Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical approximation & analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Atmospheric ice nuclei concentration measurements over a high altitude-station in the Western Ghats, India

Mixed-phase and ice clouds play a significant role in modulating the Indian summer monsoon rainfall, and modeling studies suggest that inaccurate representation of ice nucleating particles (INP) is one of the factors, which have resulted in a deficiency in the prediction of cloud properties and hydrological cycle. We do not understand the ice nucleation mechanisms to represent the ice formation in the model, and therefore more INP measurements at various supercooled temperatures are needed. This study reports for the first time real-time INP concentration at a high altitude station in the Western Ghats region of India, and these results will be used to constrain the ice nucleation parameterizations in the model. The variation of INP for any particular cloud condition can have strong microphysical responses of mixed-phase precipitation formation processes. Also, to improve the representation of heterogeneous ice nucleation, INP measurements of various types of aerosols commonly observed over the Indian region are needed. This study presents, the INP concentrations and daily concentration of non-refractory chemical composition (organics, sulfate, nitrate, ammonium, and chloride), cloud condensation nuclei (CCN), and aerosol size distribution. Spectrometer for Ice Nuclei (SPIN) was operated to measure INP concentration at the mountain site from August to December 2018. INP measurements were performed at three different temperatures (-25, -30, and - 34 °C) in the immersion freezing mode relevant for mixed-phase cloud conditions. The average INP concentrations approximately varied from 0.18 to 12.4 L-1, 0.39 to 24 L-1, 1.1 to 40.2 L-1 at -25, -30, and - 34 °C, respectively. These concentrations are within the concentrations reported in the literature from different regions across the globe. The air mass back trajectory analysis showed that continental air mass contains more INP compared to maritime air mass. The information on INP concentration and chemical characteristics of aerosol will help to improve heterogeneous ice nucleation parameterization in numerical models.

Kumar, Anil V.↗

On the space-charge boundary layer inside the nozzle of a cutting torch

A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type equations are used. Also an improved expression for the ion-neutral momentum transfer is employed rather than the usual constant ion-mean-free-path or constant ion collision frequency approximations. Assuming a constant electron temperature in the sheath and neglecting the electron inertial term, the continuity and momentum equations for ions and electrons, together with Poisson's equation, were solved for the electric potential, ion velocities (both normal and tangential components), and for the ion and electron densities. It was found that both the ion and electron densities present a sudden drop at the sheath-plasma edge. The ion density continues to decrease slowly inside the sheath, while the electron density presents a virtually zero value everywhere inside the sheath, the electron thermal conduction flux to the nozzle wall being negligible. These wall results thus become thermally isolated in spite of the high electron temperature in its adjacency. For a nozzle biasing voltage close to the gas breakdown, it was found that the electric field value is high, reaching a value of about 9x10{sup 6} V m{sup -1} at the exit of the nozzle wall. This value is higher than the average field value across the sheath and is on the order of the breakdown threshold value. This means that an undesired sheath breakdown could occur at the vicinities of the nozzle exit even if the average electric field across the sheath is not strong enough.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability of new exact solutions of the nonlinear Schrödinger equation in a Pöschl–Teller external potential

Here, we discuss the stability properties of the solutions of the general nonlinear Schrödinger equation in 1 + 1 dimensions in an external potential derivable from a parity-time ($ \newcommand{\PT}{\mathcal{PT}} \PT$ ) symmetric superpotential $W(x)$ that we considered earlier in Kevrekidis et al (2015 Phys. Rev. E 92 042901). In particular we consider the nonlinear partial differential equation $ \{i \, \partial_t + \partial_x^2 - V(x) + g \vert \psi(x, t) \vert ^{2\kappa} \} \, \psi(x, t) = 0 \>, $ for arbitrary nonlinearity parameter κ, where $g= \pm1$ and V is the well known Pöschl–Teller potential which we allow to be repulsive as well as attractive. Using energy landscape methods, linear stability analysis as well as a time dependent variational approximation, we derive consistent analytic results for the domains of instability of these new exact solutions as a function of the strength of the external potential and κ. For the repulsive potential we show that there is a translational instability which can be understood in terms of the energy landscape as a function of a stretching parameter and a translation parameter being a saddle near the exact solution. In this case, numerical simulations show that if we start with the exact solution, the initial wave function breaks into two pieces traveling in opposite directions. If we explore the slightly perturbed solution situations, a 1% change in initial conditions can change significantly the details of how the wave function breaks into two separate pieces. For the attractive potential, changing the initial conditions by 1% modifies the domain of stability only slightly. For the case of the attractive potential and negative g perturbed solutions merely oscillate with the oscillation frequencies predicted by the variational approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Relaxed PV Bus Model in Linear Power Flow

