Search NASA⌕ Search

SEARCH · Search NASA

Results for “FASTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Development of a Fast-Spectrum Self-Powered Neutron Detector for Molten Salt Experiments in the Versatile Test Reactor

The self-powered neutron detector (SPND) is a widely used flux monitor in thermal nuclear reactors. Although this is a mature technology, the current state of the art is tuned for a thermal neutron spectrum, so many of the devices currently in use lack sensitivity to fast neutrons. Because current in SPNDs is produced through nuclear reactions with the neutron flux inside a reactor, sensitivity in SPNDs is determined by the neutron cross section of the neutron-sensitive portion of the detector, termed the emitter. This neutron cross section drops by orders of magnitude between thermal and fast neutron energies for many emitters in currently used SPNDs, with a corresponding drop in current from the detector. This paper discusses efforts to develop a fast-spectrum self-powered neutron detector (FS-SPND) that is sensitive to neutrons with energies ranging from 0.025 eV up to 1 MeV. An in-depth analysis of Evaluated Nuclear Data File (ENDF)/B-VII.1 neutron-capture cross sections was performed, and four new materials were identified that are suitable emitter candidates for use in measuring fast neutrons. All four materials are stable mid-shell nuclei in the region between doubly magic 132Sn and 208Pb. Each candidate was simulated with the Geant4 Monte Carlo simulation toolkit to optimize overall detector efficiency.

Goetz, Callie↗

Polarized He{sub a}lpha Radiation by Anisotropic Fast Electron Transport in Ultra-Intense Laser Produced Plasmas

In fast ignition research, the transport dynamics of fast electrons is one of the critical issues. Fast electrons generated by an intense laser pulse show a highly anisotropic velocity distribution. To gain insight into the anisotropy of the velocity distribution of fast electrons, polarized x-ray spectroscopy has been proposed. The polarization spectroscopy of Cl He{sub a}lpha radiation was experimentally demonstrated at 10{sup 17} W/cm{sup 2}(approx100 mJ in 130 fs), and a new time-dependent atomic population kinetics code was also developed. It predicts that the high polarization arises only in a low-density region of the target plasma. Additional x-ray polarization measurements were done at 10{sup 1717-18} W/cm{sup 2}(approx10 J in approx1 ps). Polarization was measured as a function of the overcoat thickness of a target. The polarization is negative in the shallow region near the target surface, and becomes near zero at the laser intensity of approx10{sup 18} W/cm{sup 2}. At approx10{sup 17} W/cm{sup 2}, the polarization varies from negative to positive, and finally zero along with an increase in the overcoat thickness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Minority heating by ICRH: a tool for investigating burning plasma physics in FAST

The effects of an energetic ion tail produced by ICRH minority heating have been simulated by iteratively using the transport code JETTO, the full wave code TORIC and the quasi-linear Fokker-Planck routine SSQLFP. This study has been done in order to determine the characteristic fast ion parameters that are necessary for addressing some of the ITER burning plasma physics issues, such as the fast ion transport due to collective mode excitations. The destabilization and saturation of fast ion driven Alfvenic modes are investigated by numerical simulations with the HMGC code, which assumes the anisotropic energetic particle distribution function accelerated by ICRH as input. The Fusion Advanced Studies Torus (FAST) H-mode reference scenario is considered in deuterium plasma with dimensionless parameters similar to those of ITER. The results of this study, obtained by integration of different numerical simulation analyses aimed at investigating the various relevant physics, are presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synergy in Two-Frequency Fast Wave Cyclotron Harmonic Absorption in DIII-D

Fast waves (FWs) at 60 MHz and at 90 MHz are coupled to DIII-D discharges for central heating and current drive at net FW power up to 3.5 MW. The primary absorption mechanism is intended to be direct electron damping in the plasma core. In discharges at B = 2 T with fast deuteron populations from neutral beam injection, 4th and 6th deuterium cyclotron harmonic absorption on the fast ions competes with direct electron damping. Previous experiments have shown that the 6{omega}{sub D} absorption of the 90 MHz FWs is weaker than the 4{omega}{sub D} absorption of 60 MHz FWs, in agreement with a model that includes unspecified edge losses. Recent experiments have shown that if the fast deuterons are accelerated by absorption of 60 MHz (4{omega}{sub D}) FWs, adding 90 MHz power (6{omega}{sub D}) can increase the fusion neutron rate by a larger increment than is obtained with 90 MHz power alone. Details of this synergy between 4{omega}{sub D} and 6{omega}{sub D} absorption are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cherenkov-type diamond detectors for measurements of fast electrons in the TORE-SUPRA tokamak

