SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cathodic electrocatalysts development for use in low temperature hydrogen-oxygen fuel cells with alkaline electrolyte
1500-hour performance tests of liquid-cooled contained-electrolyte low temperature fuel cell system
Performance tests on alkaline earth oxide electron emitters at low temperatures
An experimental investigation was performed to study aircraft fuels at low temperatures near the freezing point. The objective was an improved understanding of the flowability and pumpability of the fuels under conditions encoutered during cold weather flight of a long range commercial aircraft. The test tank simulated a section of an outer wing tank and was chilled on the upper and lower surfaces. Fuels included commercial Jet A and Diesel D-2; JP-5 from oil shale; and Jet A, intermediate freeze point, and D-2 fuels derived from selected paraffinic and naphthenic crudes. A pour point depressant was tested.
We present brief overview of our study on the low temperature flux growth of two very important novel wide bandgap materials 2H-SiC and Beta-gallium oxide (Beta-Ga2O3). We have synthesized and grown 5 millimeter to 1 centimeter size single crystals of Beta-gallium oxide (Beta-Ga2O3). We used a flux and semi wet method to grow transparent good quality crystals. In the semi-wet method Ga2O3 was synthesized with starting gallium nitrate solution and urea as a nucleation agent. In the flux method we used tin and other metallic flux. This crystal was placed in an alumina crucible and temperature was raised above 1050 degrees Centigrade. After a time period of thirty hours, we observed prismatic and needle shaped crystals of gallium oxide. Scanning electron microscopic studies showed step growth morphology. Crystal was polished to measure the properties. Bandgap was measured 4.7electronvolts using the optical absorption curve. Another wide bandgap hexagonal 2H-SiC was grown by using Si-Al eutectic flux in the graphite crucible. We used slight AlN also as the impurity in the flux. The temperature was raised up to 1050 degrees Centigrade and slowly cooled to 850 degrees Centigrade. Preliminary characterization results of this material are also reported.
Three joining methods were considered for use in fabricating cooling coils for the National Transonic Facility. After analysis and preliminary testing, soldering was chosen as the cooling coil joining technique over mechanical force fit and brazing techniques. Charpy V-Notch tests, cyclic thermal tests (ambient to 77.8 K) and tensile tests at cryogenic temperatures were performed on solder joints to evaluate their structural integrity. It was determined that low temperature solder can be used to ensure good fin-to-tube contact for cooling-coil applications.
High entropy oxides (HEOs) have recently attracted increasing attention due to their remarkable properties and relatively low cost. Herein we report a simple, highly scalable, and low temperature method for synthesizing spinel (FeNiCoCuZn) 3 O 4 (HEO). We heated an aqueous solution containing divalent cations in high alkali environments to temperatures of 25 - 95 °C for 24 h under atmospheric pressure. The HEO, synthesized at 95 °C for 24 h in 1 M KOH, was paramagnetic at room temperature, with a magnetic mass susceptibility of χ = (7.5 ± 0.2) × 10 –7 m 3 ·kg –1 . It demonstrated stable electrochemical lithium storage performance, with a gravimetric capacity of ∼300 mAh·g –1 at 100 mA·g –1 . It was also active in the electrocatalytic oxygen evolution reaction with an overpotential of 460 mV in alkaline media. The band gap energies were in the range of 2.4 eV. Our advancement in the synthesis and processing of transition metal-based HEOs will undoubtedly render them a viable solution for next generation materials for energy production and storage.
Feasibility of removing metabolic carbon dioxide and water from space cabin atmosphere by low temperature freezeout process
Epitaxial beta SiC film formation on SiC by reactive evaporation or sputtering at low temperature
Summaries of low-temperature self-ignition data of various rocket fuels with mixed acid (nitric plus sulfuric) are presented. Several fuels are shown to have shorter ignition-delay intervals and less variation in delay intervals at moderate and sub-zero temperatures than crude N-ethylaniline (monoethylaniline),a rocket fuel in current use.
