Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Entanglement Purification and Protection in a Superconducting Quantum Network

High-fidelity quantum entanglement is a key resource for quantum communication and distributed quantum computing, enabling quantum state teleportation, dense coding, and quantum encryption. Any sources of decoherence in the communication channel, however, degrade entanglement fidelity, thereby increasing the error rates of entangled state protocols. Entanglement purification provides a method to alleviate these nonidealities by distilling impure states into higher-fidelity entangled states. In this work, we demonstrate the entanglement purification of Bell pairs shared between two remote superconducting quantum nodes connected by a moderately lossy, 1-meter long superconducting communication cable. We use a purification process to correct the dominant amplitude damping errors caused by transmission through the cable, with fractional increases in fidelity as large as 25%, achieved for higher damping errors. The best final fidelity the purification achieves is 94.09 ± 0.98%. In addition, we use both dynamical decoupling and Rabi driving to protect the entangled states from local noise, increasing the effective qubit dephasing time by a factor of 4, from 3 to 12 μs. These methods demonstrate the potential for the generation and preservation of very high-fidelity entanglement in a superconducting quantum communication network.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Ab-initio study of thermoelectric properties of Mg{sub 2}Ge

In this paper we investigate the thermoelectric properties of Mg{sub 2}Ge material using first principles pseudo potential method based on density functional theory and Boltzmann transport equations. The calculations show n-type conduction, indicating that the electrical conduction is due to electron. The electrical conductivity decrease with temperature; the negative value of Seebeck Coefficient also shows that the conduction is due to electron. In this paper we have calculated Seebeck coefficient, electrical conductivity and thermal conductivity. The thermoelectric properties of system have been calculated in this temperature range 100 K-1200 K. The value of Figure of Merit (ZT) of this material is also increasing with temperature and maximum value is 4.58×10{sup −5}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Fabrication, characterization and applications of iron selenide

This review article presents fabrication of FeSe by solid state reactions, solution chemistry routes, chemical vapor deposition, spray pyrolysis and chemical vapor transport. Different properties and applications such as crystal structure and phase transition, band structure, spectroscopy, superconductivity, photocatalytic activity, electrochemical sensing, and fuel cell activity of FeSe have been discussed. - Graphical abstract: Iron selenide can be synthesized by solid state reactions, chemical vapor deposition, solution chemistry routes, chemical vapor transport and spray pyrolysis. - Highlights: • Different fabrication methods of iron selenide (FeSe) have been reviewed. • Crystal structure, band structure and spectroscopy of FeSe have been discussed. • Superconducting, catalytic and fuel cell application of FeSe have been presented.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Growth and characterization of HgBa 2 CaCu 2 O 6+δ and HgBa 2 Ca 2 Cu 3 O 8+δ crystals

We report the successful growth of sizable crystals of the cuprate superconductors HgBa 2 CaCu 2 O 6+δ and HgBa 2 Ca 2 Cu 3 O 8+δ . These compounds are well known for their high optimal superconducting critical temperatures of T c = 128 K and 134 K at ambient pressure, respectively, and for their challenging synthesis. Using a conventional quartz-tube encapsulation method and a two-layer encapsulation method that utilizes custom-built high-pressure furnaces, we are able to grow single crystals with linear dimensions up to several millimeters parallel to the CuO 2 planes. Extended postgrowth annealing is shown to lead to sharp superconducting transitions, indicative of high macroscopic homogeneity. X-ray diffraction and polarized Raman spectroscopy are identified as viable nondestructive methods to help separate the two compounds from synthesis products, as the latter often contain intergrowths of the former. Furthermore, our work helps to remove obstacles toward the study of these model cuprate systems with experimental probes that require sizable high-quality crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Design and Validation of a Cryogenic Dilatometer

