Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

On the relationship between non-stoichiometry and passivity breakdown in ultra-thin oxides: combined depth-dependent spectroscopy, Mott-Schottky analysis and molecular dynamics simulation studies

Understanding the relationship between non-stoichiometry and physical properties of ultra-thin oxides is of great importance from both scientific and technological aspects. A specific example includes the onset of passivity breakdown in an ultra-thin oxide film in aqueous medium leading to the onset of corrosion. In this work, using the model system of ultra-thin oxide of alumina on aluminum synthesized by natural oxidation and photon-assisted oxidation processes; we demonstrate a direct correlation between passivity and quality of the oxide film quantitatively. Depth-dependent high resolution X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and nuclear reaction analysis (NRA) have been performed to characterize the physical and chemical properties of the oxide films, while detailed impedance measurements and Mott-Schottky studies have been performed to understand electronic transport. Combined NRA and TEM analysis reveal an 18% increase in oxygen density (for oxide films with near identical thicknesses ~3.8nm) in case of photon-assisted oxidation. The denser oxide film results in a ~34% more blockage of chloride ions transport as indicated by XPS analysis. Mott Schottky measurements on these oxide films indicates a 43% reduction of defect levels for UV-synthesized alumina when compared to native one, suggestive of chloride ion transport via oxygen vacancies. Additionally, molecular dynamics simulations have been performed to provide insights into the structure of the oxides at the atomic level to correlate with the experimental measurements. These simulations employ dynamic charge transfer between atoms and are used to investigate nanoscale oxides grown on Al (100) surfaces due to atomic and molecular oxygen. Oxidation using molecular and atomic oxygen resulted in an amorphous oxide scale with self limiting thickness of ~ 16 and 22 Å, respectively at 300 K. Structural and dynamic correlations indicate significant charge transfer to exist in the oxide film in both the cases. The oxide growth in both the cases occurs due to the inward oxygen and outward cation diffusion. The calculated in-plane and out-of-plane atomic diffusivities are 40-70% higher in case of atomic oxidation. In the presence of atomic oxygen, the O/Al ratio is more uniform and varies from 1.37 at the oxide-gas interface to 1.30 at metal-oxide interface whereas that formed by natural oxidation was sub-stoichiometric and oxygen deficient with O/Al values varying from 1.27 (oxide-gas interface) to 1.05 (metal-oxide interface) at room temperature. The simulation results are consistent with the reported experimental investigations.

36 MATERIALS SCIENCE↗

Atomic Oxygen Environment, Effects and Simulation

Atomic oxygen is the most predominant constituent in the low Earth orbital environment between the altitudes of 180 and 650 km. It is also a major constituent of the Mars orbital environment. It is very chemically reactive and can oxidize materials on the outside of spacecraft. In many cases the reaction products are volatile which can lead to mechanical failure. Stable oxides can also form that change the optical or thermal properties of the material. The importance of understanding atomic oxygen reactions with materials has led to both flight experiments in low Earth orbit and ground-based testing in vacuum chambers containing atomic oxygen to study its’ effect on materials. This presentation will focus on defining atomic oxygen environments, discussing atomic oxygen effects on spacecraft materials, reviewing some methods of atomic oxygen simulation, and discussing differences in ground-based testing and space testing as well as synergistic effects.

atomic oxygen, space environment, ground-based tes↗

Effect of Material of Metal Sublayer and Deposition Configuration on the Texture Formation in the Piezoactive ZnO Films

Effect of material of metal sublayer (aluminum, vanadium, chromium, iron, cobalt, nickel, and copper) and deposition configuration on the formation of the oblique and straight texture in the ZnO films is studied. The films that are synthesized in a dc magnetron sputtering system. It is shown that the piezoactive ZnO films with oblique texture that can generate shear waves are formed on the Cr and V metal sublayers in the shifted deposition configuration when the substrate is shifted relative to the magnetron axis toward the region of the target erosion. The piezoactive ZnO films with the straight structure that can generate longitudinal waves are formed on a chemically pure Al sublayer in the symmetric deposition configuration when the substrate is centered with respect to the target. Changes of the sublayer material in both deposition configurations or preliminary oxidation of the sublayer lead to the formation of the piezoactive ZnO films with mixed texture that excite shear and longitudinal waves. Chemical etching is used to show that the ZnO films with the oblique and straight textures exhibit piezoactive properties and can generate hypersound at thicknesses of no less than about 0.3 and about 0.9 μm, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of static local distortions vs. dynamic motions on the stability and band gaps of cubic oxide and halide perovskites

