Search NASA⌕ Search

SEARCH · Search NASA

Results for “Machine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Machine-aided analysis of land use - Landform relations from ERTS-1 MSS imagery, Sand Hills Region, Nebraska

Machine-aided analysis of ERTS-1 MSS data obtained over the Sand Hills of Nebraska indicates that reasonably accurate soils maps can be produced automatically. An interpretation of spectral class spatial distribution and statistical character allows confident assignment of familiar soil and cover type names to computer classes. Resultant computer classification maps are displayed on a television screen or printer image. Correlation between computer maps and the USDA soils map of the same area is high. Geographic distribution of classes of interest can be accentuated by automatic methods. Percentages of cover type for any classified area also can be obtained. Interpretation of machine maps yields information concerning land use, physiographic, soil, and hydrologic patterns of the region.

Sinnock, S.↗
NASA NTRS1975

Auxiliary propulsion thruster performance with ion machined accelerator grids

A substantial improvement in the performance of an 8-centimeter-diameter auxiliary propulsion thruster has been achieved by reducing the diameter of the accelerator grid apertures. The accelerator grid hole geometry has been defined by ion machining accelerator grids on an 8-centimeter thruster at thrust levels of 2.2, 4.4, and 6.7 millinewtons (mN). A thruster with an ion machined accelerator grid has been operated at a thrust of 4.4 mN for 1000 hours. The discharge propellant utilization was 92% at an eV/ion of 338. Thruster performance and accelerator grid hole geometry has been documented as a function of thrust level. It was also determined that the small hole accelerator grid has a very low backstreaming voltage limit. In fact the thruster can be operated with the accelerator grid held at neutralizer tip potential.

Hudson, W. R.↗
NASA NTRS1975

Machine processing of S-192 and supporting aircraft data: Studies of atmospheric effects, agricultural classifications, and land resource mapping

Two tasks of machine processing of S-192 multispectral scanner data are reviewed. In the first task, the effects of changing atmospheric and base altitude on the ability to machine-classify agricultural crops were investigated. A classifier and atmospheric effects simulation model was devised and its accuracy verified by comparison of its predicted results with S-192 processed results. In the second task, land resource maps of a mountainous area near Cripple Creek, Colorado were prepared from S-192 data collected on 4 August 1973.

Thomson, F.↗
NASA NTRS1976

Sample preparation of metal alloys by electric discharge machining

Electric discharge machining was investigated as a noncontaminating method of comminuting alloys for subsequent chemical analysis. Particulate dispersions in water were produced from bulk alloys at a rate of about 5 mg/min by using a commercially available machining instrument. The utility of this approach was demonstrated by results obtained when acidified dispersions were substituted for true acid solutions in an established spectrochemical method. The analysis results were not significantly different for the two sample forms. Particle size measurements and preliminary results from other spectrochemical methods which require direct aspiration of liquid into flame or plasma sources are reported.

Chapman, G. B., II↗
NASA NTRS1975

Quantification of geologic lineaments by manual and machine processing techniques

A study was conducted to investigate the effect of operator variability and subjectivity in lineament mapping and to examine methods to minimize or eliminate these problems by use of several machine preprocessing methods. LANDSAT scenes from the Anadarko Basin of Oklahoma and the Colorado Plateau were analyzed as test cases. Four geologists mapped lineaments on an Anadarko Basin scene, using transparencies of MSS bands 4-7, and their results are compared statistically. The total number of fractures mapped by the operators and their average lengths varied considerably, although comparison of lineament directions revealed some consensus. A summary map (785 linears) produced by overlaying the maps generated by the four operators showed that only 0.4% were recognized by all four operators, 4.7% by three, 17.8% by two and 77% by one operator. Two methods of machine aided mapping were tested, both simulating directional filters. One consists of computer (digital) processing of CCTs using edge enhancement algorithms, the other employs a television (analog) scanning of an image transparency which superimposes the original image and one offset in the direction of the scan line.

Podwysocki, M. H.↗
NASA NTRS1975

A life study of ausforged, standard forged, and standard machined AISI M-50 spur gears

Tests were conducted at 350 K with three groups of 8.9 cm pitch diameter spur gears made of vacuum-induction melted (VIM), vacuum-arc remelted (VAR), AISI M-50 steel and one group of vacuum-arc remelted (VAR) AISI 9310 steel. The pitting fatigue life of the standard forged and ausforged gears was approximately five times that of the VAR AISI 9310 gears and ten times that of the bending fatigue life of the standard machined VIM-VAR AISI M-50 gears run under identical conditions. There was a slight decrease in the 10-percent life of the ausforged gears from that for the standard forged gears. However, the difference is not statistically significant. The standard machined gears failed primarily by gear tooth fracture while the forged and ausforged VIM-VAR AISI M-50 and the VAR AISI 9310 gears failed primarily by surface pitting fatigue. The ausforged gears had a slightly greater tendency to fail by tooth fracture than the standard forged gears.

Townsend, D. P.↗
NASA NTRS1977

Machine for use in monitoring fatigue life for a plurality of elastomeric specimens

An improved machine is described for use in determining the fatigue life for elastomeric specimens. The machine is characterized by a plurality of juxtaposed test stations, specimen support means located at each of the test stations for supporting a plurality of specimens of elastomeric material, and means for subjecting the specimens at each of said stations to sinusoidal strain at a strain rate unique with respect to the strain rate at which the specimens at each of the other stations is subjected to sinusoidal strain.

