Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Multilayer X-ray mirrors for the (4.4-5)-nm carbon-window spectral region

Cr/C-based multilayer X-ray mirrors intended for the reflection of X-ray radiation in the 'carbon-window' spectral region ({lambda} = 4.4-5 nm) are fabricated and studied. The structures are formed by magnetron sputtering at different deposition parameters. Under normal incidence, record reflection coefficients up to 15% are reached. The structural parameters of the mirrors are investigated by reflectometry at wavelengths of 0.154 and 4.47 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of gas ratio on tribological properties of sputter deposited TiN coatings

Titanium nitride (TiN) coatings were deposited on Si, corning glass, pins of mild steel (MS, ϕ3mm), aluminium (Al, ϕ4mm) and brass (ϕ6mm) substratesby DC magnetron sputtering. The argon and nitrogen (Ar:N{sub 2})gas ratio was precisely controlled by Mass Flow Controller (MFC) and was varied systematically at diffract values of 10:10,12:08, 16:04 and 18:02sccm. The structural properties of TiN coatings were characterized by X-ray diffraction (XRD) and its surface topography was studied using field emission scanning electron microscopy (FE-SEM). The tribological properties of TiN coatings were investigated using pin-on-disc tribometer.

36 MATERIALS SCIENCE↗

Nitrogen stabilized reactive sputtering of optimized TiO{sub 2-x} photocatalysts with visible light reactivity

Photoreactive and visible light responsive nonstoichiometric mixed-phase titania was prepared by reactive direct current magnetron sputtering. Trace amounts of nitrogen were added for process stabilization without being incorporated into the films. Based on the CO{sub 2} photoreduction tests and structural and optical characterization, the influence of the trace nitrogen on the sputtered nonstoichiometric TiO{sub 2} was studied and was compared to nitrogen-doped titania.

36 MATERIALS SCIENCE↗

Note: Ion-induced secondary electron emission from oxidized metal surfaces measured in a particle beam reactor

The secondary electron emission of metals induced by slow ions is characterized in a beam chamber by means of two coaxial semi-cylindrical electrodes with different apertures. The voltages of the outer electrode (screening), inner electrode (collector), and sample holder (target) were set independently in order to measure the effective yield of potential and kinetic electron emissions during ion bombardment. Aluminum samples were exposed to quantified beams of argon ions up to 2000 eV and to oxygen atoms and molecules in order to mimic the plasma-surface interactions on metallic targets during reactive sputtering. The variation of electron emission yield was correlated to the ion energy and to the oxidation state of Al surfaces. This system provides reliable measurements of the electron yields in real time and is of great utility to explore the fundamental surface processes during target poisoning occurring in reactive magnetron sputtering applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mg doping of thermochromic VO{sub 2} films enhances the optical transmittance and decreases the metal-insulator transition temperature

Thermochromic films of Mg{sub x}V{sub 1-x}O{sub 2} were made by reactive dc magnetron sputtering onto heated glass. The metal-insulator transition temperature decreased by {approx}3 K/at. %Mg, while the optical transmittance increased concomitantly. Specifically, the transmittance of visible light and of solar radiation was enhanced by {approx}10% when the Mg content was {approx}7 at. %. Our results point at the usefulness of these films for energy efficient fenestration.

36 MATERIALS SCIENCE↗

Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and Their Application in Nanofiltration Membranes

We investigate the thermal stability of alumina supporting layers sputtered at different conditions and its effect on the growth of aligned single-walled carbon nanotube arrays. Radio frequency magnetron sputtering of alumina under oxygen–argon atmosphere produces a Si-rich alumina alloy film on a silicon substrate. Atomic force microscopy on the annealed catalysts reveals that Si-rich alumina films are more stable than alumina layers with low Si content at the elevated temperatures at which the growth of single-walled carbon nanotubes is initiated. The enhanced thermal stability of the Si-rich alumina layer results in a narrower (< 2.2 nm) diameter distribution of the single-walled carbon nanotubes. Thanks to the smaller diameters of their nanotube pores, membranes fabricated with vertically aligned nanotubes grown on the stable layers display improved ion selectivity.