Ternary ABX 3 perovskites made of corner-sharing BX 6 octahedra have long featured prominently in solid-state chemistry and condensed matter physics. Still, the joint understanding of their two main subgroups—halides and oxides—has not been fully developed. Indeed, unlike the case in simpler compounds having a single, robust repeated motif (“monomorphous”), certain cubic perovskites can manifest a non-thermal (= intrinsic) distribution of local motifs (“polymorphous networks”). Such static deformations can include positional degrees of freedom (e.g., atomic displacements and octahedral tilting) or magnetic moment degrees of freedom in paramagnets. Unlike thermal motion, such static distortions do not time-average to zero, being an expression of the intrinsic symmetry breaking preference of the chemical bonding. Here, the present study compares electronic structure features of oxide and halide perovskites starting from the static polymorphous distribution of motifs described by Density Functional Theory (DFT) minimization of the internal energy, continuing to finite temperature thermal disorder modeled via finite temperature DFT molecular dynamics. We find that (i) different oxide vs. halide ABX 3 compounds adopt different energy-lowering symmetry-breaking modes. The calculated pair distribution function (PDF) of SrTiO 3 from the first-principles agrees with recently measured PDF. (ii) In both oxides and halides, such static distortions lead to band gap blueshifts with respect to undistorted cubic Pm-3m structure. (iii) For oxide perovskites, high-temperature molecular dynamics simulations initiated from the statically distorted polymorphous structures reveal that the thermally-induced distortions can lead to a band gap redshift. (iv) In contrast, for cubic halide perovskite CsPbI 3 , both the intrinsic distortions and the thermal distortions contribute in tandem to band gap blueshift, the former, intrinsic effect being dominant. (v) In the oxide SrTiO 3 and CaTiO 3 (but not in halide) perovskites, octahedral tilting leads to the emergence of a distinct Γ–Γ direct band gap component as a secondary valley minimum to the well-known indirect R–Γ gap. Understanding such intrinsic vs. thermal effects on oxide vs. halide perovskites holds the potential for designing target electronic properties.

36 MATERIALS SCIENCE↗

Knockdown of a laccase in Populus deltoides confers altered cell wall chemistry and increased sugar release

Summary Plant laccases are thought to function in the oxidation of monolignols which leads to higher order lignin formation. Only a hand‐full of laccases in plants have been functionally evaluated, and as such little is known about the breadth of their impact on cell wall chemistry or structure. Here, we describe a previously uncharacterized laccase from Populus , encoded by locus Potri.008G064000, whose reduced expression resulted in transgenic Populus trees with changes in syringyl/guaiacyl ratios as well as altered sugar release phenotypes. These phenotypes are consistent with plant biomass exhibiting reduced recalcitrance. Interestingly, the transgene effect on recalcitrance is dependent on a mild pretreatment prior to chemical extraction of sugars. Metabolite profiling suggests the transgene modulates phenolics that are associated with the cell wall structure. We propose that this particular laccase has a range of functions related to oxidation of phenolics and conjugation of flavonoids that interact with lignin in the cell wall.

