Search NASA⌕ Search

SEARCH · Search NASA

Results for “Local structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Quasi-periodic Fast-mode Wave Trains Within a Global EUV Wave and Sequential Transverse Oscillations Detected by SDO-AIA

We present the first unambiguous detection of quasi-periodic wave trains within the broad pulse of a global EUV wave (so-called EIT wave) occurring on the limb. These wave trains, running ahead of the lateral coronal mass ejection (CME) front of 2-4 times slower, coherently travel to distances greater than approximately solar radius/2 along the solar surface, with initial velocities up to 1400 kilometers per second decelerating to approximately 650 kilometers per second. The rapid expansion of the CME initiated at an elevated height of 110 Mm produces a strong downward and lateral compression, which may play an important role in driving the primary EUV wave and shaping its front forwardly inclined toward the solar surface. The wave trains have a dominant 2 minute periodicity that matches the X-ray flare pulsations, suggesting a causal connection. The arrival of the leading EUV wave front at increasing distances produces an uninterrupted chain sequence of deflections and/or transverse (likely fast kink mode) oscillations of local structures, including a flux-rope coronal cavity and its embedded filament with delayed onsets consistent with the wave travel time at an elevated (by approximately 50%) velocity within it. This suggests that the EUV wave penetrates through a topological separatrix surface into the cavity, unexpected from CME-caused magnetic reconfiguration. These observations, when taken together, provide compelling evidence of the fast-mode MHD wave nature of the primary (outer) fast component of a global EUV wave, running ahead of the secondary (inner) slow component of CME-caused restructuring.

Solar Corona↗
NASA NTRS2023

Equilibrium Selection via Current Sheet Relaxation and Guide Field Amplification

Although there is a continuous spectrum of current sheet equilibria, how a particular equilibrium is selected by a given system remains a mystery. Yet, only a limited number of equilibrium solutions are used for analyses of magnetized plasma phenomena. Here we present the exact process of equilibrium selection, by analyzing the relaxation process of a disequilibrated current sheet under a finite guide field. It is shown via phase-space analyses and particle-in-cell simulations that the current sheet relaxes in such a way that the guide field is locally amplified, yielding a mixed equilibrium from the spectrum. Comparisons to spacecraft observations and solar wind current sheet statistics demonstrate that such mixed equilibria are ubiquitous and exist as underlying local structures in various physical environments.

Young-Dae Yoon↗
DOE OSTI2020

Perovskite relaxor-PBTI03 based ferroelectric ceramics with ultrahigh dielectric and piezoelectric properties through polar nanoregions engineering

Embodiments of the invention can be directed to controlling and/or engineering the size and/or volume of polar nanoregions (PNRs) of ferroelectric polycrystalline material systems. Some embodiments can achieved this via composition modifications to cause changes in the PNRs and/or local structure. Some embodiments can be used to control and/or engineer dielectric, piezoelectric, and/or electromechanical properties of polycrystalline materials. Controlling and/or engineering the PNRs may facilitate improvements to the dielectric, piezoelectric, and/or electromechanical properties of materials. Controlling and/or engineering the PNRs may further facilitate generating a piezoelectric material that may be useful for many different piezoelectric applications.

Li, Fei↗
DOE OSTI2024

LDRD poster - Identifying the speciation of salt-based actinides in the presence of contaminants

