Search NASA⌕ Search

SEARCH · Search NASA

Results for “NASA Program Flight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

NIRVSS Aboard CLPS

NASA initiated the Commercial Lunar Payload Services (CLPS) program for flights to the lunar surface. Astrobotic was awarded a NASA contract to accommodate NASA payloads onto their Peregrine lander Astrobotic Mission One (ABM-1). ABM-1 is scheduled to land near Lacus Mortis, 44°N 25°E, in 2021. The Near-InfraRed Volatile Spectrometer System (NIRVSS) has evolved over time and was chosen as a NASA payload for ABM-1 and the flight model is scheduled to be delivered to Astrobotic at the end of March 2020.

Roush, T.L.↗

Next-Generation RS-25 Engines for the NASA Space Launch System

The utilization of heritage RS-25 engine, also known as the Space Shuttle Main Engine (SSME), has enabled rapid progress in the development and certification of the NASA Space Launch System (SLS) toward operational flight status. The RS-25 brings design maturity and extensive experience gained through 135 missions, 3000+ ground tests, and over a million seconds total accumulated hot-fire time. In addition, there were also over a dozen functional flight assets remaining from the Space Shuttle program that could be leveraged to support the first four flights. Beyond these initial SLS flights, NASA must have a renewed supply of RS-25 engines that must reflect program affordability imperatives as well as technical requirements imposed by the SLS Block-1B vehicle (i.e., 111% RPL power level, reduced service life). Recognizing the long lead times needed for the fabrication, assembly and acceptance testing of flight engines, design activities are underway at NASA and the RS-25 engine provider, Aerojet Rocketdyne, to improve system affordability and eliminate obsolescence concerns. This paper describes how the achievement of these key objectives are enabled largely by utilizing modern materials and fabrication technologies, but also by innovations in systems engineering and integration (SE&I) practices.

Ballard, Richard O.↗

Quarantine provisions for unmanned extra-terrestrial missions

This document sets forth requirements applicable to unmanned planetary flight programs which are necessary to enable the Associate Administrator for Space Science to fulfill those responsibilities pertaining to planetary quarantine as stated in NPD 8020.7 and NPD 8020.10A. This document is specifically directed to the control of terrestrial microbial contamination associated with unmanned space vehicles intended to encounter, orbit, flyby, or otherwise be in the vicinity of extra-terrestrial solar system bodies. The requirements of this document apply to all unmanned planetary flight programs. This includes solar system exploratory missions to the major planets as well as missions to planet satellites, or to other solar system objects that may be of scientific interest. This document is not applicable to terrestrial (including lunar) missions and manned missions. NASA officials having cognizance of applicable flight programs will invoke these requirements in such directives or contractual instruments as may be necessary to assure their implementation.