09 BIOMASS FUELS↗

Steam‐Assisted Selective CO 2 Hydrogenation to Ethanol over Ru−In Catalysts

Abstract Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. We here unveil how reducibility and mobility of indium oxide species in Ru‐based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru−In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

Zhou, Chengshuang↗

Steam-Assisted Selective CO 2 Hydrogenation to Ethanol over Ru–In Catalysts

Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. In this work, we unveil how reducibility and mobility of indium oxide species in Ru-based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru–In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Report: Stability and Novel Properties of Magnetic Materials and Ferromagnet / Insulator Interfaces

We report investigations of the synthesis, structure, and properties of new materials for spintronic applications integrated onto silicon substrates. Our primary focus is materials with very high, negative, intrinsic spin polarization of the density of states at the Fermi level. We have developed a new synthesis method for Fe 3 O 4 thin films through selective oxidation of Fe, resulting in smooth, low-defect density films. We have synthesized Fe4N films and shown that they preferentially oxidize to Fe 3 O 4 . When integrated into magnetic tunnel junctions consisting of Fe4N / AlOx / Fe, oxidation at the Fe4N / AlOx interface creates Fe 3 O 4 , leading to negative tunneling magnetoresistance (TMR). Oxidation of Fe in nominally symmetric CoFe / AlOx / CoFe also produces Fe 3 O 4 and negative TMR under selected oxidation conditions.

36 MATERIALS SCIENCE↗

An Ordered Ni 6 ‐Ring Superstructure Enables a Highly Stable Sodium Oxide Cathode

Abstract Sodium‐based layered oxides are among the leading cathode candidates for sodium‐ion batteries, toward potential grid energy storage, having large specific capacity, good ionic conductivity, and feasible synthesis. Despite their excellent prospects, the performance of layered intercalation materials is affected by both a phase transition induced by the gliding of the transition metal slabs and air‐exposure degradation within the Na layers. Here, this problem is significantly mitigated by selecting two ions with very different MO bond energies to construct a highly ordered Ni 6 ‐ring superstructure within the transition metal layers in a model compound (NaNi 2/3 Sb 1/3 O 2 ). By virtue of substitution of 1/3 nickel with antimony in NaNiO 2 , the existence of these ordered Ni 6 ‐rings with super‐exchange interaction to form a symmetric atomic configuration and degenerate electronic orbital in layered oxides can not only largely enhance their air stability and thermal stability, but also increase the redox potential and simplify the phase‐transition process during battery cycling. The findings reveal that the ordered Ni 6 ‐ring superstructure is beneficial for constructing highly stable layered cathodes and calls for new paradigms for better design of layered materials.

Wang, Peng‐Fei↗

Phase and valence transitions in Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}}

The structures of compounds in the perovskite series Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}} (Ln=Pr and Tb and x=0, 0.1, 0.2, ..., 1.0) have been examined using synchrotron X-ray and neutron diffraction. It was found that niobate members of both series feature full B-site cation ordering but that this order is lost with increasing x. X-ray absorption near-edge structure (XANES) and near-infrared spectroscopies indicate that the oxidation state of the lanthanide cations gradually changes from Ln{sup 3+} to Ln{sup 4+} with increased Sn{sup 4+} doping. This is believed to be the cause of the loss of B-site ordering. Least squares analysis of the XANES spectra suggests that the rate of the transformation of Ln{sup 3+} cations to the tetravalent state is such that the Pr series contains no oxygen vacancies while the Tb series may contain a very small amount of vacancies, with {delta}{approx}0.02. - Graphical abstract: The series Ba{sub 2}LnSn{sub x}Nb{sub 1-x}O{sub 6-{delta}} (Ln=Pr and Tb) has been investigated using powder diffraction and spectroscopic techniques. Similarly to the analogous Sb{sup 5+} containing compounds it was found that Sn{sup 4+} doping leads to the gradual oxidation of the Ln{sup 3+} cations to the Ln{sup 4+} state. Quantitative analysis of the Ln L{sub III}-edge absorption spectra indicates that few or no oxygen vacancies are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation and Ripening of Self-Assembled Multilayers from the Vapor-Phase Deposition of Dodecanethiol on Copper Oxide