Molten salt reactors (MSRs) are among the most promising Generation IV nuclear reactors. The salts used in these reactors exhibit a high affinity for moisture and oxygen, and heating does not eliminate the oxides that are formed. Additionally, due to the high operating temperatures, reactor parts experience pronounced corrosion, and the resulting corrosion products integrate into the fuel salt system. It is hypothesized that the speciation of f-elements in molten salts would change in the presence of oxides and corrosion products. These changes in local structure can alter the rheological properties, which are critical to the operational and safety parameters of the reactors. Therefore, an in-depth understanding of how corrosion products influence lanthanide/actinide speciation is crucial. To test this hypothesis, lanthanides (as surrogates for actinides) and actinide chlorides were mixed with oxides (such as nickel oxide and lithium oxide) and/or corrosion products (e.g., nickel chloride) and reacted in molten salts. The resulting phases were analyzed using techniques such as powder X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, and nuclear magnetic resonance spectroscopy. In the presence of oxides, due to the high oxophilicity of f-elements, these elements capture oxygen from the oxides, forming lanthanide/actinide oxide or oxychloride phases. Specifically, with cerium chloride, the introduction of lithium oxide to the formation of various final products depending on the oxide concentration. At lower oxide concentrations, cerium oxychloride (CeOCl) in the +3 oxidation state was observed, while an increase in the oxide concentration led to the formation of cerium dioxide (CeO2), where cerium is in the +4 oxidation state. In contrast, with nickel oxide, CeOCl formation was consistently observed, regardless of the oxide concentration. This project successfully determined that the speciation of f-elements change in the presence of oxides and different oxides in molten salts result in different final products. When the influence of nickel chloride was examined, changes in f-element speciation were not observed. However, it reacted with lithium chloride to generate a lithium-nickel-chloride (Li6NiCl8) phase, which was also observed when nickel oxide was reacted. Computational models were developed to simulate the phases anticipated under experimental conditions.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2023

Exploring the speciation of actinide salts in the presence of contaminants related to molten salt reactors

Molten salt reactors (MSR) are up-and-coming Generation IV nuclear reactors with either coolant and/or radioactive fuel in molten salt form. Due to their improved safety, efficiency, affordability and convenient waste processing system, these reactors are considered a superior alternative to conventional ones. However, prior to commercial implementation, it is necessary to have an extensive understanding of the reactions occurring in the MSR. The safety parameters of the MSR are determined by the rheological properties such as density and viscosity of the molten salt and these properties are governed by the local structure of the molten salts. Due to the high operational temperatures of MSR's, corrosion plays an important role. Because of their influence, the container corrosion products become part of the fuel salt matrix. In this work, we are investigating how these corrosion products, e.g., Mo, Ni, Cr, would impact the speciation of the actinide metal centers. For the initial studies, lanthanides are used as a surrogate for actinides. Lanthanide chloride salts (LnCl3) are mixed with transition metals and excess of alkali or alkali earth metal salts or salt mixtures (LiCl, NaCl, KCl). These are added to an alumina crucible, placed in a quartz tube, and sealed under a vacuum. This is heated up to around 1000 °C and slowly cooled to a temperature above the melting point of the salt and at that temperature, the reaction is taken out of the furnace. The excess salt is removed, and the resulting product is analyzed using X-ray diffraction techniques, scanning electron microscopy, and spectroscopic methods such as Raman, UV-Visible, and FTIR spectroscopy.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
NASA NTRS1991

Viscoplastic response of structures for intense local heating

A thermoviscoplastic finite element method employing the Bodner-Partom constitutive model is used to investigate the response of simplified thermal-structural models to intense local heating. With rapid rises of temperature, the nickel alloy structures display initially higher yield stresses due to strain rate effects. As temperatures approach elevated values, yield stress and stiffness degrade rapidly and pronounced plastic deformation occurs.

Thornton, Earl A.↗
NASA NTRS1994

Viscoplastic response of structures for intense local heating

A thermoviscoplastic finite element method employing the Bodner-Partom constitutve model is used to investigate the response of simplified thermal-structural models to intense local heating. The computational method formulates the problem in rate and advances the solution in time by numerical integration. The thermoviscoplastic response of simplified structures with prescribed temperatures is investigated. With rapid rises of temperature, the nickel alloy structures display initially higher yield stresses due to strain rate effects. As temperatures approach elevated values, yield stress and stiffness degrade rapidly and pronounced plastic deformation occurs.