The emerging multimodal active energy resource units make it necessary to introduce constant voltage amplitude buses (PV bus) in the operation of modern distribution systems. To enable the analysis of PV bus using linear power flow models, this letter proposes a relaxed PV bus model for solving power flow related problems using an indirect modeling approach. The developed PV bus model can be applied to linear power flow models in both rectangular and polar coordinates. Besides, the approximation error of the relaxed PV bus model can also be controlled and quantified. Lastly, the proposed relaxed PV bus model is validated using different test systems. According to the numerical studies, the maximum error on the PV bus approximation in all case studies is only 0.61%, and the maximum error of the supporting power at the PV buses is 6.5%.

24 POWER TRANSMISSION AND DISTRIBUTION↗

SIERRA Multimechanics Module: Aria Thermal Theory Manual - Version 4.50.

This document describes the theoretical foundation of thermal analysis in Sierra Mechanics. The SIERRA Multimechanics Module: Aria, henceforth referred to as Aria for brevity, was developed at Sandia National Laboratories under the ASC program, and approximates linear and nonlinear continuum models of heat transfer. Aria uses the SIERRA Framework, which provides data management services commonly required by computational mechanics software, and facilitates the development of coupled, multi-mechanics applications for massively parallel computers. The mathematical models in Aria are based heavily on those of COYOTE, a well-established thermal analysis program that was also developed at Sandia and its ASC code predecessor, Calore. Aria, Calore and COYOTE share a significant body of numerical methods, which are described in detail by Reddy and Gartling. Throughout this document, the terms software and implementation are synonymous with the Aria thermal-fluid analysis computer program. Whether one uses Aria to perform heat transfer analysis, or in developing a new capability for the Aria application, this document provides the information needed understand the existing numerical algorithm implementations. Justification for the fundamental assumptions of heat transfer, nor derivation of the energy conservation equations are included in this document. For a more thorough theoretical background, one is referred to one of the many available textbooks, e.g. Another reference, which is freely available in downloadable electronic form, is Lienhard and Lienhard.

97 MATHEMATICS AND COMPUTING↗

SIERRA Multimechanics Module: Aria Thermal Theory Manual - Version 4.48

This document describes the theoretical foundation of thermal analysis in Sierra Mechanics. The SIERRA Multimechanics Module: Aria, henceforth referred to as Aria for brevity, was developed at Sandia National Laboratories under the ASC program, and approximates linear and nonlinear continuum models of heat transfer. Aria uses the SIERRA Framework, which provides data management services commonly required by computational mechanics software, and facilitates the development of coupled, multi-mechanics applications for massively parallel computers. The mathematical models in Aria are based heavily on those of COYOTE, a well-established thermal analysis program that was also developed at Sandia and its ASC code predecessor, Calore. Aria, Calore and COYOTE share a significant body of numerical methods, which are described in detail by Reddy and Gartling. Throughout this document, the terms software and implementation are syn onymous with the Aria thermal-fluid analysis computer program. Whether one uses Aria to perform heat transfer analysis, or in developing a new capability for the Aria application, this document provides the information needed understand the existing numerical algorithm implementations. Justification for the fundamental assumptions of heat transfer, nor derivation of the energy conservation equations are included in this document. For a more thorough theoretical background, one is referred to one of the many available textbooks, e.g. Another reference, which is freely available in downloadable electronic form, is Lienhard and Lienhard.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SIERRA Multimechanics Module: Aria Thermal Theory Manual (Version 4.46)

This document describes the theoretical foundation of thermal analysis in Sierra Mechanics. The SIERRA Multimechanics Module: Aria, henceforth referred to as Aria for brevity, was developed at Sandia National Laboratories under the ASC program, and approximates linear and nonlinear continuum models of heat transfer. Aria uses the SIERRA Framework, which provides data management services commonly required by computational mechanics software, and facilitates the development of coupled, multi-mechanics applications for massively parallel computers. The mathematical models in Aria are based heavily on those of COYOTE, a well-established thermal analysis program that was also developed at Sandia and its ASC code predecessor, Calore. Aria, Calore and COYOTE share a significant body of numerical methods, which are described in detail by Reddy and Gartling. Throughout this document, the terms software and implementation are synonymous with the Aria thermal-fluid analysis computer program.

