Search NASA⌕ Search

SEARCH · Search NASA

Results for “Positioning System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Convective-Permitting Hindcast Simulations during the North American Monsoon GPS Transect Experiment 2013: Establishing Baseline Model Performance without Data Assimilation

During the North American monsoon global positioning system (GPS) Transect Experiment 2013, daily convective-permitting WRF simulations are performed in northwestern Mexico and the southern Arizona border region using the operational Global Forecast System (GFS) and North American Mesoscale Forecast System (NAM) models as lateral boundary forcing and initial conditions. Compared to GPS precipitable water vapor (PWV), the WRF simulations display a consistent moist bias in the initial specification of PWV leading to convection beginning 3–6 h early. Given appreciable observed rainfall, days are classified as strongly and weakly forced based only on the presence of an inverted trough (IV); gulf surges did not noticeably impact the development of mesoscale convective systems (MCSs) and related convection in northwestern Mexico. Strongly forced days display higher modeled precipitation forecast skill than weakly forced days in the slopes of the northern Sierra Madre Occidental (SMO) away from the crest, especially toward the west where MCSs account for the greatest proportion of all monsoon-related precipitation. A case study spanning 8–10 July 2013 illustrates two consecutive days when nearly identical MCSs evolved over northern Sonora. Although a salient MCS is simulated on the strongly forced day (9–10 July 2013) when an IV is approaching the core monsoon region, a simulated MCS is basically nonexistent on the weakly forced day (8–9 July 2013) when the IV is farther away. Finally, the greater sensitivity to the initial specification of PWV in the weakly forced day suggests that assimilation of GPS-derived PWV for these types of days may be of greatest value in improving model precipitation forecasts.

54 ENVIRONMENTAL SCIENCES↗

Deformation analysis of Aceh April 11{sup th} 2012 earthquake using GPS observation data

This research tries to estimate the co-seismic deformation of intraplate earthquake occurred off northern Sumatra coast which is about 100-200 km southwest of Sumatrasubduction zone. The earthquake mechanism was strike-slip with magnitude 8.6 and triggering aftershock with magnitude 8.2 two hours later. We estimated the co-seismic deformation by using the GPS (Global Positioning System) continuous data along western Sumatra coast. The GPS observation derived from Sumatran GPS Array (SuGAr) and Geospatial Information Agency (BIG). For data processing we used GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) to estimate the co-seismic deformation. From the GPS daily solution, the result shows that the earthquake caused displacement for the GPS stations in Sumatra. GPS stations in northern Sumatra showed the displacement to the northeast with the average displacement was 15 cm. The biggest displacement was found at station BSIM which is located at Simeuleu Island off north west Sumatra coast. GPS station in middle part of Sumatra, the displacement was northwest. The earthquake also caused subsidence for stations in northern Sumatra, but from the time series there was not sign of subsidence was found at middle part of Sumatra. In addition, the effect of the earthquake was worldwide and affected the other GPS Stations around Hindia oceanic.

58 GEOSCIENCES↗

Depleted Uranium Discrimination Using Spectral Ratios from Data-Starved Spectra - 18619

