Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explainability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Snow cover and temperature relationships in North America and Eurasia

In this study the snow cover extent during the autumn months in both North America and Eurasia has been related to the ensuing winter temperature as measured at several locations near the center of each continent. The relationship between autumn snow cover and the ensuing winter temperatures was found to be much better for Eurasia than for North America. For Eurasia the average snow cover extent during the autumn explained as much as 52 percent of the variance in the winter (December-February) temperatures compared to only 12 percent for North America. However, when the average winter snow cover was correlated with the average winter temperature it was found that the relationship was better for North America than for Eurasia. As much as 46 percent of the variance in the winter temperature was explained by the winter snow cover in North America compared to only 12 percent in Eurasia.

Foster, J.↗
NASA NTRS1982

Unsymmetrically laminated composites

Classical lamination theory predicts that the room-temperature shapes of all elevated-temperature cure, unsymmetrically laminated composites are saddles. However, experimental observation indicates that the shapes are often cylindrical. In addition, a second cylindrical can sometimes be obtained from the first by a simple snap-through action. A geometrically nonlinear extension to classical lamination theory is used to explain this behavior. Approximate solutions to the nonlinear extension are obtained by using a Rayleigh-Ritz minimization of the laminate's total potential energy. A stability analysis explains the dual cylindrical shapes.

Hyer, M. W.↗
NASA NTRS1983

Collision-induced absorption in the far infrared spectrum of Titan

The effects of collision-induced absorption on the far infrared spectrum of Titan have been investigated. After a review of the procedure for the theoretical calculation of the N2 translation-rotational spectrum, new results for the temperature range o 70 to 120 K are reported. These are used as input data for a simple atmospheric model in order to compute the far infrared radiance, brightness temperature, and specral limb function. This source of opacity alone is not capable of explaining the Voyager results. When the collision-induced methane is included, the results are in closer agreement in the range between 200 and 300/cm, suggesting that a more complete treatment of collision-induced absorption including particularly CH4-N2, N2-H2, and H2-H2 results, may provide sufficient opacity to reduce or obviate the need for opacities due to clouds or aerosols in order to explain the observed spectra.

Hunt, J. L.↗
NASA NTRS1983

The structure of boron in boron fibres

The structure of noncrystalline, chemically vapour-deposited boron fibres was investigated by computer modelling the experimentally obtained X-ray diffraction patterns. The diffraction patterns from the models were computed using the Debye scattering equation. The modelling was done utilizing the minimum nearest-neighbour distance, the density of the model, and the broadening and relative intensity of the various peaks as boundary conditions. The results suggest that the fibres consist of a continuous network of randomly oriented regions of local atomic order, about 2 nm in diameter, containing boron atoms arranged in icosahedra. Approximately half of these regions have a tetragonal structure and the remaining half a distorted rhombohedral structure. The model also indicates the presence of many partial icosahedra and loose atoms not associated with any icosahedra. The partial icosahedra and loose atoms indicated in the present model are in agreement with the relaxing sub-units which have been suggested to explain the anelastic behavior of fibre boron and the loosely bound boron atoms which have been postulated to explain the strengthening mechanism in boron fibres during thermal treatment.

Bhardwaj, J.↗
NASA NTRS1983

Incident reporting: Its role in aviation safety and the acquisition of human error data

The rationale for aviation incident reporting systems is presented and contrasted to some of the shortcomings of accident investigation procedures. The history of the United State's Aviation Safety Reporting System (ASRS) is outlined and the program's character explained. The planning elements that resulted in the ASRS program's voluntary, confidential, and non-punitive design are discussed. Immunity, from enforcement action and misuse of the volunteered data, is explained and evaluated. Report generation techniques and the ASRS data analysis process are described; in addition, examples of the ASRS program's output and accomplishments are detailed. Finally, the value of incident reporting for the acquisition of safety information, particularly human error data, is explored.

Reynard, W. D.↗
NASA NTRS1983

Shock temperatures in anorthite glass

Temperatures of CaAl2Si2O8 (anorthite glass) shocked to pressures between 48 and 117 GPa were measured in the range from 2500 to 5600 K, using optical pyrometry techniques. The pressure dependence of the shock temperatures deviates significantly from predictions based on a single high pressure phase. At least three phase transitions, at pressures of about 55, 85, and 100 GPa and with transition energies of about 0.5 MJ/kg each (approximately 1.5 MJ/kg total) are required to explain the shock temperature data. The phase transition at 100 GPa can possibly be identified with the stishovite melting transition. Theoretical models of the time dependence of the thermal radiation from the shocked anorthite based on the geometry of the experiment and the absorptive properties of the shocked material yields good agreement with observations, indicating that it is not necessary to invoke intrinsic time dependences to explain the data in many cases.