Here, the vapor-phase reaction of dodecanethiol (DDT) with copper oxide surfaces and the molecular level composition and structure of the resulting films were examined. Atomic force microscopy, cross-sectional transmission electron microscopy, and electron energy loss/electron dispersive spectroscopy reveal that, instead of forming self-assembled monolayers, DDT etches CuO surfaces to create ~8 nm thick Cu-thiolate multilayers. These layers are composed of surprisingly well-ordered crystallites, oriented either parallel or perpendicular to the substrate surface. Pre-etching of the CuO to expose the underlaying copper metal is shown to prevent the formation of multilayers and instead allow for the formation of the expected monolayers. Water contact angle and Fourier transform infrared spectroscopy are further shown to be ineffective at distinguishing the multilayer and monolayer thiol films. Interestingly, the multilayer films are unstable in air, ripening into particles 20 μm wide and several hundred nanometers tall over the course of a week. Air exposure also leads to the slow oxidation of the sulfur and copper within the films at a rate similar to what has been seen before for DDT monolayers. As a result, the multilayers show no significant improvement over monolayers in the prevention of oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of advanced diesel combustion operation on soot nanostructure and reactivity

Advanced diesel combustion, accomplished via a single pulse fuel injection and high levels of exhaust gas recirculation, is shown to be a path to reduce oxides of nitrogen and particulate matter simultaneously. This is well established in the literature. Less established is how well such dilute combustion processes influence soot formation and affect soot that is emitted from diesel engines under such combustion modes. This work focuses on characterization of the nanostructure and oxidative reactivity of soot generated by a light-duty turbodiesel engine operating under a dilute, low-temperature combustion process referred to as high-efficiency clean combustion. The high-efficiency clean combustion soot samples are shown to have a fullerenic nanostructure, characterized by high levels of tortuosity of the fringe layers as seen in transmission electron micrograph images and as quantified using an image processing algorithm. Thermogravimetric analysis of the high-efficiency clean combustion soot samples shows that they have higher rates of oxidation than soot samples from a conventional diesel combustion mode. The linkage between the nanostructure of the high-efficiency clean combustion soot samples and their oxidative reactivity reinforces and supports the structure–property relationship for soot that greater curvature on the soot nanostructure leads to significant increases in oxidative reactivity.

Yehliu, Kuen↗

Development of a GCR Event-based Risk Model

A goal at NASA is to develop event-based systems biology models of space radiation risks that will replace the current dose-based empirical models. Complex and varied biochemical signaling processes transmit the initial DNA and oxidative damage from space radiation into cellular and tissue responses. Mis-repaired damage or aberrant signals can lead to genomic instability, persistent oxidative stress or inflammation, which are causative of cancer and CNS risks. Protective signaling through adaptive responses or cell repopulation is also possible. We are developing a computational simulation approach to galactic cosmic ray (GCR) effects that is based on biological events rather than average quantities such as dose, fluence, or dose equivalent. The goal of the GCR Event-based Risk Model (GERMcode) is to provide a simulation tool to describe and integrate physical and biological events into stochastic models of space radiation risks. We used the quantum multiple scattering model of heavy ion fragmentation (QMSFRG) and well known energy loss processes to develop a stochastic Monte-Carlo based model of GCR transport in spacecraft shielding and tissue. We validated the accuracy of the model by comparing to physical data from the NASA Space Radiation Laboratory (NSRL). Our simulation approach allows us to time-tag each GCR proton or heavy ion interaction in tissue including correlated secondary ions often of high multiplicity. Conventional space radiation risk assessment employs average quantities, and assumes linearity and additivity of responses over the complete range of GCR charge and energies. To investigate possible deviations from these assumptions, we studied several biological response pathway models of varying induction and relaxation times including the ATM, TGF -Smad, and WNT signaling pathways. We then considered small volumes of interacting cells and the time-dependent biophysical events that the GCR would produce within these tissue volumes to estimate how GCR event rates mapped to biological signaling induction and relaxation times. We considered several hypotheses related to signaling and cancer risk, and then performed simulations for conditions where aberrant or adaptive signaling would occur on long-duration space mission. Our results do not support the conventional assumptions of dose, linearity and additivity. A discussion on how event-based systems biology models, which focus on biological signaling as the mechanism to propagate damage or adaptation, can be further developed for cancer and CNS space radiation risk projections is given.