The Institute for Clean Energy Technology (ICET) has developed mobile surveying platforms for the retrieval of fired depleted uranium (DU) munitions. ICET surveying platforms are fitted with differential global positioning system (GPS), scintillation detectors, and central processing units (CPUs). The surveying technology has historically been used to assist facilities where DU contamination is a concern to locate, retrieve, and remediate DU-contaminated areas. Residence times over DU sources for mobile systems normally do not produce enough data to use gamma ray spectroscopy to verify the source type. Discussed is a potential method used to discriminate DU signatures in data-starved gamma ray spectral data collected during field surveys. Laboratory tests have shown that data-starved gamma ray spectra for zero-valence, oxide, and uranium ores can be distinguished from each other and from background by spectral ratioing. Zero-valence DU and DU oxide gamma ray signatures differ due to the attenuation of low-energy gammas emitted from U-238 daughters. DU signatures can be differentiated from naturally occurring uranium spectra due to the presence of daughters below U-234, primarily bismuth (Bi)-214, in the uranium decay series. Three primary regions of interest (ROI) within the analyzed test spectra are used to roughly characterize the shape of each test spectrum and compare them to background. The three ROIs are focused around the gamma-emitting daughters of U-238: thorium (Th)-234, protactinium (Pa)-234 metastable (m), and Bi-214. One of the three regions is considered the base region. This region is used to estimate what the counts in the other two regions should be by multiplying the counts in the ROIs by a ratio of background counts from an area previously found to be impacted. Using this spectral ratioing technique, a non-zero difference in spectral ratio values indicates a shift in the test spectra away from background. Calculating ratios between the base region and the other two regions allows for a graphical representation of the data in a two-dimensional spectral ratioing space, which is used to differentiate between the types of uranium sources previously mentioned. Surveying processes that are based on gross counts from scintillation counters can result in a large number of false positives as a result of shifting background signals or the presence of naturally occurring uranium. Application of the spectral ratioing technique can further assist in site characterization by analyzing all of the data-starved survey spectra to identify false positives or the need for additional data collection. Accurate surveys of DU testing and training ranges reduces the costs associated with range clean-up by discriminating clean areas from those requiring remediation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microwave and Millimeter-Wave Radiometric Studies of Temperature, Water Vapor and Clouds

The importance of accurate measurements of column amounts of water vapor and cloud liquid has been well documented by scientists within the Atmospheric Radiation Measurement (ARM) Program. At the North Slope of Alaska (NSA), both microwave radiometers (MWR) and the MWRProfiler (MWRP), been used operationally by ARM for passive retrievals of the quantities: Precipitable Water Vapor (PWV) and Liquid Water Path (LWP). However, it has been convincingly shown that these instruments are inadequate to measure low amounts of PWV and LWP. In the case of water vapor, this is especially important during the Arctic winter, when PWV is frequently less than 2 mm. For low amounts of LWP (< 50 g/m{sup 2}), the MWR and MWRP retrievals have an accuracy that is also not acceptable. To address some of these needs, in March-April 2004, NOAA and ARM conducted the NSA Arctic Winter Radiometric Experiment - Water Vapor Intensive Operational Period at the ARM NSA/Adjacent Arctic Ocean (NSA/AAO) site. After this experiment, the radiometer group at NOAA moved to the Center for Environmental Technology (CET) of the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. During this 2004 experiment, a total of 220 radiosondes were launched, and radiometric data from 22.235 to 380 GHz were obtained. Primary instruments included the ARM MWR and MWRP, a Global Positioning System (GPS), as well as the CET Ground-based Scanning Radiometer (GSR). We have analyzed data from these instruments to answer several questions of importance to ARM, including: (a) techniques for improved water vapor measurements; (b) improved calibration techniques during cloudy conditions; (c) the spectral response of radiometers to a variety of conditions: clear, liquid, ice, and mixed phase clouds; and (d) forward modeling of microwave and millimeter wave brightness temperatures from 22 to 380 GHz. Many of these results have been published in the open literature. During the third year of this contract, we participated in another ARM-sponsored experiment at the NSA during February-March 2007. This experiment is called the Radiative Heating in Underexplored Bands Campaign (RHUBC) and the GSR was operated successfully for the duration of the campaign. One of the principal goals of the experiment was to provide retrievals of water vapor during PWV amounts less than 2 mm and to compare GSR data with ARM radiometers and radiosondes. A secondary goal was to compare the radiometric response of the microwave and millimeter wavelength radiometers to water and ice clouds. In this final report, we will include the separate progress reports for each of the three years of the project and follow with a section on major accomplishments of the project.

