Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Scanning Kelvin-probe study of the hydrogen-terminated diamond surface in ultrahigh vacuum

Atomic-force and Kelvin-probe microscopies were employed in ultrahigh vacuum to image the surface topography and contact potential of the hydrogen-terminated and unterminated surfaces of diamond. A variation of about 25 meV in the contact potential was measured on a length scale of 20 nm and ascribed to differently orientated surface domains resulting from hydrogen-plasma processing of the sample. Shifts in the work function arising from sample heating in vacuum and the adsorption of C{sub 60} were measured. The Fermi level was found to be 0.7 and 1.1 eV below the valence band maximum for C{sub 60} coverages of 1 and 4 monolayer, respectively.

36 MATERIALS SCIENCE↗

Electronic and elemental properties of the Cu{sub 2}ZnSn(S,Se){sub 4} surface and grain boundaries

X-ray and femtosecond UV photoelectron spectroscopy, secondary ion mass spectrometry and photoluminescence imaging were used to investigate the electronic and elemental properties of the CZTS,Se surface and its oxides. Oxide removal reveals a very Cu poor and Zn rich surface relative to bulk composition. O and Na are observed at the surface and throughout the bulk. Upward bending of the valence bands indicates the presence of negative charge in the surface region and the Fermi level is found near the band gap center. The presence of point defects and the impact of these findings on grain boundary properties will be described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the work function of graphene by nitrogen plasma treatment with different radio-frequency powers

Graphene prepared by the chemical vapor deposition method was treated with nitrogen plasma under different radio-frequency (rf) power conditions in order to experimentally study the change in the work function. Control of the rf power could change the work function of graphene from 4.91 eV to 4.37 eV. It is shown that the increased rf power may lead to the increased number of graphitic nitrogen, increasing the electron concentration, and shifting the Fermi level to higher energy. The ability to controllably tune the work function of graphene is essential for optimizing the efficiency of optoelectronic and electronic devices.

36 MATERIALS SCIENCE↗

Electronic structure of Ba(Fe,Ru)2As2 and Sr(Fe,Ir)2As2 alloys

The electronic structures of Ba(Fe,Ru){sub 2}As{sub 2} and Sr(Fe,Ir){sub 2}As{sub 2} are investigated using density functional calculations. We find that these systems behave as coherent alloys from the electronic structure point of view. In particular, the isoelectronic substitution of Fe by Ru does not provide doping but rather suppresses the spin-density wave characteristic of the pure Fe compound by a reduction in the Stoner enhancement and an increase in the bandwidth due to hybridization involving Ru. The electronic structure near the Fermi level otherwise remains quite similar to that of BaFe{sub 2}As{sub 2}. The behavior of the Ir alloy is similar except that in this case there is additional electron doping.

36 MATERIALS SCIENCE↗

Temperature dependence of the intrinsic anomalous Hall effect in nickel

The unusual temperature dependence of the anomalous Hall effect (AHE) in Ni is investigated by an experimental approach which enables us to extract the intrinsic anomalous Hall conductivity over the whole temperature range. In stark contrast to the existing literature, the intrinsic contribution in Ni is found to be strongly temperature dependent between 5 and 150 K, where the corresponding magnetization remains almost unchanged. This pronounced temperature dependence, a cause of the long-standing confusion concerning the physical origin of the AHE in Ni, is likely due to the existence of small band gaps caused by the spin-orbit coupling at the Fermi level. Our result helps pave the way for the general claim of the Berry-phase interpretation for the AHE, and also points out another mechanism for the temperature dependence of the AHE.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-frequency K{sup {pi}}=0{sup +} modes in deformed neutron-rich nuclei: Pairing- and {beta}-vibrational modes of neutrons

Low-frequency K{sup {pi}}=0{sup +} states in deformed neutron-rich nuclei are investigated by means of the quasiparticle-random-phase approximation based on the Hartree-Fock-Bogoliubov formalism in the coordinate space. We have obtained the very strongly collective K{sup {pi}}=0{sup +} modes not only in neutron-rich Mg isotope but also in Cr and Fe isotopes in N=40 region, where the onset of nuclear deformation has been discussed. It is found that the spatially extended structure of neutron quasiparticle wave functions around the Fermi level brings about a striking enhancement of the transition strengths. It is also found that the fluctuation of the pairing field plays an important role in generating coherence among two-quasiparticle excitations of neutron.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Metal-insulator transition and its relation to magnetic structure in (LaMnO{sub 3}){sub 2n}/(SrMnO{sub 3}){sub n} superlattices.