36 MATERIALS SCIENCE↗

Towards higher stability of resonant absorption measurements in pulsed plasmas

Possible ways to increase the reliability of time-resolved particle density measurements in pulsed gaseous discharges using resonant absorption spectroscopy are proposed. A special synchronization, called “dynamic source triggering,” between a gated detector and two pulsed discharges, one representing the discharge of interest and another being used as a reference source, is developed. An internal digital delay generator in the intensified charge coupled device camera, used at the same time as a detector, is utilized for this purpose. According to the proposed scheme, the light pulses from the reference source follow the gates of detector, passing through the discharge of interest only when necessary. This allows for the utilization of short-pulse plasmas as reference sources, which is critical for time-resolved absorption analysis of strongly emitting pulsed discharges. In addition to dynamic source triggering, the reliability of absorption measurements can be further increased using simultaneous detection of spectra relevant for absorption method, which is also demonstrated in this work. The proposed methods are illustrated by the time-resolved measurements of the metal atom density in a high-power impulse magnetron sputtering (HiPIMS) discharge, using either a hollow cathode lamp or another HiPIMS discharge as a pulsed reference source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical transport in hydrogen-aluminium Co-doped ZnO and Zn{sub 1-x}Mg{sub x}O films: Relation to film structure and composition

ZnO:Al and Zn{sub 1-x}Mg{sub x}O:Al films have been deposited in Ar/H{sub 2} atmospheres by magnetron sputtering from oxidic targets at two substrate temperatures: room temperature and 300 Degree-Sign C. The electrical transport parameters-carrier concentration, resistivity, and Hall mobility-have been measured and related to the structural properties and the chemical composition. The resistivity {rho} both of ZnO:Al as well as Zn{sub 1-x}Mg{sub x}O:Al films decreases with increasing hydrogen flow for the films deposited at room temperature. The decrease is up to 2 orders of magnitude and in both cases due to an increase of the electron concentration and the Hall mobility and occurred despite the fact, that the films became almost X-ray amorphous with increasing hydrogen content. In contrast to these results, for depositions at 300 Degree-Sign C, the resistivity increases with increasing hydrogen portion in the sputtering atmosphere, more strongly for the Zn{sub 1-x}Mg{sub x}O:Al films (3 orders of magnitude). Based on literature data, it is concluded that the built-in atomic hydrogen acts as a shallow donor at low deposition temperatures, while it becomes deactivated at T{sub sub}= 300 Degree-Sign C by the formation of molecular H{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphology dependent electrochemical performance of sputter deposited Sn thin films

Graphical abstract: Smooth homogenous anode surface results in better electrochemical performance in terms of capacity and cycle life. Highlights: ► Controlling rate of deposition of Sn thin films for different surface morphology. ► Higher deposition rate results in poor capacity retention. ► Lower deposition rate of 0.25 nm s{sup −1} helps in higher capacity retention. ► Electrochemical performance correlated homogeneity and interparticle contact area. -- Abstract: This study deals with tailoring of the surface morphology, microstructure, and electrochemical properties of Sn thin films deposited by magnetron sputtering with different deposition rates. Scanning electron microscopy and atomic force microscopy are used to characterize the film surface morphology. Electrochemical properties of Sn thin film are measured and compared by cyclic voltammetry and charge–discharge cycle data at a constant current density. Sn thin film fabricated with a higher deposition rate exhibited an initial discharge capacity of 798 mAh g{sup −1} but reduced to 94 mAh g{sup −1} at 30th cycle. Film deposited with lower deposition rate delivered 770 mAh g{sup −1} during 1st cycle with improved capacity retention of 521 mAh g{sup −1} on 30th cycle. Comparison of electrochemical performances of these films has revealed important distinctions, which are associated with the surface morphology and hence on rate of deposition.

36 MATERIALS SCIENCE↗

Effects of high-temperature thermal annealing on the electronic properties of In-Ga-Zn oxide thin films

Indium gallium zinc oxide (IGZO) thin films were deposited by radio-frequency magnetron sputtering at room-temperature. Then, thermal annealing was conducted to improve the structural ordering. X-ray diffraction and high-resolution transmission electron microscopy demonstrated that the as-deposited IGZO thin films were amorphous and crystallization occurred at 800 and 950 °C. As a result of crystallization at high temperature, the carrier concentration and the Hall mobility of IGZO thin films were sharply increased, which could be ascribed to the increased oxygen vacancies and improved structural ordering of the thin films.

36 MATERIALS SCIENCE↗

Structural Changes in Si–CuSi Films upon Intercalation of Lithium Ions

We studied the possibility of using composite films representing amorphous silicon reinforced with crystalline inclusions of copper silicide as an anode material for lithium-ion batteries with liquid electrolyte. The films were made by layer-by-layer magnetron sputtering of amorphous silicon and copper, followed by low-temperature (100–200°C) annealing of the structure. The tests of the anodes revealed the effect of prolonged intense growth of their reversible capacity. To describe the effect, a phenomenological model based on the multidirectional migration of silicon and copper atoms in an inhomogeneous field of elastic mechanical stresses arising during electrode cycling is proposed.

