Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum dynamics simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Engineered thermalization and cooling of quantum many-body systems

We develop a scheme for engineering genuine thermal states in analog quantum simulation platforms by coupling local degrees of freedom to driven, dissipative ancilla pseudospins. We demonstrate the scheme in a many-body quantum spin lattice simulation setting. A Born-Markov master equation describing the dynamics of the many-body system is developed, and we show that if the ancilla energies are periodically modulated, with a carefully chosen hierarchy of timescales, one can effectively thermalize the many-body system. Through analysis of the time-dependent dynamical generator, we determine the conditions under which the true thermal state is an approximate dynamical fixed point for general system Hamiltonians. Finally, we evaluate the thermalization protocol through numerical simulation and discuss prospects for implementation on current quantum simulation hardware.

36 MATERIALS SCIENCE↗

Predicting Open Quantum Dynamics with Data-Informed Quantum-Classical Dynamics

We introduce a data-informed quantum-classical dynamics (DIQCD) approach for predicting the evolution of an open quantum system. The equation of motion in DIQCD is a Lindblad equation with a flexible, time-dependent Hamiltonian that can be optimized to fit sparse and noisy data from local observations of an extensive open quantum system. We demonstrate the accuracy and efficiency of DIQCD for both experimental and simulated quantum devices. We show that DIQCD can predict entanglement dynamics of ultracold molecules (calcium fluoride) in optical tweezer arrays. DIQCD also successfully predicts carrier mobility in organic semiconductors (rubrene) with accuracy comparable to nearly exact numerical methods.

Lindblad equation↗

Atomistic simulation of Er irradiation induced defects in GaN nanowires

Classical molecular dynamics simulation was used to irradiate a GaN nanowire with rear-earth erbium (Er). Ten cumulative irradiations were done using an ion energy of 37.5 keV on a 10 × 10 nm²surface area which corresponds to a fluence of 1 × 10¹³ cm⁻². We studied the location and types of defects produced in the irradiation. Er implantation leads to a net positive (expansion) strain in the nanowire and especially at the top region a clear expansion has been observed in the lateral and axial directions. The lattice expansion is due to the hydrostatic strain imposed by a large number of radiation induced defects at the top of the NW. Due to the large surface-to-volume ratio, most of the defects were concentrated at the surface region, which suggests that the experimentally observed yellow luminescence (YL) in ion implanted GaN NWs arises from surface defects. We observed big clusters of point defects and vacancy clusters which are correlated with stable lattice strain and the YL band, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Computational Study of Symmetric Methylation on Histone Arginine Catalyzed by Protein Arginine Methyltransferase PRMT5 through QM/MM MD and Free Energy Simulations

Protein arginine methyltransferases (PRMTs) catalyze the transfer of the methyl group from S-adenosyl-l-methionine (AdoMet) to arginine residues. There are three types of PRMTs (I, II and III) that produce different methylation products, including asymmetric dimethylarginine (ADMA), symmetric dimethylarginine (SDMA) and monomethylarginine (MMA). Since these different methylations can lead to different biological consequences, understanding the origin of product specificity of PRMTs is of considerable interest. In this article, the quantum mechanical/molecular mechanical (QM/MM) molecular dynamics (MD) and free energy simulations are performed to study SDMA catalyzed by the Type II PRMT5 on the basis of experimental observation that the dimethylated product is generated through a distributive fashion. The simulations have identified some important interactions and proton transfers during the catalysis. Similar to the cases involving Type I PRMTs, a conserved Glu residue (Glu435) in PRMT5 is suggested to function as general base catalyst based on the result of the simulations. Moreover, our results show that PRMT5 has an energetic preference for the first methylation on N-1 followed by the second methylation on a different -guanidino nitrogen of arginine (N-2).The first and second methyl transfers are estimated to have free energy barriers of 19-20 and 18-19 kcal/mol respectively. The computer simulations suggest a distinctive catalytic mechanism of symmetric dimethylation that seems to be different from asymmetric dimethylation.