The paper presents a schematic design and tests of a system applicable for measurements of fast electron pulses emitted from high-temperature plasma generated inside magnetic confinement fusion machines, and particularly in the TORE-SUPRA facility. The diagnostic system based on the registration of the Cherenkov radiation induced by fast electrons within selected solid radiators is considered, and electron low-energy thresholds for different radiators are given. There are some estimates of high thermal loads, which might be deposited by intense electron beams upon parts of the diagnostic equipment within the TORE-SUPRA device. There are some proposed measures to overcome this difficulty by the selection of appropriate absorption filters and Cherenkov radiators, and particularly by the application of a fast-moving reciprocating probe. The paper describes the measuring system, its tests, as well as some results of the preliminary measurements of fast electrons within TORE-SUPRA facility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Three-dimensional evolution of the fast reconnection mechanism in a sheared current sheet

Extending the previous simulation model with the plane symmetry boundaries, the present paper studies the three-dimensional (3D) fast reconnection evolution in the presence of an initial sheared field by employing the axis symmetry boundary conditions. The fast reconnection evolution for the open system, where the reconnection outflow is open to free space, is not significantly influenced by the sheared field, although for the larger magnitude of the sheared field its onset time is more delayed and the fast reconnection process tends to proceed more steadily. In any case, the diffusion region remains to be localized around the X neutral line, and the fast reconnection outflow jet is accelerated to the Alfven velocity by standing slow shocks. The initial sheared field lines are swept away by the reconnection jet, and attached to the jet, a large-scale plasmoid is formed and propagates outward. In the plasmoid, the reconnected sheared field lines are accumulated near the interface between the reconnection jet and the plasmoid, and the sheared field is piled up in the form of a core. The 3D plasmoid propagation is considerably distorted in the direction of the sheared magnetic field since the plasma tends to be accelerated along the sheared field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advances in high-harmonic fast wave physics in the National Spherical Torus Experiment

Improved core high-harmonic fast wave (HHFW) heating at longer wavelengths and during start-up and plasma current ramp-up has now been obtained by lowering the edge density with lithium wall conditioning, thereby moving the critical density for perpendicular fast-wave propagation away from the vessel wall. Lithium conditioning allowed significant HHFW core electron heating of deuterium neutral beam injection (NBI) fuelled H-mode plasmas to be observed for the first time. Large edge localized modes were observed immediately after the termination of rf power. Visible and infrared camera images show that fast wave interactions can deposit considerable rf energy on the outboard divertor. HHFW-generated parametric decay instabilities were observed to heat ions in the plasma edge and may be the cause for a measured drag on edge toroidal rotation during HHFW heating. A significant enhancement in neutron rate and fast-ion profile was measured in NBI-fuelled plasmas when HHFW heating was applied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced surface acceleration of fast electrons by using subwavelength grating targets

Surface acceleration of fast electrons in intense laser-plasma interaction is investigated by using subwavelength grating targets. The fast electron beam emitted along the target surface was enhanced by more than three times relative to that by using planar target. The total number of the fast electrons ejected from the front surface of grating target was two times higher than that of planar target. The method to enhance the surface acceleration of fast electrons may have several applications such as in ion acceleration and the experiment of high energy density physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extended fast-ion D-alpha diagnostic on DIII-D

A fast-ion deuterium-alpha (FIDA) diagnostic, first commissioned on DIII-D in 2005, relies on Doppler-shifted light from charge-exchange between beam neutrals and energetic ions. The second generation (2G) system was installed on DIII-D in 2009. Its most obvious improvement is the spatial coverage with 11 active in-beam and three passive off-beam views; the latter allows for simultaneous monitoring of the background signal. Providing extended coverage in fast-ion velocity space, the new views possess a more tangential component with respect to the toroidal field compared to their first generation counterparts. Each viewing chord consists of a bundle of three 1.5 mm core fibers to maximize light gathering. For greater throughput, fast f/1.8 optical components are used throughout. The signal is transmitted via fiber optics to a patch panel, so the user is able to choose the detector. FIDA was originally installed with a spectrometer and charge-coupled device (CCD) camera to monitor the full D{sub {alpha}} spectrum for two spatial views. 2G adds another spectrometer and CCD that monitor the blue-shifted wing for six spatial views at 1 kHz. In addition, a photomultiplier tube and fast digitizer provide wavelength-integrated signals at 1 MHz for eight spatial views.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Turbulent transport of fast ions in the Large Plasma Device