Cucinotta, Francis A.↗

Pitting behavior of friction stir repair-welded 304L stainless steel in 3.5% NaCl solution at room temperature: role of grain and defect structures

Stainless steel (SS) canisters used for storing spent nuclear waste are prone to chloride-induced stress corrosion cracking. Friction stir welding (FSW), being a low heat input process, can be used for repair welding of these canisters. In this study, an artificial crack was introduced on the 304L SS coupons by an electric discharge machining process. The artificial crack was repair-welded by FSW by maintaining the tool temperature a constant at two levels (725 and 825 °C). Friction stirring significantly reduced the grain size of the stirred zone (SZ) from about 47 to 2–4 μm. The fraction of low-angle grain boundaries increased in the SZ from 2 to 37–43%. Here, on the other hand, the fraction of special grain boundaries (Σ3 and Σ9) that was ~ 50% in the base metal reduced to < 10% in the SZ. During friction stirring, the oxide layer of artificial crack was broken and aligned to form a spiral defect called lazy-S structure. All these microstructural changes affected the corrosion behavior of the FSW specimens when tested in 3.5% NaCl at room temperature using cyclic polarization, chronoamperometry, and electrochemical impedance spectroscopy. The FSW specimens showed lower polarization resistance and lower transpassive potential than those of the base metal specimens. However, the pitting protection potentials of the FSW specimens were higher than that of the base metal. The pitting behavior of the FSW specimens was influenced more by the preferential attack on the lazy-S region than by passive film breakdown. The flat band potentials of the passive film formed on the FSW specimens were more positive than that of base metal. The charge carrier density of passive film formed on the FSW specimens was higher than that of the base metal. The higher fraction of low-angle grain boundaries present in the FSW specimens could supply more number of misorientation dislocations at the metal/film interface which could form anion vacancies by a climb process leading to formation of oxide at these locations without stressing the substrate. Therefore, low-angle boundaries are considered helpful for formation of stress-free passive films that will be highly stable and enhance both pitting and stress corrosion cracking resistance.

Dry storage canister↗

A completely precious metal–free alkaline fuel cell with enhanced performance using a carbon-coated nickel anode

Significance We present a groundbreaking advance in completely nonprecious hydrogen fuel cell technologies achieving a record power density of 200 mW/cm 2 with Ni@CN x anode and Co−Mn cathode. The 2-nm CN x coating weakens the O-binding energy, which effectively mitigates the undesirable surface oxidation during hydrogen oxidation reaction (HOR) polarization, leading to a stable fuel cell operation for Ni@CN x over 100 h at 200 mA/cm 2 , superior to a Ni nanoparticle counterpart. Ni@CNx exhibited a dramatically enhanced tolerance to CO relative to Pt/C, enabling the use of hydrogen gas with trace amounts of CO, critical for practical applications. The complete removal of precious metals in fuel cells lowers the catalyst cost to virtually negligible levels and marks a milestone for practical alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biological implications of selenium in adolescent rats exposed to binge drinking: Oxidative, immunologic and apoptotic balance

Alcohol intermittent binge drinking (BD) during adolescence decreases the levels of selenium (Se), a trace element that plays a key biological role against oxidative damage in hepatocytes through different selenoproteins such as the antioxidant enzymes glutathione peroxidases (GPx1 and Gpx4) and selenoprotein P (SelP). In this context, it has been found that GPx4 has an essential antioxidant role in mitochondria modulating the apoptosis and NF-kB activation (a factor intimately related to apoptosis and immune function). To further investigate the effectiveness of selenium supplementation in oxidative balance, inflammation and apoptosis, the present study examined the protective effects of 0.4 ppm of dietary selenite administrated to adolescent rats exposed to BD. BD consumption depleted Se deposits in all the tissues studied. In liver, GPx1 activity and expression were decreased leading to protein and lipid hepatic oxidation. Moreover GPx4 and NF-kB expression were also decreased in liver, coinciding with an increase in caspase-3 expression. This hepatic profile caused general liver damage as shown the increased serum transaminases ratio AST/ALT. Proinflammatory serum citokines and chemocines were decreased. Se supplementation therapy used restored all these values, even AST levels. These findings suggest for first time that Se supplementation is a good strategy against BD liver damage during adolescence, since it increases GPx1 and GPx4 expression and avoids NF-kB downregulation and caspase-3 upregulation, leading to a better oxidative, inflammatory and apoptotic liver profile. The therapy proposed could be considered to have a great biological efficacy and to be suitable for BD exposed teenagers in order to avoid future hepatic complications. - Highlights: • Binge drinking exposition increases ratio AST/ALT and caspase-3 expression. • Binge drinking also decreases citokines, chemocines and GPx4 and NF-kB expression. • Se supplementation therapy improves oxidative, inflammatory and apoptotic liver profile. • The therapy proposed could suitable in BD exposition to avoid hepatic complications.