Superlattices of (LaMnO{sub 3}){sub 2n}/(SrMnO{sub 3}){sub n} (1 {le} n {le} 5), composed of the gapped insulators LaMnO{sub 3} and SrMnO{sub 3}, undergo a metal-insulator transition as a function of n, being metallic for n {le} 2 and insulating for n {ge} 3. Measurements of transport, magnetization, and polarized neutron reflectivity reveal that the ferromagnetism is relatively uniform in the metallic state, and is strongly modulated in the insulating state, being high in LaMnO{sub 3} and suppressed in SrMnO{sub 3}. The modulation is consistent with a Mott transition driven by the proximity between the (LaMnO{sub 3})/(SrMnO{sub 3}) interfaces. The insulating state for n {ge} 3 obeys variable range hopping at low temperatures. We suggest that this is due to states at the Fermi level that emerge at the (LaMnO{sub 3})/(SrMnO{sub 3}) interfaces and are localized by disorder.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Donor doping of single-walled carbon nanotubes by filling of channels with silver

The channels of single-walled carbon nanotubes (SWNTs) are filled with metallic silver. The synthesized nanocomposites are studied by Raman spectroscopy and optical absorption spectroscopy, and these data indicate a substantial modification of the electronic structure of the nanotubes upon their filling. Moreover, X-ray photoelectron spectroscopy shows that the incorporation of the metal leads to a change in the work function of SWNTs due to the Fermi level upshift and to the transfer of an electron density from inserted nanoparticles to the nanotube walls. Thus, the filling of the channels with silver results in donor doping of the nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of annealing on the kinetic properties and band parameters of Hg{sub 1−x−y}Cd{sub x}Eu{sub y}Se semiconductor crystals

The results of studies of the kinetic properties of Hg{sub 1−x−y}Cd{sub x}Eu{sub y}Se semiconductor crystals in the ranges of temperatures T = 77–300 K and magnetic fields H = 0.5–5 kOe before and after heat treatment of the samples in Se vapors are reported. It is established that annealing of the samples in Se vapors induces a decrease in the electron concentration. From the concentration dependence of the electron effective mass at the Fermi level, the band gap, the matrix element of interband interaction, and the electron effective mass at the bottom of the conduction band are determined.

36 MATERIALS SCIENCE↗

Microwave Magnetoabsorption Oscillations in Fe-Doped HgSe Crystals

Magnetoresistance oscillations are considered in the case of microwave-radiation absorption in HgSe samples with a different Fe-impurity concentration. From the simultaneous analysis of the field and temperature dependences of the Shubnikov–de Haas oscillations, the effective mass, the Dingle temperature, and the quantum-limit field corresponding to the Fermi level are obtained. A method for analyzing the spectra with several oscillation frequencies, i.e., the beating effect, is proposed. The results are compared with data obtained by Hall measurements.

36 MATERIALS SCIENCE↗

The study of the structure of the electronic states of the FeGa{sub 3} and RuGa{sub 3} compounds by optical spectroscopy method

Investigations of the optical properties of intermetallic compounds FeGa{sub 3} and RuGa{sub 3} in the wavelength range of 0.22−14 μm have been conducted. The spectra of the interband light absorption are interpreted based on comparative analysis of calculated and experimental dispersion dependences of optical conductivity. Experimental data confirm the existence of the energy gaps at the Fermi level with a width of ~0.6 eV in the density of states of these materials, which was previously predicted in the band calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi Surface And Van Hove Singularities in the Itinerant Metamagnet Sr(3)Ru(2)O(7)

The low-energy electronic structure of the itinerant metamagnet Sr{sub 3}Ru{sub 2}O{sub 7} is investigated by angle-resolved photoemission and density-functional calculations. We find well-defined quasiparticle bands with resolution-limited linewidths and Fermi velocities up to an order of magnitude lower than in single layer Sr{sub 2}RuO{sub 4}. The complete topography, the cyclotron masses, and the orbital character of the Fermi surface are determined, in agreement with bulk sensitive de Haas-van Alphen measurements. An analysis of the d{sub xy} band dispersion reveals a complex density of states with van Hove singularities near the Fermi level, a situation which is favorable for magnetic instabilities.

