Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observation geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Impact Ice Adhesion at NASA Glenn: Current Experimental Methods and Supporting Measurements

When examining the literature on the adhesion strength of impact ice, there have been a wide range of methodologies tried to measure the required stresses to induce interfacial delamination. Utilizing the Icing Research Tunnel at the NASA Glenn Research Center to generate the impact ice required for this work, several different mechanical tests have been and are being developed to determine the stresses along the interface between ice and coupon. This set of tests includes the technical mature modified lap joint test which has been used to conduct ice adhesion studies through a wide sweep of icing conditions. To conduct in situ ice adhesion measurements inside of the Icing Research Tunnel, several new experiments are currently being developed to make ice adhesion measurements during and immediately after ice accretion. In addition to these experimental methods, several supporting measurement techniques have been developed to allow for a better understanding on the influence of icing cloud conditions on the mechanical behavior of impact ice. Digital image correlation has been successfully implemented to augment the data generated by the modified lap joint test with full field surface displacement and strain measurements which allow for insight into the deformation processes present during a test. Both optical microscopy of impact ice samples along with ice replication techniques have been used to study the grain structure of the impact ice. This has led to a deeper understanding of the results from the modified lap join method and how the structure of impact ice changes as it is accreted during an icing spray. The freezing process of impact ice generated by supercooled liquid water is not a volume conserving process, which leads to the presence of residual strains along the interface between ice and substrate. These strains have been observed using both a simplified flat geometry and a representative airfoil. The data gathered by these experimental adhesion methods and supporting measurements allows for a compressive understanding on the behavior of impact ice which will be critical to the development of future ice shedding models.

Ice Adhesion↗

Comparison Between Ozone Column Depths and Methane Lifetimes Computed By One- and Three-Dimensional Models at Different Atmospheric O(2) Levels

The calculation of ozone column depth as a function of atmospheric O2concentration has been performed multiple times over the past 40 years using one-dimensional (1-D) photochemical models. Several of these calculations [1–3] have been done by the Kasting group. We refer to the current version of that model as the‘standard’1-D model (see §2). Recently, Cooke et al., henceforth C22 ,performed a similar calculation using a three-dimensional (3-D) coupled chemistry-climate model (WACCM6). They found substantially lower ozone column depths at lower pO2levels. For example, at0.01 times the present atmospheric level (PAL) of O(2), Segura et al. calculated 124 Dobson units(DU), whereas C22 calculated a mean column depth of just 66 DU—almost a factor of two lower. This comparison is shown in figure 1. C22 argued, correctly, that 3-D models should be able to do a better job on this problem than 1-D models because ozone column depths are affected by atmospheric transport, e.g. the Brewer–Dobson circulation in the stratosphere that blows ozone from the tropics towards the poles, as well as vertical transport that carries ozone downward from the stratosphere to the troposphere. Meridional transport is absent in 1-D models, and vertical transport is fixed, so model geometry almost certainly contributes to the observed discrepancies in ozone column depth. The 3-D model also has a variable tropopause height (higher at the equator, lower towards the poles), which is difficult to simulate in one dimension.

Atmospheric chemistry↗

Prospects for Astrobiology and Technosignature Searches with the Vera C. Rubin Observatory Legacy Survey of Space and Time

The Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) will map sources in multiband colour--variability space. We present a prototype coherence-based framework for astrobiology and technosignature searches, in which candidates are treated as structured departures from natural astrophysical manifolds rather than isolated photometric outliers. We illustrate the framework with three simulated cases: five Kuiper Belt Object (KBO) surface/activity states, a grid of 649 synthetic exoplanet spectra with vegetation-red-edge-like (VRE) perturbations, and 500 synthetic multiband light curves, each projected into LSST-like observable space and analysed through colour geometry, chromatic variability, and cross-band coherence. Key results include a full-colour Mahalanobis distance $D\approx5.1$ for the weak-coma KBO state (${\sim}5σ$ in the five-dimensional colour vector), an indicative VRE coherence threshold at $f_{\rm crit}\approx0.13$, and an idealised stacking forecast reaching $5σ$ under optimistic assumptions. We show, using a small Gaia~DR3 stellar sample, that stellar colour and photometric stability may inform the prioritisation of Galactic regions for applying such coherence diagnostics.