Thornton, Earl A.↗
DOE OSTI2021

Coupling of regional geophysics and local soil-structure models in the EQSIM fault-to-structure earthquake simulation framework

Accurate understanding and quantification of the risk to critical infrastructure posed by future large earthquakes continues to be a very challenging problem. Earthquake phenomena are quite complex and traditional approaches to predicting ground motions for future earthquake events have historically been empirically based whereby measured ground motion data from historical earthquakes are homogenized into a common data set and the ground motions for future postulated earthquakes are probabilistically derived based on the historical observations. This procedure has recognized significant limitations, principally due to the fact that earthquake ground motions tend to be dictated by the particular earthquake fault rupture and geologic conditions at a given site and are thus very site-specific. Historical earthquakes recorded at different locations are often only marginally representative. There has been strong and increasing interest in utilizing large-scale, physics-based regional simulations to advance the ability to accurately predict ground motions and associated infrastructure response. However, the computational requirements for simulations at frequencies of engineering interest have proven a major barrier to employing regional scale simulations. In a U.S. Department of Energy Exascale Computing Initiative project, the EQSIM application development is underway to create a framework for fault-to-structure simulations. This framework is being prepared to exploit emerging exascale platforms in order to overcome computational limitations. This article presents the essential methodology and computational workflow employed in EQSIM to couple regional-scale geophysics models with local soil-structure models to achieve a fully integrated, complete fault-to-structure simulation framework. Here, the computational workflow, accuracy and performance of the coupling methodology are illustrated through example fault-to-structure simulations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2016

The Structure of the Local Hot Bubble

Diffuse X-rays from the Local Galaxy (DXL) is a sounding rocket mission designed to quantify and characterize the contribution of Solar Wind Charge eXchange (SWCX) to the Diffuse X-ray Background and study the properties of the Local Hot Bubble (LHB). Based on the results from the DXL mission, we quantified and removed the contribution of SWCX to the diffuse X-ray background measured by the ROSAT All Sky Survey. The cleaned maps were used to investigate the physical properties of the LHB. Assuming thermal ionization equilibrium, we measured a highly uniform temperature distributed around kT = 0.097 keV +/- 0.013 keV (FWHM) +/- 0.006 keV(systematic). We also generated a thermal emission measure map and used it to characterize the three-dimensional (3D) structure of the LHB, which we found to be in good agreement with the structure of the local cavity measured from dust and gas.

X-rays↗
DOE OSTI2024

X-ray and molecular dynamics study of the temperature-dependent structure of molten NaF-Zr⁢F 4

The local atomic structure of NaF-Zr⁢F 4 (53–47 mol%) molten system and its evolution with temperature are examined with x-ray scattering measurements which are then used to validate the quality of ab initio and neural network-based molecular dynamics (NNMD) calculations in the temperature range 515–700°⁢C. The machine-learning enhanced NNMD calculations offer improved efficiency while maintaining accuracy at higher distances compared to ab initio calculations. Looking at the evolution of the pair distribution function with increasing temperature, a fundamental change in the liquid structure within the selected temperature range, accompanied by a slight decrease in overall correlation is revealed. NNMD calculations indicate the coexistence of three different fluorozirconate complexes: [Zr⁢F 6 ] 2– , [Zr⁢F 7 ] 3– , and [Zr⁢F 8 ] 4– , with a shift in the dominant coordination state from the 7-coordinated Zr cation toward a 6-coordinated cation with increasing temperature. The study also highlights the metastability of different local coordination structures, with frequent interconversions between the 6- and 7-coordinate states. Analysis of the Zr-F-Zr angular distribution function reveals the presence of both “edge-sharing” and “corner-sharing” fluorozirconate complexes with specific bond angles and distances in accord with previous studies, while the next-nearest-neighbor cation-cation correlations demonstrate a clear preference for unlike cations as nearest-neighbor pairs, emphasizing nonrandom arrangement. Finally, these findings contribute to a comprehensive understanding of the complex local structure of the molten salt, providing insights into temperature-dependent preferences and correlations within the molten system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local atomic and magnetic structure of multiferroic (Sr,Ba)⁢(Mn,Ti)⁢O 3

