Search NASA⌕ Search

SEARCH · Search NASA

Results for “Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

WINDOWAC (Wing Design Optimization With Aeroelastic Constraints): Program manual

User and programer documentation for the WIDOWAC programs is given. WIDOWAC may be used for the design of minimum mass wing structures subjected to flutter, strength, and minimum gage constraints. The wing structure is modeled by finite elements, flutter conditions may be both subsonic and supersonic, and mathematical programing methods are used for the optimization procedure. The user documentation gives general directions on how the programs may be used and describes their limitations; in addition, program input and output are described, and example problems are presented. A discussion of computational algorithms and flow charts of the WIDOWAC programs and major subroutines is also given.

Haftka, R. T.↗
NASA NTRS1974

Six degree of freedom FORTRAN program, ASTP docking dynamics, users guide

The digital program ASTP Docking Dynamics as outlined is intended to aid the engineer using the program to determine the docking system loads and attendant vehicular motion resulting from docking two vehicles that have an androgynous, six-hydraulic-attenuator, guide ring, docking interface similar to that designed for the Apollo/Soyuz Test Project (ASTP). This program is set up to analyze two different vehicle combinations: the Apollo CSM docking to Soyuz and the shuttle orbiter docking to another orbiter. The subroutine modifies the vehicle control systems to describe one or the other vehicle combinations; the rest of the vehicle characteristics are changed by input data. To date, the program has been used to predict and correlate ASTP docking loads and performance with docking test program results from dynamic testing. The program modified for use on IBM 360 computers. Parts of the original docking system equations in the areas of hydraulic damping and capture latches are modified to better describe the detail design of the ASTP docking system.

Mount, G. O., Jr.↗
NASA NTRS1972

TRW vortex-lattice method subsonic aerodynamic analysis for multiple-lifting-surfaces (N. surface) TRW program number HA010B

The program was designed to provide solutions of engineering accuracy for determining the aerodynamic loads on single- or multiple-lifting-surface configurations that represent vehicles in subsonic flight, e.g., wings, wing-tail, wing-canard, lifting bodies, etc. The preparation is described of the input data, associated input arrangement, and the output format for the program data, including specification of the various operational details of the program such as array sizes, tape numbers utilized, and program dumps. A full description of the underlying theory used in the program development and a review of the program qualification tests are included.

Gomez, A. V.↗
NASA NTRS1975

STICAP: A linear circuit analysis program with stiff systems capability. Volume 1: Theory manual

STICAP (Stiff Circuit Analysis Program) is a FORTRAN 4 computer program written for the CDC-6400-6600 computer series and SCOPE 3.0 operating system. It provides the circuit analyst a tool for automatically computing the transient responses and frequency responses of large linear time invariant networks, both stiff and nonstiff (algorithms and numerical integration techniques are described). The circuit description and user's program input language is engineer-oriented, making simple the task of using the program. Engineering theories underlying STICAP are examined. A user's manual is included which explains user interaction with the program and gives results of typical circuit design applications. Also, the program structure from a systems programmer's viewpoint is depicted and flow charts and other software documentation are given.

Cooke, C. H.↗
NASA NTRS1976

A computer program to predict rotor rotational noise of a stationary rotor from blade loading coefficient

The programing language used is FORTRAN IV. A description of all main and subprograms is provided so that any user possessing a FORTRAN compiler and random access capability can adapt the program to his facility. Rotor blade surface-pressure spectra can be used by the program to calculate: (1) blade station loading spectra, (2) chordwise and/or spanwise integrated blade-loading spectra, and (3) far-field rotational noise spectra. Any of five standard inline functions describing the chordwise distribution of the blade loading can be chosen in order to study parametrically the acoustic predictions. The program output consists of both printed and graphic descriptions of the blade-loading coefficient spectra and far-field acoustic spectrum. The results may also be written on binary file for future processing. Examples of the application of the program along with a description of the rotational noise prediction theory on which the program is based are also provided.