Kovačević, Andjelka B. [Belgrade U.] (ORCID:000000↗

Neutron Characterization of 3D Printed Gas Turbine Alloy With Internal Cooling Structure

The objective of this research work is to investigate the residual strains induced by the presence of a exit hole and internal hollow geometry present in a 3D printed IN718 similar to that seen in a gas turbine blade. The specimens were manufactured with an internal hollow structure that ended with an exit hole, and fabricated by direct metal laser sintering additive manufacturing technique. Using this technique, metal powder was melted by a laser source and rapidly cooled to form the part layer by layer. Rapid heating and cooling generate large thermal gradients and residual stresses in the 3D printed material. To be aligned with industry standards, specimens were heat-treated to relieve most of the residual stresses as well as to investigate whether IN718 still preserved a nonhomogeneous stress state after the thermal treatment. Roughness and microstructure analysis was performed to understand the heat-treated sample properties. To investigate the volumetric residual strain, the neutron diffraction technique was used with a definite neutron wavelength. Bragg’s law was used to determine lattice spacing. Interplanar lattice spacing and stress-free state lattice spacings were measured to calculate the strains. Residual strains were measured in the x and y direction to understand the impact of the presence of a exit hole and internal hollow geometry. The results of volumetric residual strain in the x and y directions showed no significant variations in the distribution of the strain due to the presence of a hollow structure as well as the exit hole. Overall, no significant stress concentration was observed in the heat treated sample. Sample geometry, instrumentation for neutron diffraction, and material properties are discussed in detail in this paper.

Raju, Nandhini↗

ANTI-CORRELATED SOFT LAGS IN THE INTERMEDIATE STATE OF BLACK HOLE SOURCE GX 339-4

We report the few hundred second anti-correlated soft lags between soft and hard energy bands in the source GX 339-4 using RXTE observations. In one observation, anti-correlated soft lags were observed using the ISGRI/INTEGRAL hard energy band and the PCA/RXTE soft energy band light curves. The lags were observed when the source was in hard and soft intermediate states, i.e., in a steep power-law state. We found that the temporal and spectral properties were changed during the lag timescale. The anti-correlated soft lags are associated with spectral variability during which the geometry of the accretion disk is changed. The observed temporal and spectral variations are explained using the framework of truncated disk geometry. We found that during the lag timescale, the centroid frequency of quasi-periodic oscillation is decreased, the soft flux is decreased along with an increase in the hard flux, and the power-law index steepens together with a decrease in the disk normalization parameter. We argue that these changes could be explained if we assume that the hot corona condenses and forms a disk in the inner region of the accretion disk. The overall spectral and temporal changes support the truncated geometry of the accretion disk in the steep power-law state or in the intermediate state.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic geometry effects on turbulent density fluctuations in Wendelstein 7-X

Line-integrated density fluctuation measurements from the core of the optimised stellarator Wendelstein 7-X (W7-X) are studied in the context of magnetic field geometry changes. The amplitude as well as the spectral distribution of fluctuations is affected by varying the magnetic field configuration. Weaker turbulent fluctuations are observed in configurations with higher rotational transform and lower magnetic mirror depth. Simulations with the gyrokinetic codes stella and GENE-3D are used to investigate the role of magnetic geometry for the experimental observations. The stabilising effect of the high rational transform configuration is reproduced by simulations and can be associated with stronger shaping of the magnetic field. This leads to increased finite Larmor radius and local shear effects, which limit the toroidal extent of ion temperature gradient (ITG) modes. For W7-X configurations with higher magnetic mirror depth, gyrokinetic theory and simulations predict weaker fluctuations, since they are closer to having the maximum-J property, which has a stabilising effect on trapped-electron mode and ITG. The opposite trend is observed experimentally, which can therefore not be explained by geometry effects on turbulence alone.

Wendelstein-7X↗

Taming the heat flux problem: Advanced divertors towards fusion power

The next generation fusion machines are likely to face enormous heat exhaust problems. In addition to summarizing major issues and physical processes connected with these problems, we discuss how advanced divertors, obtained by modifying the local geometry, may yield workable solutions. We also point out that: (1) the initial interpretation of recent experiments show that the advantages, predicted, for instance, for the X-divertor (in particular, being able to run a detached operation at high pedestal pressure) correlate very well with observations, and (2) the X-D geometry could be implemented on ITER (and DEMOS) respecting all the relevant constraints. As a result, a roadmap for future research efforts is proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Intruder configurations of excited states in the neutron-rich isotopes P 33 and P 34

Here, excited states in the neutron-rich isotopes P 33 and P 34 were populated by the O 18 + O 18 fusion-evaporation reaction at E lab = 24 MeV. The Gammasphere array was used along with the Microball particle detector array to detect γ transitions in coincidence with the charged particles emitted from the compound nucleus S 36 . The use of Microball enabled the selection of the proton emission channel. It also helped in determining the exact position and energy of the emitted proton; this was later employed in kinematic Doppler corrections. 16 new transitions and 13 new states were observed in P 33 and 21 γ rays and 20 energy levels were observed in P 34 for the first time. The nearly 4 π geometry of Gammasphere allowed the measurement of γ -ray angular distributions leading to spin assignments for many states. The experimental observations for both isotopes were interpreted with the help of shell-model calculations using the (0+1) ℏ ω PSDPF interaction. The calculations accounted for both the 0p-0h and 1p-1h states reasonably well and indicated that 2p-2h excitations might dominate the higher-spin configurations in both P 33 and P 34 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Convection experiments in a centrifuge and the generation of plumes in a very viscous fluid