Source record↗

SHARP-B2: Flight Test Objectives, Project Implementation and Initial Results

On September 28, 2000 the SHARP-B2 flight experiment was launched from Vandenberg Air Force Base, California. SHARP-B2 is the 2nd Ballistic flight test in the SHARP (Slender Hypervelocity Aerothermodynamic Research Probes) program which develops and tests new thermal protection materials and sharp body concepts. The flight tested Ultra-High Temperature Ceramics (UHTCs), which may radically change the design and performance of future aerospace vehicles. The new designs may overturn an age-old tenet of aerodynamics: that blunt-body aerospace vehicles, but not those with sharp leading edges, can survive the searing temperatures created as the vehicles tear through the atmosphere. Sharp leading edges offer numerous advantages over the blunt-body design currently in use. They could allow a space shuttle or crew return vehicle to maneuver in space more like an airplane and potentially allow astronauts to return to Earth from anywhere on orbit. They may allow improved astronaut safety by decreasing the risk of aborting into the ocean. They may reduce the electromagnetic interference that causes the communications blackouts that plague reentering blunt-body space vehicles. Reducing the amount of drag could lead to a reduction in propulsion requirements. Planetary probes could make use of sharp-body technology for aerobraking and to maximize their maneuvering capability. SHARP-B2 was a joint effort among NASA Ames, Sandia National Laboratories, the U.S. Air Force and the U.S. Army. It was funded by the Pathfinder Program at NASA's Marshall Space Flight Center. The SHARP-B2 payload was carried aboard a U.S. Air Force Minuteman III missile carrying a modified Mk 12A reentry vehicle (RV), which blasted off from Vandenberg Air Force Base near Lompoc, CA, at 3:01 a.m. PDT on Sept. 28. The RV was equipped with four 5. 1 inch-long strakes, or sharp leading edges. Each strake contained three UHTCs: ZrB2/SiC/C; ZrB2/SiC; and HfB2/SiC. Once it reached an altitude of about 400 nautical miles, the RV was released, returning through Earth's atmosphere at speeds exceeding Mach 22. One pair of strakes was designed to retract just before reaching temperatures high enough to cause the material to begin ablating. The other pair was designed to retract shortly after ablation began, at an expected temperature of nearly 5,100 degrees Fahrenheit. Sensors in the strakes measured how closely performance matched pre-flight calculations, and data was successfully collected throughout the 23-minute flight. A parachute was deployed (but not fully inflated) and the RV splashed down in a lagoon at the Kwajalein missile range in the Pacific Ocean. Within 3 hours radar track analysis showed ocean entry to be precisely at the latitude/longitude coordinates estimated during pre-flight simulation. An hour later a ship was deployed by the Army to recover the reentry vehicle, which was recovered in 165 feet of water, just 500 feet from its planned splash-down point. This is the first RV recovery in over a decade.

Salute, Joan↗

The Flight Telerobotic Servicer Program

The Flight Telerobotic Servicer (FTS) Program, initiated by NASA to provide new capabilities for task accomplishment in the space environment, is described. The FTS Program includes the following: a series of test flights, a ground-based supporting infrastructure, and a technology utilization and transfer process. The FTS Program strives to reduce Space Station dependence on crew EVA, improve crew safety, enhance crew utilization, provide remote servicing capabilities for platforms, and accelerate technology transfer from research to U.S. industry.

Townsend, John W., Jr.↗

Performance of the NASA Airborne Radar with the Windshear Database for Forward-Looking Systems

This document describes the simulation approach used to test the performance of the NASA airborne windshear radar. An explanation of the actual radar hardware and processing algorithms provides an understanding of the parameters used in the simulation program. This report also contains a brief overview of the NASA airborne windshear radar experimental flight test results. A description of the radar simulation program shows the capabilities of the program and the techniques used for certification evaluation. Simulation of the NASA radar is comprised of three steps. First, the choice of the ground clutter data must be made. The ground clutter is the return from objects in or nearby an airport facility. The choice of the ground clutter also dictates the aircraft flight path since ground clutter is gathered while in flight. The second step is the choice of the radar parameters and the running of the simulation program which properly combines the ground clutter data with simulated windshear weather data. The simulated windshear weather data is comprised of a number of Terminal Area Simulation System (TASS) model results. The final step is the comparison of the radar simulation results to the known windshear data base. The final evaluation of the radar simulation is based on the ability to detect hazardous windshear with the aircraft at a safe distance while at the same time not displaying false alerts.

Switzer, George F.↗

Flight Manifesting Process for NASA Microgravity Payloads

The objective of NASA's Microgravity Research Program is to utilize the low gravity environment of space to explore the nature of physical phenomena that contributes to progress in science and technology on Earth. Under the oversight of NASA Headquarters, the Microgravity Research Program Office (MRPO) at the Marshall Space Flight Center (MSFC) assumes all program management responsibilities associated with Microgravity Research and Space Product Development. One program management responsibility that plays a vital role to the success of the MRPO is the flight manifesting process for MRPO-sponsored payloads. In this paper, the authors will examine the various processes utilized by MRPO personnel in acquiring flight opportunities for MRPO-sponsored payloads.

Matisak, Brian↗

Lessons Learned From the Flight of the NASA In-Step Cryo System Experiment

The Cryo System Experiment (CSE), a NASA In-Space Technology Experiments Program (IN- STEP) Flight Experiment, was developed by Hughes Aircraft Company under contract to the Jet Propulsion Laboratory (JPL) to validate in near zero-g space a 65 K cryogenic system for focal planes, optics, instruments, or other equipment (gamma-ray spectrometers, and infrared and submillimeter imaging instruments) that require continuous cryogenic cooling.