Ramakrishnan, R.↗
NASA NTRS1976

AAFE RADSCAT data reduction programs user's guide

Theory, design and operation of the computer programs which automate the reduction of joint radiometer and scatterometer observations are presented. The programs reduce scatterometer measurements to the normalized scattering coefficient; whereas the radiometer measurements are converted into antenna temperatures. The programs are both investigator and user oriented. Supplementary parameters are provided to aid in the interpretation of the observations. A hierarchy of diagnostics is available to evaluate the operation of the instrument, the conduct of the experiments and the quality of the records. General descriptions of the programs and their data products are also presented. This document therefore serves as a user's guide to the programs and is therefore intended to serve both the experimenter and the program operator.

Claassen, J. P.↗
NASA NTRS1970

Programmer's manual for the Banning artwork program

The document is intended to serve as the programmer's Manual for the Banning Artwork Program. A detailed description of the internal logic and flow of the Artwork Program has been included in this report. It is recommended that every user review this manual in order to receive an appreciation of the functions performed by the Artwork Program; however, the User's Manual for the Artwork Program contains sufficient information to allow the designer/engineer to efficiently use the Artwork Program. Before beginning a detailed study of this Programmer's Manual, the reader should have a complete understanding of the contents of the User's Manual for the Banning Artwork Program. It is assumed that the programmer using this manual has a working knowledge of FORTRAN IV.

Taylor, J. F.↗
NASA NTRS1976

Timeline Analysis Program (TLA-1)

The Timeline Analysis Program (TLA-1) was described. This program is a crew workload analysis computer program that was developed and expanded from previous workload analysis programs, and is designed to be used on the NASA terminal controlled vehicle program. The following information is described: derivation of the input data, processing of the data, and form of the output data. Eight scenarios that were created, programmed, and analyzed as verification of this model were also described.

Miller, K. H.↗
NASA NTRS1976

ACCESS 1: Approximation Concepts Code for Efficient Structural Synthesis program documentation and user's guide

The program documentation and user's guide for the ACCESS-1 computer program is presented. ACCESS-1 is a research oriented program which implements a collection of approximation concepts to achieve excellent efficiency in structural synthesis. The finite element method is used for structural analysis and general mathematical programming algorithms are applied in the design optimization procedure. Implementation of the computer program, preparation of input data and basic program structure are described, and three illustrative examples are given.

Miura, H.↗
NASA NTRS1975

Orbital lifetime capabilities of digital programs RMDAP and Monster

The orbital lifetime study capabilities of the Reference Mission Design and Analysis Program (RMDAP) and the Apollo Mission Planning and Real-Time Rendezvous Support Program (ARRS or Monster) were studied. Output and program versatility, that is, the methods with which each program permits user definition of the major factors affecting orbital lifetimes, are discussed. In addition, orbit maintenance is examined and sample runs are compared. Since each program has special capabilities in different areas, it is left to the investigator's discretion as to the preferable program to employ for his lifetime study purposes.

Source record↗
NASA NTRS1974

Shuttle user analysis (study 2.2): Volume 3. Business Risk And Value of Operations in space (BRAVO). Part 4: Computer programs and data look-up

Computer program listings as well as graphical and tabulated data needed by the analyst to perform a BRAVO analysis were examined. Graphical aid which can be used to determine the earth coverage of satellites in synchronous equatorial orbits was described. A listing for satellite synthesis computer program as well as a sample printout for the DSCS-11 satellite program and a listing of the symbols used in the program were included. The APL language listing for the payload program cost estimating computer program was given. This language is compatible with many of the time sharing remote terminals computers used in the United States. Data on the intelsat communications network was studied. Costs for telecommunications systems leasing, line of sight microwave relay communications systems, submarine telephone cables, and terrestrial power generation systems were also described.

Source record↗
NASA NTRS1977

A Computer Program for Calculating Three-Dimensional Compressible Laminar and Turbulent Boundary Layers on Arbitrary Wings

A computer program for calculating three dimensional compressible laminar and turbulent boundary layers on arbitrary wings is described and presented. The computer program consists of three separate programs, namely, a geometry program to represent the wing analytically, a velocity program to compute the external velocity components from a given experimental pressure distribution and a finite difference boundary layer method to solve the governing equations for compressible flows. To illustrate the usage of the computer program, three different test cases are presented and the preparation of the input data as well as the computed output data is discussed in some detail.