43 PARTICLE ACCELERATORS↗

Gate-controlled ultraviolet photo-etching of graphene edges

The chemical reactivity of graphene under ultraviolet (UV) light irradiation is investigated under positive and negative gate electric fields. Graphene edges are selectively etched when negative gate voltages are applied while the reactivity is significantly suppressed for positive gate voltages. Oxygen adsorption onto graphene is significantly affected by the Fermi level of the final state achieved during previous electrical measurements. UV irradiation after negative-to-positive gate sweeps causes predominant oxygen desorption while UV irradiation after gate sweeps in the opposite direction causes etching of graphene edges.

36 MATERIALS SCIENCE↗

Stability and electronic properties of SiC nanowire adsorbed on MoS{sub 2} monolayer

Structural stability and electronic properties of silicon carbide (SiC) nano-wire on MoS{sub 2} monolayer are investigated within the framework of density functional theory (DFT). The preferred binding site for the SiC nano-wire is predicted to be hollow site of monolayer. In the electronic band structure the states in valence band near Fermi level are mainly due to nano-wire leading to reduction of band gap relative to monolayer. These results provide a platform for their applications in optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Schottky barrier modulation at PtSi/Si interface by strain and structural deformation

We show, using density functional theory (DFT) calculations, that the Schottky barrier height (SBH) at the PtSi/Si interface can be lowered by uniaxial strain applied not only on Si but also on PtSi. The strain was applied to the (001) direction of Si and PtSi, which is normal for the interface. The SBH of the hole is lowered by 0.08 eV under 2% of tensile strain on Si and by 0.09 eV under 4 % of compressive strain on PtSi. Because the SBH at PtSi/Si contact is approximately 0.2 eV, this amount of reduction can significantly lower the resistance of the PtSi/Si contact; thus applying uniaxial strain on both PtSi and Si possibly enhances the performance of Schottky barrier field effect transistors. Theoretical models of SB formation and conventional structure model are evaluated. It is found that Pt penetration into Si stabilizes the interface and lowers the SBH by approximately 0.1 eV from the bulk-terminated interface model, which implies that conventionally used bulk-terminated interface models have significant errors. Among the theoretical models of SB formation, the model of strong Fermi level pining adequately explains the electron transfer phenomena and SBH, but it has limited ability to explain SBH changes induced by changes of interface structure.

36 MATERIALS SCIENCE↗

Hybrid functional study of α-uranium

We have used the hybrid density functionals to study the structural and electronic properties of alpha-U. The fraction of exact Hartree Folk exchange used is varied from 0.0 to 0.6. The equilibrium volume is found to be underestimated and bulk modulus overestimated with HSE as compared to both calculated by PBE and the experimental values. Electronic bands below the Fermi level are found to shift to lower energy with respect to PBE electronic bands which itself gives the bands shifted to lower energies as compared to UPS experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of thermal annealing on the spin injection and spin detection through Fe/GaAs interfaces

A strong bias asymmetry of the spin-injection efficiency through an epitaxial Fe/GaAs Schottky tunnel contact is observed. Low-temperature post-growth thermal annealing is shown to strongly affect the spin-injection efficiency. The annealing leads either to a reduction or an enhancement. The spin accumulation is addressed electrically in a lateral spin-valve geometry using a non-local spin-valve setup at liquid helium temperatures. A spin-injection efficiency of up to 5.5% is estimated from experimental results. The electrical properties of the Schottky tunnel diode do not reflect the bias asymmetry and the changes in the spin-injection efficiency during annealing. Formation of spin-polarized interface states (IS) close to the Fermi-level is a possible explanation. The IS will not only radically affect the spin-injection but also the spin-detection process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