NASA↗

Developing space occupancy - Perspectives on NASA future space program planning

Potential future manned space flight missions for the time after the development of the space transportation system with the space shuttle are considered, taking into account a sequence of activities concerning a gradually increasing penetration of space by man. The activities are related to the permanent occupancy of near-earth space, the permanent occupancy of near-moon space, the full self-sufficiency of man in earth-moon space, and the permanent occupancy of heliocentric space. Attention is given to Mars orbiting stations, the exploration of the asteroids, comet exploration, planet engineering programs, heliocentric orbit installation, the evolution of the earth orbit space community, space industrialization technology, lunar base development, and evolutionary paths to far-future space endeavors.

Von Puttkamer, J.↗

The future of space flight

The history of the NASA space program is traced, and future plans are outlined. Projects discussed include Mercury, Gemini, Apollo, Skylab, Apollo-Soyuz, science-applications spacecraft (Ranger, Surveyor, Mariner, Pioneer, and Voyager), the Space Shuttle, the planned Space Station, orbital maneuvering vehicles, lunar bases, and planetary exploration. Numerous photographs and drawings are provided.

Moore, J. W.↗

Characterization of Polymer-Coated MEMS Humidity Sensors for Flight Applications

Under NASA's Aviation Safety Program (AvSP), in addition to wind velocity and temperature, water vapor is considered one key factor in determining aviation weather, which is a substantial contributor to many general aviation (GA) accidents. The conventional and reliable humidity measuring methods such as radiation reflection or absorption have relatively high cost in addition to highly specialized operating and maintenance characteristics. This paper presents characterizations of inexpensive MEMS and capacitance type humidity sensors for their potential use on aircraft. If installed, these sensors are subjected to ambient environmental conditions as well as to different chemicals and deicing fluids used on aircraft. This paper reports the effect of different deicing fluids and chemicals on these inexpensive humidity sensors.

Shams, Qamar A.↗

Control Room Training for the Hyper-X Program Utilizing Aircraft Simulation

The NASA Dryden Flight Research Center flew two Hyper-X Research Vehicles and achieved hypersonic speeds over the Pacific Ocean in March and November 2004. To train the flight and mission control room crew, the NASA Dryden simulation capability was utilized to generate telemetry and radar data, which was used in nominal and emergency mission scenarios. During these control room training sessions, personnel were able to evaluate and refine data displays, flight cards, mission parameter allowable limits, and emergency procedure checklists. Practice in the mission control room ensured that all primary and backup Hyper-X staff were familiar with the nominal mission and knew how to respond to anomalous conditions quickly and successfully. This paper describes the technology in the simulation environment and the mission control center, the need for and benefit of control room training, and the rationale and results of specific scenarios unique to the Hyper-X research missions.

Lux-Baumann, Jessica R.↗

Off-Nominal Event Analysis in Autonomous Flights Based on Explainable Artificial Intelligence

A key objective in the Urban Air Mobility program at NASA is to intelligently perform an autonomous flight in a complex urban environment under all weather conditions with guaranteed levels of safety. To accomplish this, the mission manager (central decision-making module) of the vehicle needs to make informed decisions between various Courses of Action (CoA) based on its' interpretation of the inputs it receives. If an off-nominal event is detected either based on the amalgamation of sensor data or the use of machine learning models, the mission manager may greatly benefit from identification of the input features that most likely contributed to that specific event. Such an understanding is usually not possible to obtain from the classical machine learning models (deep learning) due to the inherent black box like structure. However, this understanding is achieved using eXplainable Artificial Intelligence (XAI) models that provide a human interpretable rationale for the predictions made. This work presents a game theory inspired XAI model for the off-nominal assessment of autonomous flights. The proposed approach based on Shapley values is model agnostic, provides local as well as global explanation and satisfies the four axioms (efficiency, symmetry, dummy, additivity) to achieve fair contribution. The versatility of the approach is first demonstrated on a simulated dataset in which the significance of each input to flight phase prediction is clearly identified. Subsequently, data from simulated flight trajectories are fed into the model which reveal the input features that most likely contributed to a rotor failure event thereby empowering the mission manager to take the appropriate CoA.