Here, we present a detailed study of the local atomic and magnetic structure of the type-I multiferroic perovskite system (Sr,Ba)(Mn,Ti)O 3 using x-ray and neutron pair distribution function (PDF) analysis, polarized neutron scattering, and muon spin relaxation (μSR) techniques. The atomic PDF analysis reveals widespread nanoscale tetragonal distortions of the crystal structure even in the paraelectric phase with average cubic symmetry, corresponding to incipient ferroelectricity in the local structure. Magnetic PDF analysis, polarized neutron scattering, and μSR likewise confirm the presence of short-range antiferromagnetic correlations in the paramagnetic state, which grow in magnitude as the temperature approaches the magnetic transition. We show that these short-range magnetic correlations coincide with a reduction of the tetragonal (i.e., ferroelectric) distortion in the average structure, suggesting that short-range magnetism can play an important role in magnetoelectric and/or magnetostructural phenomena even without genuine long-range magnetic order. The reduction of the tetragonal distortion scales linearly with the local magnetic order parameter, pointing to spontaneous linear magnetoelectric coupling in this system. These findings provide greater insight into the multiferroic properties of (Sr,Ba)(Mn,Ti)O 3 and demonstrate the importance of investigating the local atomic and magnetic structure to gain a deeper understanding of the intertwined degrees of freedom in multiferroics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Anomalous Behavior in the Atomic Structure of Nb$^{3}$Sn under High Pressure

In the present study, the local atomic structure of a Nb3Sn superconductor sample has been probed by X-ray absorption fine structure (XAFS) as a function of hydrostatic pressure (from ambient up to 26 GPa) using a diamond anvil cell set-up. The analysis of the Nb-K edge extended X-ray absorption fine structure (EXAFS) data was carried out combining standard multi shell structural refinement and reverse Monte Carlo method to provide detailed in situ characterization of the pressure-induced evolution of the Nb local structure in Nb3Sn. The results highlight a complex evolution of Nb chains at the local atomic scale, with a peculiar correlated displacement of Nb–Nb and Nb–Nb–Nb configurations. Such a local effect appears related to anomalies evidenced by X-ray diffraction in other superconductors belonging to the same A15 crystallographic structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Micro-structuration effects on local magneto-transport in [Co/Pd]IrMn thin films

We measured the local magneto-transport (MT) signal with an out-of-plane magnetic field, including magneto-resistance (MR) and Extraordinary Hall effect (EHE), in exchange-biased [Co/Pd]IrMn thin multilayers that are micro-structured with a 100 μm window. We found that when measured locally around the window, the MT signal deviate from the expected behavior. We studied possible causes, including film micro-structuration, electrical contact geometry as well as magnetic field angular tilt. We found that tilting the magnetic field direction with respect to the normal direction does not significantly affect the MT signal, whereas the positioning and geometry of the contacts seem to highly affect the MT signal. For comparison purposes, we carried these MT measurements using the Van-der-Pauw method on a set of four microscopic contacts directly surrounding the window, and on another set of micro-contacts located outside the window, as well as a set of four contacts positioned several millimeters away of each other at the corners of the wafer. If the contacts are sufficiently far apart, the EHE and MR signals have the expected shape and are not significantly affected by the presence of the window. If, on the other hand, the contacts are micro-positioned, the shape of the EHE signal is drastically deformed, and may be modeled as a mix of the standard EHE and MR signals measured on the outer contacts. Furthermore, if the micro-contacts are located directly around the window, the deformation is amplified, and the weight of the MR signal in the mix is further increased by about 40 %. This suggests that the electron path in the Hall geometry is disturbed by both the proximity of the electrodes and by the presence of the window, which both contribute to the deformation for about two-third and one third, respectively.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Global functions in global-local finite-element analysis of localized stresses in prismatic structures

An important consideration in the global local finite-element method (GLFEM) is the availability of global functions for the given problem. The role and mathematical requirements of these global functions in a GLFEM analysis of localized stress states in prismatic structures are discussed. A method is described for determining these global functions. Underlying this method are theorems due to Toupin and Knowles on strain energy decay rates, which are related to a quantitative expression of Saint-Venant's principle. It is mentioned that a mathematically complete set of global functions can be generated, so that any arbitrary interface condition between the finite element and global subregions can be represented. Convergence to the true behavior can be achieved with increasing global functions and finite-element degrees of freedom. Specific attention is devoted to mathematically two-dimensional and three-dimensional prismatic structures. Comments are offered on the GLFEM analysis of NASA flat panel with a discontinuous stiffener. Methods for determining global functions for other effects are also indicated, such as steady-state dynamics and bodies under initial stress.

