Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Computer modelling of the reduction of rare earth dopants in barium aluminate

Long lasting phosphorescence in barium aluminates can be achieved by doping with rare earth ions in divalent charge states. The rare earth ions are initially in a trivalent charge state, but are reduced to a divalent charge state before being doped into the material. In this paper, the reduction of trivalent rare earth ions in the BaAl{sub 2}O{sub 4} lattice is studied by computer simulation, with the energetics of the whole reduction and doping process being modelled by two methods, one based on single ion doping and one which allows dopant concentrations to be taken into account. A range of different reduction schemes are considered and the most energetically favourable schemes identified. - Graphical abstract: The doping and subsequent reduction of a rare earth ion into the barium aluminate lattice. Highlights: > The doping of barium aluminate with rare earth ions reduced in a range of atmospheres has been modelled. > The overall solution energy for the doping process for each ion in each reducing atmosphere is calculated using two methods. > The lowest energy reduction process is predicted and compared with experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the interoperability of remote GPGPU virtualization using rCUDA and directive-based programming models

Directive-based programming models, such as OpenMP, OpenACC, and OmpSs, enable users to accelerate applications by using coprocessors with little effort. These devices offer significant computing power, but their use can introduce two problems: an increase in the total cost of ownership and their underutilization because not all codes match their architecture. Remote accelerator virtualization frameworks address those problems. In particular, rCUDA provides transparent access to any graphic processor unit installed in a cluster, reducing the number of accelerators and increasing their utilization ratio. Joining these two technologies, directive-based programming models and rCUDA, is thus highly appealing. In this work, we study the integration of OmpSs and OpenACC with rCUDA, describing and analyzing several applications over three different hardware configurations that include two InfiniBand interconnections and three NVIDIA accelerators. Our evaluation reveals favorable performance results, showing low overhead and similar scaling factors when using remote accelerators instead of local devices.

97 MATHEMATICS AND COMPUTING↗

AMR-Wind: A Performance-Portable, High-Fidelity Flow Solver for Wind Farm Simulations

We present AMR-Wind, a verified and validated high-fidelity computational-fluid-dynamics code for wind farm flows. AMR-Wind is a block-structured, adaptive-mesh, incompressible-flow solver that enables predictive simulations of the atmospheric boundary layer and wind plants. It is a highly scalable code designed for parallel high-performance computing with a specific focus on performance portability for current and future computing architectures, including graphical processing units (GPUs). In this paper, we detail the governing equations, the numerical methods, and the turbine models. Establishing a foundation for the correctness of the code, we present the results of formal verification and validation. The verification studies, which include a novel actuator line test case, indicate that AMR-Wind is spatially and temporally second-order accurate. The validation studies demonstrate that the key physics capabilities implemented in the code, including actuator disk models, actuator line models, turbulence models, and large eddy simulation (LES) models for atmospheric boundary layers, perform well in comparison to reference data from established computational tools and theory. We conclude with a demonstration simulation of a 12-turbine wind farm operating in a turbulent atmospheric boundary layer, detailing computational performance and realistic wake interactions.

17 WIND ENERGY↗

Measurement of the cross section of top quark-antiquark pair production in association with a W boson in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

The production of a top quark-antiquark pair in association with a W boson ($ \textrm{t}\overline{\textrm{t}}\textrm{W} $) is measured in proton-proton collisions at a center-of-mass energy of 13 TeV. The analyzed data was recorded by the CMS experiment at the CERN LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. Events with two or three leptons (electrons and muons) and additional jets are selected. In events with two leptons, a multiclass neural network is used to distinguish between the signal and background processes. Events with three leptons are categorized based on the number of jets and of jets originating from b quark hadronization, and the lepton charges. The inclusive $ \textrm{t}\overline{\textrm{t}}\textrm{W} $ production cross section in the full phase space is measured to be 868 ± 40(stat) ± 51(syst) fb. The $ \textrm{t}\overline{\textrm{t}}\textrm{W} ^{+}$ and $ \textrm{t}\overline{\textrm{t}}\textrm{W} ^{−}$ cross sections are also measured as 553 ± 30(stat) ± 30(syst) and 343 ± 26(stat) ± 25(syst) fb, respectively, and the corresponding ratio of the two cross sections is found to be $ 1.61\pm 0.15{\left(\textrm{stat}\right)}_{-0.05}^{+0.07}\left(\textrm{syst}\right) $. The measured cross sections are larger than but consistent with the standard model predictions within two standard deviations, and represent the most precise measurement of these cross sections to date.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Water solubility in calcium aluminosilicate glasses investigated by first principles techniques