In this paper, experiments are described for which inertial effects are negligible. A small aspect-ratio tank filled with a very viscous fluid (Pr = 10 to the 6th) is used to observe the behavior of convection for Rayleigh numbers up to 6.3 x 10 to the 5th. These high values are reached by conducting the experiment in a centrifuge which provides a 130-fold increase in apparent gravity. Rotational effects are small, but cannot be totally dismissed. In this geometry, thermal boundary layer instabilities are indeed observed, and are found to be very similar to their lower Prandtl number counterparts. It is tentatively concluded that once given a certain degree of 'vulnerability' convection can develop 'plume' like instabilities, even when the Prandtl number is infinite. The concept is applied to the earth's mantle and it is speculated that 'plumes' could well be the dominant mode of small-scale convection under the lithospheric plates.

Nataf, H.-C.↗

Mars Global Surveyor TES Results: Observations of Atmospheric Dust During Mapping

The Mars Global Surveyor entered mapping orbit around Mars in March 1999. Infrared spectra returned by the Thermal Emission Spectrometer (TES) are very well suited for monitoring column-integrated infrared dust opacity. A global view of dust opacity is possible on a daily basis allowing the detailed study of the evolution of dust storms and the seasonal trend of the background dust opacity. Information about the vertical distribution of dust in the atmosphere can be obtained by examination of TES spectra taken in a limb-viewing geometry. We report here on 1) the observed horizontal distribution of dust aerosols and their evolution with time during the mapping phase of the Mars Global Surveyor mission so far (roughly covering northern hemisphere summer and early fall), and 2) the vertical distribution of dust aerosols as determined from TES spectra taken in the limb-viewing geometry.

Smith, Michael D.↗

Using the SPICE system to help plan and interpret space science observations

A portable multimission information system named SPICE is used to assemble, archive, and provide easy user access to viewing geometry and other ancillary information needed by space scientists to interpret observations of bodies within our solar system. The modular nature of this system lends it to use in planning such observations as well. With a successful proof of concept on Voyager, the SPICE system has been adapted to the Magellan, Galileo and Mars Observer missions, and to a variety of ground based operations. Adaptation of SPICE for Cassini and the Russian Mars 94/96 projects is underway, and work on Cassini will follow, SPICE has been used to support observation planning for moving targets on the Hubble Space Telescope Project. Applications for SPICE on earth science, space physics and other astrophysics missions are under consideration.

Acton, Charles H., Jr.↗

Chandra Reveals Heavy Obscuration and Circumnuclear Star Formation in Seyfert 2 Galaxy NGC 4968

We present the Chandra imaging and spectral analysis of NGC 4968, a nearby (z = 0.00986) Seyfert 2 galaxy. We discover extended (approx. 1 kpc) X-ray emission in the soft band (0.5-2 keV) that is neither coincident with the narrow line region nor the extended radio emission. Based on spectral modeling, it is linked to on-going star formation [approx. 2.6-4 Mass compared to Earth yr(exp.− 1)]. The soft emission at circumnuclear scales (inner approx. 400 pc) originates from hot gas, with kT approx. 0.7 keV, while the most extended thermal emission is cooler (kT approx. 0.3 keV). We refine previous measurements of the extreme Fe K alpha equivalent width in this source (EW 2.5 + 2.6/-1.0 keV), which suggests the central engine is completely embedded within Compton-thick levels of obscuration. Using physically motivated models fit to the Chandra spectrum, we derive a Compton-thick column density [N(sub H) is greater than 1.25× 10(exp 24) cm(exp.− 2)] and an intrinsic hard (2-10 keV) X-ray luminosity of approx. 3-8× 10(exp. 42) erg s(exp. − 1) (depending on the presumed geometry of the obscurer), which is over two orders of magnitude larger than that observed. The large Fe K Alpha EW suggests a spherical covering geometry, which could be confirmed with X-ray measurements above 10 keV. NGC 4968 is similar to other active galaxies that exhibit extreme Fe K Alpha EWs (i.e., greater than 2 keV) in that they also contain on-going star formation. This work supports the idea that gas associated with nuclear star formation may increase the covering factor of the enshrouding gas and play a role in obscuring active galactic nuclei.