Strong drift wave turbulence is observed in the Large Plasma Device [H. Gekelman et al., Rev. Sci. Instrum. 62, 2875 (1991)] on density gradients produced by a plate limiter. Energetic lithium ions orbit through the turbulent region. Scans with a collimated ion analyzer and with Langmuir probes give detailed profiles of the fast ion spatial distribution and the fluctuating fields. The fast ion transport decreases rapidly with increasing fast ion gyroradius. Unlike the diffusive transport caused by Coulomb collisions, in this case the turbulent transport is nondiffusive. Analysis and simulation suggest that such nondiffusive transport is due to the interaction of the fast ions with stationary two-dimensional electrostatic turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the fast electron bremsstrahlung emission during electron cyclotron resonance heating in the HL-2A tokamak

A fast electron bremsstrahlung (FEB) diagnostic technique based on cadmium telluride (CdTe) detector has been developed recently in the HL-2A tokamak for measurements of the temporal evolution of FEB emission in the energy range of 10-200 keV. With a perpendicular viewing into the plasma on the equatorial plane, the hard x-ray spectra with eight different energy channels are measured. The discrimination of the spectra is implemented by an accurate spectrometry. The system also makes use of fast digitization and software signal processing technology. An ambient environment of neutrons, gammas, and magnetic disturbance requires careful shielding. During electron cyclotron resonance heating, the generation of fast electrons and the oscillations of electron fishbone (e-fishbone) have been found. Using the FEB measurement system, it has been experimentally identified that the mode strongly correlates with the electron cyclotron resonance heating produced fast electrons with 30-70 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast reciprocating probe system on the EAST superconducting tokamak

A new fast reciprocating probe system (FRPS) has been built and installed on the outer midplane of the EAST tokamak to investigate the profiles of the boundary plasma parameters such as electron density and temperature. The system consists of a two-stage motion drive mechanism: slow motion and fast motion. The fast motion is powered by a servo motor, which drives the probe horizontally up to 50 cm to scan the edge region of the EAST tokamak. The maximum velocity achieved is 2 m/s. High velocity and flexible control of the fast motion are the remarkable features of this FRPS. A specially designed connector installed at the front end of the probe shaft makes it easy to install or replace the probe head on FRPS. During the latest experimental campaign in the spring of 2010, a probe head with seven tips, including two tips for a Mach probe, has been used. An example is given for simultaneous profile measurements of the plasma temperature, plasma density, and the plasma flow velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure and dynamics of the fast reconnection mechanism in an initially force-free current sheet

The present paper studies the three-dimensional structure and dynamics of the fast reconnection mechanism in an initially force-free current sheet. A large-scale plasmoid (current sheet bulge) is formed ahead of the Alfvenic fast reconnection jet (u{sub x{approx}}V{sub A}) generated in a narrow wedgelike region between a pair of slow shocks. The plasmoid structure is divided into the plasmoid reconnection region P and the plasmoid core region C. In the region P, the strongly sheared reconnected field lines are accumulated and the initial (low-beta) plasma pressure is remarkably enhanced to become comparable to the ambient magnetic pressure since the sheared field lines initially embedded in the current sheet are completely swept away by the reconnection jet. On the other hand, in the region C, the magnetized (low-beta) plasma with the sheared (B{sub z}) field lines, initially embedded in the current sheet, is accumulated without reconnection, and the magnitude of the accumulated sheared field becomes much larger than the ambient magnetic field strength. It is demonstrated that the fast reconnection mechanism in an initially force-free current sheet is so powerful to overcome the magnetic tension forces, which result from the large x-directional bent of the sheared field lines, and vitally proceed by effectively extending the fast reconnection jet region in the sheared field (z) direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast electron temperature and conversion efficiency measurements in laser-irradiated foil targets using a bremsstrahlung x-ray detector