First-principles techniques have been employed to study the reactivity of water into a calcium aluminosilicate glass. In addition to the well known hydrolysis reactions Si-O-Si+H{sub 2}O{yields}Si-OH+Si-OH and Si-O-Al+H{sub 2}O{yields}Si-OH+Al-OH, a peculiar mechanism is found, leading to the formation of an AlO{sub 3}-H{sub 2}O entity and the breaking of Al-O-Si bond. In the glass bulk, most of the hydrolysis reactions are endothermic. Only a few regular sites are found reactive (i.e. in association with an exothermic reaction), and in that case, the hydrolysis reaction leads to a decrease of the local disorder in the amorphous vitreous network. Afterwards, we suggest that ionic charge compensators transform into network modifiers when hydrolysis occurs, according to a global process firstly suggested by Burnham in 1975. Our theoretical computations provide a more general model of the first hydrolysis steps that could help to understand experimental data and water speciation in glasses. -- Graphical Abstract: Reactivity within glass bulk: structures obtained after hydrolyses reactions (endothermic and exothermic processes) and mechanisms involving Si-OH, Al-OH, Si-OH-Al groups within aluminosilicates glasses (through ab initio molecular dynamics): formation of the Si-OH-Al entity coupled with an H exchange-Frederic Bouyer and Gregory Geneste. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multifunctional properties of CoNi alloy embedded in the SiO{sub 2} host: Role of interparticle interaction

Nanocrystalline CoNi alloy is synthesized using sol-gel technique having average size {approx}8.5 and {approx}12nm. High-resolution transmission electron microscopy confirms absence of any oxide phase at the grain boundary. We observe multifunctionality ascribed to large loop shift after the field-cooling and saturation magnetization (M{sub S}) depending on interparticle interaction in CoNi alloy embedded in SiO{sub 2} matrix. A large loop shift 1.2 kOe is noticed at 5 K for 10.5% volume fraction ({phi}). The loop shift decreases with increasing temperature and vanishes around {approx}210K where a maximum is observed in zero-field-cooled magnetization. The loop shift decreases with decreasing {phi} and vanishes at {phi}=0.01%. Interestingly, M{sub S} increases with decreasing {phi} and value at {phi}=0.01% approaches to the calculated value of M{sub S} for the bulk counterpart. A model has been proposed with ferromagnetic-core and disordered magnetic-shell structure to interpret the results. - Graphical abstract: Plot of loop shift (left axis) and saturation magnetization (right axis) with volume fraction ({phi}). Inset: loop shift after field-cooling with 50 kOe field and no shift after zero-field-cooling. Highlights: > Strong exchange bias (EB) effect is observed for 10.5% volume fraction. > EB decreases with decreasing volume fraction ({phi}) and vanishes at {phi}=0.01%. > In contrast, saturation magnetization increases with decreasing volume fraction. > Saturation magnetization (M{sub S}) approaches to bulk value at 0.01% volume fraction. > Large EB and M{sub S} at different {phi} are appealing for multifunctional applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of structural, elastic, electronic and optical properties of seven SrZrO{sub 3} phases: First-principles calculations

