. We analytically show that this estimator asymptotically approaches the optimal condition as our assumed model is refined, and we numerically show that as we iteratively apply it to CMB maps our estimator quickly converges to the true model with a factor of 10 less number of clusters than standard quadratic estimators need. For realistic CMB experiments, we demonstrate the applicability of the maximum likelihood estimator with tests against numerical simulations in the presence of CMB secondary contaminants. With significant improvement on the signal-to-noise ratio, our new maximum likelihood estimator can be used to measure the cluster-mass cross-correlation functions at different redshifts, probing the evolution of dark energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Real space estimator for the weak lensing convergence from the CMB

We propose an estimator defined in real space for the reconstruction of the weak lensing potential due to the intervening large-scale structure from high resolution maps of the cosmic microwave background. This estimator was motivated as an alternative to the quadratic estimator in harmonic space to surpass the difficulties of the analysis of maps containing galactic cuts and point source excisions. Using maps synthesized by pixel remapping, we implement the estimator for two experiments, namely, one in the absence and one in the presence of detector noise, and compare the reconstruction of the convergence field with that obtained with the quadratic estimator defined in harmonic space. We find good agreement between the input and the reconstructed power spectra using the proposed real space estimator. We discuss interesting features of the real space estimator and future extensions of this work.

79 ASTRONOMY AND ASTROPHYSICS↗