Dong, Stanley B.↗
DOE OSTI2020

A Look Inside the Black Box: Using graph-theoretical descriptors to interpret a Continuous-Filter Convolutional Neural Network (CF-CNN) trained on the global and local minimum energy structures of neutral water clusters

A Continuous Filter Convolutional Neural Network (CF-CNN) was trained to predict the potential energy of water cluster networks \ce{(H2O)_{\textit{N}}}, \textit{N}=10--30, corresponding to local minima lying within 5 kcal/mol from the putative minima taken from a newly published database containing over 5 million unique networks. The chemical sampling space of the database was characterized using chemical descriptors derived from graph theory, which led to the identification of important trends in the topology, connectivity, polygon structures associated with the various networks as a function of cluster size. The resulting graphs are available alongside the original database at \url{https://sites.uw.edu/wdbase/}. The CF-CNN trained on a subset of 500,000 networks for (\textit{N}=10, 30) yielded a mean absolute error of 0.002$\pm$0.002 kcal/mol per water molecule, giving the trained CF-CNN the highest accuracy of any neural network-based surrogate model to date. In addition, clusters of sizes not included in the training set exhibited errors of the same magnitude, indicating that the CF-CNN ptotocol is general enough to accurately predict energies of networks for both smaller and larger sizes than those used during training. The graph-theoretical descriptors were developed in order to analyze the properties of the full database and interpret the predictive power of the CF-CNN. Using topology measures, such as the Wiener index and the average shortest path length along with two similarity measures, we showed that all networks from the test set were within the range of the ones from the training set, suggesting that the training set covered the chemical space of interest quite well. Our graph analysis suggests that the mean degree and number of polygons for networks with larger errors tend to lie further from the mean than those with lower errors. The generality of the used CF-CNN was thus demonstrated, while the use of the graph-theoretical descriptors assisted in interpreting the predicted results.

Bilbrey, Jenna A.↗
DOE OSTI2025

Asymmetric linker generates intrinsically disordered metal–organic framework with local MOF-74 structure

Here, we report an intrinsically disordered MOF in the MOF-74 family, Mg 2−x (as-dobpdc) (as-dobpdc 4− = 3′,4-dioxidobiphenyl-3,4′-dicarboxylate). Despite the absence of crystallinity, this material exhibits local ordering consistent with that of its crystalline isomers, maintains porosity, and exhibits a high density of open metal sites. Metal–organic frameworks (MOFs) are typically valued for their combination of crystallinity, porosity, and tunability. However, amorphous MOFs can retain local order while introducing advantages, such as broader distribution of active sites types, reduced thermal conductivity, and emergent modes of tunability via control over the type of disorder. Conventional amorphization strategies rely on external stimuli including pressure, temperature, stress, electrical discharge, or fast precipitation. Recently, amorphous MOFs have been accessed directly using low symmetry organic linkers.

Dinakar, Bhavish [Massachusetts Institute of Techn↗
DOE OSTI2020

GPU acceleration of all-electron electronic structure theory using localized numeric atom-centered basis functions

We present an implementation of all-electron density-functional theory for massively parallel GPU-based platforms, using localized atom-centered basis functions and real-space integration grids. Special attention is paid to domain decomposition of the problem on non-uniform grids, which enables compute- and memory-parallel execution across thousands of nodes for real-space operations, e.g. the update of the electron density, the integration of the real-space Hamiltonian matrix, and calculation of Pulay forces. To assess the performance of our GPU implementation, we performed benchmarks on three different architectures using a 103-material test set. We find that operations which rely on dense serial linear algebra show dramatic speedups from GPU acceleration: in particular, SCF iterations including force and stress calculations exhibit speedups ranging from 4.5 to 6.6. For the architectures and problem types investigated here, this translates to an expected overall speedup between 3–4 for the entire calculation (including non-GPU accelerated parts), for problems featuring several tens to hundreds of atoms. Additional calculations for a 375-atom Bi2Se3 bilayer show that the present GPU strategy scales for large-scale distributed-parallel simulations.

42 ENGINEERING↗