On the plane-wave ultrasoft pseudopotential technique based on the first-principles density functional theory (DFT), we calculated the structural, elastic, electronic and optical properties of the seven different phases of SrZrO{sub 3}. The obtained ground-state properties are in good agreement with previous experiments and calculations, which indicate that the most stable phase is orthorhombic Pnma structure. Seven phases of SrZrO{sub 3} are mechanically stable with cubic, tetragonal and orthorhombic structures. The mechanical and thermodynamic properties have been obtained by using the Voigt-Reuss-Hill approach and Debye-Grueneisen model. The electronic structures and optical properties are obtained and compared with the available experimental and theoretical data. - Graphical abstract: Energy versus volume of seven phases SrZrO{sub 3} shows the Pnma phase has the minimum ground-state energy. Highlights: Black-Right-Pointing-Pointer We calculated the physical and chemical properties of seven SrZrO{sub 3} polymorphs. Black-Right-Pointing-Pointer The order of stability is Pnma>Imma>Cmcm>I4/mcm>P4/mbm>P4mm>Pm3-bar m. Black-Right-Pointing-Pointer The most stable phase is orthorhombic Pnma structure. Black-Right-Pointing-Pointer Seven phases of SrZrO{sub 3} are mechanically stable. Black-Right-Pointing-Pointer The relationship between n and {rho}{sub m} is n=1+0.18{rho}{sub m}.

36 MATERIALS SCIENCE↗

Crystal structure and properties of high-pressure-synthesized BiRhO{sub 3}, LuRhO{sub 3}, and NdRhO{sub 3}

GdFeO{sub 3}-type orthorhombic perovskite compounds BiRhO{sub 3}, LuRhO{sub 3}, and NdRhO{sub 3} were prepared using a high-pressure and high-temperature technique at 6 GPa and 1300–1600 K. Their crystal structures were investigated using synchrotron X-ray powder diffraction data: a=5.8098(3) Å, b=7.7720(4) Å, and c=5.3510(3) Å for BiRhO{sub 3}; a=5.75519(1) Å, b=7.77218(2) Å, and c=5.37572(1) Å for NdRhO{sub 3}, and a=5.66981(1) Å, b=7.51205(2) Å, and c=5.18520(1) Å for LuRhO{sub 3}. BiRhO{sub 3} crystallizes in the centrosymmetric space group Pnma (No. 62) similar to LuRhO{sub 3} and NdRhO{sub 3} despite the presence of the lone electron pair of Bi{sup 3+} and the non-magnetic ground state of Rh{sup 3+}. BiRhO{sub 3} and LuRhO{sub 3} are non-magnetic, and NdRhO{sub 3} shows paramagnetic behavior from Nd{sup 3+} ions. The specific heat of BiRhO{sub 3}, LuRhO{sub 3}, and NdRhO{sub 3} in different applied magnetic fields was also investigated. An energy gap of BiRhO{sub 3} was estimated to be about 1.3 eV from diffuse reflectance spectra and 0.95 eV from first-principle calculations with U=3.5 eV. - Graphical abstract: A fragment of the crystal structure of BiRhO{sub 3} in the Pnma (along b axis) model, 2×2×2 unit cell. The RhO{sub 6} octahedra are shown in gray. The Bi atoms are shown by big black circles. Highlights: ► BiRhO{sub 3}, LuRhO{sub 3}, and NdRhO{sub 3} were prepared using a high-pressure technique. ► Structure of three compounds was determined: centrosymmetric space group Pnma. ► BiRhO{sub 3} and LuRhO{sub 3} are non-magnetic, and NdRhO{sub 3} shows paramagnetic behavior. ► Specific heat of BiRhO{sub 3}, LuRhO{sub 3}, and NdRhO{sub 3} was investigated. ► BiRhO{sub 3} has an energy gap of about 1.3 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of lithium doping level on the structural, electrical properties of Li{sup +}-doped BPO{sub 4} solid electrolyte