54 ENVIRONMENTAL SCIENCES↗

Analysis framework for systematically studying ionospheric response to impulsive events from below: Analysis Framework Ionospheric Responses

We present that impulsive phenomena in the Earth's atmosphere produce acoustic and gravity waves which perturb the ionosphere. Such perturbations are often measured using total electron content fluctuations (TEC), derived from ground-based Global Positioning System data. Using TEC data from the Japanese GEONET ground network after the Tōhoku earthquake on 11 March 2011, we demonstrate capabilities of a new framework of methodologies for analyzing ionospheric perturbations. The framework consists of several new techniques: calculating velocity along a single direction to reduce error due to anisotropic propagation, producing normalized bidirectional band-pass spectra that preserve relative timing between various frequencies and allowing a more systematic determination of broadband pulses, and utilizing a wavelet-based technique that considers instantaneous wave phase changes, rather than best fit time differences, to evaluate wave characteristics (speed, direction, and wavelength) within spectral ranges of interest. Using these techniques together decreases subjectivity and reduces errors in attributing fluctuations to given sources. In validating this framework using the Tōhoku case, we consistently identify three kinds of waves: a broad-band pulse (speed: >2000 m/s, max range: >1400 km) arriving in the ionosphere 10–15 min after the quake, acoustic waves following the pulse (period: 3–5 min, speed: 700–1000 m/s, max range: <500 km), and gravity waves (period: 10–15 min, speed: 150–500 m/s, max range: >1400 km) propagating away from the epicenter, consistent with theory and demonstrated in previous studies. Lastly, this framework also can be applied to other impulsive events in the atmosphere that are more difficult to detect and attribute to sources.

58 GEOSCIENCES↗

GPS-Based Gamma Survey for Characterizing and Decommissioning NORM Sites - 20389

Gamma survey techniques are an especially powerful decommissioning tool at naturally occurring radioactive material (NORM) sites due to both the low cost to obtain data over a large spatial scale and the abundance of gamma emitters in the uranium and thorium decay series. Gamma surveys are executed by coupling a detector - most often a sodium iodide crystal - to a global positioning system (GPS), then reporting a location and gross gamma reading coincidentally to a data logger. Systems may be carried by workers or mounted to a car, all-terrain vehicle, or unmanned aerial system (UAS). The resulting data set provides a high-resolution but low precision map of the gamma radiation field over the area surveyed. Frequently this map is also correlated to soil concentrations of NORM radionuclides (most often, Ra-226) and/or exposure rate. Gamma survey parameters such as movement speed, transect spacing, and data logging frequency define the spatial resolution of the resulting surface, and can be optimized depending on the desired survey sensitivity. This paper examines gamma survey as a tool for decommissioning NORM sites and provides an overview of current gamma survey technology designed to improve the efficiency and effectiveness of the decommissioning process. Topics to be discussed in the paper include: - An overview of gamma survey systems, and the utility of different delivery vehicles depending on desired cost, desired spatial resolution, and site topography. - The influence of physical detector characteristics on detection sensitivity and survey planning. - The tradeoff between high-resolution and large spatial extent, but inherently uncertain data, and low-resolution, low spatial extent, but highly certain data, as well as the specific utility of each of these types of data during NORM facility decommissioning. - Confounding variables that may limit the utility of gamma survey at some sites (e.g., radon gas and spatial heterogeneity / hot spots), and methods to plan for and control these conditions. Results show that the confounding variables, such as radon and data output can greatly influence the overall data quality associated with the decommissioning process. In addition, the use of real-time and aerial survey platforms provides a method for ensuring proper spatial extent of the data. When applied thoughtfully, gamma survey is a powerful tool for detecting NORM radionuclides in the environment and a cost-effective technique for identifying areas requiring remediation. However, entities performing or using gamma survey as a decommissioning tool must be aware of both its advantages and its limitations before basing remediation or regulatory action on gamma survey results. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessment of heavy metals in seawater and fish tissues at Pulau Indah, Selangor, Malaysia