LaMassa, Stephanie M.↗

X-Ray Polarimetry of the Accreting Pulsar GX 301-2

The phase- and energy-resolved polarization measurements of accreting X-ray pulsars (XRPs) allow us to test different theoretical models of their emission, and they also provide an avenue to determine the emission region geometry. We present the results of the observations of the XRPGX 301−2 performed with the Imaging X-ray Polarimetry Explorer (IXPE). A persistent XRP, GX 301−2 has one of the longest spin periods known:∼680 s. A massive hyper-giant companion star Wray 977 supplies mass to the neutron star via powerful stellar winds. We did not detect significant polarization in the phase-averaged data when using spectropolarimetric analysis, with the upper limit on the polarization degree (PD)of 2.3% (99% confidence level). Using the phase-resolved spectropolarimetric analysis, we obtained a significant detection of polarization (above99% confidence level) in two out of nine phase bins and a marginal detection in three bins, with a PD ranging between∼3% and∼10% and a polarization angle varying in a very wide range from∼0◦to∼160◦. Using the rotating vector model, we obtained constraints on the pulsar geometry using both phase-binned and unbinned analyses, finding excellent agreement. Finally, we discuss possible reasons for a low observed polarization in GX 301−2.

GX 301-2, polarization, X-ray, X-ray binary, pulsa↗

The complex accretion geometry of GX 339–4 as seen by NuSTAR and Swift

We present spectral analyses of five Nuclear Spectroscopic Telescope Array and Swift observations of GX 339–4 taken during a failed outburst during the summer of 2013. These observations cover Eddington luminosity fractions in the range ≈0.9%–6%. Throughout this outburst GX 339–4 stayed in the hard state and all five observations show similar X-ray spectra, with a hard power law with a photon index near 1.6, and significant contribution from reflection. Using simple reflection models we find unrealistically high iron abundances. Allowing for different photon indices for the continuum incident on the reflector relative to the underlying observed continuum results in a statistically better fit and reduced iron abundances. With a photon index around 1.3, the input power law on the reflector is significantly harder than that which is directly observed. We study the influence of different emissivity profiles and geometries and consistently find an improvement when using separate photon indices. The inferred inner accretion disk radius is strongly model dependent, but we do not find evidence for a truncation radius larger than 100 r{sub g} in any model. The data do not allow independent spin constraints, but the results are consistent with the literature (i.e., a>0). Our best-fit models indicate an inclination angle in the range 40°–60°, consistent with limits on the orbital inclination but higher than reported in the literature using standard reflection models. The iron line around 6.4 keV is clearly broadened, and we detect a superimposed narrow core as well. This core originates from a fluorescent region outside the influence of the strong gravity of the black hole. Additionally, we discuss possible geometries.

79 ASTRONOMY AND ASTROPHYSICS↗

Superconducting scanning tunneling microscopy tips in a magnetic field: Geometry-controlled order of the phase transition

The properties of geometrically confined superconductors significantly differ from their bulk counterparts. Here, we demonstrate the geometrical impact for superconducting scanning tunneling microscopy (STM) tips, where the confinement ranges from the atomic to the mesoscopic scale. To this end, we compare the experimentally determined magnetic field dependence for several vanadium tips to microscopic calculations based on the Usadel equation. For our theoretical model of a superconducting cone, we find a direct correlation between the geometry and the order of the superconducting phase transition. Increasing the opening angle of the cone changes the phase transition from first to second order. Comparing our experimental findings to the theory reveals first and second order quantum phase transitions in the vanadium STM tips. In addition, the theory also explains experimentally observed broadening effects by the specific tip geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The NuSTAR View of the Seyfert 2 Galaxy NGC 4388

We present an analysis of NuSTAR X-ray observations in the 3–79 keV energy band of the Seyfert 2 galaxy NGC 4388, taken in 2013. The broadband sensitivity of NuSTAR, covering the Fe Kα line and Compton reflection hump, enables tight constraints to be placed on reflection features in AGN X-ray spectra, thereby providing insight into the geometry of the circumnuclear material. In this observation, we found the X-ray spectrum of NGC 4388 to be well described by a moderately absorbed power law with non-relativistic reflection. We fit the spectrum with phenomenological reflection models and a physical torus model and find the source to be absorbed by Compton-thin material (N {sub H} = (6.5 ± 0.8) × 10{sup 23} cm{sup −2}) with a very weak Compton reflection hump (R < 0.09) and an exceptionally large Fe Kα line (EW=368{sub −53}{sup +56} eV) for a source with weak or no reflection. Calculations using a thin-shell approximation for the expected Fe Kα EW indicate that an Fe Kα line originating from Compton-thin material presents a possible explanation.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-range sound-mediated dark-soliton interactions in trapped atomic condensates

A long-range soliton interaction is discussed whereby two or more dark solitons interact in an inhomogeneous atomic condensate, modifying their respective dynamics via the exchange of sound waves without ever coming into direct contact. An idealized double-well geometry is shown to yield perfect energy transfer and complete periodic identity reversal of the two solitons. Two experimentally relevant geometries are analyzed which should enable the observation of this long-range interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