Graphical abstract: - Highlights: • Better ionic conductivities when 0.05 ≤ x ≤ 0.13. • V{sup ‴}{sub B}+3Li{sub i} model was preferred. • Grain size, lattice strain and Li{sup +}conductivity are closely related. - Abstract: A series of lithium ion conducting solid electrolytes Li{sub x}B{sub 1−x/3}PO{sub 4}(x = 0.01, 0.05, 0.09, 0.13, 0.17, 0.20) is synthesized by a soft-chemistry route. FTIR and XRD measurements reveal that the electrolyte is pure phase of tetragonal structure. AC-impedance spectroscopy (AC-IS) at room temperature shows that Li{sub x}B{sub 1−x/3}PO{sub 4} exhibits higher ionic conductivities in the range 0.05 ≤ x ≤ 0.13, beyond which, the ionic conductivities decrease quickly. Maximum ionic conductivity of the Li{sub x}B{sub 1−x/3}PO{sub 4} reaches 3.35 × 10{sup −5} S cm{sup −1} at room temperature for x = 0.05. Direct current polarizing (DCP) measurement indicates that the decomposition voltage for the solid electrolyte reaches up to 3.7 V. Micro-structure parameters of synthesized Li{sub x}B{sub 1−x/3}PO{sub 4} samples are calculated by Rietveld refinement of X-ray diffraction spectra. The unit-cell parameters, lattice strain, crystal grain size and ionic conductivities of the samples are correlated with the lithium ion doping level x.

36 MATERIALS SCIENCE↗

Anisotropic thermal expansion and anharmonic phonon behavior of mullite-type Bi{sub 2}Ga{sub 4}O{sub 9}

Graphical abstract: - Highlights: • Anisotropic lattice thermal expansion of Bi{sub 2}Ga{sub 4}O{sub 9} was modeled using extended Grüneisen first-order approximation. • The model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy. • Temperature dependent Raman frequency shift and line-width was analyzed using symmetric phonon decay channel. - Abstract: We report the lattice thermal expansion and the temperature-dependent phonon behavior of the mullite-type Bi{sub 2}Ga{sub 4}O{sub 9} complex oxide. The thermal expansion was studied using composite data collected from powder and single crystal X-ray diffraction between 100 K and 1273 K. The lattice expansion occurred in the order of a < c < b. The anisotropic expansion behavior was monitored with respect to thermal expansion coefficients and the anisotropy factor. The volume thermal expansion was expressed using an extended Grüneisen first-order approximation to the zero-pressure equation of state; the model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy as a function of temperature. The temperature dependent Raman spectra were collected from a single crystal between 78 K and 1273 K. The shift of the frequencies and the broadening of the line-widths with increasing temperature helped to analyze the anharmonicity and the thermal behavior of some phonons.

36 MATERIALS SCIENCE↗

Comment on 'The effects of Bohm potential on ion-acoustic solitary waves interaction in a nonplanar quantum plasma' [Phys. Plasmas 17, 082307 (2010)]

Recently, Li [Phys. Plasmas 17, 082307 (2010)] has studied the effects of Bohm potential on interaction of nonplanar ion-acoustic solitary waves in an unmagnetized electron-positron-ion quantum plasma. In his work the extended reductive perturbation technique has been employed to reduce the basic quantum hydrodynamics plasma equations to Korteweg-de Vries evolution equations (one for each wave) as well as other coupled differential equations describing the phase variation of the resulting solitary waves. The calculated collisional phase-shifts are then numerically evaluated in terms of plasma parameters such as the fractional positron to ion number-density p, relative electron to positron Fermi-temperature {sigma} and the quantum diffraction parameter H. We show that in the chosen plasma model, the parameters p and {sigma} are not independent quantum plasma parameters which has important consequences on the graphical interpretations presented in the mentioned article.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GronOR: Massively Parallel and GPU-Accelerated Non-Orthogonal Configuration Interaction for Large Molecular Systems