60 APPLIED LIFE SCIENCES↗

Role of carbon order in structural transformations and hydrogen evolution induced by reactive ball milling in cyclohexene

Demineralized Summit (DS) anthracite, DS annealed at 1673 K, and graphite are used to explore the effect of precursor order on structural transformations and H{sub 2} evolution that result during reactive ball milling. Carbon structure was assessed before and after milling with temperature-programmed oxidation, X-ray diffraction (XRD), ultraviolet Raman spectroscopy, N{sub 2} adsorption, He density, and solvent swelling. Graphite milled in cyclohexene is primarily nanocrystalline graphite, with 8 wt % amorphous content leading to low-temperature oxidation, swelling, increased surface area, and mesoporosity. Milling the disordered DS leads to signs of increased sp{sup 2} clustering, increased cross-linking, a significant ultramicroporosity with pores less than 8 angstrom, and low-temperature H{sub 2} evolution. The carbon fraction of annealed DS behaves similarly to graphite in the mill.

01 COAL, LIGNITE, AND PEAT↗

Investigation of Corrosion Behavior of Ti/TiN Multilayers on Al7075 Deposited by High-Vacuum Magnetron Sputtering in 3.5% NaCl Solution

Although Al 7075 has many favorable mechanical properties such as the large strength-to-weight ratio, the relatively poor corrosion resistance has restricted industrial applications. In this work, Ti/TiN as hard multilayered and nanostructured coatings are deposited on the relatively soft Al 7075 structure by high-vacuum radio-frequency magnetron sputtering and the phase, structure, and morphology are investigated in details. The corrosion behavior is evaluated by electrochemical impedance spectroscopy in 3.5% NaCl at a pH of 7.5 for 1, 6, 12, 24, 36, 48, 60, and 72 h. At time points of 1, 6, 12, and 24 h, primary oxide layers and double layers are formed, but the corrosive medium penetrates the primary titanium nitride columnar structure. At longer time points of 24, 36, 48, 60, and 72 h, formation of stronger oxide and double layers leads to better corrosion resistance which is 14.8 times better than that observed from the uncoated substrate after immersion for 36 h. According to R{sub ct}, the corrosion resistances of the short and long immersion groups are 808.5-1984 and 808.5-1248 kΩ cm{sup 2}, respectively, thereby confirming the effectiveness of the Ti/TiN coating against corrosion in comparison with the corrosion resistance of 84.3 kΩ cm{sup 2} observed from the uncoated Al 7075. The smallest corrosion resistance of 808.5 kΩ cm{sup 2} observed at the time point of 24 h is 9.6 times that of the uncoated substrate. Graphical Abstract: A 1.4-µm-thick Ti/TiN hard nanostructured coating comprising six layers is deposited on the relatively soft Al 7075 substrate by high-vacuum radio-frequency magnetron sputtering at 100 °C. The first layer of the intermediate Ti layer cannot improve the corrosion resistance of the TiN super hard coating with a columnar structure. The second and third intermediate Ti layers play an important role in improving the corrosion resistance of Al 7075 by obstructing defects and coating damage from aggressive Cl{sup −} ions and penetration of water. The mechanism involves self-healing of defects by oxide formation and Warburg resistance by diffusion control. .

36 MATERIALS SCIENCE↗