97 MATHEMATICS AND COMPUTING↗

SIERRA Multimechanics Module: Aria Thermal Theory Manual (Version 4.44)

This document describes the theoretical foundation of thermal analysis in Sierra Mechanics. The SIERRA Multimechanics Module: Aria, henceforth referred to as Aria for brevity, was developed at Sandia National Laboratories under the ASC program, and approximates linear and nonlinear continuum models of heat transfer. Aria uses the SIERRA Framework, which provides data management services commonly required by computational mechanics software, and facilitates the development of coupled, multi-mechanics applications for massively parallel computers. The mathematical models in Aria are based heavily on those of COYOTE, a well-established thermal analysis program that was also developed at Sandia and its ASC code predecessor, Calore. Aria, Calore and COYOTE share a significant body of numerical methods, which are described in detail by Reddy and Gartling. Throughout this document, the terms software and implementation are synonymous with the Aria thermal-fluid analysis computer program.

97 MATHEMATICS AND COMPUTING↗

SIERRA Multimechanics Module: Aria Thermal Theory Manual (Version 4.42)

This document describes the theoretical foundation of thermal analysis in Sierra Mechanics. The SIERRA Multimechanics Module: Aria, henceforth referred to as Aria for brevity, was developed at Sandia National Laboratories under the ASC program, and approximates linear and nonlinear continuum models of heat transfer. Aria uses the SIERRA Framework, which provides data management services commonly required by computational mechanics software, and facilitates the development of coupled, multi-mechanics applications for massively parallel computers. The mathematical models in Aria are based heavily on those of COYOTE, a well-established thermal analysis program that was also developed at Sandia and its ASC code predecessor, Calore. Aria, Calore and COYOTE share a significant body of numerical methods, which are described in detail by Reddy and Gartling. Throughout this document, the terms software and implementation are synonymous with the Aria thermal-fluid analysis computer program.

97 MATHEMATICS AND COMPUTING↗

Validity of Machine Learning in the Quantitative Analysis of Complex Scanning Near-Field Optical Microscopy Signals Using Simulated Data

Scattering-type scanning near-field optical microscope (s-SNOM) is a modern technique for subdiffractional optical imaging and spectroscopy. Over the past two decades, tremendous efforts have been devoted to modeling complex tip-sample interactions in s-SNOM, aimed at understanding the electrodynamics of materials at the nanoscale. However, due to complexities in analytical methods and the limited computation power for fully numerical simulations, compromises must be made to facilitate the modeling of tip-sample interaction, such as using quasistatic approximation or unrealistic tip geometries. Here, we apply a variety of widely utilized machine-learning methods, including k nearest neighbor and feedforward neural network etc. to study the phase-resolved spectroscopic near-field response. With only a small set of training data, which is simulated using the finite-dipole model, we demonstrate that the relation between the experimental near-field signal and sample optical constant can be one to one mapped without the need for tip modeling: for a given material with a moderate dielectric function, its complex near-field spectrum can be accurately determined within the mid-IR spectral range, and vice versa. Our preliminary study sets the stage for future exploration using real experimental data. Our method is beneficial for processing the increasing amount of data accumulated across many research groups and especially useful for user facilities such as synchrotron-based national laboratories where a large amount of data is generated on a daily basis.

36 MATERIALS SCIENCE↗

A unified analysis of plasma-sheath transition in the Tonks–Langmuir model with warm ion source

The paper presents a comprehensive kinetic theory of the famous Tonks–Langmuir model of a plane symmetric discharge, taking into account the thermal motion of ion source particles. The ion kinetics is governed by the ionization of neutrals at electron impacts. The plasma consisting of Boltzmann distributed electrons and singly charged ions is in contact with the absorbing negative wall. The derivations are performed in the frame of the “asymptotic two-scale” approximation, when the ionization mean-free path L{sub i} is much larger than the electron Debye length λ{sub D}. In the limit (λ{sub D}/L{sub i})→0, the plasma-wall transition (PWT) layer can be split into two sublayers: a quasineutral presheath (PS) (with the scale-length L{sub i}) and the Debye sheath (DS) (with the scale λ{sub D}). Such a subdivision of the PWT layer allows to investigate these sublayers separately and simplify the analysis of the influence of the ion source thermal motion (this has been neglected in the major part of publications up to now). The uniform description of the PWT layer as a single unit is complicated by the singular presheath and sheath structure and by a coupling with the eigenvalue problem originating from the plasma balance in the bounded system. The issue is clarified both analytically and numerically by construction of a matched asymptotic expressions. The equation and the length-scale governing the transition between neighboring PS and DS sublayers are derived. The eigenvalue problem combining the wall potential, the wall location, and the ionization mean-free path is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of the Diffusion Parameter in Nonlocal Steady Diffusion Problems