GronOR is a program package for non-orthogonal configuration interaction calculations for an electronic wave function built in terms of anti-symmetrized products of multi-configuration molecular fragment wave functions. The two-electron integrals that have to be processed may be expressed in terms of atomic orbitals or in terms of an orbital basis determined from the molecular orbitals of the fragments. The code has been specifically designed for execution on distributed memory massively parallel and Graphics Processing Unit (GPU)-accelerated computer architectures, using an MPI+OpenACC/OpenMP programming approach. The task-based execution model used in the implementation allows for linear scaling with the number of nodes on the largest pre-exascale architectures available, provides hardware fault resiliency, and enables effective execution on systems with distinct central processing unit-only and GPU-accelerated partitions. The code interfaces with existing multi-configuration electronic structure codes that provide optimized molecular fragment orbitals, configuration interaction coefficients, and the required integrals. Algorithm and implementation details, parallel and accelerated performance benchmarks, and an analysis of the sensitivity of the accuracy of results and computational performance to thresholds used in the calculations are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geometric GNNs for charged particle tracking at GlueX

Nuclear physics experiments are aimed at uncovering the fundamental building blocks of matter. The experiments involve high-energy collisions that produce complex events with many particle trajectories. Tracking charged particles resulting from collisions in the presence of a strong magnetic field is critical to enable the reconstruction of particle trajectories and precise determination of interactions. It is traditionally achieved through combinatorial approaches that scale worse than linearly as the number of hits grows. Since particle hit data naturally form a point cloud and can be structured as graphs, graph neural networks (GNNs) emerge as an intuitive and effective choice for this task. In this study, we evaluate the GNN model for track finding on the data from the GlueX experiment at Jefferson Lab. We use simulation data to train the model and test on both simulation and real GlueX measurements. We demonstrate that GNN-based track finding outperforms the currently used traditional method at GlueX in terms of segment-based efficiency at a fixed purity while providing faster inferences. We show that the GNN model can achieve significant speedup by processing multiple events in batches, which exploits the parallel computation capability of graphical processing units (GPUs). Finally, we compare the GNN implementation on GPU and field-programmable gate array and describe the trade-off.

batched GNN pipeline↗

Assessing the Impact of Corneal Refraction and Iris Tissue Non-planarity on Iris Recognition

Assumptions regarding eye morphology are implicit in iris recognition algorithms. The cornea is assumed to have little to no effect on the view of the iris texture when the eye gaze is non-frontal, the iris is assumed flat, and the eye is assumed to be imaged via an orthographic projection. If these assumptions hold, affine transformations may be used to rectify non-frontally posed images to a frontal view and the rubber sheet model may be accurately used to normalize the iris annulus to a rectangular image. This work examines how iris recognition performance degrades when the first two assumptions are violated. Using a computer renderable eye model, a data set is created varying the presence of the cornea and a parameterized non-planarity of the iris shape across a large range of eye gaze angles. Matching scores are created using a commercial matcher. Thus, when comparing the relative impact of each assumption violation, it is observed that iris non-planarity presents a more significant problem than corneal refractive distortion with regard to iris recognition accuracy in non-frontal images.

59 BASIC BIOLOGICAL SCIENCES↗

Revision of the APGEMS Dose Conversion Factor File Using Revised Factors from Federal Guidance Report 12 and 13

The Air Pollutant Graphical Environmental Monitoring System (APGEMS) is used by the Hanford Emergency Operation Center (EOC) to provide refined plume modeling of releases involving radionuclides. The dose conversion factors (DCFs) used by APGEMS to convert air concentration to dose are stored in a file called HUDUFACT.dat; the DCFs are based primarily on ICRP 30 compiled in the late 1980’s. This report updates the DCFs using more recent values reported in the Environmental Protection Agencies (EPAs) Federal Guidance Report (FGR) 12 and 13. FGR 12 provides external exposure (air submersion) DCFs for radionuclides in air; FGR 13 provides DCFs for radionuclides from inhalation. DCFs were updated for only those radionuclides listed in the original HUDUFACT.dat file. Since FGR 13 provides inhalation dose conversion factors as a function of age, revised DCF files were created for APGEMS for each age group. The “adult” DCF file is the most relevant to compare to the original DCF file being used in APGEMS; these DCF values are compared in this report.

