Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Effect of Heat Treatment Conditions on Properties of Lead-Free Bi{sub 2}GeO{sub 5} Ferroelectric Glass Ceramics

Nowadays, lead-free ferroelectric materials have attracted much interest among materials scientists as a result of environmental concern. The bismuth germanate (Bi{sub 2}GeO{sub 5}) phase, one of the lead-free ferroelectric crystals, is of particular interest as its composition already contains good glass former (GeO{sub 2}) and can be prepared by an alternative glass ceramic route. In this work, the conventional melt-quenching method was used to produce the parent glass with composition of 60 mol% BiO{sub 1.5}:20 mol% GeO{sub 2}:20 mol% BO{sub 1.5}. The as-received glass pieces were subjected to the heat treatment schedule at various crystallization temperatures and dwell-times. The glass and glass ceramics samples were then investigated by XRD, Raman spectroscopy and their dielectric properties were also measured. The XRD and Raman spectroscopy showed that the crystallinity of the prepared glass ceramics depended very much on crystallization temperature and dwell-time. The larger dielectric constant and lower dielectric loss were obtained as crystallinity of the glass ceramics enhanced. The highest dielectric constant (epsilon{sub r}) was found at 77 with a low dielectric loss of about 0.005.

36 MATERIALS SCIENCE↗

Phase transitions and electrical behavior of lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} thin film

Lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} (KNN) thin films with a high degree of (100) preferred orientation were deposited on the SrRuO{sub 3}-buffered SrTiO{sub 3}(100) substrate by off-axis radio frequency magnetron sputtering. They possess lower phase transition temperatures (T{sub o-t}approx120 deg. C and T{sub c}approx310 deg. C), as compared to those of KNN bulk ceramic (T{sub o-t}approx190 deg. C and T{sub c}approx400 deg. C). They also demonstrate enhanced ferroelectric behavior (e.g., 2P{sub r}=24.1 muc/cm{sup 2}) and fatigue endurance, together with a lower dielectric loss (tan deltaapprox0.017) and a lower leakage current, as compared to the bulk ceramic counterpart. Oxygen vacancies are shown to be involved in the conduction of the KNN thin film.

36 MATERIALS SCIENCE↗

Structure-property relationship of nanocrystalline Pr{sub 2}Co{sub 14}B-based hard magnetic film

Nanocrystalline Pr{sub 2}Co{sub 14}B-based films are deposited on two types of substrates at 600 deg. C by radio frequency magnetron sputtering. All samples are composed of a hard magnetic phase Pr{sub 2}Co{sub 14}B and a small amount of a soft magnetic phase Co{sub 3}B. The film sputtered on the thermally oxidized silicon wafer has a more dispersed distribution of Co{sub 3}B and a smaller average grain size of Pr{sub 2}Co{sub 14}B than that deposited on alumina substrates; therefore, the former film shows a stronger intergrain exchange coupling action (IECA) than the latter film. In addition, the coercivity (8.6 kOe) and ratio (0.68) of remanence to saturation magnetization of the film sputtered on thermally oxidized silicon wafers are considerably higher than those (0.4 kOe and 0.56) of the film deposited on alumina substrates. In the case of the film sputtered on alumina substrates, the size of most magnetic domains is comparable to the average grain size of magnetic phases, implying the occurrence of a weak IECA. However, in the case of the film sputtered on thermally oxidized silicon wafers, the size of most magnetic domains is considerably larger than the mean grain size of magnetic phases, indicating the occurrence of a strong IECA. The effect of the IECA on the coercivity of specimens is determined by analyzing the temperature dependence of coercivity in the framework of a nucleation model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Piezoelectric analysis of reactively grown PbTiO{sub 3}

We have investigated a technique that is a combination of sputtering, evaporation, and annealing for the production of thin film and nanostructured PbTiO{sub 3} that we show to be piezoelectric via piezoresponse force microscopy (PFM). The synthesis technique involved depositing lead, via thermal evaporation, onto the surface of a variety of substrates that had Ti as the uppermost layer, followed by conventional or rapid thermal annealing in air to form PbTiO{sub 3}. By careful control of the deposition time, samples ranging from discrete nanoislands to thin films could be produced. The nanoisland samples while exhibiting a piezoelectric response displayed little or no domain structure even with grains as large as 100 nm in diameter. However, we see a domain pattern in the thin film samples. We show that there are difficulties in poling PbTiO{sub 3} thin films using PFM due to the high coercive field required and the number of shorts through the thin films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Zr concentration on conductivity behavior of (1-x)PMN-xPZ ceramic: An impedance spectroscopy analysis