The problem of identifying the diffusion parameter appearing in a nonlocal steady diffusion equation is considered. The identification problem is formulated as an optimal control problem having a matching functional as the objective of the control and the parameter function as the control variable. The analysis makes use of a nonlocal vector calculus that allows one to define a variational formulation of the nonlocal problem. In a manner analogous to the local partial differential equations counterpart, we demonstrate, for certain kernel functions, the existence of at least one optimal solution in the space of admissible parameters. We introduce a Galerkin finite element discretization of the optimal control problem and derive a priori error estimates for the approximate state and control variables. Using one-dimensional numerical experiments, we illustrate the theoretical results and show that by using nonlocal models it is possible to estimate non-smooth and discontinuous diffusion parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quinoa, Version 0.2

Quinoa is a set of computational tools that enables research and numerical analysis in fluid dynamics. At this time it remains a test-bed to experiment with various algorithms using fully asynchronous runtime systems. Currently, Quinoa consists of the following tools: (1) Walker, a numerical integrator for systems of stochastic differential equations in time. It is a mathematical tool to analyze and design the behavior of stochastic differential equations. It allows the estimation of arbitrary coupled statistics and probability density functions and is currently used for the design of statistical moment approximations for multiple mixing materials in variable-density turbulence. (2) Inciter, an overdecomposition-aware finite element field solver for partial differential equations using 3D unstructured grids. Inciter is used to research asynchronous mesh-based algorithms and to experiment with coupling asynchronous to bulk-synchronous parallel code. Two planned new features of Inciter, compared to the previous release (LA-CC-16-015), to be implemented in 2017, are (a) a simple Navier-Stokes solver for ideal single-material compressible gases, and (b) solution-adaptive mesh refinement (AMR), which enables dynamically concentrating compute resources to regions with interesting physics. Using the NS-AMR problem we plan to explore how to scale such high-load-imbalance simulations, representative of large production multiphysics codes, to very large problems on very large computers using an asynchronous runtime system. (3) RNGTest, a test harness to subject random number generators to stringent statistical tests enabling quantitative ranking with respect to their quality and computational cost. (4) UnitTest, a unit test harness, running hundreds of tests per second, capable of testing serial, synchronous, and asynchronous functions. (5) MeshConv, a mesh file converter that can be used to convert 3D tetrahedron meshes from and to either of the following formats: Gmsh, http://www.geuz.org/gmsh, Netgen, http://sourceforge.net/apps/mediawiki/netgen-mesher, ExodusII, http://sourceforge.net/projects/exodusii, HyperMesh, http://www.altairhyperworks.com/product/HyperMesh.

Bakosi, Jozsef↗

Weyl rings and enhanced susceptibilities in pyrochlore iridates: k · p analysis of cluster dynamical mean-field theory results

We match analytic results to numerical calculations to provide a detailed picture of the metal-insulator and topological transitions found in density functional plus cluster dynamical mean-field calculations of pyrochlore iridates. We discuss the transition from Weyl metal to Weyl semimetal regimes, and then analyze in detail the properties of the Weyl semimetal phase and its evolution into the topologically trivial insulator. The energy scales in the Weyl semimetal phase are found to be very small, as are the anisotropy parameters. The electronic structure can, to a good approximation, be described as “Weyl rings” and one of the two branches that contributes to the Weyl bands is essentially flat, leading to enhanced susceptibilities. The optical longitudinal and Hall conductivities are determined; the frequency dependence includes pronounced features that reveal the basic energy scales of the Weyl semimetal phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Empirical Quantile Estimation Approach for Chance-Constrained Nonlinear Optimization Problems