APGEMS↗

29 th International Training Course on the Physical Protection of Nuclear Materials and Nuclear Facilities (Project Summary)

Sandia National Laboratories (Sandia) has hosted the International Training Course on the Physical Protection of Nuclear Materials and Nuclear Facilities since 1978. This course is the flagship training course of the International Atomic Energy Agency (IAEA). On behalf of the National Nuclear Security Administration (NNSA), Sandia manages, develops, and coordinates all course materials, and works closely with the IAEA to arrange all logistical details for the course ITC-29 incorporated some updates to the facility models, based on feedback received in ITC-28 and the ITC-29 dry run. In addition, all the graphics were refreshed after ITC-28 and implemented in the posters, data handbooks, etc. As in ITC-28, the ITC-29 staff worked closely with the IAEA on course materials, including a peer review process to ensure all course materials were aligned with Nuclear Security Series No. 13 and other relevant international guidance documentation from the IAEA. Due to the COVID-19 pandemic, ITC-29 was postponed twice and eventually took place in the late summer/early fall of 2022. Due to ongoing COVID-19 restrictions and safety requirements, the number of participants was reduced by about 31 percent from 59 participants in ITC-28 to 41 in ITC-29. As a result, the number of subgroups also decreased from eight in ITC-28 to six for ITC-29. This enabled the Sandia team to implement more opportunities for social distancing, particularly in the large classrooms. Despite the challenges, ITC-29 still passed a significant milestone, with the one-thousandth participant of the international training course attending during this event. Finally, the ITC staff continued the use of its improved method of evaluation to capture participants’ satisfaction with the updated course and to gather feedback concerning future improvements. This document provides a brief description of ITC-29, including a summary of lessons learned and key recommendations for future development efforts.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Evaluating performance and portability of high-level programming models: Julia, Python/Numba, and Kokkos on exascale nodes

We explore the performance and portability of the high-level programming models: the LLVM-based Julia and Python/Numba, and Kokkos on high-performance computing (HPC) nodes: AMD Epyc CPUs and MI250X graphical processing units (GPUs) on Frontier’s test bed Crusher system and Ampere’s Arm-based CPUs and NVIDIA’s A100 GPUs on the Wombat system at the Oak Ridge Leadership Computing Facilities. We compare the default performance of a hand-rolled dense matrix multiplication algorithm on CPUs against vendor-compiled C/OpenMP implementations, and on each GPU against CUDA and HIP. Rather than focusing on the kernel optimization per-se, we select this naive approach to resemble exploratory work in science and as a lower-bound for performance to isolate the effect of each programming model. Julia and Kokkos perform comparably with C/OpenMP on CPUs, while Julia implementations are competitive with CUDA and HIP on GPUs. Performance gaps are identified on NVIDIA A100 GPUs for Julia’s single precision and Kokkos, and for Python/Numba in all scenarios. We also comment on half-precision support, productivity, performance portability metrics, and platform readiness. We expect to contribute to the understanding and direction for high-level, high-productivity languages in HPC as the first-generation exascale systems are deployed.

Godoy, William↗

When not to use machine learning: A perspective on potential and limitations

Abstract The unparalleled success of artificial intelligence (AI) in the technology sector has catalyzed an enormous amount of research in the scientific community. It has proven to be a powerful tool, but as with any rapidly developing field, the deluge of information can be overwhelming, confusing, and sometimes misleading. This can make it easy to become lost in the same hype cycles that have historically ended in the periods of scarce funding and depleted expectations known as AI winters. Furthermore, although the importance of innovative, high-risk research cannot be overstated, it is also imperative to understand the fundamental limits of available techniques, especially in young fields where the rules appear to be constantly rewritten and as the likelihood of application to high-stakes scenarios increases. In this article, we highlight the guiding principles of data-driven modeling, how these principles imbue models with almost magical predictive power, and how they also impose limitations on the scope of problems they can address. Particularly, understanding when not to use data-driven techniques, such as machine learning, is not something commonly explored, but is just as important as knowing how to apply the techniques properly. We hope that the discussion to follow provides researchers throughout the sciences with a better understanding of when said techniques are appropriate, the pitfalls to watch for, and most importantly, the confidence to leverage the power they can provide. Graphical abstract

36 MATERIALS SCIENCE↗