Fitzer, G. E.↗
NASA NTRS1976

Classification and machine recognition of severe weather patterns

Forecasting and warning of severe weather conditions are treated from the vantage point of pattern recognition by machine. Pictorial patterns and waveform patterns are distinguished. Time series data on sferics are dealt with by considering waveform patterns. A severe storm patterns recognition machine is described, along with schemes for detection via cross-correlation of time series (same channel or different channels). Syntactic and decision-theoretic approaches to feature extraction are discussed. Active and decayed tornados and thunderstorms, lightning discharges, and funnels and their related time series data are studied.

Wang, P. P.↗
NASA NTRS1981

Cleaving machine for hard crystals

Hard crystalline materials such as lithium fluoride (LiF) are cleaved in thin sections by semiautomatic machine. Yield of undistorted LiF crystals is almost 100 percent, even when cleaved section is only 1/32 inch thick. Machine contains spring-activated hammer that limits penetration of blade and controls shock that cleaves crystal. Fixture with spring-loaded clamps precisely locates and holds crystal, restraining it in ideal position for cleaving. Crystal then splays apart.

Benedicto, J. S. J.↗
NASA NTRS1979

Machine intelligence and robotics: Report of the NASA study group. Executive summary

A brief overview of applications of machine intelligence and robotics in the space program is given. These space exploration robots, global service robots to collect data for public service use on soil conditions, sea states, global crop conditions, weather, geology, disasters, etc., from Earth orbit, space industrialization and processing technologies, and construction of large structures in space. Program options for research, advanced development, and implementation of machine intelligence and robot technology for use in program planning are discussed. A vigorous and long-range program to incorporate and keep pace with state of the art developments in computer technology, both in spaceborne and ground-based computer systems is recommended.

Source record↗
NASA NTRS1982

Technique for Machining Glass

Process for machining glass with conventional carbide tools requires a small quantity of a lubricant for aluminum applied to area of glass to be machined. A carbide tool is then placed against workpiece with light pressure. Tool is raised periodically to clear work of glass dust and particles. Additional lubricant is applied as it is displaced.

Rice, S. H.↗
NASA NTRS1980

The hammer QSD-quick stop device for high speed machining and rubbing

A quick stop device (QSD) was designed for use in orthogonal machining and rubbing experiments. QSD's are used to obtain chip root samples that are representative of the deformation taking place during dynamic (actual) cutting conditions. These 'frozen' specimens are helpful in examining the plastic deformation that occurs in the regions of compression and shear which form the chip; the secondary shear at the tool-chip interface; and the nose ploughing/flank rubbing action which operates on the newly machined surface. The Hammer QSD employs a shear pin mechanism, broken by a flying hammer, which is traveling at the same velocity as the workpiece. The device has been successfully tested up to 6000 sfpm (30.48 m/sec).

Black, J. T.↗
NASA NTRS1982

General Theory of the Double Fed Synchronous Machine

Motor and generator operation of a double-fed synchronous machine were studied and physically and mathematically treated. Experiments with different connections, voltages, etc. were carried out. It was concluded that a certain degree of asymmetry is necessary for the best utilization of the machine.

El-Magrabi, M. G.↗
NASA NTRS1982

Documentation for the machine-readable version of the Luminous Stars in the Northern Milky Way

A machine-readable version of a catalogue, Luminuous Stars in the Northern Milky Way, which contains all stars of six source publications in a single file is described. Files containing lists in order of their publication and sorted by right ascension are included in the computerized catalogue. Additional details regarding the program, instrumentation, spectral classification and determinations of magnitudes and positions are given in the source publications. This document was designed to be distributed with any machine-readable version of the catalogue

Warren, W. H., Jr.↗
NASA NTRS1982

Documentation for the machine-readable version of the catalog of galactic O type stars

The Catalog of Galactic O-Type Stars (Garmany, Conti and Chiosi 1982), a compilation from the literature of all O-type stars for which spectral types, luminosity classes and UBV photometry exist, contains 765 stars, for each of which designation (HD, DM, etc.), spectral type, V, B-V, cluster membership, Galactic coordinates, and source references are given. Derived values of absolute visual and bolometric magnitudes, and distances are included. The source reference should be consulted for additional details concerning the derived quantities. This description of the machine-readable version of the catalog seeks to enable users to read and process the data with a minimum of guesswork. A copy of this document should be distributed with any machine readable version of the catalog.

Warren, W. H., Jr.↗
NASA NTRS1982

The finite element machine: An experiment in parallel processing

The finite element machine is a prototype computer designed to support parallel solutions to structural analysis problems. The hardware architecture and support software for the machine, initial solution algorithms and test applications, and preliminary results are described.

Storaasli, O. O.↗
NASA NTRS1982

the finite element machine: An experiment in parallel processing

The Finite Element Machine at the NASA Langley Research Center is a prototype computer designed to support parallel solutions to structural analysis problems. The hardware architecture and support software for the machine, initial solution algorithms and test applications, and preliminary results are described. Directions for future work are presented.

Storaasli, O. O.↗