Cebeci, T.↗
NASA NTRS1977

Telemetry and data relay for manned space programs

Previously and currently planned methods of transferring or relaying telemetered information from a remote receiving station to the Mission Control Center, at the National Aeronautics and Space Administration Lyndon B. Johnson Space Center, are discussed. The data flow techniques of the Apollo Program (fixed formats), the Skylab Program (data compression), and the Space Shuttle Program (data throughput) are defined and analyzed according to their advantages and deficiencies from an operations viewpoint. Excluded from the data flow technique discussions are command data, tracking data, television data, and Teletype and Datafax messages. Voice transmissions are addressed in the Space Shuttle Program discussion because they form a part of the telemetry data stream. The tradeoffs between actual data flow requirements and existing communications limitations are addressed for each of these programs. Finally, a short discussion of current problem areas in the planned ground data transmission system for the Space Shuttle Program is presented.

Anson, K. W.↗
NASA NTRS1977

PASS: A computer program for Preliminary Aircraft Structural Synthesis

A computer code for Preliminary Aircraft Structural Synthesis provides rapid and accurate analysis for aircraft structures that can be adequately modeled by beam finite elements. The philosophy used in developing the program was to provide a basic framework that can be used for structural synthesis. It is anticipated that a user will need to add detail to this framework in order to perform his specific task. With this philosophy in mind, the program was written so that it is easily divided into segments, thereby making it readily adaptable. The theoretical portion of this manual describes the basic structure of the program and details the development of the unique beam element that is used. The present capability of the algorithm is stated and suggestions are made regarding enhancements to this capability. User information is also given that provides an overview of the program's construction, identifies the required inputs, describes the program output, provides some comments on the program use, and exhibits results for a simple example.

Johnson, E. H.↗
NASA NTRS1977

PLANS; a finite element program for nonlinear analysis of structures. Volume 2: User's manual

The PLANS system, rather than being one comprehensive computer program, is a collection of finite element programs used for the nonlinear analysis of structures. This collection of programs evolved and is based on the organizational philosophy in which classes of analyses are treated individually based on the physical problem class to be analyzed. Each of the independent finite element computer programs of PLANS, with an associated element library, can be individually loaded and used to solve the problem class of interest. A number of programs have been developed for material nonlinear behavior alone and for combined geometric and material nonlinear behavior. The usage, capabilities, and element libraries of the current programs include: (1) plastic analysis of built-up structures where bending and membrane effects are significant, (2) three dimensional elastic-plastic analysis, (3) plastic analysis of bodies of revolution, and (4) material and geometric nonlinear analysis of built-up structures.

Pifko, A.↗
NASA NTRS1976

Spacecraft charging investigation - A joint research and technology program

A jointly planned U.S. Air Force-NASA program has been established to investigate the spacecraft charging phenomenon that has caused electronic anomalies in satellites in geosynchronous orbits. The objectives of this program are to provide design criteria, techniques, and test methods to insure control of absolute and differential charging of spacecraft surfaces. These objectives will be updated continuously over the next four years as data become available from the combined contractual and in-house programs. The geosynchronous altitude environment will be defined, ground and flight tests will be conducted, and materials and charge control techniques will be developed as required. The ultimate output of the program will be a spacecraft charging design criteria and test specification document. The program will be coordinated by a spacecraft charging program review group which has both Air Force and NASA representation.

Lovell, R. R.↗
NASA NTRS1976

Status review of NASA programs for reducing aircraft gas turbine engine emissions

The paper describes and discusses the results from some of the research and development programs for reducing aircraft gas turbine engine emissions. Although the paper concentrates on NASA programs only, work supported by other U.S. government agencies and industry has provided considerable data on low emission advanced technology for aircraft gas turbine engine combustors. The results from the two major NASA technology development programs, the ECCP (Experimental Clean Combustor Program) and the PRTP (Pollution Reduction Technology Program), are presented and compared with the requirements of the 1979 U.S. EPA standards. Emission reduction techniques currently being evaluated in these programs are described along with the results and a qualitative assessment of development difficulty.

Rudey, R. A.↗