30 DIRECT ENERGY CONVERSION↗

Condensation Surface Temperature as a Means for Studying Film Formation Mechanisms

A rise in the condensation surface temperature during film growth is a result of energy dissipation on the condensation surface. An example of energy dissipation is the dissipation of chemical reaction heat, which releases during film deposition by reactive magnetron sputtering. The monitoring of the surface temperature during TiN film deposition by reactive (Ti–in–N{sub 2}) and nonreactive (TiN–in–Ar or TiN–in–N{sub 2}) sputtering methods has shown that this temperature is higher in the reactive case and decreases in the (TiN–in–Ar)–(TiN–in–N{sub 2}) sequence of nonreactive sputtering modifications. It has been found that the composition and crystal structure of TiN films do not depend on the growth method and are identical to those of bulk titanium nitride. Based on these results, a formation mechanism of films obtained by the above methods has been suggested. In the case of reactive sputtering, the film was supposed to grow on the condensation surface through a reaction between titanium and nitrogen atoms. In the cases of nonreactive sputtering, the film forms from TiN molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technique for forming ITO films with a controlled refractive index

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

36 MATERIALS SCIENCE↗

Synergy on catalytic effect of Fe-Zr additives mixed in different proportions on the hydrogen desorption from MgH{sub 2}

Mg films with mixed Fe and Zr metallic additives were prepared by rf magnetron sputtering keeping the total metal content constant, about 7 at. %, and changing the [Fe]/[Zr] ratio. Isothermal hydrogen desorption curves showed that the kinetics depends on [Fe]/[Zr] ratio and is fastest when the [Fe]/[Zr] ratio is {approx}1.8. X-ray diffraction analysis revealed formation of Fe nanoclusters and Mg grain refinement. The improvement of the hydrogen desorption kinetics can be explained by the presence of atomically dispersed Zr and Fe nanoclusters acting as nucleation centers, as well as Mg grain refinement.

36 MATERIALS SCIENCE↗

Extracting the effective mass of electrons in transparent conductive oxide thin films using Seebeck coefficient

A method is proposed that combines Seebeck coefficient and carrier concentration to determine the electron effective mass of transparent conductive oxide (TCO) thin films. Experiments were conducted to test the validity of this approach on the transparent conductive Ga-doped ZnO thin films deposited by magnetron sputtering. An evident agreement of the calculated electron effective mass of the films is observed between the proposed approach and the previous studies. Besides, the optical carrier concentration and mobility derived from the calculated electron effective mass and spectroscopic ellipsometry using a complex dielectric function are consistent with those from direct Hall-effect measurement. The agreements suggest that Seebeck coefficient can serve as an alternative tool for extracting the effective mass of electrons in TCO films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly textured Sr, Nb co-doped BiFeO{sub 3} thin films grown on SrRuO{sub 3}/Si substrates by rf- sputtering

In this study, (011)-highly oriented Sr, Nb co-doped BiFeO{sub 3} (BFO) thin films were successfully grown on SrRuO{sub 3}/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of {approx_equal}5.3 nm and average grain sizes of {approx_equal}65-70 nm for samples with different thicknesses. Remanent polarization values (2P{sub r}) of 54 {mu}C cm{sup -2} at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe{sup 3+}/Fe{sup 2+} trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/SrRuO{sub 3}/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness.

36 MATERIALS SCIENCE↗

Identification of B-K near edge x-ray absorption fine structure peaks of boron nitride thin films prepared by sputtering deposition

Four {pi}{sup *} resonance peaks were observed in the B-K near edge x-ray absorption fine structure spectra of boron nitride thin films prepared by magnetron sputtering. In the past, these peaks have been explained as the K-absorption of boron atoms, which are present in environment containing nitrogen vacancies, the number of which is 1-3 corresponding to the three peaks at higher photon energy. However, the authors found that there was a strong correlation between the intensities of these three peaks and that of O-K absorption after wide range scanning and simultaneous measurement of nitrogen and oxygen K-absorptions of the BN films. Therefore, the authors conclude that these three peaks at the higher energy side correspond to boron atoms bound to one-to-three oxygen atoms instead of three nitrogen atoms surrounding the boron atom in the h-BN structure. The result of the first-principles calculation with a simple cluster model supported the validity of this explanation.

36 MATERIALS SCIENCE↗

High quality ZnO:Al transparent conducting oxide films synthesized by pulsed filtered cathodic arc deposition

Aluminum-doped zinc oxide, ZnO:Al or AZO, is a well-known n-type transparent conducting oxide with great potential in a number of applications currently dominated by indium tin oxide (ITO). In this study, the optical and electrical properties of AZO thin films deposited on glass and silicon by pulsed filtered cathodic arc deposition are systematically studied. In contrast to magnetron sputtering, this technique does not produce energetic negative ions, and therefore ion damage can be minimized. The quality of the AZO films strongly depends on the growth temperature while only marginal improvements are obtained with post-deposition annealing. The best films, grown at a temperature of about 200?C, have resistivities in the low to mid 10-4 Omega cm range with a transmittance better than 85percent in the visible part of the spectrum. It is remarkable that relatively good films of small thickness (60 nm) can be fabricated using this method.

36 MATERIALS SCIENCE↗