ARABIDOPSIS↗

Particle production in ultrastrong-coupling waveguide QED

Understanding large-scale interacting quantum matter requires dealing with the huge number of quanta that are produced by scattering even a few particles against a complex quantum object. Prominent examples are found from high energy cosmic ray showers, to the optical or electrical driving of degenerate Fermi gases. We tackle this challenge in the context of many-body quantum optics, as motivated by the recent developments of circuit quantum electrodynamics at ultrastrong coupling. The issue of particle production is addressed quantitatively with a simple yet powerful concept rooted in the quantum superposition principle of multimode coherent states. This key idea is illustrated by the study of multi-photon emission from a single two-level artificial atom coupled to a high impedance waveguide, driven by a nearly-monochromatic coherent tone. Furthermore, we find surprisingly that the off-resonant inelastic emission lineshape is dominated by broadband particle production, due to the large phase space associated with contributions that do not conserve the number of excitations. Such frequency conversion processes produce striking signatures in time correlation measurements, which can be tested experimentally in quantum waveguides. Furthermore, these ideas open new directions for the simulation of a variety of physical systems, from polaron dynamics in solids to complex superconducting quantum architectures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liouvillian dynamics of the open Schwinger model: String breaking and kinetic dissipation in a thermal medium

Understanding the dynamics of bound state formation is one of the fundamental questions in confining quantum field theories such as Quantum Chromodynamics (QCD). One hadronization mechanism that has garnered significant attention is the breaking of a string initially connecting a fermion and an antifermion. Deepening our understanding of real-time string-breaking dynamics with simpler, lower dimensional models like the Schwinger model can improve our understanding of the hadronization process in QCD and other confining systems found in condensed matter and statistical systems. Here in this paper, we consider the string-breaking dynamics within the Schwinger model and investigate its modification inside a thermal medium, treating the Schwinger model as an open quantum system coupled to a thermal environment. Within the regime of weak coupling between the system and environment, the real-time evolution of the system can be described by a Lindblad evolution equation. We analyze the Liouvillian gaps of this Lindblad equation and the time dependence of the system’s von Neumann entropy. We observe that the late-time relaxation rate decreases as the environment correlation length increases. Moreover, when the environment correlation length is infinite, the system exhibits two steady states, one in each of the sectors with definite charge-conjugation-parity (CP) quantum numbers. For parameter regimes where an initial string breaks in vacuum, we observe a delay of the string breaking in the medium, due to kinetic dissipation effects. Conversely, in regimes where an initial string remains intact in vacuum time evolution, we observe string breaking (melting) in the thermal medium. We further discuss how the Liouvillian dynamics of the open Schwinger model can be simulated on quantum computers and provide an estimate of the associated Trotter errors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extending molecular simulation time scales: Parallel in time integrations for high-level quantum chemistry and complex force representations

Parallel in time simulation algorithms are presented and applied to conventional molecular dynamics (MD) and ab initio molecular dynamics (AIMD) models of realistic complexity. Assuming that a forward time integrator, f (e.g., Verlet algorithm), is available to propagate the system from time t{sub i} (trajectory positions and velocities x{sub i} = (r{sub i}, v{sub i})) to time t{sub i+1} (x{sub i+1}) by x{sub i+1} = f{sub i}(x{sub i}), the dynamics problem spanning an interval from t{sub 0}…t{sub M} can be transformed into a root finding problem, F(X) = [x{sub i} − f(x{sub (i−1})]{sub i} {sub =1,M} = 0, for the trajectory variables. The root finding problem is solved using a variety of root finding techniques, including quasi-Newton and preconditioned quasi-Newton schemes that are all unconditionally convergent. The algorithms are parallelized by assigning a processor to each time-step entry in the columns of F(X). The relation of this approach to other recently proposed parallel in time methods is discussed, and the effectiveness of various approaches to solving the root finding problem is tested. We demonstrate that more efficient dynamical models based on simplified interactions or coarsening time-steps provide preconditioners for the root finding problem. However, for MD and AIMD simulations, such preconditioners are not required to obtain reasonable convergence and their cost must be considered in the performance of the algorithm. The parallel in time algorithms developed are tested by applying them to MD and AIMD simulations of size and complexity similar to those encountered in present day applications. These include a 1000 Si atom MD simulation using Stillinger-Weber potentials, and a HCl + 4H{sub 2}O AIMD simulation at the MP2 level. The maximum speedup ((serial execution time)/(parallel execution time) ) obtained by parallelizing the Stillinger-Weber MD simulation was nearly 3.0. For the AIMD MP2 simulations, the algorithms achieved speedups of up to 14.3. The parallel in time algorithms can be implemented in a distributed computing environment using very slow transmission control protocol/Internet protocol networks. Scripts written in Python that make calls to a precompiled quantum chemistry package (NWChem) are demonstrated to provide an actual speedup of 8.2 for a 2.5 ps AIMD simulation of HCl + 4H{sub 2}O at the MP2/6-31G* level. Implemented in this way these algorithms can be used for long time high-level AIMD simulations at a modest cost using machines connected by very slow networks such as WiFi, or in different time zones connected by the Internet. The algorithms can also be used with programs that are already parallel. Using these algorithms, we are able to reduce the cost of a MP2/6-311++G(2d,2p) simulation that had reached its maximum possible speedup in the parallelization of the electronic structure calculation from 32 s/time step to 6.9 s/time step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Histidine methyltransferase SETD3 methylates structurally diverse histidine mimics in actin