Measurements of fast electron temperature and conversion efficiencies using bremsstrahlung x-rays emitted from laser-produced, fast electrons are presented. Experiments were carried out using the Titan laser (150 J, 1.5 ps) at the Lawrence Livermore National Laboratory. The maximum intensity was 2 x 10{sup 20} W/cm{sup 2} on 250 {mu}m thick silver foil targets. The emission of bremsstrahlung x-rays from the fast electrons in the target was measured using a filter-stack based detector. The conversion efficiency of laser energy into fast electrons and the electron temperature were studied as a function of incident laser energy. Several models of the electron divergence angle were investigated, and the effect of the assumed divergence angle on the inferred conversion efficiency was quantified. This allows for upper and lower bounds on the conversion efficiency to be established for a range of possible divergence angles. The value for upper bound is 60% (from a 75 deg. divergence angle model) and for the lower bound is 25% (from a 0 deg. divergence angle model).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations reveal fast mode shocks in magnetic reconnection outflows

Magnetic reconnection is commonly perceived to drive flow and particle acceleration in flares of solar, stellar, and astrophysical disk coronae but the relative roles of different acceleration mechanisms in a given reconnection environment are not well understood. While outflow fast mode shocks have been predicted analytically, we show for the first time via direct numerical simulations that such shocks do indeed occur in the outflows of fast reconnection when an obstacle is present. These shocks are distinct from the slow mode Petschek inflow shocks. If Fermi acceleration of electrons operates in the weak fast shocks, the associated compression ratios will induce a Fermi acceleration particle spectrum that is significantly steeper than strong fast shocks commonly studied, but consistent with the demands of solar flares. While this is not the only acceleration mechanism operating in a reconnection environment, it is plausibly a ubiquitous one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Combined NNBI and ICRH Heating in FAST H-mode plasmas

The combination of ICRH+NNBI in FAST allows the generation of fast ion populations with different velocity space anisotropy and radial profiles. These energetic ion populations can excite meso-scale fluctuations with the same characteristics of those expected in reactor conditions and, for this reason, FAST can address a number of important burning plasma physics issues. Numerical simulation and modeling of energetic particle physics are based on the use of transport codes that are iteratively coupled with a bi-dimensional full wave-quasi-linear solver for ICRH, in order to determinate the normalized supra-thermal population pressure ss{sub hot}. The value of ss{sub hot}. as well the energetic particle distribution functions can be used as initial condition for numerical simulation studies, investigating the destabilization and saturation of fast ion driven Alfvenic modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast-electron generation in long-scale-length plasmas

Long-scale-length ({approx}400-{mu}m) planar CH plasmas have been generated on OMEGA EP with laser intensities of the order of 10{sup 14} W/cm{sup 2} and {approx}1-mm focal spots to quantify the number and temperature of fast electrons caused by the two-plasmon-decay instability. The main diagnostics were the time-integrated K{sub {alpha}} line emission and the hard x-ray bremsstrahlung (HXR) from a molybdenum (Mo) substrate. For the intensity range of 1-7 x 10{sup 14} W/cm{sup 2}, the Mo K{sub {alpha}} and HXR energies increased by more than three orders of magnitude. The fast-electron temperature in this range (deduced from the x-ray bremsstrahlung emission) rose from {approx}20 keV to {approx}90 keV. A Monte Carlo code was used to estimate the total energy (or number) of fast electrons based on these two experimental signatures. The resulting energy in fast electrons as a fraction of the laser energy was found to rise in the same intensity range up to {approx}1%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast scanning mode and its realization in a scanning acoustic microscope

The scanning speed of the two-dimensional stage dominates the efficiency of mechanical scanning measurement systems. This paper focused on a detailed scanning time analysis of conventional raster and spiral scan modes and then proposed two fast alternative scanning modes. Performed on a self-developed scanning acoustic microscope (SAM), the measured images obtained by using the conventional scan mode and fast scan modes are compared. The total scanning time is reduced by 29% of the two proposed fast scan modes. It will offer a better solution for high speed scanning without sacrificing the system stability, and will not introduce additional difficulties to the configuration of scanning measurement systems. They can be easily applied to the mechanical scanning measuring systems with different driving actuators such as piezoelectric, linear motor, dc motor, and so on. The proposed fast raster and square spiral scan modes are realized in SAM, but not specially designed for it. Therefore, they have universal adaptability and can be applied to other scanning measurement systems with two-dimensional mechanical scanning stages, such as atomic force microscope or scanning tunneling microscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