This study focuses on the levels of heavy metals in seawater and selected fish tissue at Pulau Indah, Selangor, Malaysia. Pulau Indah primarily contains Westport (Malaysia’s major port), and a host of full scales factories. Therefore, it is important to monitor the levels of pollution in this water body and the aquatic organisms in the long term effects, due to the human activities in this area. Water samples in this study were taken from 8 locations along the coastal area. The water samples were collected using water sampler and sampling locations were determined using a Global Positioning system (GPS). Similarly, in situ water quality parameters including temperature, dissolve oxygen (DO), salinity, total suspended solid (TSS), pH and turbidity were measured by using portable multi probes meter. Then, the samples were acidified until pH 2 and filtered. Fish samples were purchased from local fisherman along the Pulau Indah coastal area and samples were digested using concentrated nitric acid in wet digestion method. The levels of selected heavy metals in four species of fish and seawater from Pulau Indah coastal area were determined using Inductive Coupled Plasma Mass Spectrometer (ICPMS) after dilution to the samples. In general, the quality of water at Pulau Indah is lower than Malaysia Marine Water Quality Standard except for few locations were higher than the maximum permissible levels. The concentration of heavy metals which are lead (Pb), copper (Cu), zinc (Zn) and uranium (U) in water samples are in the range of 0.36-5.43 µg/L, 75.20-621.58 µg/L, 11.92-30.52 µg/L, and 4.00-4.65 µg/L respectively. While the results of the four selected fish showed the following order of abundance Zn> U> Cu> Pb. Transfer factor (TF) of heavy metals in fish tissue of selected fish species from the water was discussed. However, the observed metal concentration in the sample tissue did not exceed the allowable limit of Malaysian Food Act (1983) and Regulation (1985). Therefore, it is safe for human consumption. Moreover, the pollution levels of these heavy metals were also compared with other studies. This present study can also be used to evaluate the safety dose uptake level of marine biota as well as to monitor environmental health.

54 ENVIRONMENTAL SCIENCES↗

Lunar Node 1 and Beyond

Lunar Node 1 (LN-1) is an S-band Navigation beacon for lunar applications that was recently designed and built at MSFC. As part of NASA's Commercial Lunar Payload Services initiative, this beacon will be delivered to the moon's surface on Intuitive Machine's NOVA-C lunar lander in November 2021. During this mission, LN-1’s goal will be to demonstrate navigation technologies that can support local surface and orbital operations around the moon, enabling autonomy which would decrease dependency on heavily utilized Earth based assets like the Deep Space Network. To do this, LN-1’s design leverages Cubesat components as well as the Multi-spacecraft Autonomous Positioning System (MAPS) algorithms, which enable the autonomous spacecraft positioning through communication-integrated navigation measurements. In addition to demonstrating the MAPS payload, the radio will also be used in standard tone-based non-coherent ranging and Doppler tracking to provide an alternate approaches and comparisons for navigation performance. LN-1 will represent a single node in a potential greater MAPS network of assets. While LN-1 awaits launch to demonstrate this initial use of one-way navigation, designs are already under way for proposed subsequent missions like LN-2 to enable expanded capability. The next steps in these missions seek to include a receive capability to allow two-way ranging support with other operational spacecraft in the lunar vicinity, and to provide some component upgrades related to the radio, power, and thermal systems that will improve the longevity of the payload in the harsh lunar environment. The LN-1 design details, status, and potential forward work with mission like LN-2 will be outlined in this presentation.

Evan John Anzalone↗

A new interpretation of deformation rates in the Snake River Plain and adjacent basin and range regions based on GPS measurements

We evaluate horizontal Global Positioning System (GPS) velocities together with geologic, volcanic, and seismic data to interpret extension, shear, and contraction within the Snake River Plain and the Northern Basin and Range Province, U.S.A. We estimate horizontal surface velocities using GPS data collected at 385 sites from 1994 to 2009 and present an updated velocity field within the Stable North American Reference Frame (SNARF). Our results show an ENE-oriented extensional strain rate of 5.9 {+-} 0.7 x 10{sup -9} yr{sup -1} in the Centennial Tectonic belt and an E-oriented extensional strain rate of 6.2 {+-} 0.3 x 10{sup -9} yr{sup -1} in the Intermountain Seismic belt combined with the northern Great Basin. These extensional strain rates contrast with the regional north-south contraction of -2.6 {+-} 1.1 x 10{sup -9} yr{sup -1} calculated in the Snake River Plain and Owyhee-Oregon Plateau over a 125 x 650 km region. Tests that include dike-opening reveal that rapid extension by dike intrusion in volcanic rift zones does not occur in the Snake River Plain at present. This slow internal deformation in the Snake River Plain is in contrast to the rapidly-extending adjacent Basin and Range provinces and implies shear along boundaries of the Snake River Plain. We estimate right-lateral shear with slip rates of 0.5-1.5 mm/yr along the northwestern boundary adjacent to the Centennial Tectonic belt and left-lateral oblique extension with slip rates of <0.5 to 1.7 mm/yr along the southeastern boundary adjacent to the Intermountain Seismic belt. The fastest lateral shearing occurs near the Yellowstone Plateau where strike-slip focal mechanisms and faults with observed strike-slip components of motion are documented. The regional GPS velocity gradients are best fit by nearby poles of rotation for the Centennial Tectonic belt, Idaho batholith, Snake River Plain, Owyhee-Oregon Plateau, and central Oregon, indicating that clockwise rotation is driven by extension to the south in the Great Basin and not localized extension in the Basin and Range or Yellowstone hotspot volcanism. We propose that the GPS velocity field reflects the regional deformation pattern since at least 15-12 Ma, with clockwise rotation over the Northern Basin and Range Province consistent with Basin and Range extension initiating 16 Ma. The region modified by hotspot volcanism has a low-strain rate. If we assume the low rate of deformation is reflected in the length of time between eruptions on the order of 10{sup 4} to >10{sup 6} yrs, the low-strain field in the Snake River Plain and Owyhee-Oregon Plateau would extend through the Quaternary.