autonomy↗

Off-Nominal Event Analysis in Autonomous Flights Based on Explainable Artificial Intelligence

A key objective in the Urban Air Mobility program at NASA is to intelligently perform an autonomous flight in a complex urban environment under all weather conditions with guaranteed levels of safety. To accomplish this, the mission manager (central decision-making module) of the vehicle needs to make informed decisions between various Courses of Action (CoA) based on its' interpretation of the inputs it receives. If an off-nominal event is detected either based on the amalgamation of sensor data or the use of machine learning models, the mission manager may greatly benefit from identification of the input features that most likely contributed to that specific event. Such an understanding is usually not possible to obtain from the classical machine learning models (deep learning) due to the inherent black box like structure. However, this understanding is achieved using eXplainable Artificial Intelligence (XAI) models that provide a human interpretable rationale for the predictions made. This work presents a game theory inspired XAI model for the off-nominal assessment of autonomous flights. The proposed approach based on Shapley values is model agnostic, provides local as well as global explanation and satisfies the four axioms (efficiency, symmetry, dummy, additivity) to achieve fair contribution. The versatility of the approach is first demonstrated on a simulated dataset in which the significance of each input to flight phase prediction is clearly identified. Subsequently, data from simulated flight trajectories are fed into the model which reveal the input features that most likely contributed to a rotor failure event thereby empowering the mission manager to take the appropriate CoA.

autonomy↗

NASA and the Future of Flight

Advance Air Vehicles Program (AAVP) introduction and future of flight presentation for Penn State University visit by AAVP program director.

AAVP Aeronautics PSU↗

Orion Guidance and Control Ascent Abort Algorithm Design and Performance Results

During the ascent flight phase of NASA s Constellation Program, the Ares launch vehicle propels the Orion crew vehicle to an agreed to insertion target. If a failure occurs at any point in time during ascent then a system must be in place to abort the mission and return the crew to a safe landing with a high probability of success. To achieve continuous abort coverage one of two sets of effectors is used. Either the Launch Abort System (LAS), consisting of the Attitude Control Motor (ACM) and the Abort Motor (AM), or the Service Module (SM), consisting of SM Orion Main Engine (OME), Auxiliary (Aux) Jets, and Reaction Control System (RCS) jets, is used. The LAS effectors are used for aborts from liftoff through the first 30 seconds of second stage flight. The SM effectors are used from that point through Main Engine Cutoff (MECO). There are two distinct sets of Guidance and Control (G&C) algorithms that are designed to maximize the performance of these abort effectors. This paper will outline the necessary inputs to the G&C subsystem, the preliminary design of the G&C algorithms, the ability of the algorithms to predict what abort modes are achievable, and the resulting success of the abort system. Abort success will be measured against the Preliminary Design Review (PDR) abort performance metrics and overall performance will be reported. Finally, potential improvements to the G&C design will be discussed.

Proud, Ryan W.↗

NASA pyrotechnically actuated systems program

The Office of Safety and Mission Quality initiated a Pyrotechnically Actuated Systems (PAS) Program in FY-92 to address problems experienced with pyrotechnically actuated systems and devices used both on the ground and in flight. The PAS Program will provide the technical basis for NASA's projects to incorporate new technological developments in operational systems. The program will accomplish that objective by developing/testing current and new hardware designs for flight applications and by providing a pyrotechnic data base. This marks the first applied pyrotechnic technology program funded by NASA to address pyrotechnic issues. The PAS Program has been structured to address the results of a survey of pyrotechnic device and system problems with the goal of alleviating or minimizing their risks. Major program initiatives include the development of a Laser Initiated Ordnance System, a pyrotechnic systems data base, NASA Standard Initiator model, a NASA Standard Linear Separation System and a NASA Standard Gas Generator. The PAS Program sponsors annual aerospace pyrotechnic systems workshops.

Schulze, Norman R.↗