Actin histidine N τ -methylation by histidine methyltransferase SETD3 plays an important role in human biology and diseases. Here, we report integrated synthetic, biocatalytic, biostructural, and computational analyses on human SETD3-catalyzed methylation of actin peptides possessing histidine and its structurally and chemically diverse mimics. Our enzyme assays supported by biostructural analyses demonstrate that SETD3 has a broader substrate scope beyond histidine, including N-nucleophiles on the aromatic and aliphatic side chains. Quantum mechanical/molecular mechanical molecular dynamics and free-energy simulations provide insight into binding geometries and the free energy barrier for the enzymatic methyl transfer to histidine mimics, further supporting experimental data that histidine is the superior SETD3 substrate over its analogs. This work demonstrates that human SETD3 has a potential to catalyze efficient methylation of several histidine mimics, overall providing mechanistic, biocatalytic, and functional insight into actin histidine methylation by SETD3.

59 BASIC BIOLOGICAL SCIENCES↗

Environmental Contributions to Proton Sharing in Protein Low-Barrier Hydrogen Bonds

Hydrogen bonds (H-bonds) are central to biomolecular structure and dynamics. Although H-bonds are typically characterized by well-defined proton positions, proton delocalization has been proposed to play a role in facilitating enzyme catalysis and allostery in some systems. Experimentally locating protons is difficult, hampering the study of proton mobility in H-bonds. We used neutron crystallography, atomic resolution X-ray bond length analysis, and large quantum mechanics/molecular mechanics-Born–Oppenheimer molecular dynamics (QM/MM-BOMD) simulations to comprehensively characterize the shared proton/deuteron in a Glu–Asp low-barrier hydrogen bond (LBHB) in the bacterial protein YajL that is a conventional H-bond in the homologous disease-associated human protein DJ-1. X-ray bond length analysis of protiated and perdeuterated DJ-1 and YajL shows no significant effect of deuteron substitution on these carboxylic acid-carboxylate H-bonds but does reveal an effect at the active site glutamic acid near a cysteine thiolate. Residues in an H-bonded network that might favor LBHB formation in YajL were interrogated by the mutation of homologous residues in DJ-1. A distal DJ-1 substitution increases proton delocalization in the Glu–Asp H-bond, demonstrating that mutations within extended H-bond networks can modulate proton transfer barriers in carboxylic acid-carboxylate H-bonds. In addition, proton mobility in the H-bond is correlated with dimer-spanning motions in the QM/MM-BOMD simulations of YajL and DJ-1. Our results show that proton delocalization can be tuned using combined bioinformatic, structural, and computational information, opening the possibility of using engineered proton delocalization as a probe of H-bonding environments and as a tool to test hypotheses about LBHB function.

Lin, Jiusheng [University of Nebraska, Lincoln, NE↗

The Interplay between Salt Association and the Dielectric Properties of Low Permittivity Electrolytes: The Case of LiPF 6 and LiAsF 6 in Dimethyl Carbonate

Here, we present evidence that the dielectric constant of an electrolyte solution can be effectively used to infer the association regime of the salt species from computational methods. As case studies, we consider the low dielectric constant solvent dimethyl carbonate with LiAsF 6 and LiPF 6 salts at low concentrations. Using both quantum “ab initio” methods as well classical molecular dynamics simulations, we elucidate the salt’s contribution to the dielectric constant as well as the dipolar relaxation times, which act as quantitative signatures. By comparing to previously published measurements, we provide strong evidence for the presence of contact-ion pairs at these low concentrations. Interestingly, these ion pairs increase the dielectric constant of the solution, allowing for significantly improved ionic conductivity as a function of salt concentrations. We also discuss the role of multimeric equilibrium species as contributors to the functional properties of designer electrolytes, such as dielectric properties of the solution and ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictions of Boron Phase Stability Using an Efficient Bayesian Machine Learning Interatomic Potential