We investigate an empirical quantile estimation approach to solve chance-constrained nonlinear optimization problems. Our approach is based on the reformulation of the chance constraint as an equivalent quantile constraint to provide stronger signals on the gradient. In this approach, the value of the quantile function is estimated empirically from samples drawn from the random parameters, and the gradient of the quantile function is estimated via a finite-difference approximation on top of the quantile-function-value estimation. We establish a convergence theory of this approach within the framework of an augmented Lagrangian method for solving general nonlinear constrained optimization problems. The foundation of the convergence analysis is a concentration property of the empirical quantile process, and the analysis is divided based on whether or not the quantile function is differentiable. In contrast to the sampling-and-smoothing approach used in the literature, the method developed in this paper does not involve any smoothing function and hence the quantile-function gradient approximation is easier to implement and there are less accuracy-control parameters to tune. Furthermore, we demonstrate the effectiveness of this approach and compare it with a smoothing method for the quantile-gradient estimation. Numerical investigation shows that the two approaches are competitive for certain problem instances.

Applied Probability↗

Correlating electroluminescence characterization and physics-based models of InGaN/GaN LEDs: Pitfalls and open issues

Electroluminescence (EL) characterization of InGaN/GaN light-emitting diodes (LEDs), coupled with numerical device models of different sophistication, is routinely adopted not only to establish correlations between device efficiency and structural features, but also to make inferences about the loss mechanisms responsible for LED efficiency droop at high driving currents. The limits of this investigative approach are discussed here in a case study based on a comprehensive set of current- and temperature-dependent EL data from blue LEDs with low and high densities of threading dislocations (TDs). First, the effects limiting the applicability of simpler (closed-form and/or one-dimensional) classes of models are addressed, like lateral current crowding, vertical carrier distribution nonuniformity, and interband transition broadening. Then, the major sources of uncertainty affecting state-of-the-art numerical device simulation are reviewed and discussed, including (i) the approximations in the transport description through the multi-quantum-well active region, (ii) the alternative valence band parametrizations proposed to calculate the spontaneous emission rate, (iii) the difficulties in defining the Auger coefficients due to inadequacies in the microscopic quantum well description and the possible presence of extra, non-Auger high-current-density recombination mechanisms and/or Auger-induced leakage. In the case of the present LED structures, the application of three-dimensional numerical-simulation-based analysis to the EL data leads to an explanation of efficiency droop in terms of TD-related and Auger-like nonradiative losses, with a C coefficient in the 10{sup −30} cm{sup 6}/s range at room temperature, close to the larger theoretical calculations reported so far. However, a study of the combined effects of structural and model uncertainties suggests that the C values thus determined could be overestimated by about an order of magnitude. This preliminary attempt at uncertainty quantification confirms, beyond the present case, the need for an improved description of carrier transport and microscopic radiative and nonradiative recombination mechanisms in device-level LED numerical models.

36 MATERIALS SCIENCE↗

Analysis of seismic sources for different mechanisms of fracture growth for microseismic monitoring applications

We have developed and illustrated an approach for geomechanic modeling of elastic wave generation (microsiesmic event occurrence) during incremental fracture growth. We then derived properties of effective point seismic sources (radiation patterns) approximating obtained wavefields. These results establish connection between geomechanic models of hydraulic fracturing and microseismic monitoring. Thus, the results of the moment tensor inversion of microseismic data can be related to different geomechanic scenarios of hydraulic fracture growth. In future, the results can be used for calibrating hydrofrac models. We carried out a series of numerical simulations and made some observations about wave generation during fracture growth. In particular when the growing fracture hits pre-existing crack then it generates much stronger microseismic event compared to fracture growth in homogeneous medium (radiation pattern is very close to the theoretical dipole-type source mechanism)

42 ENGINEERING↗

Circularly polarized few-optical-cycle solitons in the short-wave-approximation regime

We consider the propagation of few-cycle pulses (FCPs) beyond the slowly varying envelope approximation in media in which the dynamics of constituent atoms is described by a two-level Hamiltonian by taking into account the wave polarization. We consider the short-wave approximation, assuming that the resonance frequency of the two-level atoms is well below the inverse of the characteristic duration of the optical pulse. By using the reductive perturbation method (multiscale analysis), we derive from the Maxwell-Bloch-Heisenberg equations the governing evolution equations for the two polarization components of the electric field in the first order of the perturbation approach. We show that propagation of circularly polarized (CP) few-optical-cycle solitons is described by a system of coupled nonlinear equations, which reduces in the scalar case to the standard sine Gordon equation describing the dynamics of linearly polarized FCPs in the short-wave-approximation regime. By direct numerical simulations, we calculate the lifetime of CP FCPs, and we study the transition to two orthogonally polarized single-humped pulses as a generic route of their instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