Impedance spectroscopy study was carried out on Pb[Mg{sub (1-x)/3}Nb{sub 2(1-x)/3}Zr{sub x}]O{sub 3} for x=0.10, 0.20, and 0.30 in the frequency range 100 Hz-1 MHz and temperature range 498-723 K. The activation energies obtained for the conduction increase with an increase in Zr{sup 4+} content. A significant decrease in the electrical conductivity was observed by an increase in Zr{sup 4+} substitution. The conduction mechanism in PMN-PZ is attributed to the migration of doubly ionized oxygen vacancies. These results are explained in terms of lowering the structural disorder in PMN by Zr{sup 4+} substitution.

36 MATERIALS SCIENCE↗

Effect of deposition temperature of TiO{sub 2} on the piezoelectric property of PbTiO{sub 3} film grown by PbO gas phase reaction sputtering.

A 17 nm thick PbTiO{sub 3} (PTO) films were fabricated via PbO gas phase reaction with TiO{sub 2} starting layer in a sputtering chamber. The influence of deposition temperature of TiO{sub 2} on the piezoelectric properties of PTO thin films was investigated. The remnant piezoresponse of PTO films nonlinearly increased as a function of TiO{sub 2} deposition temperature, which is correlated with the increase in average grain diameter of PTO film. As grain size increases, the restriction on remnant piezoresponse imposed by the grain boundary via coupling between local strain and polarization becomes less pronounced, which results in the increase in remnant piezoresponse. Furthermore, we found that the vertical shift in piezoresponse hysteresis loops is closely related to the residual stress state. A strong correlation between the negative vertical shift and the residual tensile stress reveals that residual stress on the resulting PTO film contributed to the asymmetric piezoelectric property.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Giant low frequency dielectric tunability in high-k Ba(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} ceramics at room temperature

The effect of electric field on the dielectric properties of high-k Ba(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} ceramics with different grain sizes is reported. A low frequency giant dielectric tunability (>85%) can be obtained under a bias field as low as 50 V/mm. The results suggest that the giant dielectric tunability originates from extrinsic contributions such as domain boundary and oxygen defect relaxations. These findings provide a clear understanding to the complicated dielectric response in a family of high-k ceramics and a key to the high tunability of nonferroelectrics under low electric fields, which is attractive for potential applications in tunable devices.

36 MATERIALS SCIENCE↗

Intrinsic and extrinsic relaxation of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics: Effect of sintering

The effect of sintering process on the electrical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) ceramic dielectrics were investigated in this paper. It was found that grain size is affected by sintering and the nonlinear current-voltage (I-V) property will decrease with the increased sintering time. Also, the frequency and temperature dependences of dielectric permittivity and loss in the ranges of 10{sup -1}-10{sup 7} Hz and 130-270 K were studied. Two relaxation processes with activation energy of 0.51 eV and 0.10 eV, respectively, were found in the frequency dependence of tan {delta} and Cole-Cole planes, which can be interpreted in terms of insulating grain boundaries and semiconducting grains. It was suggested that grain boundary Maxwell-Wagner relaxation and ionization of oxygen vacancy V{sub O}{sup ++}, proposed as extrinsic and intrinsic relaxations, are responsible for the dielectric behaviors of CCTO ceramics.

36 MATERIALS SCIENCE↗

Grain size effect on the nonlinear dielectric properties of barium titanate ceramics

The nonlinear dielectric properties of dense BaTiO{sub 3} ceramics with grain size of 1 {mu}m-90 nm were investigated. In the finest ceramics, the permittivity reduces below 1000 and a remarkable nonhysteretic linear dc-tunability [{epsilon}(E)] is obtained at high field, above 40 kV/cm. The observed behavior was explained by considering the nanostructured ceramic as a composite formed by ferroelectric grains, whose nonlinearity is reducing, and by low-permittivity nonferroelectric grain boundaries, whose volume fraction increases when decreasing the grain size. Reducing the grain size in ferroelectric dense materials is an alternative route to accomplish the application requirements: nonhysteretic tunability and permittivity below 1000.