Thermodynamic phase stability of three elemental boron allotropes, i.e., α-B, β-B, and γ-B, was investigated using a Bayesian interatomic potential trained via a sparse Gaussian process (SGP). SGP potentials trained with datasets from on-the-fly active learning achieve quantum mechanical level accuracy when employed in molecular dynamics simulations to predict wide-ranging thermodynamic, structural, and vibrational properties. The simulated phase diagram (500~1400 K and 0~16 GPa) agrees with experimental measurements. The SGP-based MD simulations also successfully predicted that the B13 defect is critical in stabilizing β-B below 700 K. At higher temperatures, the entropy becomes the dominant factor, making β-B the more stable phase over α-B. Furthermore, this Letter demonstrates that SGP potentials based on a training set consisting of defect-free-only systems could make correct predictions of defect-related phenomena in solid-state crystals, paving the path to investigate crystal phase stability and transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quantitative quantum-chemical analysis tool for the distribution of mechanical force in molecules

The promising field of mechanochemistry suffers from a general lack of understanding of the distribution and propagation of force in a stretched molecule, which limits its applicability up to the present day. In this article, we introduce the JEDI (Judgement of Energy DIstribution) analysis, which is the first quantum chemical method that provides a quantitative understanding of the distribution of mechanical stress energy among all degrees of freedom in a molecule. The method is carried out on the basis of static or dynamic calculations under the influence of an external force and makes use of a Hessian matrix in redundant internal coordinates (bond lengths, bond angles, and dihedral angles), so that all relevant degrees of freedom of a molecule are included and mechanochemical processes can be interpreted in a chemically intuitive way. The JEDI method is characterized by its modest computational effort, with the calculation of the Hessian being the rate-determining step, and delivers, except for the harmonic approximation, exact ab initio results. We apply the JEDI analysis to several example molecules in both static quantum chemical calculations and Born-Oppenheimer Molecular Dynamics simulations in which molecules are subject to an external force, thus studying not only the distribution and the propagation of strain in mechanically deformed systems, but also gaining valuable insights into the mechanochemically induced isomerization of trans-3,4-dimethylcyclobutene to trans,trans-2,4-hexadiene. The JEDI analysis can potentially be used in the discussion of sonochemical reactions, molecular motors, mechanophores, and photoswitches as well as in the development of molecular force probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mass density fluctuations in quantum and classical descriptions of liquid water

First principles molecular dynamics simulation protocol is established using revised functional of Perdew-Burke-Ernzerhof (revPBE) in conjunction with Grimme's third generation of dispersion (D3) correction to describe properties of water at ambient conditions. This study also demonstrates the consistency of the structure of water across both isobaric (NpT) and isothermal (NVT) ensembles. Going beyond the standard structural benchmarks for liquid water, we compute properties that are connected to both local structure and mass density fluctuations that are related to concepts of solvation and hydrophobicity. Finally, we directly compare our revPBE results to the Becke-Lee-Yang-Parr (BLYP) plus Grimme dispersion corrections (D2) and both the empirical fixed charged model (SPC/E) and many body interaction potential model (MB-pol) to further our understanding of how the computed properties herein depend on the form of the interaction potential.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nuclear-Electronic Orbital Ehrenfest Dynamics