Boslough, M. B.↗
NASA NTRS1984

Energetic electrons in impulsive solar flares

A new analysis was made of a thermal flare model proposed by Brown, Melrose, and Spicer (1979) and Smith and Lilliequist (1979). They assumed the source of impulsive hard X-rays to be a plasma at a temperature of order 10 to the 8th power K, initially located at the apex of a coronal arch, and confined by ion-acoustic turbulence in a collisionless conduction front. Such a source would expand at approximately the ion-sound speed, C sub S = square root of (k T sub e/m sub i), until it filled the arch. Brown, Melrose, and Spicer and Smith and Brown (1980) argued that the source assumed in this model would not explain the simultaneous impulsive microwave emission. In contrast, the new results presented herein suggest that this model leads to the development of a quasi-Maxwellian distribution of electrons that explains both the hard X-ray and microwave emissions. This implies that the source sizes can be determined from observations of the optically-thick portions of microwave spectra and the temperatures obtained from associated hard X-ray observations. In this model, the burst emission would rise to a maximum in a time, t sub r, approximately equal to L/c sub s, where L is the half-length of the arch. New observations of these impulsive flare emissions were analyzed herein to test this prediction of the model. Observations made with the Solar Maximum Mission spacecraft and the Bern Radio Observatory are in good agreement with the model.

Batchelor, D. A.↗
NASA NTRS1983

The PASCAL-HDM Verification System

The PASCAL-HDM verification system is described. This system supports the mechanical generation of verification conditions from PASCAL programs and HDM-SPECIAL specifications using the Floyd-Hoare axiomatic method. Tools are provided to parse programs and specifications, check their static semantics, generate verification conditions from Hoare rules, and translate the verification conditions appropriately for proof using the Shostak Theorem Prover, are explained. The differences between standard PASCAL and the language handled by this system are explained. This consists mostly of restrictions to the standard language definition, the only extensions or modifications being the addition of specifications to the code and the change requiring the references to a function of no arguments to have empty parentheses.

Source record↗
NASA NTRS1984

A critical review of noise production models for turbulent, gas-fueled burners

The combustion noise literature for the period between 1952 and early 1984 is critically reviewed. Primary emphasis is placed on past theoretical and semi-empirical attempts to predict or explain observed direct combustion noise characteristics of turbulent, gas-fueled burners; works involving liquid-fueled burners are reviewed only when ideas equally applicable to gas-fueled burners are pesented. The historical development of the most important contemporary direct combustion noise theories is traced, and the theories themselves are compared and criticized. While most theories explain combustion noise production by turbulent flames in terms of randomly distributed acoustic monopoles produced by turbulent mixing of products and reactants, none is able to predict the sound pressure in the acoustic farfield of a practical burner because of the lack of a proven model which relates the combustion noise source strenght at a given frequency to the design and operating parameters of the burner. Recommendations are given for establishing a benchmark-quality data base needed to support the development of such a model.

Mahan, J. R.↗
NASA NTRS1984

On the detection of underwater bottom topography by imaging radars

A theoretical model which explains basic properties of radar imaging of underwater bottom topography in tidal channels is presented. The surface roughness modulation is described by weak hydrodynamic interaction theory in the relaxation time approximation. In contrast to previous theories on short wave modulation by long ocean waves, a different approximation is used to describe short wave modulation by tidal flow over underwater bottom topography. The modulation depth is proportional to the relaxation time of the Bragg waves. The large modulation of radar reflectivity observed in SEASAT-SAR imagery of sand banks in the Southern Bight of the North Sea are explained by assuming that the relaxation time of 34 cm Bragg waves is of the order of 30-40 seconds.

Alpers, W.↗
NASA NTRS1983

Impact versus internal origins for mesosiderites

The textures, mineral compositions, and thermal history of mesosiderites are examined to see whether they are compatible with any kind of impact process or internal process which might produce stony-iron breccias. It was proposed that cratering by metal projectiles is not an adequate origin mechanism since it would not deposit enough metal in the stony-iron breccias. It was also proposed that such mechanisms as accretion of differentiated planitesimals must be considered for mesosiderite origins. But no single model for origins is fully satisfactory. Disruption and reassembly of two colliding bodies could form stony-iron breccias at depth, but, as with the previous models, the easiest way to explain the low olivine of mesosiderites is to postulate derivation from olivine-poor chondritic material. Turbulent metal-crust mixing during core formation and crustal blocks sinking into the core withhold olivine from the breccia but do not explain how the silicate and metal liquids in subgroup IV could have failed to segregate.

Hewins, R. H.↗
NASA NTRS1983

A conceptual model of the thermal-spike mechanism in graphte/epoxy laminates

The influence of a thermal spike on a moisture-saturated graphite/epoxy composite was studied in detail. A single thermal spike from 25 to 132 C was found to produce damage, as evidenced by a significant increase in the level of moisture saturation in the composite. Approximately half of this increase remained after a vacuum-anneal at 150 C for seven days, suggesting the presence of an irreversible damage component. Subsequent thermal spikes created less and less additional moisture absorption, with the cumulative effect being a maximum or limiting moisture capacity of the composite. These observations are explained in terms of a model previously developed to explain the reverse thermal effect of moisture absorption in epoxy and epoxy-matrix composites. This model, based on the inverse temperature dependence of free volume, improves current understanding of thermal spike effects in graphite/epoxy composites.