36 MATERIALS SCIENCE↗

Fabrication of L1{sub 0}-ordered FePt granular media using an in-line sputtering system

FePtAg-SiO{sub 2} granular films were fabricated using an in-line sputtering system with a composite alloy target. Two heating methods were investigated in consideration of practical manufacturing processes. Structural analyses showed that the FePtAg-SiO{sub 2} film had better L1{sub 0} ordered structure and clearer grain boundaries when deposited on the preheated substrate than when annealed after deposition. Adding Ag improved both the L1{sub 0} ordering and the face centered tetragonal (001) texture. Torque magnetometry indicated that the FePtAg-SiO{sub 2} film had a uniaxial perpendicular anisotropy of 1.4 x 10{sup 7} (erg/cc) at an ordering parameter S of 0.72.

36 MATERIALS SCIENCE↗

Double hysteresis loop induced by defect dipoles in ferroelectric Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} thin films

Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} (PZT80/20) thin films were deposited on the Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by RF magnetron sputtering. Mainly perovskite crystalline phase with highly (202)-preferred orientation, determined by x-ray diffraction, was formed in the lead zirconate titanate (PZT)(80/20) thin films. Polarization measurements of the unannealed and aged films showed a clear double hysteresis loop. However, the double hysteresis loop phenomenon was greatly suppressed in the PZT thin films annealed under pure oxygen, and thus they exhibited larger remnant polarization (P{sub r} = 6.3 {mu}C/cm{sup 2}). The related mechanism for the appearance of constricted and double hysteresis loops was investigated to be associated with the realignment and disassociation of defect dipoles via oxygen octahedral rotations or oxygen vacancy diffusion. The butterfly-shaped C-V characteristic curve with a valley gave further evidence for double hysteresis loop characteristic in the unannealed and aged PZT thin films.

36 MATERIALS SCIENCE↗

Effect of temperature and time on properties of spark plasma sintered NiCuZn: Co ferrite

Spark plasma sintering is a powerful method to produce fine grain dense ferrite at low temperature. However the process, usually conducted in neutral atmosphere in a carbon die, yields carbon surface deposition and the reduction of Fe{sup 3+} into Fe{sup 2+}. It is shown that subsequent annealing in air can remove carbon and under some conditions produce complete oxidation of Fe{sup 2+} ions. Regular values of the resistivity and permittivity (resp., 1 M{Omega}m, 13 {epsilon}{sub 0}) are recovered for most samples annealed at temperatures not higher than 750 deg. C. A relatively high value of the permeability (up to 240) and a high merit factor ({mu}{sub s}xf{sub r}>5 GHz) have been achieved.

36 MATERIALS SCIENCE↗

Anisotropy induced large exchange bias behavior in ball milled Ni-Co-Mn-Sb alloys

We report the effect of decrease in the grain size on the structural, magnetic and exchange bias (EB) behavior in ball milled Ni{sub 50-x}Co{sub x}Mn{sub 38}Sb{sub 12} (x=0 and 5) Heusler alloys. The existence of a wide range of grain sizes in the ball milled samples results in dramatic changes in the structural and magnetic properties. For x=0, a large EB field of 3.2 kOe is observed in the ball milled sample, compared to a value of 245 Oe of the bulk sample. This increase is attributed to the enhanced exchange coupling between the soft and hard magnetic particles.

36 MATERIALS SCIENCE↗

Dielectric Relaxation In Complex Perovskite Sm(Ni{sub 1/2}Ti{sub 1/2})O{sub 3}

The complex perovskite oxide Samarium nickel titenate, Sm(Ni{sub 1/2}Ti{sub 1/2})O{sub 3}(SNT) is synthesized by a solid-state reaction technique. The X-ray diffraction of the sample at room temperature shows a monoclinic phase. The scanning micrograph of the sample shows the average grain size{approx_equal}0.6{mu}m The field dependence of dielectric response and the loss tangent of the sample are measured in a frequency range from 100Hz to 1MHz and in a temperature range from 313 K to 673 K. An analysis of the real and imaginary parts of the dielectric permittivity with frequency is performed, assuming a distribution of relaxation times as confirmed by Cole-Cole plots. The frequency dependent electrical data are analyzed in the framework of conductivity formalism. The frequency dependent conductivity data are fitted to the universal power law. All these formalisms provided for qualitative similarities in the relaxation times.