The recently developed real-time nuclear-electronic orbital (RT-NEO) approach provides an elegant framework for treating electrons and selected nuclei, typically pro- tons, quantum mechanically in nonequilibrium dynamical processes. However, the RT-NEO approach neglects the motion of the other nuclei, preventing a complete de- scription of the coupled nuclear-electronic dynamics and spectroscopy. In this work, we describe the dynamical interaction between the other nuclei and the electron-proton subsystem with the mixed quantum-classical Ehrenfest dynamics method. The NEO- Ehrenfest approach propagates the electrons and quantum protons in a time-dependent variational framework, while the remaining nuclei move classically on the correspond- ing average electron-proton vibronic surface. This approach includes the non-Born- Oppenheimer eects between the electrons and quantum protons with RT-NEO and between the classical nuclei and the electron-proton subsystem with Ehrenfest dynam- ics. Spectral features for vibrational modes involving both quantum and classical nuclei are resolved from the time-dependent dipole moments. Moreover, nuclear quantum ef- fects are included directly in nonadiabatic dynamics simulations. The excited state intramolecular proton transfer in the o-hydroxybenzaldehyde molecule is shown to be faster and to exhibit a larger kinetic isotope eect with NEO-Ehrenfest compared to classical Ehrenfest dynamics. This work shows that the NEO-Ehrenfest method is a powerful tool to study dynamical processes with coupled electronic and nuclear degrees of freedom.

Zhao, Luning↗

Vapor–liquid equilibrium of water with the MB-pol many-body potential

Among the many existing molecular models of water, the MB-pol many-body potential has emerged as a remarkably accurate model, capable of reproducing thermodynamic, structural, and dynamic properties across water's solid, liquid, and vapor phases. In this work, we assessed the performance of MB-pol with respect to an important set of properties related to vapor-liquid coexistence and interfacial behavior. Through direct coexistence classical molecular dynamics simulations at temperatures of 400 K < T < 600 K, we calculated properties such as equilibrium coexistence densities, vapor-liquid interfacial tension, vapor pressure, and enthalpy of vaporization and compared the MB-pol results to experimental data. We also compared rigid vs fully flexible variants of the MB-pol model and evaluated system size effects for the properties studied. We found that the MB-pol model predictions are in good agreement with experimental data, even for temperatures approaching the vapor-liquid critical point; this agreement was largely insensitive to system sizes or the rigid vs flexible treatment of the intramolecular degrees of freedom. Furthermore, these results attest to the chemical accuracy of MB-pol and its high degree of transferability, thus enabling MB-pol's application across a large swath of water's phase diagram.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of the dynamical magnetization state on spin transfer

We utilize simulations of electron scattering by a chain of dynamical quantum spins to analyze the interplay between the spin transfer effect and the magnetization dynamics.We show that the complex interactions between the spin-polarized electrons and the dynamical states of the local spins can be decomposed into separate processes involving electron reflection and transmission, as well as absorption and emission of magnons—the quanta of magnetization dynamics. Analysis shows that these processes are substantially constrained by the energy and momentum conservation laws, resulting in a significant dependence of spin transfer on the electron’s energy and the dynamical state of the local spins. Here, our results suggest that exquisite control of spin transfer efficiency and of the resulting dynamical magnetization states may be achievable by tailoring the spectral characteristics of the conduction electrons and of the magnetic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of internal magnetic field on collective flow in heavy ion collisions at intermediate energies

The properties of nuclear matter under extreme conditions of high temperature, density, and isospin asymmetry have attracted wide attention in recent years. At present, heavy ion reactions in combination with corresponding model simulations are one of the most important ways to investigate this subject. It is known that a strong magnetic field can be created in heavy ion collisions. However, its effect on the motion of charged particles is usually neglected in previous transport model simulations. In this work, within the ultrarelativistic quantum molecular dynamics (UrQMD) model, the temporal evolution and spatial distribution of the internal magnetic field are calculated. The magnetic field strength is found to reach about eB ≈ 470 MeV 2 (B ≈ 8 × 10 16 G) for Au + Au collisions at E lab = 1 GeV/nucleon with impact parameter of 7 fm. The magnetic field in Cu + Au collisions exhibits somewhat different spatial distribution from that in Au + Au collisions. The magnetic field is found to affect the directed flow of pions at forward and backward rapidities to some extent, dependent of the impact parameter and beam energy while the effect on the elliptic flow is small. In addition, the effects of the magnetic field on the π – /π + ratio over the whole rapidity range and the elliptic flow difference $v$$^{n}_{2}$–$v$$^{p}_{2}$ between neutrons and protons at forward and backward rapidities are on the same order as those from the nuclear symmetry energy. Here, the $v$$^{n}_{2}$–$v$$^{p}_{2}$ difference in the midrapidity region is not strongly affected by the magnetic field, and the total π – /π + yield ratio is immune to it. It is advisable to include the magnetic field effects in future studies using pion flow, pion yield ratio, and nucleon elliptic flow difference to probe the symmetry energy at super saturation densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