This project focuses on the design and development of a cryogenic dilatometer capable of measuring the thermal expansion of materials at extremely low temperatures. Understanding how materials change dimension with temperature is critical for applications involving cryogenic environments, particularly laminated systems housing superconducting magnets, where small dimensional changes can significantly affect performance and reliability. To address this, a dilatometer system was designed to operate within a liquid nitrogen environment while accurately measuring displacements caused by thermal contraction. The purpose of this device is to determine the coefficient of thermal expansion (CTE) of a material. The design process involved defining functional requirements, developing mechanical and thermal concepts for the measurement apparatus, selecting appropriate materials compatible with cryogenic temperatures, and integrating sensors capable of detecting small dimensional changes. The resulting system aims to provide a practical and repeatable method for evaluating material thermal expansion at cryogenic temperatures, supporting research into composite use in superconducting applications that require accurate characterization of material behavior in low-temperature environments.

Schmitt, Nicholas [Northern Illinois U.]↗
DOE OSTI2019

Structural and superconducting properties of Nb 3 Sn films grown by multilayer sequential magnetron sputtering

Nb 3 Sn thin films are fabricated by sequential sputtering followed by annealing at 850–1200°C in vacuum. The effects of the annealing temperature and time on the formation of Nb 3 Sn were examined. The film crystal structure, morphology, surface topography and composition were distinguished by X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and energy dispersive X-ray spectroscopy analysis. The superconducting properties of the films were characterized by measuring the surface resistivity by the four-point probe method. The highest critical temperature T c = 17.86 K was observed for the Nb 3 Sn films annealed at 950°C for 3 h. When the films were annealed above 1000°C for 3 h, Sn evaporation resulted in a Nb-rich film, degrading the superconducting performance. Annealing at 1200°C for 3 h resulted in evaporation of Sn leaving less than 1% Sn on the surface, as detected by energy dispersive spectroscopy, and for that film a T c of 7.9 K was observed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tensor train continuous time solver for quantum impurity models

The simulation of strongly correlated quantum impurity models is a significant challenge in modern condensed matter physics that has multiple important applications. Thus far, the most successful methods for approaching this challenge involve Monte Carlo techniques that accurately and reliably sample perturbative expansions to any order. However, the cost of obtaining high precision through these methods is high. Recently, tensor train decomposition techniques have been developed as an alternative to Monte Carlo integration. In this study, we apply these techniques to the single-impurity Anderson model at equilibrium by calculating the systematic expansion in power of the hybridization of the impurity with the bath. Furthermore, we demonstrate the performance of the method in a paradigmatic application, examining the first-order phase transition on the infinite-dimensional Bethe lattice, which can be mapped to an impurity model through dynamical mean field theory. Our results indicate that using tensor train decomposition schemes allows the calculation of finite-temperature Green's functions and thermodynamic observables with unprecedented accuracy. The methodology holds promise for future applications to frustrated multiorbital systems, using a combination of partially summed series with other techniques pioneered in diagrammatic and continuous time quantum Monte Carlo.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Spin echo small-angle neutron scattering using superconducting magnetic Wollaston prisms

Here, we show the implementation of superconducting magnetic Wollaston prisms for spin echo small-angle neutron scattering. Two calibration methods for the spin echo length are presented: one utilizing spin echo modulated small-angle neutron scattering and the other based on the neutron refraction by quartz wedge crystals. Our experimental results with polystyrene nano-particle colloids showcase the system’s efficacy in measuring both dilute and concentrated colloidal systems. Additionally, investigations into the pore diameter and pitch of a nano-porous alumina membrane demonstrate its capability in analyzing nano-porous materials. Furthermore, we discuss potential optimizations to further extend the accessible spin echo length.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Observation of coherent optical phonons excited by femtosecond laser radiation in Sb films by ultrafast electron diffraction method

The generation of coherent optical phonons in a polycrystalline antimony film sample has been investigated using femtosecond electron diffraction method. Phonon vibrations have been induced in the Sb sample by the main harmonic of a femtosecond Ti:Sa laser (λ = 800 nm) and probed by a pulsed ultrashort photoelectron beam synchronized with the pump laser. The diffraction patterns recorded at different times relative to the pump laser pulse display oscillations of electron diffraction intensity corresponding to the frequencies of vibrations of optical phonons: totally symmetric (A{sub 1g}) and twofold degenerate (E{sub g}) phonon modes. The frequencies that correspond to combinations of these phonon modes in the Sb sample have also been experimentally observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Extended Range SRF Cavity Tuner for LCLS II HE Project