58 GEOSCIENCES↗

Three Dimensional Characterization of Defects by Ultrasonic Time-of-Flight Diffraction (ToFD) Technique

Ultrasonic time-of-flight diffraction (ToFD) technique has high accuracy in locating and sizing discontinuities. The primary reason for this accuracy is the use of time instead of amplitude for measurement of the depth and size of discontinuities. Despite the many advantages of ToFD, it suffers from a number of shortcomings, the most notable one being its two-dimensional character. The goal of this paper is to develop an algorithm, as a prerequisite, to extend ToFD measurements to a three-dimensional space. For this purpose, a combination of multiple transmitting and receiving probes is proposed instead of just one pair commonly used in ToFD measurements. The approach for locating and sizing defects in a 3D space follows the methods used in radar and acoustic positioning systems. Non-iterative techniques are used for positioning a single source (defect) based on signals collected by several transducers. The estimation formula, in the form of a closed-form solution, is derived by linear least-squares minimization. In addition to existing conventional passive algorithms, a new active algorithm is also proposed for the general arrangement of transducers. This algorithm is tested on a steel specimen having an artificially implanted discontinuity and the three-dimensional location of the defect is estimated.

42 ENGINEERING↗

Onboard utilization of ground control points for image correction. Volume 3: Ground control point simulation software design

The software developed to simulate the ground control point navigation system is described. The Ground Control Point Simulation Program (GCPSIM) is designed as an analysis tool to predict the performance of the navigation system. The system consists of two star trackers, a global positioning system receiver, a gyro package, and a landmark tracker.

Source record↗

Inertial/multisensor navigation

A Multisensor Navigation System as proposed by the Ohio University Avionics Engineering Center is illustrated. The proposed system incorporates radio (Lorac-C), satellite (Global Positioning System) and an inertial navigation system (INS). The inertial part of the system will be of a low grade since the INS will be used primarily for filtering the GPS data and for short term stability. Loran-C and GPS will be used for long term stability.

Alikiotis, Dimitri↗

Design and predicted performance of the GPS demonstration receiver for the NASA Topex satellite

NASA's Ocean Topography Experiment (Topex) satellite will perform topographic ocean mapping. Topex will carry an experimental tracking system based on the use of GPS (Global Positioning System). An onboard GPS Demonstration Receiver (GPSDR) will be used with a network of up to ten receivers at precisely known ground sites. Following a brief overview of the Topex mission and its derived accuracy requirements, the authors describe the design of the GPSDR. The major hardware and software components are reviewed and discussed. Projected receiver tracking and navigation performance measures are presented and discussed.

Carson, Lance↗

Reducing S/A Errors In TOPEX GPS Measurements

Proposed scheme for postprocessing of data acquired by receivers monitoring broadcasts from Global Positioning System (GPS) satellites reduces those errors in computed positions of receivers caused by pseudorandom offsets introduced into transmitted signals. Offsets canceled exactly with help of codes available to privileged users and intended to degrade accuracies available to nonpriviledged users, pursuant to policy called "selective availability" (S/A). Proposed scheme devised primarily for GPS receivers aboard TOPEX satellite and at associated ground stations.