Adamson, M. J.↗
NASA NTRS1982

A non-catastrophist explanation for the iridium anomaly at the Cretaceous/Tertiary boundary

The iridium (Ir) anomaly at the Cretaceous/Tertiary (C/T) boundary can be explained by dissolution of normal pelagic limestones producing an insoluble clay residue containing Ir-rich meteoritic material. Further concentration of Ir and other trace metals in the clay can be explained by deposition under reducing conditions. Clay-mineral analyses indicate that the boundary clay is similar to locally derived clays in the limestones above and below the boundary, and contains no detectable exotic components. This supports a terrestrial origin for the boundary clay. The genesis of the boundary clay is attributed to changes in ocean chemistry (pH and oxygenation), leading to an interval of widespread dissolution of carbonate sequences in the oceans, and culminating in the development of submarine pyritic hardgrounds and a disconformity of global extent.

Rampino, M. R.↗
NASA NTRS1984

ISEE 1 and 2 observations of an oscillating outward moving current sheet near midnight

The ISEE 1 and 2 magnetometers are used to examine a current sheet which is moving outward with a velocity of about 17 km/sec, and whose current is flowing into the ionosphere. A wave is traveling along the current sheet, from midnight toward the east, at 400 km/sec. The plasma oscillations normal to the current sheet associated with this wave are sufficient for explaining the amplitude of the electric field oscillations in the plane of the current sheet observed by the University of California's electric field detector. The present oscillating current sheet model explains both magnetic and electric field observations.

Kelly, T. J.↗
NASA NTRS1984

Diffusive equilibrium distributions of He(+) in the plasmasphere

Recent satellite observations of thermal ion composition in the near-equatorial plasmasphere have shown that He(+) comprises 5-10 percent typically and occasionally 25 percent or more of the total thermal ion density. A steady state diffusive equillibrium model for the distributions of H(+), He(+) and O(+) along a plasmaspheric flux tube is used to elicit effects that may help explain these observed high He(+) fractional concentrations. The model indicates that both the ionospheric composition and the temperature distribution along the flux tubes are important factors controlling the equatorial He(+) composition, through the phlasma scale height and thermal diffusion effects. Direct comparison of the model results with thermal ion observations by ISEE-1 indicates that the effects incorporated into the model may explain some of the elevated He(+) concentrations. In some instances, however, effects not included in the model may be of importance.

Waite, J. H., Jr.↗
NASA NTRS1984

Models of the hard X-ray spectrum of AM Herculis and implications for the accretion rate

Phenomenological fits to the hard X-ray spectrum of AM Hercules have failed to explain the high equivalent width (0.8 + or - 0.1 keV) of Fe K-alpha emission. The scattering and fluorescent line production in a cold or partially ionized accretion column of hard X-rays emitted at the base are investigated using the Monte Carlo method. It is shown that the Fe emission equivalent width observed in the spectrum of AM Her can be explained without resorting to an overabundance of Fe in the accreting material. For sufficient optical depth across the accretion column, equivalent widths of K-alpha emission even larger than the observed values can be obtained. The accretion rate and gravitational power can be deduced from the optical depth across the column, if the column size is known, and, together with the observed hard X-ray and polarized light luminosities, imply a lower limit for the luminosity in the UV to soft X-ray range, for which the observations give model-dependent values.

Swank, J. H.↗
NASA NTRS1984

A two-dimensional model of the nightside ionosphere of Venus Ion energetics

The energetics of the nightside ionosphere of Venus are still not well understood. Large ion temperatures have been observed on the nightside. A two-dimensional theoretical model of the energetics of the nightside ionosphere is constructed which takes into account the effects of horizontal and vertical bulk transport of heat. It is demonstrated that the observed maintenance of the ion temperature can be explained in terms of these transport terms for solar zenith angles less than 150 deg. Simple heat transport cannot explain the observed high temperatures for angles greater than 150 deg.

Bougher, S. W.↗
NASA NTRS1984

Progress in natural laminar flow research

For decades, since the earliest attempts to obtain natural laminar flow (NLF) on airplanes, three classical objections to its practicality have been held in the aeronautical community. These objectives concerned first, the capability to manufacture practical airframe surfaces smooth enough for NLF; second, the apparent inherent instability and sensitivity of NLF; and third, the accumulation of contamination such as insect debris in flight. This paper explains recent progress in our understanding of the achieveability and maintainability of NLF on modern airframe surfaces. This discussion explains why previous attempts to use NLF failed and what has changed regarding the three classical objections to NLF practicality. Future NASA research plans are described concerning exploring the limits of NLF usefulness, production tolerances, operational considerations, transition behavior and measurement methods, and NLF design applications.

Holmes, B. J.↗