The off-frequency detune method is being considered to be applied in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously. To deliver off-frequency operation (OFO) requirements for SRF cavity tuner must be changed. Tuner design modifications and results of the testing eight cavity/tuner system, deployed in verification cryomodule (vCM), will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Magneto-electronic and Thermodynamic Properties of Quaternary NiFeMnZ (Z = In, Sn) New Spin Gapless Semiconductors

This paper deals with investigation of magneto-electronic and thermodynamic properties of new spin gapless semiconductor quaternary NiFeMnZ (Z = In, Sn) Heusler alloys. In addition, electronic properties such as band structure and density of states were studied in detail. The obtained results are based on first-principles calculations, using the full potential linearized augmented plane wave (FP-LAPW) method within well-known generalized gradient approximation (GGA) coupling with spin-orbit calculation (SOC) in framework of the density functional theory (DFT) implemented in the WIEN2k package. As results, the alloys were found to be new spin gapless semiconductors (SGSs), and both compounds in LiMgPdSn-type crystal structure are stable. The magnetic moment of NiFeMnIn and NiFeMnSn was 4.39 and 4.99 μ{sub B} per formula unit, respectively. This result is in agreement with the Slater-Pauling rule (M{sub tot} = 24 −Z{sub tot}). Furthermore, the thermodynamic properties were also predicted. All these multifunctionalities lead to crucial interest for developing future spintronics device generations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Second dome of superconductivity in YBa 2 Cu 3 O 7 at high pressure

Evidence is growing that a second dome of high-T c superconductivity can be accessed in the cuprates by increasing the doping beyond the first dome. Here, in this study, we use ab initio methods without invoking any free parameters, such as the Hubbard U, to reveal that pressure could turn YBa 2 ⁢Cu 3 ⁢O 7 into an ideal candidate for second dome superconductivity, displaying the predicted signature of strongly hybridized d x 2 -y 2 and d z 2 orbitals. Notably, pressure is found to induce a phase transition replacing the antiferromagnetic phases with an orbitally degenerate d-d phase. Our study suggests that the origin of the second dome is correlated with the oxygen-hole fraction in the CuO 2 planes and the collapse of the pseudogap phase.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Atomistic and Ab initio modeling of CaAl{sub 2}O{sub 4} high-pressure polymorphs under Earth’s mantle conditions

Semi-empirical and ab initio theoretical investigation of crystal structure geometry, interatomic distances, phase densities and elastic properties for some CaAl{sub 2}O{sub 4} phases under pressures up to 200 GPa was performed. Two independent simulation methods predicted the appearance of a still unknown super-dense CaAl{sub 2}O{sub 4} modification. In this structure, the Al coordination polyhedron might be described as distorted one with seven vertices. Ca atoms were situated inside polyhedra with ten vertices and Ca–O distances from 1.96 to 2.49 Å. It became the densest modification under pressures of 170 GPa (density functional theory prediction) or 150 GPa (semi-empirical prediction). Both approaches indicated that this super-dense CaAl{sub 2}O{sub 4} modification with a “stuffed α-PbO{sub 2}” type structure could be a probable candidate for mutual accumulation of Ca and Al in the lower mantle. The existence of this phase can be verified experimentally using high pressure techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Preparation and Studies of Thin Films of Cu-doped GdSr{sub 2}RuCu{sub 2}O{sub 8}