Wu, Sien-Chong↗

Initial Results of the Software-Driven Navigation for Station Experiment

To enable the next generation of robotic and human exploration of the solar system, improvements are needed to enable robust and accurate autonomous navigation. The purpose of this work is to take advantage of the growth in and use of software-defined platforms to incorporate additional navigation capability on existing assets, while also incorporating with new vehicle designs. The Software-driven Navigation for Station Experiment focuses on implementing two soft solutions to this: transmitting pseudolite signals to perform ranging and Doppler measurements as part of the signal coding (similar to underlying Global Navigation Satellite System approaches), and the Multi-spacecraft Autonomous Positioning System, which uses existing communication protocols to embed navigation and timing information to be shared among all assets in a peer-to-peer network. These technologies were implemented on the SCaN Testbed onboard the International Space Station and exercised over the course of mid-June and late-July 2018. This paper will discuss the operational architecture, experiment plan, and initial results from the data collected. One of the key conclusions of this work is the strong need for stable accurate clock synchronization across the dispersed space network.

Anzalone, Evan J.↗

Defining the upper boundary of the Asian Tropopause Aerosol Layer (ATAL) using the static stability

The Asian Tropopause Aerosol Layer (ATAL) is located in the Upper Troposphere and Lower Stratosphere (UTLS) during the Asian Summer Monsoon. However, what dynamical feature separates the ATAL from the well-known stratospheric ‘Junge layer’ is not yet clear. In this study, using the in-situ (Radiosonde, Ozonesonde, backscatter sonde and cryogenic frost-point hygrometer) observations from multiple locations in India (Gadanki (13.45° N, 79.18° E), Hyderabad (17.47° N, 78.58° E) and Varanasi (25.27° N, 82.99° E)) and multi-satellite observations ((Cloud-Aerosol Lidar and Infrared Pathfinder Observation, (CALIPSO), Atmospheric Chemistry Experiment (ACE) Fourier Transform Spectrometer (FTS) and Constellation Observation System for Meteorology, Ionosphere and Climate (COSMIC) Global Position System (GPS) Radio Occultation (RO) (COSMIC GPS-RO)) we show that the ATAL can exist up to the layer of maximum stability (LmaxS), located a few kilometers above the tropopause, determined using the square of Brunt Väisäla frequency. These in-situ observations over Indian stations collected during the ISRO-NASA Balloon Measurement Campaigns of the Asian Tropopause Aerosol Layer (BATAL) show that the ATAL top can reach up to ∼442 K potential temperature level over the Indian region. The LmaxS delineated from COSMIC GPSRO observations over the Asian Summer Monsoon Anticyclone (ASMA) region indicates that the top of ATAL can reach up to 454 K potential temperature level, which is lower than the earlier Lagrangian transport model predicted 460 K. The temperature inversion at LmaxS acts as a lid and constrains the direct transport of aerosols to higher altitudes.

S.T. Akhil Raj↗

A Research Testbed for Experimental Connectivity and Automation in Cars

Cyber-physical systems (CPS) are engineered systems in which the computational components and physical components of the system are interdependent and deeply linked. Discovery and development of CPS technologies are changing the way people interact with engineered systems. To demonstrate this point, consider the Global Positioning System (GPS) which revolutionized personal mobility. Its research origins stem from the US Department of Defense in 1973 for military use. By 2000 limitations on civilian consumption of GPS service were lifted. Immediately, personal GPS products were shipped for in-car navigation systems. Soon after, GPS receivers were embedded into mobile phones with the introduction of the Nokia N95 and Apple iPhone for maps and turn-by-turn navigation. With the benefit of hindsight we can see that GPS has become a cornerstone technology of our daily life. Satellite-based navigation has gone from a radical space technology, to a matter of uninteresting availability; it is the typical way that people navigate through roadways now. The combination of the satellite infrastructure, the integration of receiver modules, and powerful maps applications has significantly changed mobility in the 21st century.

42 ENGINEERING↗