This paper presents a methodology for the analysis of low temperature creep of titanium alloys in order to establish design limitations due to the effect of creep. The creep data on a titanium Ti-6Al-2Cb-1Ta-0.8Mo are used in the analysis. A creep equation is formulated to determine the allowable stresses so that creep at ambient temperatures can be kept within an acceptable limit during the service life of engineering structures or instruments. Microcreep which is important to design of precision instruments is included in the discussion also.
We examine the carbon and oxygen isotope composition of carbonate minerals that formed in two low-temperature terrestrial environments. Field locations were chosen to represent environments where microcrystalline carbonates (caliches) form. Samples include caliche crusts collected from the tsekel zone of N. Yucatan, Mexico, as well as carbonate mud from the edge of a near-by salt pan, representing both ancient and modern-precipitated carbonates. Additional field samples of surface-coating caliche were collected from two volcanic fields in Arizona. Preliminary results indicate that there is an overall depletion of 18O and 13C as a function of the extent of meteoric diagenesis. These data are used as terrestrial analogs to gauge whether carbonates that have been found within Martian meteorites could possibly have formed under these or similar conditions on Mars.
This viewgraph presentation reviews the low temperature, Total Ionizing Dose (TID) tests of radiation hardened serial to parallel converter to be used on the James Webb Space Telescope. The test results show that the original HV583 level shifter - a COTS part -was not suitable for JWST because the supply currents exceeded specs after 20 krad( Si) .The HV584 - functionally similar to the HV583 -was designed using RHBD approach that reduced the leakage currents to within acceptable levels and had only a small effect on the level-shifted output voltage.
Lithium promoted 2%Pt/m-ZrO 2 catalysts previously observed to exhibit higher rates for the low temperature water-gas shift (LTS) were tested for the ethanol steam reforming with the aim of exploring the potential tuning of the selectivity. Characterization of catalysts having optimized Li content (0.5–0.75%Li) for LTS exhibited (a) weakened C—H bonding of formate, a proposed intermediate in the LTS mechanism, as shown by a shift in the ν(CH) band to lower wavenumbers, (b) a relatively low extent of blocking of Pt, as measured by the ν(CO) band intensity of Pt-CO, (c) increased basicity as measured by CO 2 temperature-programmed desorption with mass spectrometry, but not so high as to strongly inhibit CO 2 product removal, and finally (d) no evidence of electron transfer from Li to Pt. Here, for this study, the same catalysts were tested for ethanol steam reforming (ESR). Results show that Li could likewise weaken the C—C bond of the acetate intermediate, the analog of formate in LTS, and facilitate decarboxylation over decarbonylation altering the selectivity in favor of methanation. This trend was confirmed by fixed bed reaction testing, in-situ infrared spectroscopy experiments of transient ESR, and temperature-programmed ESR using MS. The Li-doped catalysts may be used to pre-reform ethanol prior to feeding to a methane steam reformer to increase the overall H 2 selectivity of the process. DRIFTS of steady state ESR revealed that deactivation occurs through losses in the Pt-support interface, thereby hindering the turnover of the acetate intermediate.
The changes in structural integrity and microstructure of Portland-limestone cement pastes were investigated in the course of magnesium sulfate attack at low temperature. A deterioration front, consisting of three distinct layers (brucite, gypsum, leached cement matrix), swelled in time due to the expansive nature of the deterioration products, generating cracks and subsequently detaching from the sound cement matrix, continuously promoting the process. Gypsum and thaumasite characterized the leached matrix, which experienced extensive cross-linking of the aluminosilicate structures, as a result of decalcification and dealumination of the calcium silicate hydrates (C(A)SH), impairing the overall mechanical performance. CSH of low packing density was most severely affected by the process, as confirmed by the significant drop in nano-mechanical properties. The increased rate of deterioration with limestone content was tentatively attributed to the prevalent morphology of the CSH phase. Results were validated by thermodynamic simulations, indicating that the real systems did not reach equilibrium.
Explore the source record for details and available documents.
Cathodic electrocatalyst materials studied for use in low temperature hydrogen oxygen fuel cells with alkaline electrolyte
Far Ir transmission properties of polycrystalline and single crystal silicon at low temperatures, using spectrophotometer data recording