Preparation of superconducting thin films of the Cu-doped Ruthenocuprate superconductor GdSr{sub 2}Ru{sub 0.9}Cu{sub 2.1}O{sub 8} has been attempted by pulsed laser deposition method. Thin films were deposited on different substrates employing different laser ablation parameters with the idea of obtaining good-quality films which exhibit superconductivity. The crystal structure and morphology of the thin films were characterized by X-ray diffraction and scanning electron microscopy measurements and optical characteristics by Raman scattering measurements. High-temperature ex situ oxygen annealing led to the formation of homogeneous films with the occurrence of an onset of superconductivity, traced by electrical resistivity measurements. Increasing the annealing time has led to a systematic improvement in the sample quality and the physical properties. However, prolonged high-temperature annealing seems to cause deterioration in properties as seen from electrical resistivity and Raman scattering measurements. The studies reveal the importance of an optimal high-temperature oxygen annealing procedure to induce superconductivity in thin films of this Ruthenocuprate system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Crystal-Physical Model of Ion Transport in Nonlinear Optical Crystals of KTiOPO{sub 4}

The ionic conductivity along the principal axes a, b, and c of the unit cell of the nonlinear-optical high-resistance KTiOPO{sub 4} single crystals (rhombic syngony, space group Pna2{sub 1}), which are as-grown and after thermal annealing in vacuum, has been investigated by the method of impedance spectroscopy. The crystals were grown from a solution-melt by the Czochralski method. The as-grown KTiOPO{sub 4} crystals possess a quasi-one-dimensional conductivity along the crystallographic c axis, which is caused by the migration of K{sup +} cations: σ{sub ║c} = 1.0 × 10{sup –5} S/cm at 573 K. Wherein the characteristics of the anisotropy of ionic conductivity of the crystals is equal to σ{sub ║c}/σ{sub ║a}= 3 and σ{sub ║c}/σ{sub ║b}= 24. The thermal annealing at 1000 K for 10 h in vacuum increases the magnitude of σ{sub ║c} of KTiOPO{sub 4} by a factor of 28 and leads to an increase in the ratio σ{sub ║c}/σ{sub ║b}= 2.1 × 10{sup 3} at 573 K. A crystal-physical model of ionic transport in KTiOPO{sub 4} crystals has been proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Influence of Size Effects on the Electronic Structure of Hexagonal Gallium Telluride

Using methods of the density functional theory, the electronic band structure of a hexagonal modification of the layered GaTe semiconductor has been calculated. The structural parameters of a bulk crystal with the β-polytype symmetry have been determined taking into account van der Waals interactions and agree with experimental data for polycrystalline films within 2%. Estimates for the position of extrema of the upper valence band and the lower conduction band have been obtained with respect to the vacuum level for bulk β-GaTe and for ultrathin plates with the number of elementary layers ranging from 1 to 10, which corresponds to a thickness range of 0.5–8 nm. The calculations demonstrate that hexagonal GaTe is an indirect band gap semiconductor with a forbidden band width varying from 0.8 eV in the bulk material to 2.3 eV in the monolayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Multi-atom quasiparticle scattering interference for superconductor energy-gap symmetry determination

Complete theoretical understanding of the most complex superconductors requires a detailed knowledge of the symmetry of the superconducting energy-gap Δ$^α_k$, for all momenta k on the Fermi surface of every band α. While there are a variety of techniques for determining |Δ$^α_k$|, no general method existed to measure the signed values of Δ$^α_k$. Recently, however, a technique based on phase-resolved visualization of superconducting quasiparticle interference (QPI) patterns, centered on a single non-magnetic impurity atom, was introduced. In principle, energy-resolved and phase-resolved Fourier analysis of these images identifies wavevectors connecting all k-space regions where Δ$^α_k$ has the same or opposite sign. But use of a single isolated impurity atom, from whose precise location the spatial phase of the scattering interference pattern must be measured, is technically difficult. Here we introduce a generalization of this approach for use with multiple impurity atoms, and demonstrate its validity by comparing the Δ$^α_k$ it generates to the Δ$^α_k$ determined from single-atom scattering in FeSe where s ± energy-gap symmetry is established. Finally, to exemplify utility, we use the multi-atom technique on LiFeAs and find scattering interference between the hole-like and electron-like pockets as predicted for Δ$^α_k$ of opposite sign.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