36 MATERIALS SCIENCE↗

Application of Rietveld Method to the Structural Characteristics of some Bulk and Nanocrystalline Materials

In recent years, the full pattern structure refinement using Rietveld Method, with the advent of increased performance of powder diffractometers has allowed enormous progress in the analysis of powder diffraction data. In the full pattern structure refinement, with the possibility of varying peak shape parameters and site occupancies along with the structural and instrumental parameters, provides information not only on the crystal and magnetic structure, but also gives precise knowledge of the particle size and micro-structural strain. In this report Rietveld profile refinement of some bulk and nano crystalline materials has been presented.

36 MATERIALS SCIENCE↗

Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits

Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel phase of carbon, ferromagnetism, and conversion into diamond

We report the discovery of a new phase of carbon (referred to as Q-carbon) and address fundamental issues related to direct conversion of carbon into diamond at ambient temperatures and pressures in air without any need for catalyst and presence of hydrogen. The Q-carbon is formed as result of quenching from super undercooled state by using high-power nanosecond laser pulses. We discuss the equilibrium phase diagram (P vs. T) of carbon and show that by rapid quenching kinetics can shift thermodynamic graphite/diamond/liquid carbon triple point from 5000 K/12 GPa to super undercooled carbon at atmospheric pressure in air. It is shown that nanosecond laser heating of diamond-like amorphous carbon on sapphire, glass, and polymer substrates can be confined to melt carbon in a super undercooled state. By quenching the carbon from the super undercooled state, we have created a new state of carbon (Q-carbon) from which nanodiamond, microdiamond, microneedles, and single-crystal thin films are formed depending upon the nucleation and growth times allowed for diamond formation. The Q-carbon quenched from liquid is a new state of solid carbon with a higher mass density than amorphous carbon and a mixture of mostly fourfold sp{sup 3} (75%–85%) with the rest being threefold sp{sup 2} bonded carbon (with distinct entropy). It is expected to have new and improved mechanical hardness, electrical conductivity, chemical, and physical properties, including room-temperature ferromagnetism (RTFM) and enhanced field emission. Here we present interesting results on RTFM, enhanced electrical conductivity and surface potential of Q-carbon to emphasize its unique properties. The Q-carbon exhibits robust bulk ferromagnetism with estimated Curie temperature of about 500 K and saturation magnetization value of 20 emu g{sup −1}. From the Q-carbon, diamond phase is nucleated and a variety of micro- and nanostructures and large-area single-crystal diamond sheets are grown by allowing growth times as needed. Subsequent laser pulses can be used to grow nanodiamond into microdiamond and nucleate other nanostructures of diamond on the top of existing microdiamond and create novel nanostructured materials. The microstructural details provide insights into the mechanism of formation of nanodiamond, microdiamond, nanoneedles, microneedles, and single-crystal thin films. This process allows carbon-to-diamond conversion and formation of useful nanostructures and microstructures at ambient temperatures in air at atmospheric pressure on practical and heat-sensitive substrates in a controlled way without need for any catalysts and hydrogen to stabilize sp{sup 3} bonding for diamond formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microcavity array IR photodetector

An original microcavity array IR photodetector is proposed and the sensitivity and response time of its pixels are calculated. A photosensitive element represents a composite silicon microcavity made of two optically coupled closed waveguides on a dielectric substrate whose resonance wave depends on its temperature. This dependence is used to detect IR radiation which heats an absorbing element and the composite microcavity thermally coupled with this element. It is shown that for a spatial resolution of 45 {mu}m, the time response is 30 ms and the sensitivity is 10{sup -3} K at the IR radiation power of {approx} 4.7 x 10{sup -8} W element{sup -1}. (photodetectors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